Tender For Special Repairs To Building No. P-398 Provn Of One Sentry Post Near Bldg No. P-04 At Various Locations At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
3 days left
EMD
74000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Building No. P-398 Provn Of One Sentry Post Near Bldg No. P-04 At Various Locations At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / loose soil complete all as specified and directed. |
| 2 | Excavation in trenches ,n exc 1.5m wide and n exc 1.5mtr in depth for foundation etc or for shafts ,well cesspts ,manholes etc n exc 10sqm on plan and n exc 1.5mtr in depth and getting out in soft / disintegrated rock complete all as specified and directed. |
| 3 | Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed. |
| 4 | Returning, filling in, earth including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and as directed. |
| 5 | Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified and as directed. |
| 6 | M & L for Plain Cement Concrete type D2, 1 : 4 : 8 (40 mm graded aggregate) as in foundation filling and mass concrete for embedding of posts etc complete all as specified and directed. |
| 7 | M&L for PCC 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in subbase of floors etc, complete all as specified and directed. |
| 8 | M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed. |
| 9 | M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed. |
| 10 | M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed. |
| 11 | M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed. |
| 12 | M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc ruogh finished surfaces of concrete flat complete all as specified and as directed. |
| 13 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide complete all as specified and as directed. |
| 14 | M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for rough finished surface of concrete complete all as specified and as directed. |
| 15 | M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete complete all as specified and as directed. |
| 16 | M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified. |
| 17 | Description same as above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders complete all as specified and as directed. |
| 18 | M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface complete all as specified and as directed. |
| 19 | Providing cement concrete 25 mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to flooring complete all as specified and as directed. |
| 20 | S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 80 mm thickness ,M-40 Grade ,with grey cement & pigment over sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed. |
| 21 | M&L 15 mm thick cement plaster in CM1:4 in two coats, (10 mm thick rendering coat in CM 1:4, 5mm thick second coat mixed with water proofing compound as per manufacturer instruction) on fair faces of brickwork/concrete work finished even & smooth without using extra cement.Note ;- WPC will be measured and paid seperately under respective item. |
| 22 | M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed. |
| 23 | M&L for three coats of white wash on ceiling/Chhajja (undecorated) surfaces incl preparing of surfaces complete all as specified and directed. |
| 24 | M & L preparation of wall plaster or un plastered new surfaces and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed. |
| 25 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed. |
| 26 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed. |
| 27 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement complete all as specified and as directed. |
| 28 | S&F standard aluminium section powder coated any colour as approved for window /Door frames/three track shutters sliding/ Fixed type partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed. |
| 29 | S&F mild steel barrel tower bolt stove enameled black 200 mm size with bright bolt complete all as specified and directed. |
| 30 | S&F mild steel pressed handle oval type 150 mm size, stove enameled black complete all as specified and as directed. |
| 31 | Supply & Fix 300mm long Mild steel sliding door bolt , plate type stove enamelled black with bright not less than 16mm dia with and including minimum of 6 bolts and nuts four on plate and two on staples plat and fixed complete all as specified and directed. |
| 32 | M&L for Granite (of any type of coloured) work (table rubbed and polished) 20mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed. |
| 33 | Material & Labour for precast cement concrete Block Masonary with soilid blocks type C1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 34 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 35 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed. |
| 36 | S&F MS angle iron framed work as in doors or gate of angle or other section conforming to Fe 290 (Gde E-165) with gusset plates rails braces etc complete including hangin galso fastenin gand fxing complete as specified and directed . |
| 37 | S&F 30 mm thick Flush shutter ,solid core construction ,with block board core and plywood face panel comercial type on boath sides complete all as specified and as directed . |
| 38 | M&L for 1.5mm thick Decorative laminate type 1 of surface finish, any colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed. |
| 39 | S&F in repair Stainless steel Door hinges heavy weight, cold rolled 100 mm size all as specified and directed. |
| 40 | S&F in repairs 200mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed. |
| 41 | S&F Brass mortice lock verticle type 100mm size 4 lever with handle both side handle completed all as specified and as directed. |
| 42 | S&F 150mm long floor door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 43 | S&F standard aluminium section powder coated any colour as approved for window and ventilator three track sliding shutter /fixed type without sash bar ,aluminium section weight 0.55 kg /m including necessary joining cleats ,glazing clips ,rubber packing ,anodised aluminium snap beading , screws etc complete all as specified and as directed. |
| 44 | Supply and Fixing sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 45 | Supply and Fixing Figured glass pin head type (Figured glass) sheet glass 4mm thick ordinary quality and glazing with oil putty or rubber and aluminium beading in squares n. exc 0.5 sqm in each pane complete all as specified and directed. |
| 46 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 47 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 48 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings all as directed. |
| 49 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 50 | M&L for 15 mm thick cement plaster on fair faces of stone masonry surface on wall in CM 1:6 and finishing even and smooth without using extra cement complete all as specified and directed. |
| 51 | M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished fair and even complete all as specified and directed. |
| 52 | M&L for 5 mm thick rendering in CM 1:3 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 53 | Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and as directed. |
| 54 | M&L for distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work complete all as specified and as directed. |
| 55 | M&L for complete removal of existing treatment by scrapping with machanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Girt having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc by skilled labour complete all as specified and as directed. |
| 56 | M&L for one coat of acrylic water based exterior grade primer @ 0.9 ltr (undiluted)/10 Sqm diluted with water 1:1 ratio to be applied with fully automatic airles spray machine of paint application with a flow speed of min 1ltr per minute having pressure of 3300 PSI allow 6-8hrs to dry the surface for painting of subsequent coats complete all as specified and directed. |
| 57 | M&L for two coat based premium acrylic smooth exterior emulsion of approved colour with silicon additive and color stay Technical, Excellent Dirt Pick up resistance with low VOC less the 50 gram/10 Sqm diluted with water as per manufecturer instructions applied over priming coat with fully automatic airles spray machine of paint application with a flow speed of min 1ltr per minute having pressure of 3300 PSI allow 6-8hrs to dry the surface for painting of subsequent coats complete all as specified and directed.Note :-(a) The work pertaining to periodical services & water proofing shall be executed from authorised applicator through manufacturer of which the material i.e Paint, Distemper ,Cement Base paint, Putty etc. is proposed to be used by the contractor and approved by Garrision Engineer. |
| 58 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 59 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 60 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 61 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 62 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed. |
| 63 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed. |
| 64 | M & L galzed ceramic coloured tiles area exc 0.11 Sqm but n.exc 0.18 Sqm on walls etc set & jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces over &.incl 10mm thick rendering in cement mortar 1:4 for laying wall tiles etc complete all as specified and directed. |
| 65 | M&L for glazed ceremic tiles in vertical surface of size 600X300X7/8 mm on vertical Surfaces of wall on 10mm cement mortar 1:3 set and jointed in net cement slurry and pointed in white or colour cement to match complete all as specified. |
| 66 | M & L, glazed coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc exceeding 0.18 sqm but not exceeding 0.38 sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 67 | M&L for Virified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6. complete all as specified and directed. |
| 68 | Providing cement concrete 25 mm thick type B-1 (1:2:4) using 20 mm graded agg as in sub base to flooring complete all as specified and as directed. |
| 69 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 70 | M&L for 50 mm thick PCC 1:3:6 type C-2 (using 40 mm graded Stone aggregate) as in floor, plinth protection etc finisheed even and smooth without using extra cement complete all as specified and as directed. |
| 71 | M&L for chequered cement concrete tiles 20cmx20cmx25mm thick set ,jointed and with grey cement and no pigment ,pointed in neat cement slurry in floors over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 72 | M&L for Machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed. |
| 73 | Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. complete all as specified and as directed. |
| 74 | M&L for machine cut kota stone slab in flooring18-20 mm thick and including 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and finshed polishing in complete all as specified. |
| 75 | M&L for Pre polished machine cut kota stone slab, 18-20 mm thick in riser and tread single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and finshed polishing complete all as specified and directed. |
| 76 | M&L for 20 mm thick Granite (of any type of coloured) tiles maxhine cut in skirting/dado laid over cement screed and jointed with grey cement slurry ,and pointed with grey cement slurry ,and pointed with white cement with adimixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed. |
| 77 | M&l for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete 20mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete all as specified and as directed. |
| 78 | M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed. |
| 79 | S&F in repairs 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including connections incl 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball complete all as specified and as directed. |
| 80 | Dismantling of water tank & n exc 500 ltr capacity in litres and removing to store complete all as specified and as directed. |
| 81 | Supply & Fix 500 litre capacity three layered rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position complete all as specified and directed. |
| 82 | S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. |
| 83 | S&F in repairs Stop valves /Angle cock/ concealed stop valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed. |
| 84 | S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and as directed. |
| 85 | S&F in repairs Wall mixer (3-in 1) with arrangement for both telephonic hand shower and overhead shower with bend as per CERA CAT Part No: F1020403 or equivelent of Jaquar, Parryware, Johnson Pedder complete all as specified and directed by Engr-in-Charge |
| 86 | S&F in repairs snow white vitreous china EWC single peice type 660X370X700 mm incl seat cover and flush fittings complete fixed in floor with brass screw complete Make : CERA CAT Part No: S1013248 or equivelent of Jaquar, Parryware,Johnson Pedder complete all as specified and directed by Engr-in-Charge |
| 87 | S&F in repairs snow white vitreous china wall hung WC of size 655 x 365 x 755 mm mm incl seat cover and flush fittings complete fixed in wall with brass screw complete Make : CERA CAT Part No: S1031103 P or equivelent of Jaquar, Parryware,Johnson Pedder complete all as specified and directed by Engr-in-Charge |
| 88 | S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and as directed. |
| 89 | S&F C P Hand shower (health faucet) 1.25 mtr PVC tube with wall hook complete for EWC, all as specified and directed. |
| 90 | S&F in repair 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 91 | supply and fixing Gun-metal gate valves 25mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 92 | S&F in repair wash hand basin vitreous china white, counter top basin of size 495x365x140mm including making good the surface/joints with white cement complete all as directed by Enge-in-Charge. Make : CERA CAT Part No: S2020186 or equivalent in Jaquar, Hindware |
| 93 | S&F in repair 15mm bore chromium plated single lever basin mixer as per cat part No F1021451 of CERA or equivalent in Kohler, JAQUAR) complete all as specified and directed by Engr-in-Charge |
| 94 | S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 95 | S&F 5.5mm thick glass shelf of size 600mm long fancy type fixed and including Chromium plated grils, screws and wooden /plastic cleats complete all as specified and directed. |
| 96 | S&F 5.5mm thick glass corner shelf assembly fancy type size 250mmx250mmfixed with and including chromium plates brass screws and wooden /plastic cleats complete all as specified and directed. |
| 97 | S & F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 98 | M&L in repairs for 12.5 mm thick tapered edge gypsum plain board ceiling conforming to IS: 2095- Part I at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer |
| 99 | S & F 900mmx600mm Triple LED Mirror – Contemporary Anti-Fog Mirror with Bright Dimmable Lighting, Touch Sensor Controls: Effortlessly turn the mirror on/off and adjust brightness with a simple touch, Perfect for mounting in bathrooms, bedrooms, or vanity spaces for a contemporary touch, High-quality materials and energy-efficient LED of any shape all as specified and directed. |
| 100 | S & F Brass chromium plated shower rose 125mm size incl shower arm complete all as specified and directed. |
| 101 | S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 102 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 103 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 104 | S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed. |
| 105 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 106 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 107 | S &F PVC (SWR) 75 mm dia vent cowl complete all as specified and as directed. |
| 108 | S &F PVC (SWR) 110 mm dia vent cowl complete all as specified and as directed. |
| 109 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 15mm x 460mm bowl size 410mm x 330mm x160m complete all as specified and as directed |
| 110 | S&F, in repairs, 25mm dia, powder coated, fancy type, aluminium decorative tubular curtain rod with decorative ball type side brackets, complete all as specified and directed. |
| 111 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like including demolition of existing RCC work in any position complete all as specified and as directed. |
| 112 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 113 | M&L for TMT bar 6 to 8 mm dia including cutting bending and binding with MS wire anealed dia not less than 0.9 mm conplete all as specified and as directed. |
| 114 | M&L in repairs for 18/19mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed |
| 115 | S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed. |
| 116 | Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and as directed. |
| 117 | S&F 100 mm size extruded brass handles, fabricated type, polished complete all as specified and as directed. |
| 118 | Taking up or down steel tubing 15 mm bore and connection and removing to store complete all as specified and directed. |
| 119 | Taking up or down steel tubing 20 mm bore and connection and removing to store complete all as specified and directed. |
| 120 | S&F 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed |
| 121 | S&F 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors incl cutting chases where required complete complete all as specified and directed. |
| 122 | S&F in repairs kitchen plate rack of stainless steel S 304 of size 1200mm x 950mm x 230mm made out of 1mm thick steel sheet complete all as specified and directed. |
| 123 | Demolition of RCC (reinforced , cut as required to facilitate demolition) of any description and in any position not otherwise specifically provide for as in manhole cover complete all as specified and as directed. |
| 124 | M&L for providing precast cement concrete type C1, 1:2:4 (20mm graded aggregate) in landings, cover slabs(for manholes etc) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and as directed. |
| 125 | M&L cutting out cracks to V-section in existing roof slab or terrace, cleaning out, wetting, grouting, with cement sand slurry in 1:3 with mixing of WPC @ 2% by wt of cement complete all as specified and as directed. |
| 126 | Removal of existing roof treatment incl under layers of cement screed any thickness incl tiles and taking down debries from roof to ground by machanical means to avoid any damange to structure and sorrounding and dispose off the debries at a distance of 500 mtr where directed. |
| 127 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5 mm graded aggregate) for roof padding finishing cement concrete surface even and smooth with out using extra cement complete all as specified and as directed. |
| 128 | M&L for Providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application after cleaning the surface completely to eliminate all sharp portion over 10 mm thick screed bed in CM (1:4) mixed with WPC @ 3% of weight of cement or as per manufacturers instructions, including removing old APP membrane, and applying a coat of aluminium paint complete all as specified. |
| 129 | M&L for second class hard wood plain fillets square, rectangular or triangular in section clean swan, secured with nail or beads area exc 13 & n.exc 25sqcm after taking down the old fillets complete all as specified and as directed. |
| 130 | M&L in repairs for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed. |
| 131 | Dismantling wrought iron or mild steel work of any description not otherwise proviceded for complete all as specified and as directed. |
| 132 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 133 | S&F in repairs 10 mm thick coloured polycarbonate multiwell sheet manufactured from high quality, UV stabilzed resins in roof covering incl necessary fittings & fixtures like aluminium strips, aluminium tee, coach screw and washers etc with silicon joints filler for fixing complete of any colour all as specified and directed by engineer in charge |
| 134 | S&F 12mm thick frosted/plain/tinted tuffened glass partition including door with necessary frame work complete fitting and fixtures such SS handle etc complete all as specified and directed incl taking down the existing door complete all as specified and as directed. |
| 135 | M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.Note :- (New reinforcement or Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok |
| 136 | Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, ceiling roses, pendants/batten holder, regulators etc. all as specified and directed by Engr-in-charge. |
| 137 | Taking down existing unserviceable MCB DB SPN / TPN along with MCBs complete by disconnecting all as directed. |
| 138 | Taking down existing unserviceable light fitting any size complete all as specified and as directed. |
| 139 | Taking down existing unserviceable sub main wiring 2.5/4 Sqmm aluminium/copper cable all as directed. |
| 140 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit M/G ISI, Concealed in brick or stone wall using FRLSH PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (i) wiring shall be done by using proper colour coding. |
| 141 | (a) One light point controlled by one way 5 Amps switch |
| 142 | (b) One ceiling fan/exhaust fan point controlled by one, one way 5 Amps switch |
| 143 | (c) One 3 pin socket outlet 5 Amps on independent board |
| 144 | (d) One 3 pin socket outlet 5 Amps on same board |
| 145 | (e) One Bell point controled by one bell push on same board with other switches or on independent board. |
| 146 | All as per srl item No. 140 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 147 | All as per srl item No. 140 here-in-before but for 6/16 Amp independent socket outlet using 4 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 148 | S&F modular switch piano, flush type 6 Amps one way 230 volts complete all as specified. |
| 149 | S&F modular socket 3 pin 6 Amps flush type 230 volts complete all as specified. |
| 150 | S&F modular switch one way 16 Amps flush type 230 volts complete all as specified. |
| 151 | S&F modular socket outlet 3 pin, 2 in 1, 6 & 16 Amps flush type 230 volts complete all as specified. |
| 152 | Supply and Fixing 15/16 Amps three pin socket modular complete. |
| 153 | Supply and Fixing bell push 5 Amp modular switch complete. |
| 154 | S&F modular ceiling rose 3 terminal size 50x65mm surface type 230 volts complete all as specified. |
| 155 | S&F, modular fan step type regulator, suitable for 1200mm sweep ceiling fan, 2 module complete all as specified and directed. |
| 156 | M&L bell electrical ding dong 5 Amp 230 volt. |
| 157 | M&L for Sub main wiring with two single core FRLSH wiring of 6.0 Sq mm 03 runs (for Phase & Neutal) single core, PVC insulated, unsheathed FRLSH cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated, 6 Sqmm FRLSH copper conductor for earth continuity all as specified and as directed. |
| 158 | Disconnection and removing the u/s light fitting and S&F LED Batten box type made of CRCA sheet including 1X20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified. |
| 159 | S&F in repir LED Mirror light fitting complete made out of CRCA Sheet including 1x10watt LED rod complete connecting up with three core pvc copper flexible cable of size 23/.0076 from ceiling rose to connector comlete all as specifid and as directed by Engr in charge. |
| 160 | S&F Surface mounted LED bulk head luminaire 1x10 watt, made of aluminium pressure die cast, white finish housing with PMMA diffuser , electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified. |
| 161 | Disconnection and removing the u/s light fitting and S&F in replacement wall mounted fancy bracket designed decorative glass type LED light with holder B22 new generation, aesthetically designed, ultra modern luminaire with warm white 10Watts LED bulb complete all as specified and directed by Engr-in-charge. |
| 162 | Disconnection and removing the u/s light fitting and S&F in replacement wall mounted decorative type 5/10 watts LED scenerio spot light environmental friendly, new generation, aesthetically designed, ultra modern luminaire with high brightness SMD LEDs as light source complete all as specified and directed by Engr-in-charge. |
| 163 | S&F batten holder bakelite complete all as specified (ISI Marked) complete all as specified and as directed. |
| 164 | Disconnection and removing the u/s LED lamp and S&F LED lamp 9/15 watts complete all as spfd and directed. |
| 165 | S& F in Post top decorative globe type lantern LED 30 Watt (neutral white) with high efficient LED and polycarbonate diffuser, sutable MS/die cast alumn spigot mounting assebly, glare free conforming to IP 65 ptrotection with and incl necessary fixing arrangement complete all as specified including taking down old unserviceable fittings of any size/ wattage complete and as directed by Engineer -In-Chrge |
| 166 | Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm to 450mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete all as specified and as directed. |
| 167 | Disconnection & taking down the unserviceable Ext fan and S&F Exhaust fan, MS body AC single Phase 230V of size 300mm sweep heavy duty with blade and frame and louvers including connection with 0.5sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 168 | Disconnection & taking down the unserviceable Ext fan and S&F Exhaust fan, PVC body AC single Phase 230V of size 200mm sweep heavy duty with blade and frame and louvers including connection with 0.5sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 169 | Supply, installation, testing and commissioning of Heavy duty wall mounting fan Metal boday of sweep 450mm complete with copper wound motor suitable for operation on 230 volts single phase 50HZ AC supply, including oscillating arrangement three speed control, metal blades, safety guard, wall mounting bracket down rod as per site required with connection suitable size of PVC Insulation copper conductor cable from ceiling making good surface and testing complete all as specified and directed. |
| 170 | Disconnection and removing U/S Ceiling fan deposit to MES E/M store and S&F ceiling fans 1200mm sweep energy efficient Five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and as directed. |
| 171 | Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed. |
| 172 | Supply and fixing double door 4 way, 415 volts, Vertical TPN MCB Distribution board factory made powder coated with suitable size of copper wire and provision for earthing neutral and earth link, including 3 pole MCCB 100Amp rating, 25KA breaking capacity for incoming supply and MCB SP for outgoing supply with concealed in all after cutting the wall and mending good the damages to original finish incl, Inter connection all as specified and directed. Note : DB, MCCB and MCBs are of the same make. |
| 173 | S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge. |
| 174 | S&F MCB DB, SPN, 4 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, vertical, double door type suitable for fixing MCBs including connecting etc. complete all as specified and as directed. |
| 175 | S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 176 | S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 177 | Disconnection & taking down the U/S building street light and S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK06 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. |
| 178 | Disconnection and removing the u/s MCB plug and socket unit and S&F moduler PVC box, 20A Socket and 20Amp moduler MCB SP, 10KA, 240 volt including 20Amp top complete all as specified. |
| 179 | Disconnection and Removing the Cable connection and Copper pipe alongwith all connection items carefully from the existing indoor and out door units and Pump down the refrigerant from out door unit of tonnage 1.5 ton including stablizer from the existing position and shifting the AC unit at new place and refixing the out door and indoor units with necessary copper tubing including topping up of gas and connecting stablizer etc for its proper functioning all as direcred and specified by Engineer-in-charge. |
| 180 | Disconnection and removing the Old unserviceable Copper coil Pipe between Indoor & Outdoor Unit and S&F New Copper Pipe coil of 1/2\\" dia and connecting alongwith Insulation Sleeves to the existing position incl leak testing complete all as directed by Engineer in charge. |
| 181 | All as per Item No 175 here in above but of capacity 1/4\\" dia complete all as specified and as directed. |
| 182 | Disconnection and Removing the damaged Flexible PVC Drain Pipe of dia 25mm and S&F New Standard Flexible PVC Drain Pipe of dia 25mm for capacity 1.5 ton, 2.0 ton Capacity complete all as specified and as directed. |
| 183 | S&F Earth continuity GI wire of size 4mm fixed to wall/ batten or buried in ground or drawn in conduit/pipe complete all as specified and as directed. |
| 184 | Supply and laying GI tubing light grade in tranches for protection of cable for 50 mm dia in cluding taking out. old pipe complete all as diercted by Engr -in-charge. |
| 185 | Dismantling the earth chamber, Excavation and removing the u/s earthing materials along with u/s and M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 2.25 mtr below normal ground level, connected to GI wire 4cmm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, GI protection pipe of size 20 mm dia upto 7.5 mtr length , funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed. |
| 186 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35Sq mm 4 Core complete all as specified and as directed. |
| 187 | Excavation in treches not exc 1.5m in width and 1.5 M in depth for foundation of pole, laying of cables etc in Hard and dense soil and getting out complete all as specified and as directed. |
| 188 | Returning, filling in including spreading levelling, watering, and well ramming in layers not exc. 25 cm in soft/loose soil complete all as specified and as directed. |
| 189 | Removing excavated materials not exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and as directed. |
| 190 | M&L for sand filling using approved clean dry sand for cushioning of ug cables incl spreading levelling and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 191 | M/L for sub class 'B'old size burnt bricks of class designation 100, for cable protection laid length wise perpendiculer to the axis of the cable complete all as specified . |
| 192 | M&L for cutting or road for laying of LT cable and making good to match with the existing using extra cement etc. complete all as specified and as directed. |
| 193 | Supply Jointing & laying of Steel tubing medium grade galvanised of size 25mm dia laid in trench or fixed to wall complete all as specified & directed. |
| 194 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 2 core. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender