Agriculture Government Departments Closing in 5 days TDR #58381723

Tender For Supply, Installation, Testing and Commissioning Of 01 Nos. 16 Mtr. Highmast Lighting System With 200W Led Flood Light Etc. Works At S.M.Y. Tarkulwa (Deoria)

Issued by Government Departments · Gorakhpur, Uttar Pradesh
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
43000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Gorakhpur → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Supply, Installation, Testing and Commissioning Of 01 Nos. 16 Mtr. Highmast Lighting System With 200W Led Flood Light Etc. Works At S.M.Y. Tarkulwa (Deoria)

BOQ

Name of Work:- S/I/T/C of 01 Nos. 16 mtr. Highmast Lighting System with 200w LED flood light etc. Works at S.M.Y. Tarkulwa (Deoria)
Sl. No. Item Description
1Supply and fixing of 16 mtr. High mast pole of approved make with rising system, hot dip Galvanized inside & outside, having pole sheet thickness 4mm, top dia minimum 150 mm, bottom dia minimum 360mm, base plate 32 mm. thick, suitable for wind velocity as per IS 875 part 3 & having no. circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes, 1.5 HP power tool motor, 3 point suspension with steel wire rope 6 mm. dia double drum which including making suitable foundation as per manufacture drawing & site requirement along with foundation bolts, nuts, washers, anchors, plates etc. Complete in all respect as per direction and satisfaction to the Engineer-in-charge. (S.I. No. 21.3.1)
2Supply and fixing of single unit LED aviation obstruction light complete with transformer and LED spiral etc. complete in all respects. Cat AAA( S.I. No. 409)
3S/F of LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy >135 lm/Watt) Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement., suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin) , SDCM(Standard Deviation Colour Matching) 135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). 200 Watt Flood Light (DSR 8.17.5)
4S/F of following capacity of automatic street light cubical control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors HRC fuses Isolating switch Metering instrument & instrument box with CTs etc . In case of TPN complete in all respect. 25Amp TPN (S.I. No. 807 e ii)
5S/W of 4no. 4 sq mm. copper conductor submain complete in all respect. (S.I. No. 266 C)
6Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (S.I. No. 716)
7Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape, and making connections etc. complete in all respects as per direction of the Engineer-in charge. (a) 16 sq. mm Lugs S.I. No. 504 (d)
8Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.SI No.725(A)
9Supply and laying of aluminium conductor PVC insulated armored served sheathed cables 1100 Volts grade at depth of 750 mm below ground level over a cushion of 75mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-In-charge, complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 sq. mm 4 core (S.I. No. 20a.1.9)
10Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. SI No.725(B)
11S/L of G.I. Pipe 65 mm B Class. (Civil DSR). (Civil 18.12.7)
12S/F of G.I. Pipe 100 mm dia B Class. (DSR E/M 2022 14.13.3) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58381723
AUTHORITY Government Departments
TENDER VALUE Ref. Documents
LAST DATE 26-11-2026
Authority
Authority Name Rajya Krishi Utpadan Mandi Parishad
Work Description Tender for Supply, Installation, Testing and Commissioning Of 01 Nos. 16 Mtr. Highmast Lighting System With 200W Led Flood Light Etc. Works At S.M.Y. Tarkulwa (Deoria)
Basic Detail
Tender No 2026/Electrical/TARKULWA/01
Bidding Type Tender
Location
City Gorakhpur
State Uttar Pradesh
Key Dates
Publish Date 05 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 1000
EMD 43000
Exemption Not Available
Document List
9da8f6e3-816c-4cfc-9930-86f63ecb3937.html
BOQ_2283562.xls
T1Tarkulwa.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

9da8f6e3-816c-4cfc-9930-86f63ecb3937.html

xls

BOQ_2283562.xls

pdf

T1Tarkulwa.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender