Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58381483

Tender For Comprehensive Repair To Otm Accn Under Age B/R-Ii At Mil Stn Yol

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
38 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
10 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Comprehensive Repair To Otm Accn Under Age B/R-Ii At Mil Stn Yol

BOQ

Name of Work:- COMPREHENSIVE REPAIR TO OTM ACCN UNDER AGE B/R-II AT MIL STN YOL
Sl. No. Item Description
1S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing roof sheet of any type. complete all as specified and directed
2Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing roof sheet of any type. complete all as specified and directed
3M&L brick work with fly ash bricks, straight or curved on plan exc 6m redius in CM 1:6 including dismantling of existing brick/stone masonry complete all as specified and as directed.
4Material & Labour for walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed including dismantling of existing brick/stone masonry complete all as specified and as directed.
5Providing and fixing in position false ceiling/Wall Panelling at all heights with GRG ( Glass Fibre Reinforced Gypsum ) having BIS 2095 Part 3 & moisture content less than 2%, humidity resistance of 99% , NRC 0.80 to 0.85 as per IS 8225:1987, Non Combustible as per BS 476 ( Part 4)-1970 and light Reflectance of 90% ( Minimum ), With 10 mm thick Fully perforated Square edge GRG panels/tiles of size 595 x 595 mm factory finished in white with square perforations arranged in a uniform grid pattern, having minimum Square perforation size varying from 5mm x 5mm to 12.2 x 12.2 mm with perforation layout designed to maintain uniform module continuity across panel joints and edge spacing coordinated to maintain uniform perforation module when adjacent panels are installed, backed with factory applied white acoustic fleece and having approximate perforation area of 10–11%, perforation layout and pattern shall be as per manufacturer’s standard design and approved sample. comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG non-combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for paneling as per manufacturer’s specification as Per direction of Engineer-in-Charge all complete. (Note: All the cuttings/making holes for electrical fittings/items are considered in the mentioned rate. Contractor shall quote his rate accordingly) including dismantling of existing false ceiling of any type or size with frame all as specified.
6GI frame work anodised snap grid frame work of size of size 605 mm X 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer's catalogue/ instructions), cutting holes for electrical fittings fixed on and including aluminium tee of size 25mmX25mmX1.50 mm as main runner, aluminium tee of size 25mmX25mmX1.25 mm as cross runner and aluminium angle of size 25mmX25mmX1.25mm at the perimeter suspended from soffit at approx 900 mm centre to centre with hangers 6 mm dia galvanised (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanised iron flat 40 mm X 3 mm size, 60 mm long and expansion hold fasteners 12.5 mm dia, 40 mm long including necessary scaffolding all as specified and directed.
7M&L for 4 mm thick non asbestos fibre cement building boards of size 600x600mm (ED board)as in ceiling fixed or laid/ inserted to timber/ GI/ aluminium frame work fixed with nails, including dismantling of wall/ceiling board of any type with framework complete all as specified and as directed.
8Dismantling timber scantlings in fillets, rails, posts, rafters,purlins, etc. under 40 sq. cm in section, framed or unframed work complete all as specified and directed.
9M & L for second class hard wood in scantling clean sawn fixd in framed complete all as specified and directed including dismantling timber scantling, over 40 Sqcm in section, in any position complete all as specified and directed.
10Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
11S & F for mild steel roof trusses (framed), trussed, purlins and similar works(beam,Tee,, angle, channel or flat section) including distances pieces, cleats etc conforming to FE-290, Grade E-165 complete complete all as specified and directed.
12S & F for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 complete all as specified and directed.
13Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.
14M&L for Cement concrete type B2 1:2:4 using 40mm graded crushed stone aggregate as in foundations, filling and mass concrete all as specified and directed.
15Demolition of cement concrete (unreinforced) of of any descriptions, in ground floors (Floor Topping, Sub Base etc) not exc 150mm thick, above or below ground level complete all as specified and directed.
16Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed
17M & L 25 mm thick PCC 1:2:4 type B0, using 12.5 mm graded crushed stone aggregate as in flooring finished fair and even for fixing of tiles complete all as specified and directed.
18M & L machine cut Kota stone slab flooring 18-20 mm thick ,laid over and including 15mm thick cement screed /rendering in CM 1:6 ,laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, gridding and mirror polshing complete all as specified and directed.
19M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick cement screed and jointed complete all as specified and directed
20M & L Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) light shade, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedding layer of cement mortar in CM 1:6 complete all as specified and directed
21M&L for Virified Ceramic tiles 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in over and including 10mm thick rendering of cement mortar in CM 1:4 neat cement slurry and pointed in white or coloured cement to match.
22Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tileexceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,laid over and including15mm thick cement screed /rendering in CM 1:6 complete all as specified and as directed.
23M & L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm, 450x 300mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in Skirting, Dados, etc., laid over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.
24M&L for 50mm thick cement concrete 1:3:6, type C2 using 20mm graded crushed stone aggregate as in plinth protection and similar works finished even and smooth without using extra cement complete all as specified and directed.
25Material and Labour for waterproofing of exterior walls, include complete removal of existing plaster including raking out joints and applying two coats of acrylic polymer modified high performance coating (Smartcare Ultra Block 2k). The treatment shall be done from ground level and providing 15mm thick cement plaster in CM 1:4 finished even and smooth. Note: The above specification of work for exterior painting is guaranteed as per menufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer. Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\"
26Material and Labour for exterior painting work including complete preperation of newly/Old Plastered Surface plastered surface and crack filling with crack seal upto 3mm where required and making good/smooth the surface with wall putty with silicon additives and sanding these surface for removal of loose particles and applying one coat of SmartCare waterproof primer (Damp Prime Suprema) on walls and chajjas with 10% of dilution of water and applying two coats of 100% acrylic smooth emulsion exterior grade with silicon additives and anti-algal properties (Apex Ultima Suprema). complete all as sepcified and directed.Note: The above specification of work for exterior painting is guaranteed as per manufacturer Performance Warranty and to be executed only by applicator authorised by original equipment manufacturer Make: \\"ASIAN PAINTS/BERGER/NEROLAC\\"
27Taking down cement plaster of any description on brick/stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, remove dust, debries/rubbish etc complete all as specified and as directed.
28M & L for rendering 15mm thick in cement mortar 1:6 on other than fair face of brick work or on concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
29M & L rendering 15mm thick in cement mortar 1:4 on external fair faces of brick work or concrete surfaces plastered surfaces finished even and smooth without using extra cement with water proofing compound as per manufacture instruction complete all as specified and directed.Note: WPC shall be measured and paid separately as supply only.
30Supply only liquid water proofing compound complete all as specified and directed..
31M & L 5mm thick rendering in cement mortar 1:3 on ceiling surfaces, finished surface even and smooth, without using extra cement complete all as specified and as directed.
32Preparation of new/old plastered wall surfaces and applying two coats of oil bound distemper over a coat of 2 mm thick wall care putty including preparation of surface complete, all as specified and as directed by Engr-in-Charge complete all as specified and directed.
33M & L for preparing new surfaces of ceiling and applying three coats of white wash, complete all as specified and as directed.
34M&L for Two coats of cement base paint with mechanical roller on newly plastered surfaces including preparation of surface complete, all as specified and as directed.
35M & L for preparing new surfaces of walls and applying three coats of white wash, complete all as specified and as directed.
36Taking down Chowkats or Frame (without taking off shutter from the frame) exc. 1.50 sqm but n exc 4.00 Sqm each complete all as specified and as directed.
37Taking down Chowkats or Frame (without taking off shutter from the frame) n exc. 1.50 sqm complete all as specified and as directed.
38Taking down shutters of any description but exc. 1 Sqm and n exc. 2 Sqm each complete all as specified and as directed.
39S&F Pressed steel frames size 125 x 60mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
40S&F pressed steel frames size 105x60 mm for doors with one or more rebates including necessary fixing lung, hings, lock strike plate etc. complete all as specified.
41M&L for PCC type C-0 (1:3:6) using 12.5mm graded curshed stone aggregate as in filling in door frame and mass concrete etc complete all as specified.
42S/F 35 mm thick 2nd class hard wood rail and style mm plain framed,factory made panelled shutter (one panel) without interlocking rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and size as per IS:1003 (part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
43S&F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specifeid.
44S/F 35 mm thick 2nd class hard wood glazed and skelton shutter open nrebated and prepared to receive glass gauze etc (without shas bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of numbers of shutter as specified in SSR Pt I Section 8, clause 8.2 (a) complete all as specified and as directed.
45S/F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.
46S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face wth wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed.
47S&F Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x 35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No's for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including 10 mm thick square bar in grill and following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window.(ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf.(iii) MS tower bolt 150mm long - 2 No per leaf(iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf.(v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf.(vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf.(vii) Flat iron fillets of size 20X3 mm for fixing wire gauge.(viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 354/09 sheet 1/3 to 3/3.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.
48Natural colour 15 micron sliding three track anodized aluminium powder coated window with chowkhat of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a)Shutter vertical member, size varying from 40 x 20.0 x 1.00mm (weighing 0.313 Kg/RM) to 50.80 x 25.40 x 1.09 mm (weighing 0.489 Kg/RM).(b)Shutter top & bottom member, size varying from 40 x 20.0 x 1.00mm (weighing 0.313 Kg/RM) to 50.80 x 25.40 x 1.09 mm (weighing 0.489 Kg/RM).(c) Natural colour 15 micron anodized aluminium anodised powder coated frame of chowkhat (including track of suitable size) of section varying from 83.5 x 44.45 x 1.80 mm (weighing 1.302 Kg/RM) to 104 x 44.45 x 1.80 mm (weighing 1.60 Kg/RM), with flat iron hold fasts and necessary concrete to fix hold fasts all as directed.(d) 5.50mm thick tinted glass fixed with alumnium beading, silicon lining and gaskets complete. (e) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos).
49Natural colour 15 micron anodized powder coated aluminium door chowkhat with shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM.b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM.c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM.d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM.e) Anodised aluminium handle, fancy type, 350mm long and aluminium tower bolt of size 150mm.(f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. (g) Aluminium anodised frame of door of section 101.6 x 44.45 x 1.75mm weighing 1.367 Kg/M, with flat iron hold fasts and necessary concrete in PCC M-15, type B-I using 12.5 mm graded crushed stone aggregate to fix hold fasts all as directed.
50S & F Factory made PVC solid door/window/ventilator frame of size 50mmx47mm made out of 5mm prelam sheet in stead of plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tube complete frame fixed with screws/nails /bolts to walls complete all as spd.
51S & F Factory made fully glazed (frosted/ground/obscured)/fully gauged PVC window/ventilator shutter 30mm thick(Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C Channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top and bottom rail on either side and as gap inserted for top and bottom rail complete all as specified and as directed.
52S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads complete all as specified and as directed.
53S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed in repair with stainless steel wire staples or wooden beads complete all as specified and as directed.
54Hacking old broken glass (any thickness, size, quality or description) from wooden Frames/metal frame , glazed with wooden beads complete all as specified and as directed.
55S & F for sheet glass, 4.0mm thick glazing with beads or oil putty with glazing clips, not exc. 0.50 sqm in each pane, complete all as specified and as directed.
56S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in n.exc 0.5 sq.m in each pane all as specified and directed.
57M & L appying two coats synthetic enamel paint over a coat of pink primer on wooden surface any description over 10 cm in width or girth not otherwise described including preparation complete all as specified and as directed.
58Preparation of new steel and iron surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
59S & F 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
60S & F 100 mm long aluminium anodised barrel tower bolt complete all as specified and as directed.
61S & F 150 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
62S & F 100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.
63S & F 100 mm long stainless steel Butt Hinges Medium Weight, Cold Rolled and fixed complete all as specified and as directed.
64S & F 75 mm long stainless steel Butt Hinges Medium Weight, Cold Rolled and fixed complete all as specified and as directed.
65S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
66S & F in repair Vitreous china wash down water closet pan (Pedestal pattern), white fixed in repair with plastic water closet seat, black,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device including PVC valveless,syphonic action type,10 ltr capacity flushing cistern, low level,white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32mm dia for low level cistern complete all as specified and as directed.
67S&F in repair one piece floor mounted toilet water closet of size (WxPxH) 360 x 675 x 750 mm white or tinted S trap 300 mm trendy square design slim UF ezee seat cover wash down system dual flush (6/32 ltrs) mechanism with necessary fixing E145bolts/screws etc complete all as specified, Make Jaguar Cat no OPS-WHT 15853S300UF, Somany, Cera or Equivalent
68S & F in repair Vitreous china squatting pan, Orissa pattern, size 580x440mm white, with integral foot rests including provision of cement concrete bedding and PVC valveless, syphonic action type,10 ltr capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with fixing of flush pipe of polyethyne of low or high density or PVC 32mm dia, for low level cistern complete all as specified and as directed.
69S&F in repair Vitreous china bowl urinal flat back, size 465x355x265mm white (minimum), including grating and union for discharge pipe (excluding flushing cistern) flush pipe and waste pipe, complete including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing 5 ltr automatic flushing cistern with bracket , flush pipe grating and union for discharge pipe complete all as specified and as directed.
70S&F for Urinal with sensor with complete delivery, installation, and commissioning of an automated, touch-free urinal system, specification as follows:-1. The Urinal Bowl (Vitreous China / Ceramic or Stainless Steel)• Material: Typically made from high-grade, glossy white or colored vitreous china (or heavy-duty stainless steel for high-vandalism public spaces).• Type: Available in half-stall, full-stall, wall-hung, or back-inlet/top-inlet configurations.• Dimensions: Common standard commercial sizes range roughly around 310 × 305 × 620 mm up to larger stall designs (485 × 310 × 710 mm), depending on the maker (such as Hindware, Jaquar, or Cera). 2.Accessories Included in S&F:• Wall mounting brackets, heavy-duty brass/expansion screws (typically 60mm long), and anchor plugs.• Water spreader/inlet connection and a 32mm/50mm waste trap, LDPE/PVC discharge pipe, and floor/wall union joints.• Joint pointing sealed cleanly with white cement or silicone around the back-wall fixture.3. The Automatic Sensor & Flushing Mechanism• Sensor Technology: Infrared (IR) or motion-detection sensor that senses the user's presence.• Operation Cycle:• Pre-flush (optional on some models): Short wet flush as the user approaches or stands in range.• Main/Post-flush: Automatically triggers a measured volume of water (usually around 0.4 to 1.0 liters per flush) a few seconds after the user steps away.• Solenoid Valve & Control Box: Connected via a brass or plastic solenoid valve that opens and closes on demand.• Power Source: Can be battery-operated (using AA or AAA alkaline/sealed packs lasting 1–3 years) or AC/DC hardwired (mains power with battery backup).• Face Plate / Housing: Concealed or outwall (surface-mounted) stainless steel or chrome-plated brass/ABS face plate
71S&F in repair counter type (oval shaped) vitreous china wash basin premiun quality of size 610x 385x 130mm including brackets waste coupling & Pipe of 32 mm dia and fixed with including all connected items complete all as specified and as directed.
72S&F in repair counter top vitreous china wash basin premium quality of size 610 x 385 x 130mm including brackets waste coupling & pipe of 32 mm dia and fixed with including all connected items. complete all as specified and as directed.
73S & F in repair Vitreous china wash basin size 550x400mm (flat back or angle back type) including 32mm dia waste fittings, brass chromium plated for glazed ware sinks,basins, etc. with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed with provision of 15mm bore dia pillar taps fancy type chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
74M &L HDPE waste pipe of 32mm dia pressure rating 6 Kgs/Sq cm fixed wash basin, sinks etc complete all as specified and directed.
75S & F in repair bevelled edge looking mirror of selected quality of size 600 x 450x 5.5mm thick , mounted on 6mm thick AC building board or commercial ply and fixed to wooden plugs and CP brass screws and cup washers complete all as specified & directed
76Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified and directed.
77Taking down or up steel 15mm bore water tubing and connections including cleaning for re fixing or removal to store complete all as specified and as directed.
78Taking down or up steel 20mm bore water tubing and connections including cleaning for re fixing or removal to store complete all as specified and as directed.
79M & L 15mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed
80M & L 20mm dia bore steel tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.
81S & F in repair Bib taps cast copper alloy 15mm bore Chromium Plated , screwed down high pressure with crutch or butterfly handle, screwdd both ends for iron pipe or for unions and fixed complete all as specified and as directed.
82S & F in repair Brass CP Shower Rose 125mm size with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed.
83Supply & fixing in repair CP soap dish 150mm size complete all as specified and directed by Engineer-in-Charge
84S&F in repair Sheet glass shelf assembly consisting of 50mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long
85S & F angular stop cock 15mm bore fancy type Chromium Plated with wall flange complete all as specified and directed.
86S&F for Stop valves, cast copper alloy, chromium plated fancy type with long shank and cup(Concealed Type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. ( Consealed stop cock)
87M & L CP health faucet with complete accessories fixed in repair complete all as specified and directed.
88S&F PVC connections 15mm, 450mm long with PTMT nuts washers etc complete all as specified and directed.
89S&F in repair Brass CP mixer (i.e, wall mixer/Center Hole mixer/sink mixer) for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specifeid and directed by Engineer in Charge.
90S&F in repairs harrison rails, SS steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and directed..
91Dismantling water tanks n. exc. 500 ltr capacity and removing from site complete all as specified and directed..
92M & L for rotational moulded polyethene water storage tanks 500 litrs capacity (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified & directed
93Dismantling water tanks exc. 500 ltr & n exc 1000 ltrs capacity and removing from site complete all as specified and directed.
94M & L for rotational moulded polyethene water storage tanks 1000 litrs capacity (cylindrical vertical with threaded closed top) hoisted and fixed in position all as specified in SSR part-I complete all as specified & directed
95S&F in repair 25 mm dia gun metal ,globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed,
96S & F in Steel Plate Rack made of stainless steel 0.60mm Thick size 900x750mm, 250mm deep, fixed in position with plugs, washers and steel screws complete, all as specified
97S & F sinks with drainage board made of stainless steel 1 mm thick kithcen or laboratory with plugs, washers and wastes, including bedding in cment mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 m bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
98S & F 20mm dia ball brass valve high pressure with polythene float and fly nut complete scrwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
99S&F in repair PVC valveless, syphonic action type,10 ltr capacity flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with fixing of flush pipe of polyethyne of low or high density or PVC 32mm dia, for low level cistern complete all as specified and as directed.
100S&F in repair for Single Piece EWC Seat Cover of any size, any type and any description or any colour as per ground condition complete all as specified and Directed . Make: Jaquar ,Essco or any equivalent make
101M & L for PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe, type B, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as specified and directed..
102M & L for PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, type B, singe socketed, in any length with Rubber Ring Joints fixed to walls, including taking down unserviceable pipe, fittings, etc, complete all as specified and directed.
103M & L for PVC (SWR) 110mm bore (dia) soil, waste and ventilating pipe,type B, singe socketed, in any length with Rubber Ring Joints fixed to floor , including taking down unserviceable pipe, fittings, etc, complete all as specified and directed.
104M & L for PVC (SWR) 75mm bore (dia) soil, waste and ventilating pipe, type B, singe socketed, in any length with Rubber Ring Joints fixed to floor, including taking down unserviceable pipe, fittings, etc, complete all as specified and directed.
105M & L for PVC (SWR) 110mm bore (dia), Bends any type, with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
106M & L for PVC (SWR) 75mm bore (dia), Bends any type, and Jointing with Solvent Cement, complete all as specified and as directed.
107M & L for PVC (SWR) 110mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
108M & L for PVC (SWR) 75mm bore (dia), Single T Junction equal or unequal with Access Door, etc. and Jointing with Solvent Cement, complete all as specified and as directed.
109S & F for PVC (SWR) floor trap 110 mm with gratings including Jointing to waste pipe with solvent cement complete all as specified and directed. .
110S & F 5.5mm thick Sheet glass,ordinary quality and fixed with rubber packing and aluminium snap beading in aluminium doors in square exc 0.5 sq. m in each pane complete all as specified and directed.
111S & F mortice lock brass, 4 levers, vertical type, Size 100mm complete all as specified and directed.
112S & F Aluminium (die cast body) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. fixed in repair complete all as specified and directed.
113S & F 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and directed.
114M & L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed in repair complete all as specified and directed.
115S & F in repair brass door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete.
116Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; flat iron for framing grills, framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified.
117Taking down aluminium door shutter n. exc. 2 sqm each, taking out servicable glass panes, hydraulic door closer, butt hinges, double action hydraulically regulated floor spring and other fittings, if required carefully and refixing in the same opening after repairs of unservicable or loosened joints/cleats of top rail/bottom rails/ lock rails and styles etc and fixing old servacable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fittings complete all as directed by Engr-in-charge. NOTE:- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule.
118M&L for cement concrete type B-0 1:2:4 (12.50mm graded crushed stone aggregates) as in padding over roofs, lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, copings, kneelers, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including demolition of concrete of any description and in any position complete all as specified and directed by Engineer in Charge.
119M&L for water-proofing treatment on horizontal and vertical surfaces by applying oil bound bitumen primer and 0.40kg/ Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 kg/ Sqm reinforced with non woven polyester matt weighing not less than 160 gms/Sqm incl minimum 10cm side lap and 15cm end/ longitudinal lap torch sealed and bonded and applying two coats of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 kg/ Sqm in drying over the membrane finished with solar reflective bituminous paint/ primer @ 0.10 kg/ Sqm over RCC roof slabs/ projections/ parapets after cleaning the surfaces by removing dust, dirt etc, as manufacturer's instructions including reremoval of existing APP membrane sheets of any thickness and position complete all as specified and directed by Engineer in Charge
120M&L for 10mm avg thick rendering cement mortar 1:3 mixed with liquid water proofing admixture complete all as specified and directed by Engr-in Charge (Note liquid WPC shall be measured and paid sepeately)
121Disconnecting of existing PVC /Ferro cement/MS Tank of capacity exc 250 ltr but n exe 500 ltrs for cleaning and removing all scale and dirt etc from tanks and from mouth circulating pipes etc and hoisting if required , reconnecting and refixing in position all as directed by Engr-in-Charge
122Disconnecting of existing PVC /Ferro cement/MS Tank of capacity exc 500 ltr but n exe 1000 ltrs for cleaning and removing all scale and dirt etc from tanks and from mouth circulating pipes etc and hoisting if required , reconnecting and refixing in position all as directed by Engr-in-Charge
123M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over screed bed or bedding layer of mortar 15 mm thick for laying floor finishes CM 1:6.
124S&F in repair Black out roller blinds of required and shade and necessary fitting of Johnson or equivalent Make complete all as per direction of Engr in Charge/GE
125S&F in repair 8mm thick Laminated wooden flooring with plank size not less than 1200mmx190mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a hingh density fiber board having densitry > 850kg/cum , substrate core over a rasin saturated packing layer and installing through unilin/tongue-groove system (having locking strenght not less than 1000kg/mtr) over a 2mm thick under layer polyurethene foam on polythene sheet 250micron over a smooth/flat hard sub-floor free from moisture (less than8%) , grease etc complete in all respect requisite accessories like end profile tranisition profile , reducer tee profile etc wherever required and preparation of base including all other incidental works as per direction and satisfaction of Engineer-in-Charge.
126M & L for mirror polishing of machine cut Kota stone/ganite/ marble as in flooring, skirting, steps of 18-20 mm thick ,complete all as specified and directed.
127GI frame work for seamless ceilling comprising of GI permeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.90mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each lips of 10.50mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish and applying two coats of distemper over 1mm thick wall care putty, complete all as specified and directed by Engr-In-Charge.
128M&L for sunken slab/tank portion treatment comprising of following: (a) Taking out/down old existing sunken slab treatment including tiling, PC and cleaning the old RCC surfaces of sunken slab including removal of the rubbish out of campus complete all as specified. (b) M&L for 25mm thick PCC type B-1 using 20mm graded stone aggregate over cleaned sunken slab surfaces. (c) M&L for applying bitumen priming coat/tack coat over PCC @ 0.30 kg/Sqm. (d) M&L for 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/Sqm reinforced with non-woven polyester matt weighing not less than 160gm/sqm including minimum 10cm side lap and 15cm end lap torch sealed and bound. (e) M&L for applying bitumen grade 85/25 over primer coat @ 1.20 Kg/Sqm. (f) M&L for 25mm thick plastering (in two layers 15mm 1st layer, 10mm second layer) in Cm 1:4 mixed with liquid water proofing admixture as per manufacturer instruction over 225mm thick PCC 1:4:8 using 40mm graded stone aggragate complete all as specified and directed by Engr-In-Charge.
129S&F 12 mm thick toughened glass shutters (single Leaf openable type) with diamond polished edge, clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instructio including following fittings complete. (a) Stainless steel top patch (cat No. EPF - 701) 01 set (b) Stainless steel top pivot (cat No EPF-712) 01 set ©Stainless steeel bottom patch (Cat No EPF-702) 01 set (d) Glass to wall stainless steel lock (Cat No FH-ECO -842) 01 set (f) Stainless Steel Handle 300mm size (Cat No ESBH-011) 02 Nos for each shutter . note :- Cat No. mention above for hardware fittinga are of make ENOX, contractor may use similir type hardware fitting of make DORMA/OZONE. make of glass ATUL/MODI/GURD/SAINT GOBAIN/JINDAL/INDAL/HINDAL/WALCO.
130S&F in repair 12mm thick toughened glass partition (with or without opening/door shutters with diamond polished edge, clear glass including all hardware fittings detailed as under, fixed in position as per manufacturer instruction including following fittings complete. (a) Stainless steel top patch (cat No. EPF-701) 01 set (b) Stainless steel top pivot (cat No EPF-712) 01 set (c) Stainless steel bottom patch (Cat No EPF-702) 01 set (d) Glass to wall stainless steel lock (Cat No FH-ECO - 842) 01 set (f) Stainless steel Handle 300mm size (Cat No ESBH-011) 02 Nos for each shutter, Note: Cat No mentioned above for hardware fittings are of make ENOX, contractor may use similar type hardware fitting of make DORMA/OZONE. Make of glass ATUL/MODI/GURD/SAINT GOBAIN/JINDAL/INDAL/HINDAL/WALCO.
131Taking down, Repair and Refixing Toughened glass door including all fittings like heavy duty Floor Door Springs, Handles, Locks, Hinges, Pivots or top patch fittings etc as in repair to make it serviceable and fixed in same opening complete all as specified and as directed by Engineer in Charge. Note: Items used to make existing Toughened glass door serviceable shall not be measured and paid seperately. Contractor should consider it while quoting his rate.
132S&F high performance self-adhesive polymeric decorative/privacy glass-film of any type (transparaent/semi transparent/frosted/textured as approved) on existing glass panels fitted in aluminium and wooden door/window joineries, partitions, ventilators etc. The work shall include cleaning of glass surface and acheiving bubble free finish as directed. Rate shall include supply of film, surface preparation, scaffolding/staging at any level, wastage, cleaning and all labour, materials complete as per direction of Engineer-in-Charge.
133Supply fabricate & fix in position aluminium partition wall with top, middle and bottom frame of size 101.60x44.45x1.75mm weighing 1.367KG/RM, partly glazed with 5.5mm thick tinted glass with or without sash bars and partly panelled with 4 mm thic ACP board with both side decorative including rubber bead joining cleat for fixing in position, complete all as specified and directed by Engr-In-Charge.
134Deduction to be made from BOQ for Sch 'A' Part-II (Schedule of credit) Note: Tenderers shall not quote for this schedule. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58381483
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Comprehensive Repair To Otm Accn Under Age B/R-Ii At Mil Stn Yol
Basic Detail
Tender No GE/Y-101/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 38 Lakhs
Tender Fee 500
EMD 76000
Exemption Available
Document List
BOQ_894341.xls
f387e78e-06f3-4e06-9ea4-f98e4201417e.html
tender101.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_894341.xls

html

f387e78e-06f3-4e06-9ea4-f98e4201417e.html

pdf

tender101.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender