Tender For Special Repairs To Bldg No T-65 And T-54 Lrw Shed At Mil Stn Dhrangadhra
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
5 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Bldg No T-65 And T-54 Lrw Shed At Mil Stn Dhrangadhra
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old cement plaster any description on brick or stone wall/ceiling etc including racking out joints, hacking for key, scrubbing down with water etc complete as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 3 | Demolition of reinforced cement concrete in any position not exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 4 | Demolition of Brickwork or stone/ boulder masonry, built in CM including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 5 | M & L for walling of random rubble, uncoursed well bounded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 6 | M & L for walling (Except stone) of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed. |
| 7 | Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints as specified ,of random rubble walling ,uncoursed or brought upto courses completed as specified and directed . |
| 8 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete all as specified and directed. |
| 9 | Taking down chowkats or frames but with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each complete all as specified and directed. |
| 10 | Dismantling floor ,hearth or wall tiling incl cement mortar bedding (but not backing) complete all as specified and as directed . |
| 11 | M & L, non skid joint free coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm, over and including 15 mm thick screed bed in CM 1:6 as in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed |
| 12 | M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed. |
| 13 | M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces on wall in CM 1:6 finished the plaster surfaces fair and even complete all as specified and directed. |
| 14 | M&L for 10 mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 15 | M&L for 10 mm thick rendering in CM 1:4 on external surfaces of ceiling, soffits, chajja projection etc complete all as specified and directed. |
| 16 | M&L for two coats of exterior emulsion paint (weather coat ,anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface over newly plastered surface of wall complete all as specified and as directed. |
| 17 | M&L for two coats of exterior emulsion paint (weather coat, anti dust of Berger or equivelent ) over a coat of primer over a thin layer of external wall putty to achive a smooth finish surface after complete removal of existing treatement complete all as specified and as directed. |
| 18 | Preparation of new plastered surfaces and applying two coat of oil bound distemper over and including a layer of wall care putty complete all as specified and directed. |
| 19 | Preparation of old plastered surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over and including a layer of wall care putty complete all as specified and directed. |
| 20 | Preparing of plastered or unplastered old decorated surfaces of walls by complete removal of existing treatment, moulds, moss and efflorescent salt and treating oil and greasy spots and applying three coat of white wash on walls including cornices etc complete all as specified and directed |
| 21 | Preparation of New plastered surfaces of ceiling and applying Three coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 22 | Preparation of plastered or unplastered old decorated surfaces of ceiling by brooming down or steel wire brushing, scrapping down smoke soots, treating oily/greasy spots, moss and efflorescence and applying two coat of white wash on ceiling including cornices etc complete all as specified and directed. |
| 23 | S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125mm long-12 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6., type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed. |
| 24 | S&F 1.25 mm thick Pressed steel frame size 105 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed. |
| 25 | M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed. |
| 26 | Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed. |
| 27 | S&F 35mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc(without sash bar), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass , etc size of members of shutters as specified in SSR part I ,section 8 clause 8.24(a) fitted to chowkats complete all as specified and directed. |
| 28 | S&F 300 mm long Aluminium alloy ,anodised sliding door bolt with hasp staple (bolt type ) and fixing clips of sheet ,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed . |
| 29 | S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed . |
| 30 | S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed. |
| 31 | M&L, preparing of new wooden surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 32 | M&L, preparing old previously treated surface of wood and wood based surfaces exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint on old decorated wooden surfaces, complete all as specified and directed. |
| 33 | M&L, preparing of new steel surface exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 34 | M&L, preparation old previously treated steel Surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint on the steel surfaces, complete all as specified and directed. |
| 35 | Dismantling wall and ceiling boards, partitions of any description or in any position (fibre, pulp, insulation etc.) any thickness, or insulation boards/ slabs/ blankets of any thickness including cover fillets complete all as specified and directed. |
| 36 | M&L for , false ceiling consisting of wall angles ,main T ,cross T all of size 25 mm X25mmX1.4mm thick power coated GI grid frame work jointed angle as directed and mild steel hooks not less than 4 mm dia with arrangement for adjusting heights of ceiling with and incl provision of 4 mm thick E boards sheet in panels of size 600mmX600mm with necessary off cuts and fixing arrangements for ceiling ,tube light fitting complete all as specified and as directed. |
| 37 | S&F standard aluminium section powder coated any colour as approved for three track window/ventilator frames/shutters sliding/ partitions etc including jointing cleat and rubber eading/linning, Pivot ,locking aragement and all hardware etc and fixed in position with stainless steel screws all as specified and as directed. |
| 38 | S&F in repair sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.8 sqm in each pane complete all as specified and as directed. |
| 39 | S&F M.S Framed work such as grills gratings etc with ends of bars sholdered and/or riveted into spikes ,framed guard bars /railings complete all as specified and as directed. |
| 40 | M&L second class hard wood scantlings clean sawn for framed work in repair to replace old and decayed timber and removing defective portion to stone complete all as specified and as directed. |
| 41 | S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture ,fixed with tined tacks or galvanised wire staples complete all as specified and as directed. |
| 42 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fit-ted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 43 | S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed |
| 44 | S&F, aluminium, anodised barrel tower bolts 200mm long of extruded section and fixed complete all as specified and directed. |
| 45 | S&F , butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed. |
| 46 | S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed. |
| 47 | M&L for RCC 1:1.5:3 type A-1 as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and as directed. |
| 48 | Use and waste of form work to soffit of suspanded slab such as roof slab ,floor slab landing and similar work n exc 200mm thick (horizontally or sloping complete all as specified and as directed. |
| 49 | M&L for MS TMT bars10mm dia and over cut to Length bent to shape required including cranking, bending, spirally for hooping for columns with an incl MS wire(Annealed not less than .90 mm Dia) or securing with clips complete all as specified and directed. |
| 50 | Granite (of any type/ colour) work (table rubbed and polished) 18 to 20mm thick in steps jambs,pillars, window cills, cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete. |
| 51 | Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed. |
| 52 | M & L, Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in single length complete all as specified and directed. |
| 53 | M & L Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour (as approved by GE) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 54 | S&F rolled mild steel section as in main and cross beams hip and jack rafters , purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates conforming to Fe-290, Gde E-165 all as specified and directed. |
| 55 | All as per item No 49 above but except material complete all as specified and as directed. |
| 56 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 57 | S&F in repairs bib taps cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 58 | S&F in repairs Stop valves/ Angle valves cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe. |
| 59 | Supply & Fix in repair vitreous china counter top wash basin oval shape, size 550 x 400 mm including PVC waste pipe and waste coupling fixed complete all as specified and directed. |
| 60 | Supply & Fix in repair 600 mm long PVC Connection 15mm size with PTMT nuts complete all as specified and directed. |
| 61 | Supply & Fix in repair 15 mm dia pillar tap (long nose)cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, with or without lettered \\"Hot or Cold\\" with long swan neck swivel type screwed for iron pipe and fixed complete all as specified and directed. |
| 62 | Supply & Fix in repair 15 mm bore Stop valves cast copper alloy chromim plated fancy type with long shank and cup (concealed type) screwed down , high pressure , screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 63 | S&F in repair vitreous china squatting pan, orrisa pattern, size 580mm x 440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including making good to disturbed floor with PCC complete all as specified and directed. |
| 64 | Supply & Fix in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe ,with PVC cover sheet in same colour etc complete all as specified and directed. |
| 65 | S&F C P Hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, all as specified and directed. |
| 66 | S & F in repair Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 67 | S & F Soap dish chromium plated approximate size 160x 160x90mm complete all as specified and directed. |
| 68 | S&F 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) complete all as specified and directed. |
| 69 | S&F in repairs PVC low level 10 lit capacity valveless syphonic action type flushing cistern including 32mm dia PVC flush pipe fixed in repairs complete all as specified and directed |
| 70 | Supply & Fix in repair vitreous china urinal, Half stall type, white (excluding flushing cistern) incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe incl supply and fixing of 32mm bore 60mm long discharge pipe complete all as specified and as directed. |
| 71 | S&F towel rail 600mm long of chromium plated with and incl chromium plated brass screw and wooden /plastic cleats complete all as specified and as directed. |
| 72 | S&F chromium plated brass Peg set of Six fixed with brass screw and wooden /plastic cleats complete all as specified and as directed. |
| 73 | S&F 600x450 mm bevelled edge of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. |
| 74 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position including dismantling complete all as specified and directed. |
| 75 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 76 | Refixing old serviceable 15 mm GI tubing and connection in new or old position (concealed in Wall, ceiling & floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. |
| 77 | S&F in 15 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 15 mm bore steel tubing and connections complete complete all as specified and directed. |
| 78 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 79 | Refixing old serviceable 20 mm GI tubing and connection in new or old position (concealed in Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete all as specified and directed. |
| 80 | S&F in 20 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid concealed in floors incl cutting chases where required incl taking down 20 mm bore steel tubing and connections complete complete all as specified and directed. |
| 81 | S&F 20mm Gate valves with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and as directed. |
| 82 | Supply & Fix in repairs, 75mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and fixed to wall with PVC holding clamps complete all as specified and directed. |
| 83 | S&F in repairs, 110mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches or in floors and vertical surfaces complete all as specified and directed. |
| 84 | S&F in repairs, 125/110mm bore PVC (SWR) 'P’ trap complete all as specified and directed. |
| 85 | S&F in repairs, 75mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed. |
| 86 | S &F PVC (SWR) 75 mm dia vent cowl complete all as specified and as directed. |
| 87 | S&F in repairs, 110mm bore PVC(SWR) bends any radius, complete all as specified and directed. |
| 88 | M&L for 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded Stone aggregate in plinth protection finisheed even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 metre and at change in direction. |
| 89 | M&L for cement concrete 75mm thick type C-2 (1:3:6) using 40 mm graded agg as in sub base to flooring and including demolition of existing concrete work. |
| 90 | Demolition of precast concrete articles and pre-cast cement concrete block walling, ashlar fencings, dressed stone work including all quoins, arches, pillars etc. built in cement mortar complete all as specified and directed. |
| 91 | M&L, precast cement concrete Block Masonary with solid blocks type C1, 1:3:6 (20mm graded stone aggregate) exc 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 92 | M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed. |
| 93 | M&L for machine cut kota stone slab flooring 18-20 mm thick with white marble all arond 150mm wide over and including 15mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror finshed polishing in complete all as specified. |
| 94 | M&L for machine cut kota stone slab, 18-20 mm thick in riser and thired single piece on steps, skirting, dado and pillar laid over and including 10mm thick rendering in CM 1:4 including grinding and mirror finshed polishing complete all as specified and directed. |
| 95 | M & L for rubbing and polishing to existing old kota stone slab/marble/terrazzo flooring and skirting to achieve required finish complete all as specified and directed. |
| 96 | S & F 1800mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 97 | Demolition of plain cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 98 | M&L for Hardcore Broken stone or boulders of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick ,watered and rammed to a true surface complete all as specified and as directed. |
| 99 | M&L for PCC in 1:5:10 type E-2 (using 40 mm graded stone aggregate) as in subbase of floors etc, complete all as specified and directed. |
| 100 | S&F Machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded with and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified & as directed. |
| 101 | M&L for cement concrete 25mm thick type B-0 (1:2:4) using 12.5 mm graded agg as in sub base to receive floor finishes complete all as specified and as directed. |
| 102 | M&L for rubber moulded exterior grade joint less coloured tiles, 10mm thick, area exc 0.06 sqm but n.exc 0.38 sqm with grey cement and pigments set & jointed and pointed in neat cement slurry over and including 15mm thick cement screed bed in cm 1:6 with grey cement and pigments complete all as specified and directed. |
| 103 | S&F plain aluminium sheeting 0.56mm thick , alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing ( length and girth as fixed). complete all as specified and directed. |
| 104 | S&F 28mm dia fancy type Stasinless steel dropery rod fixed with stoper, brackets etc to wall complete as sample approved all as specified and directed by Engr - in - charge. |
| 105 | S&F in repair RCC NP3 150 mm diameter Pipes laid on150 mm thick PCC Cradle PCC 1:4:8 bed with excavation in depth 0.70m – 1.65 m in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional. |
| 106 | Dismantling structural steel work including door , gatesbut excluding framed truss etc. complete all as specified and as directed. |
| 107 | Taking down carefully copper/aluminium point wiring (Light, fan, socket or power etc.) complete including fitting such as switches, socket, ceiling roses, pendants/batten holder, regulators etc. all as specified and directed by Engr-in-charge. |
| 108 | Taking down existing unserviceable MCB DB SPN / TPN along with MCBs complete by disconnecting all as directed. |
| 109 | Taking down existing unserviceable light fitting any size complete all as specified and as directed. |
| 110 | Taking down existing unserviceable sub main wiring 2.5/4 Sqmm aluminium/copper cable all as directed. |
| 111 | M&L for point wiring for one light/fan/bell point controlled by one switch one way in & including PVC conduit concealed in brick or stone wall using FRLSH PVC unsheathed multistrand copper conductor wire 1.5 sqmm single core for one light/fan point controlled by one switch including modular white cover plate with frame of suitable modules over modular metal flush box concealed type for earth continuity insulated PVC unsheathed (green colour) 1.5 sqmm copper earth wire connected to common earth dolly using complete all as specified and directed by Engr-in-charge. Note : (i) wiring shall be done by using proper colour coding. |
| 112 | (a) One light point controlled by one way 5 Amps switch |
| 113 | (b) One ceiling fan/exhaust fan point controlled by one, one way 5 Amps switch |
| 114 | (c) One 3 pin socket outlet 5 Amps on independent board |
| 115 | (d) One 3 pin socket outlet 5 Amps on same board |
| 116 | (e) One Bell point controled by one bell push on same board with other switches or on independent board. |
| 117 | All as per srl item No. 111 here-in-before but for 6/16 Amp independent socket outlet using 2.5 sqmm single core wire (for phase, nuetral and earth) complete all as specified. |
| 118 | Supply & Fixing 5/6 Amps 1 way one modular switch complete. |
| 119 | Supply and Fixing 5/6 Amps three pin socket modular complete. |
| 120 | Supply and Fixing 15/16 Amps one way one modular switch complete. |
| 121 | Supply and Fixing 15/16 Amps three pin socket modular complete. |
| 122 | Supply and Fixing bell push 5 Amp modular switch complete. |
| 123 | Supply and Fixing Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body. |
| 124 | S&F fan step type regulator suitable for 1200mm sweep ceiling fan 2 module complete all as specified and directed. |
| 125 | M&L bell electrical ding dong 5 Amp 230 volt complete all as specified and as directed. |
| 126 | M&L for Sub main wiring with two single core FRLSH wiring of 4 Sqmm, 03 runs (for Phase & Neutal) single coresingle core, PVC insulated, unsheathed FRLSH cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe and accessories on surface wall/floors/concealed etc. with one run of PVC insulated, 4 Sqmm FRLS copper conductor for earth continuity all as specified and as directed. Note :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length. |
| 127 | Disconnection and removing the u/s light fitting and S&F LED Batten box type made of CRCA sheet including 1X20 watt retro LED tube rods and pre-wired with high efficiency electronic driver and connecting with three core PVC copper flexible cable of size 23/.0076 from ceiling rose to connector block complete all as specified. |
| 128 | S&F in repir LED Mirror light fitting complete made out of CRCA Sheet including 1x10watt LED rod complete connecting up with three core pvc copper flexible cable of size 23/.0076 from ceiling rose to connector comlete all as specifid and as directed by Engr in charge. |
| 129 | S&F in replacement LED flat panel of size (2' x 2'), 36 Watts, environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness of white/warm white in colour, SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed by Engr-in-charge. |
| 130 | S&F batten holder bakelite complete all as specified (ISI Marked). |
| 131 | Disconnection and removing the u/s LED lamp and S&F LED lamp 9/15 watts complete all as spfd and directed. |
| 132 | Labour only for Cutting openings, through brick walls for fixing of exhaust fan, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core etc. and rubbish not exc. 50m. Forming jambs, etc. to openings for 300mm to 450mm exhaust fan including cutting in wall fo cement mortar 1:6, toothing, and properly bonding into old work, also facing, jointing and pointing to match existing work, complete |
| 133 | Disconnection & taking down the unserviceable Ext fan and S&F Exhaust fan, MS body AC single Phase 230V of size 350mm sweep heavy duty with blade and frame and louvers including connection with 0.5sqmm multistranded copper conductor flexible wire from ceiling rose, necessary fixing arrangement i.e anchor nut, bolt, washer, grouting and making good to disturbed surface complete all as specified and as directed. |
| 134 | Disconnection and removing U/S Ceiling fan deposit to MES E/M store and S&F ceiling fans 1200mm sweep energy efficient Five star rated 230 volts with brushless direct current motor (BLDC) with blades, down rods, electronic regulator control type and accessories with brushless direct current motor (BLDC) including down rods and connecting up with 3 runs of suitable size single core PVC insulated but unsheathed, FRLS cable with multistanded copper conductors from ceiling rose to fan complete all as specified and as directed. |
| 135 | Supply and fix electric water heater, storage type steel body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated, 230Volts, single phase, 50 Hz AC, energy saving high density PUF insulation complete with all accessories such as safety valve, thermostate, NRV, inlet and outlet (cold & hot) PVC pipes upto 450mm long, with 15A plug top etc. complete all as specified and directed. |
| 136 | Supply and fixing double door 4 way 415 volts Vertical TPN MCB Distribution board factory made powder coated with suitable size of copper wire and provision for earthing neutral and earth link, including 3 pole MCCB 100 Amp rating, 25KA breaking capacity for incoming supply and including necessary MCB SP/SPN/TP for outgoing supply with concealed in all after cutting the wall and mending good the damages to original finish incl, Inter connection all as specified and directed. Note : DB, MCCB and MCBs are of the same make. |
| 137 | Disconnection and removing the u/s MCB plug and socket unit and S&F moduler PVC box, 20A Socket and 20Amp moduler MCB SP, 10KA, 240 volt including 20Amp top complete all as specified. |
| 138 | S&F Sheet metal enclosure double door for DB's SPN 8 way 240 V having 200 A rated bus bar complete all as specified and directed by Engr-in-charge. |
| 139 | S&F MCB SPN 32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 140 | S&F MCB SP 6-32A, 240 V -10 KA all as specified and as directed by Engineer-in-charge. |
| 141 | Disconnection & taking down the U/S building street light and S&F 30W New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK06 for bldg security light with GI pipe bracket of suitable size for fitting complete all as specified and directed by Engineer-in-charge. |
| 142 | Supply and laying GI tubing light grade in tranches for protection of cable for 40 mm dia in cluding taking out. old pipe complete all as diercted by Engr -in-charge. |
| 143 | Dismantling the earth chamber, Excavation and removing the u/s earthing materials along with u/s and M&L for earthing complete with galvanized steel earth plate, electrode 60cm x 60cm x 6.0mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 2.25 mtr below normal ground level, connected to GI wire 4cmm dia as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, connected to earthing test point, earth plate electrode surrounded by mixer of common salt and charcoal dust, including 20mm dia GI watering pipe ‘medium grade’, GI protection pipe of size 20 mm dia upto 7.5 mtr length , funnel with wire mesh, earthing chamber with cement concrete (1:2:4) type B-1, RCC chamber cover 80mm thick (1: 1 ½ : 3) type B1, excavation & earth work all as shown in electrical plate No 5 of SSR (Part-I) and testing on completion, complete all as specified and directed. |
| 144 | Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sq mm 4 Core. |
| 145 | Excavation in treches not exc 1.5m in width and 1.5 M in depth for foundation of pole, laying of cables etc in Hard and dense soil and getting out. |
| 146 | Returning, filling in including spreading levelling, watering, and well ramming in layers not exc. 25 cm in soft/loose soil. |
| 147 | Removing excavated materials not exc 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point. |
| 148 | M & L for sand filling using approved clean dry sand for cushioning of ug cables incl spreading levelling and well ramming in layers not exc 25 cm. |
| 149 | M/L for sub class 'B'old size burnt bricks of class designation 100 ,for cable protection laid length wise perpendiculer to the axis of the cable complete all as specified . |
| 150 | Supply, Jointing & laying of Steel tubing medium grade galvanised of size 25mm dia laid in trench or fixed to wall complete all as specified & directed. |
| 151 | Supply, Jointing & laying of Steel tubing medium grade galvanised of size 20mm dia laid in trench or fixed to wall complete all as specified & directed. |
| 152 | M&L for cutting or RCC/road for laying of GI Pipe and making good to match with the existing using extra cement etc. complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 24, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender