Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58381438

Tender For Special Repairs To Building No. T-11, T-14, T-18 And T-21 At Mil Stn Dhrangadhra

Issued by Statutory Bodies & Commissions/Committees · Surendranagar, Gujarat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
87000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Surendranagar → Gujarat
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repairs To Building No. T-11, T-14, T-18 And T-21 At Mil Stn Dhrangadhra

BOQ

Name of Work:- SPL REPAIRS TO BUILDING NO. T-11, T-14, T-18 AND T-21 AT MIL STN DHRANGADHRA
Sl. No. Item Description
1Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.
2M & L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
3S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covenng/cladding to wall, fixed with self tapping screws complete all as specified and directed.
4Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
5S&F Joist, channel, angle, or tee sections,fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc conforming to Fe-410 Gde E-250 quality A complete all as spd and as directed by Engineer in Charge
6S&F, standard aluminium section powder coated any colour as approved for window/ventilator frames/three track shutters sliding/ fixed/ louvered/ partitions etc. including jointing clear and rubber eading/linning, Pivot, locking aragement and all hardware etc. and fixed in position with stainless steel screws all as specified and as directed.
7M & L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complet of Fe 410 -W (Gde- E- 250) quality- A Fe complete all as specified and directed.
8S&F, for Steel rolling shutters of 1.00mm thick laths, gear operated type withbevel gear box and crank handle, as specified including top cover, anchoring rd, hasp and staple and one shop coat of primer, erected in position as indicated complete all as specified and directed.
9S&F for safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
10S&F, Ball bearing for rolling shutter complete all as specified and directed.
11S&F MS framed work such as grills, guard bars of window, weapon rack stand and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed.
12S&F, in repair, 16mm thick of size 605 x 605mm HSPC (high pressure Stem Cured) pre-primetered self embossed, textured disigner board E-board classic to be fixed anodised alunimium snap grid/section size 605mm x 605mm with main runner, fross tee and wall angle duly suspended with 6mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing procisions for light fixtures of any size complete all as specified and directed.
13M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetc enamel paint over a coat of red oxide primer complete all as specified and directed.
14M&L for preparation of old steel surface of any description exc. 10cm width or girth not otherwise described and evenly applying two coat of synthetc enamel paint complete all as specified and directed.
15M&L for 15 mm thick rendering in cement mortar 1:4 on fair face of brick works or concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed. Note: WPC shall be measured and paid separately.
16M&L for 15mm thick rendering in CM 1. 6 on stone masonry surface or surface other than fair face of brickwork surface finished fair and even without using extra Cement complete all as specified and directed.
17Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
18M&L for preparation of new surfaces of plastered or unplastered of wall and application of three coat of white washing complete all as specified and directed.
19M&L for preparation of new plastered surface and applying two coat of oil bound distemper on walls over a coat of chalk whiting complete all as specified and directed.
20M&L for preparation of old decorated plastered surfaces of walls and applying three coat of cement base paint of approved shade/tint complete all as specified & as directed.
21M&L for preparation of old decorated plastered surfaces of walls and applying two coat of cement base paint of approved shade/tint complete all as specified & as directed.
22M&L preperation of new surfaces of walls and applying two coats of oil bound distemper over a coat alkali-resistant primer etc completed all as directed and specified.
23Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
24M&L for 25mm Thick Cement Concrete Type B-1, 1:2:4 (20mm Graded Aggregate) complete all as specified and directed.
25M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.
26M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete as specified and directed.
27Taking down old rolling shutter including ball bearing and gear box etc. complete all as specified and directed.
28Supply only polyester triangular fibrea as secondary reinforcement in all typeof concrete and mortars complete all as specified and directed.
29Supply & Fix 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
30Taking down chokhats or frames (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4.00 sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.
31Taking down chowkats or frame of any description n exc 1.5 Sqm each (without taking off shutters from the frames) complete as specified and directed.
32S&F galvanised mild steel wire cloth 0.56 mm nomonal dia of bar and 1.18 mm avrage width of aperture, fixed with tined tacks or galvanised wire staples complete all as specified and as directed.
33M&L for mild steel TMT bars 10mm dia & over cut to length bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and bending with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
34S&F, 4.8 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.8 Sqm in each pane fixed with glass putty complet all as specified and directed.
35S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed.
36S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
37S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.
38S&F, aluminium handles 150mm size, cast type, anodised complete all as specified and directed.
39M&L for 50 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be laid to slope (1 in 30) in bays not exceeding 3 metre in length and joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with sealing compound grade B.
40Demolition of cement concrete (Un-reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified and directed.
41M&L for taking down , chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC Columns, beams, walls, chajjah etc and exposing the reinforced cement , wire brushing and cleaning the exposed steel reinforced bar, applying rust remover over the cleaned re-bar surface wash the re-bar with clean water for removing all rusts from the old re-bar surfaces, fixing new reinforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing polymer modified cement and quartz sand mortor in CM 1:3 mix , 40mm thk in two coats, using polymer SBR Latex or equivalent as approved @ 5 Ltrs per 50 Kg bag of cement complete all as per manufacturer's Specifications/instructions and as directed.Note :-( New reinforcement (Welded wire fabric) will be measured and paid separately) Make : Dr. Fixit/Sunanda/chemestik/Fosrok
42M&L for walling of random rubble, uncoursed well bounde, bedded and solidly hearted, built in Cement Mortar 1:6 complete all as specified and directed.
43Dismentling ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.
44Demolition of Concrete of any description and in any position complete all as specified and directed.
45Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
46M&L for walling of random rubble stone masonry, brought up to courses, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
47M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound in Grade 'A' complete all as specified and directed.
48Taking down carefully aluminum/copper point wiring (light, fan, socket or power) complete along with fittings such as switches, ceiling roses, bell, regulators sockets etc, and removing from site and making good distribut surfaces of walls, floors etc all as directed.
49Taking down existing unserviceable MCB DB/TPN/SPN/SP along with MCBs complete by disconnecting all as directed.
50Taking down existing unserviceable T/light fitting & box type fitting.
51Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information
52Taking down existing unserviceable sub main wiring 2.5/4/6 Sqmm aluminium/copper cable all as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58381438
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE Ref. Documents
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repairs To Building No. T-11, T-14, T-18 And T-21 At Mil Stn Dhrangadhra
Basic Detail
Tender No GE(A)/GNR/TOKEN/90 of 2026-27
Bidding Type Tender
Location
City Surendranagar
State Gujarat
Key Dates
Publish Date 04 Nov 2026
Submission Date 24 Nov 2026
Open Date 26 Nov 2026
Finance
Tender Value Ref. Documents
Tender Fee 500
EMD 87000
Exemption Available
Document List
3805b0f5-e180-480b-ba93-fe9b5440eb4c.html
BOQ_894348.xls
TenderDocuments.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 26, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 4 days

Tender Documents

Download All (ZIP) ↓
html

3805b0f5-e180-480b-ba93-fe9b5440eb4c.html

xls

BOQ_894348.xls

pdf

TenderDocuments.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender