Tender For Addition/Alteration Bldg No P-239, 02X Toilet Blocks And Verandah Flooring At Bldg No P-82/01 And Provn Of Mosquito Proof Glazed Joinery At Mil Stn Sgnr
Tender Value
Ref. Documents
Estimated cost
Bid Submission
25 Nov 2026
13 days left
EMD
58132
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration Bldg No P-239, 02X Toilet Blocks And Verandah Flooring At Bldg No P-82/01 And Provn Of Mosquito Proof Glazed Joinery At Mil Stn Sgnr
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling for floor hearth or wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all specified and directed. |
| 2 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:6 complete all specified and directed. |
| 3 | M&L for 450x300x7/ 300x600x7 mm mm thick glazed ceramic coloured tiles as in vertical sufaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 10mm backing coat in CM 1:4 complete all specified and directed. |
| 4 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed. |
| 5 | M & L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed bed in CM 1:6 in floors etc. Jonited in neat cement slurry and painted in white cement or coloured cement to match the shade of tiles complete all specified and directed. |
| 6 | M & L for double charged vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.0 sqm, in dado over and including rendering in 10mm thick CM 1:3 etc. Jonited in neat cement slurry and pointed in white cement or coloured cement to match the shade of tiles complete all specified and directed. |
| 7 | Demolition of brick work built in cement mortar of any description complete all specified and directed. |
| 8 | M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all specified and directed. |
| 9 | Taking down cement or cement lime plaster on brick or stone walls/cement plaster including raking out joint, hacking for key & scrubbing down with water etc complete all specified and directed. |
| 10 | M&L for 15mm thick rendering in CM 1:6 on fair faces of brick or concrete wall surfaces finished even and smooth without using extra cement complete all specified and directed. |
| 11 | M&L for 5mm thick rendering in CM 1:3 on fair faces of concrete surfaces as in ceilings finished even and smooth without using extra cement complete all specified and directed. |
| 12 | M&L for complete removal of existing treatment and applying acrylic wall putty in internal/external walls / RCC surfaces / soffits of chajjas / roof projections / cantilevers / balcony / ceilings etc (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving interior/exterior painting complete all as specified and directed.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further external finishes. Please note that the further external finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. |
| 13 | M&L for applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion and primer brands complete all specified and directed. |
| 14 | Taking down steel window/ventilators/doors chowkats or frames (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all specified and directed. |
| 15 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all specified and directed. |
| 16 | S&F factory made uPVC white colour casement (Openable) window/ventilator of area not exceeding 1.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) complete all specified and directed. |
| 17 | S & F 5.5mm thick sheet glass(tinted),selected quality and glazing with necessory arrangement in square exc 0.5 sq. m in each pane complete all specified and directed. |
| 18 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 850 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all specified and directed.Note: (i) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made (ii) Cost for M.S. hold fast/ lugs or SS dash fasteners shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 19 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in-Charge including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges of size 100mm - 4 nos. per leaf (Table 6 of BIS 12817-2020) BIS marked.(b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf as per table 1, dia of bolt 12mm as per BIS 15833. (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf(d) Stainless Steel (304 Grade) Finished Sliding door Bolt 300 mm - 1 no. per leaf, 16mm dia as per BIS marked clause 3(iii) of BIS 15834-2020.(e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leafNote for WPC/uPVC Frame/window/shutter :- (a) Test certificate of Manufacturer to be provided by contractor. (b) Embossing with Barcode of Manufacturer engraved over each door Frame & shutter is mandatory. |
| 20 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, jointed with solvent fixed to wall or laid in trenches with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 including clamps and bends/Tee/elbow/ branch piece complete all specified and directed. |
| 21 | S&F 110 mm bore PVC (SWR) bends any radius complete all specified and directed. |
| 22 | S&F 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all specified and directed. |
| 23 | S&F 110mm bore PVC (SWR)branch piece, double (double Y) equal or unequal complete all specified and directed. |
| 24 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all specified and directed. |
| 25 | S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal complete all specified and directed. |
| 26 | S&F 110mm bore PVC (SWR) couplers complete all specified and directed. |
| 27 | S&F 110mm bore PVC (SWR) reducers complete all specified and directed. |
| 28 | S&F 110mm bore PVC (SWR) vent cowl complete all specified and directed. |
| 29 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, jointed with solvent fixed to wall or laid in trenches with matching PVC SWR rings including cutting holes and making good the disturbed portion with PCC (1:2:4) type B0 including clamps and bends complete all specified and directed. |
| 30 | S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all specified and directed. |
| 31 | S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal complete all specified and directed. |
| 32 | S&F 75 mm bore PVC (SWR) junction double, (double T), equal or unequal complete all specified and directed. |
| 33 | S&F 75 mm bore PVC (SWR) couplers complete all specified and directed. |
| 34 | S&F 75 mm bore PVC (SWR) reducers complete all specified and directed. |
| 35 | S&F 75 mm bore PVC (SWR) vent cowl complete all specified and directed. |
| 36 | Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ceiling complete all specified and directed. |
| 37 | Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/centrings complete all specified and directed. |
| 38 | Supplying and laying of CPVC pipes of dia 20 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all specified and directed. |
| 39 | Supplying and laying of CPVC pipes of dia 25 mm SDR 11 & Plain CPVC SDR 11 inlcuding all fittings i.e.Brass elbow, Brass Tee, Male threaded Brass adaptor, Female threaded brass adaptor, unions ball valves, flange and tank adaptor etc) concealed including cutting chases to brick wall/ceiling or laying in floors/trenches and making good complete all specified and directed. |
| 40 | Dismantling water tanks any type exc. 500 ltr but not exc 1000 ltr complete all specified and directed. |
| 41 | S&F rotational moulded polythylene water storage tank 1000 Ltrs (Three Layer) (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part -I capacity complete all specified and directed. |
| 42 | S&F 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20 mm - 210 gms / 25mm-455gms/ 40mm - 690 gms) complete all specified and directed. |
| 43 | S&F in repair, vitreous china squatting pan \\"ORISSA\\" pattern white, of size 580x440mm with integral foot rest, CI 'P' trap etc complete all specified and directed. |
| 44 | S&F in repair vitreous China wash down water closet pan (pedestal pattern), white complete, including white seat cover with hinging arrangement, (excluding fixing bolts, flushing cistern and flush pipe complete all specified and directed. |
| 45 | S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all specified and directed. |
| 46 | S&F in repair PVC low level dual type flushing cistern 10 liter capacity, valveless, syphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density, PVC connection 15 mm dia and 450mm long & bracket etc complete all specified and directed. |
| 47 | S&F in repair for vitreous China urinals,full stall urinal (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. inclusive of fixing supply pipe to flushing cistern, trap and waste pipe) and including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all specified and directed. |
| 48 | S&F in repairs vitreous china wash hand basin counter shank with green/black granite slab to be cut and polished at site as per requirement, brackets, 32mm bore brass chromium plated waste coupling & 32mm bore low density polythelene (LDPE) flush pipe of pressure 6Kgf/Sqcm (1.00M long,) including 15mm bore 450/600mm length PVC connection with PTMT nuts and fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. (Note : Granite shall be measured and paid seperately) |
| 49 | S&F in repair soap dish, vitreous china white complete all specified and directed. |
| 50 | S&F in repairs 600x450 mm bevelled edge mirror of selected qualite glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all specified and directed. |
| 51 | S&F 15mm bore PVC connections, with PTMT nuts, of length 450/600mm complete all specified and directed. |
| 52 | S&F in repairs chromium plated angle stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all specified and directed. |
| 53 | S&F in repairs chromium plated stop valves, cast copper alloy 15 mm bore screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete all specified and directed. |
| 54 | S&F in repair 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all specified and directed. |
| 55 | S&F in repair 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all specified and directed. |
| 56 | S&F in repairs 15mm bib taps cast copper alloy, chromium plated fancy type with crutch or butterfly handle screwed down screwed for Iron pipe or for brass ferrule and fixed complete all specified and directed. |
| 57 | S&F Single lever Basin Mixer without Popup waste with 450 long Braided Hoses with long screwed for iron pipe of 15 mm dia, complete all specified and directed. |
| 58 | S&F Grating doom 100mm dia of CP (Minimum weight 25gms) complete all specified and directed. |
| 59 | M&L for PCC (1:5:10) type E-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete or filling in sunken floor complete all specified and directed. |
| 60 | M&L for Water proofing treatment to RCC sunken slab (not exceeding 45cm depth of sunken) as specified below complete all as specified and directed.(a) Applying 15 mm plaster in CM 1:3 with WPC on raised verticle surface (b) Cleaning the surface with wire brush/coir brush, removing lose material like dust particles, dirt etc. (c) Creating fillet coving of 50x50 mm with polymer modified mortar on the junction of slab and walls (d) Apply first coat of two component modified polymer coating on the horizontal and verticle surface (e) Provision of glass fiber mesh of 2 x 2 mm immediately on above coating (f) Apply second coat of two component modified polymer coating after 72 hrs (g) Cement concrete 1:4:8 over the coating as per requirment (h) Joining the saintary pipes with the water proofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and saintary pipe with non shrink cementatious grout complete all as specified and directed. (i) PCC filling in sunken portion will be measured seperately. Note : Complete treatment/work to be executed by the approved applicator.Warranty to be given by the applicator firm of 5 years in writing. |
| 61 | M&L 75 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete/sub base complete all specified and directed. |
| 62 | M &L for for providing Modular Kitchen Cabinet/cup board with shutters in required sizes & shape at site made out of HDHMR Board , 18/19mm thick, density over 850kg/cum, having a class A fire rating, grade 2 quality, commercial type, fixed with screws to timber frame work as in Kitchen cup board Shutter / shelves / cabinet etc consisting of both side 0.90 mm laminate one side decorative & other side Plain(white).The panels shall be fabricated using adhesive and screws where ever required .All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per manufacturer instructions and as complete all specified directed. |
| 63 | S&F Cup Saucers fabricated with stainless steel section (SS-304), best quality of size 420 mm x 500 mm x 200mm for different use such as placing plain plate /cutlery etc fixed in position complete all specified directed. |
| 64 | S&F Cutlery set & Dustbin fabricated with stainless steel section (SS-304), best quality of size 420 mm x 500 mm x 150 mm for different use such as placing cup & saucer etc fixed in position complete all specified directed. |
| 65 | S & F Stainless steel fancy type 200 mm handle complete all specified directed. |
| 66 | S & F Telescopic Ball bearing Channel chromium plated of size 500 mm (when closed) fix to kitchen basket complete all specified directed. |
| 67 | S& F Auto Closing Concealed Hinges for Half Overlay Doors with 95 Degree Opening Angle complete all specified directed. |
| 68 | S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all specified directed. |
| 69 | S&F continuous (piano) hinges 30mm width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws. |
| 70 | M&L for 20mm thick Rajasthan black granite (Telephonic Z-black) , machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified and as directed. Note : Single piece should be used in steps/cills/jambs/shelves. |
| 71 | M&L for brick work in half brick thick walls with sub class 'B' Bricks, built in CM 1:4 complete all specified and directed. |
| 72 | M&L preparation of newly plastered surface wall and applying two coats of distemper oil emulsion of any tint over a coat of primer complete all specified and directed. |
| 73 | Providing edge moulding to 18-20mm thick stone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all specified and directed. |
| 74 | M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all specified and directed. |
| 75 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all specified and directed. |
| 76 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed complete all specified and directed. |
| 77 | M&L for 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Rate of Fillets / metal frame work and G.I. wire mesh are included in this item) complete all specified and directed. |
| 78 | M&L for double charged, vitrified, stain & scratch resistant, joint free, premium quality coloured tiles 1200 X 600 mm and 7-8 mm thick in any pattern of light & dark tiles as approved,on vertical surfaces such as in skirting/dado etc ,length of each unit not less than 1200 mm , set and jointed adhesive of Sika (Ceram Grey) @ 5 Kg/sq.m over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all specified and directed. |
| 79 | M&L for Reinforced cement concrete type B1 1:2:4 (20 mm graged aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match complete all specified directed. |
| 80 | M&L for TMT bars 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all specified directed. |
| 81 | Use and waste of form work to rough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick complete all specified directed. |
| 82 | M & L for 12 mm thick Toughned glass frosted sliding/openable door for opening of 2 sqm to 4 sqm including all necessary door SS fitting including SS Handles and frame for sliding complete all specified and directed. |
| 83 | S& F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all specified and directed. |
| 84 | M&L for Preparation and applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using spray gun to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion and primer brands complete all specified and directed. |
| 85 | S&F stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer complete all specified and directed. |
| 86 | S&F factory made white Coloured UPVC casement openable door made with integrated fixed panel, fabricated from multi chambered UPVC profiles (Frame :- 67x62 mm, sash : 67x 115mm, T- Profile : 78.4 x 67 mm), 2.3 mm wall thickness + 0.2 mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to UPVC profile), EPDM gaskets, Zinc alloyed white powder coated hardware (casement handle, 3D hinges, multipoint lock, striker plates and provision for 5 mm toughened glass in shutter and 18 mm prelaminated UPVC board in fixed panels. Frame fixed with 8 mm x 100 anchor fastners all as per design and manufacturer's specifications complete all as specified and directed by Engineer in Charge. Note : Rates of all type of fittings, locking arrangements, handles and all accessories as per manufacturer's instructions are included. |
| 87 | S&F of factory made UPVC sliding window (White Colour) of three track and three panel design including two glazed sliding shutters and one shutter with stainless steel (SS) wire mesh for fly proofing. The system shall include and integrated fixed panel made from pre-laminated UPVC board. UPVC frame fo 122x 54 mm & sash 47 x64 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead of 29.5 mm x 21.8 mm and double glazing bead of 14.5x21.8 mm comprising of UPVC chambered frame, with in built roller track and sash extruded profiles duly reinforced with 1.50+0.2 mm thick galvanised mild steel section made from roll forming process of required length, UPVC extruded interlock, EPDM gasket and provision for 5 mm toughened glass in shutter and 18 mm prelaminated UPVC board in fixed panel. Wool Pile, GI fasterner 100x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size, complete all as specified and directed.Note : Rates of all type of fittings, locking arrangements, handles, wire mesh, and all accessories as per manufacturer's instructions are included. |
| 88 | S&F 5 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed. |
| 89 | Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed. |
| 90 | M & L for concealed conduit point wiring complete for light/ fan on independent /combine board with cable 2.5 sqmm (Nominal area) FRLSH PVC insulated multistranded unsheathed copper conductor, drawn in and including PVC Concealed conduit pipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , after cutting in wall chasing for conduits and sinking's for modular metal flush boxes suitable length and Min 1.6 mm thickness, Min 51 mm depth for mounting, switches, sockets,fan regulator with modular cover plate with frame and making the good disturbed surfaces of wall in CM 1:3 with white wash or existing colour including provision of continuous earth continuity conductor along with point wiring of 1.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switch and connected to common earth dolly, complete all as specified and directed. |
| 91 | All as per Srl item No 90 here in before but for one switch socket combination 5/6 amp on independent board complete all as specified and directed. |
| 92 | All as per Srl item No 90 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed. |
| 93 | All as per Srl item No. 90 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 4 Sqmm complete all as specified and directed. |
| 94 | S & F modular switch 5/6 Amps single pole one way,one module including modular cover plate with frame and metal flush box complete all as specified and directed. |
| 95 | S & F modular socket outlet 5 pin 5/6 Amps flush type complete all as specified and directed. |
| 96 | S & F Modular switch 1 way 16A, with box complete all as specified and directed. |
| 97 | S & F modular Socket, 16A - 2/3 pin combined 2 Module complete all as specified and directed. |
| 98 | S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed. |
| 99 | S & F ceiling rose surface bakelite three terminals complete all as specified and directed. |
| 100 | S & F wave AC Rope 60D strip bright & even illumination with 270 lm/m light output including connectors and connected accessories complete all as specified and directed. |
| 101 | S&F LED down lighter Ultra slim recess-mounting round LED downlighter 6 watt designed with excellent hermally managed aluminium pressure die-cast housing with heat-dissipating fins for larger surface area finished with epoxy powder-coated white to deliver high-efficacy of >110lm/W light output and good uniformity utilisig edge-lit technology complete all as specified and directed. |
| 102 | S&F ceiling fans complete with blades, down rods and accessoreis 230V 1200mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five Star rated with brushless direct current motor (BLDC) old fan to be (deposite) to MES strore complete all as specified and directed. |
| 103 | S&F in repair Sheet metal enclouser for single door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 12 ways 240 volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed. |
| 104 | S & F MCB ‘B’ series type suitable for 240 volts,10 KA, AC supply 6 to 32 Amps , single pole (SP) with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 105 | S & F in repairs MCB ‘C’ series type suitable for 240 volts, AC supply 63 Amps , single pole & neutrtal with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed. |
| 106 | S & F sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in PVC conduit dia 20mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cable as earth continuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and covers including necessary connections, PVC flexible pipes are used in pannel board while connecting the cable complete all as specified and directed.(Note : PVC cable and PVC conduit shall be ISI marked). |
| 107 | M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GI and protection by provision of GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender