Drinking Water Supply and Sanitation Government Departments Closing in 15 days TDR #58381235

Tender For Comprehensive Operation And Maintenance Of 100 Mld Water Treatment Plant Located At Bhola Ki Jhal, Meerut And Clear Water Feeder Main Including Supply Of Consumables And Other Appurtenant Works Under Deposit Program From Nagar Nigam, Meeru

Issued by Government Departments · Meerut, Uttar Pradesh
Tender Value
3.12 Crore
Estimated cost
Bid Submission
04 Dec 2026
15 days left
EMD
6.25 Lakhs
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Meerut → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Comprehensive Operation And Maintenance Of 100 Mld Water Treatment Plant Located At Bhola Ki Jhal, Meerut And Clear Water Feeder Main Including Supply Of Consumables And Other Appurtenant Works Under Deposit Program From Nagar Nigam, Meerut.

BOQ

Name of Work:- Comprehensive Operation and Maintenance of 100 MLD Water Treatment Plant Located at Bhola ki Jhal, Meerut and clear water feeder main including supply of Consumables and other appurtenant works under Deposit program from Nagar Nigam, Meerut.
Sl. No. Item Description
1Civil Works
2Cleaning and removal of settled silt/sludge from settling tanks twice a year of the Water Treatment Plant (WTP), including loosening, scooping, lifting and loading of the silt using suitable mechanical/manual means and transportation of the silt/sludge to a location outside the WTP campus as designated by the Engineer-in-Charge. The work includes cleaning the entire floor and slope areas of the settling tanks, ensuring complete removal of sludge, proper disposal of waste material at an approved site, and ensuring no damage to civil structures during operation. The cost includes supply of labour, T&P, loading/unloading, vehicle hire, and all incidental charges for complete execution as per direction of Engineer-in-Charge. Raw Water Pump House and Receiving Channel: if requires construction of separation wall 2.5mX2 m in passage required for ensuring continous water supply during cleaning desilting and cleaning of raw water pump house floors, pump bays, suction chambers, and open receiving channels. Includes removal of trash and sludge from screens, suction sumps and channel linings.
3Providing and applying food-grade epoxy painting on internal surfaces of all clariflocculator (CLF) units, including thorough surface preparation such as cleaning, surface grinding, removal of laitance, oil, or contaminants; followed by application of compatible epoxy primer and two coats of food-grade epoxy paint conforming to IS 9833 and approved for potable water use. The epoxy coating shall be non-toxic, chemical-resistant, and suitable for continuous water immersion, achieving a minimum DFT (dry film thickness) of 300 microns.In addition, all metal fixtures, MS components, gates, and embedded mechanical parts in the CLF unit shall be cleaned using wire brushing and anti-corrosion treatment, and then painted with two coats of high-quality anti-corrosive enamel or epoxy-based metal primer and finish paint. All work shall be executed to the highest standards using appropriate tools, labour, scaffolding, and safety measures, as per directions of the Engineer-in-charge.
4Comprehensive Cleaning of Water Treatment Units Annual cleaning of the potable water reservoir during the Ganga Nahar canal maintenance shutdown period (October–November). This item covers the systematic and scheduled cleaning, desilting, and disinfection of key raw and potable water handling structures within the Water Treatment Plant. All cleaning activities shall include removal of deposited sludge, algae, silt, and biofilm from bottom and wall surfaces, followed by antibacterial treatment using UV-based or approved food-grade disinfectants. All operations must be documented with photographs and logs, and carried out in accordance with best hygiene and safety practices.1 Clariflocculators Including Flash Mixers (03 Nos):Biannual cleaning of all clariflocculator units including internal walls, flocculation chambers, and flash mixer zones. Each cycle to include mechanical removal of sludge and residues, thorough scrubbing, and disinfection of all surfaces. Cleaning shall be carried out twice a year
52. Clear Water Reservoir (CWR – 1250 KL):complete dewatering, mechanical and manual cleaning of floor and walls, disinfection using UV-based sanitisation, and restoration for potable water storage.
63. Constant Pressure Tank (425 KL):complete dewatering, cleaning of internal RCC surfaces and hatches, and antibacterial treatment to maintain safe storage of filtered water under pressurised conditions.
74. Filter Bed House:Comprehensive cleaning of all filter beds, backwash troughs, underdrain channels and operating platforms . Includes removal of accumulated sludge, cleaning of gravel and sand media without disturbing their grading, flushing of backwash pipelines, and complete sanitation of the filter house structure
8Annual Comprehensive Horticulture Maintenance Work Within WTP Campus over 1.5 acre landscaped area, including routine watering through installed irrigation system, trimming and mowing of lawn grass, weeding, hoeing, pest control, termite treatment, pruning of shrubs and creepers, daily cleaning of garden area, maintenance of potted plants and climbers,Twice yearly plantation and maintenance of seasonal flowering plants (summer and winter cycles). stacking and application of manure, fertilisers, and garden soil, operation and repair of PVC irrigation network, and general upkeep including watch and ward. Contractor shall ensure healthy and presentable greenery throughout year.Minimum 01 experienced and dedicated gardeners (Mali) must be deployed on all working days.Monthly performance shall be reviewed based on visual inspection, completeness of coverage, and plant health. • A deduction of 2% of monthly payment per instance shall be applicable in case of:a) Patchy, dried, or unmaintained lawn areas.b) Dead or missing flower plants beyond 10% of planted quantity.c) Irregular irrigation or visible signs of water stress.d) Absence of required gardening staff on site for more than 2 consecutive working days without approval.
9Comprehensive Quarterly Maintenance of Feeder Mains (Leakage Repair, Valve Maintenance & Road Reinstatement):entire feeder main pipeline system laid within and outside the WTP premises, including routine patrolling, identification of leakages, immediate repair works, and complete restoration of the pipeline. The feeder main consists of pipelines of various diameters viz. 1500 mm, 1200 mm, 1000 mm, 800 mm, and 700 mm, and passes through various road sections and crossings. The contractor shall be responsible for locating any leakage or damage, excavation of the area, and cutting, removal, and replacement of the damaged section of pipe along with adjoining lengths on both sides, as required to ensure complete and durable rectification.All associated works including dewatering, removal of debris, supply and fixing of required joints/gaskets, reconnection of the system, testing of leak-proof performance, and reinstatement of the dismantled road surface (as per original condition CC/BT/interlocking as applicable,) shall be in the contractor’s scope and cost. under the supervision of the Engineer-in-Charge and a joint logbook shall be maintained for all such interventions.In case of any leakage or failure reported in the feeder main pipeline, the contractor shall be bound to take immediate action and rectify the same within 48 hours of reporting. Failure to attend the leakage within this stipulated time shall attract a monetary penalty,perleakage per day recoverable from the contractor’s running or final bills. The penalty shall be imposed based on the pipe diameter involved: ₹10,000 for 1500 mm dia, ₹8,000 for 1200 mm dia, ₹6,000 for 1000 mm dia, and ₹5,000 each for 800 mm and 700 mm dia pipelines. The item also includes maintenance, greasing, tightening, and repair (as required) of all inline valves such as scour valves, sluice valves, reflux valves, and air valves along the feeder main alignment. Defective or damaged valves must be repaired or replaced immediately using suitable mechanical equipment and materials
10Comprehensive painting work for the entire Water Treatment Plant (WTP) campus, including all existing structures and units such as treatment buildings, chemical house,bakwash control room, pump house, guard room, store, chlorination unit, reservoirs, staircases, compound walls, internal fencing, gates, and any other building or structure situated within the WTP premises include meticulous surface preparation, scrapping of old paint, cleaning, application of primer as required, and provision of three-coat painting (1 coat primer + 2 coats synthetic enamel/acrylic weather-proof paint) of approved shade and make, ensuring aesthetic uniformity throughout the campus. Before the painting, major repaeir works of roofs & ceilings if required minor civil repairs such as patch plastering, crack sealing, surface levelling, filling of chipped areas, and replacement of damaged portions (without changing major structural elements) shall be executed wherever necessary to provide a smooth and sound surface for painting. The contractor shall undertake a thorough pre-painting inspection of all units jointly with the Engineer-in-Charge and carry out all necessary preparatory works. All tools, plants, scaffolding, manpower, safety measures, transportation, and consumables shall be arranged by the contractor at his own cost. The final appearance of painted structures shall be clean, uniform, and professionally finished, giving the WTP a visually pleasing and well-maintained look.
11Painting and Repair of Iron Structures, Railings, and Mechanical Fixtures within WTP PremisesThorough cleaning, surface preparation, and protective painting of all iron works including safety railings, metallic supports, gratings, pipe railings, sluice gates, mechanical fixtures, and fabricated components installed across all treatment units such as clariflocculators, flash mixers, sedimentation tanks, aerators, and galleries. Work includes: • Cleaning of rusted surfaces by wire brushing and application of anti-corrosive primer; • Application of two or more coats of epoxy-based or approved synthetic enamel paint in standard colours; • Repair or replacement of damaged supporting members, railing pipes, fixtures, and welds with matching material and dimensions; • Proper finishing and repainting of manually operated gates, valves, and wall-mounted mechanisms; • Ensuring corrosion-free, structurally stable ironworks fit for operational use throughout the year.All works to be done as per relevant IS codes and as directed by Engineer-in-Charge. Complete in all respects including tools, materials, and manpower.
12Structural Repair and Waterproofing of WTP Buildings and Entry GatesCarrying out heavy civil repair works including rehabilitation of damaged roof slabs, RCC ceilings, and structural components of the Chemical House, Backwash Room, Filter House, and Administrative Building. The scope shall include removal of loose concrete, surface preparation by mechanical means, polymer-modified mortar patching, crack bridging with injection grouting (non-shrink type), followed by application of a high-performance elastomeric waterproofing system over treated surfaces.The item also includes structural repair and jacketing of damaged RCC columns at both entry gates, and supply, fabrication, and erection of LED-based signage boards with backlit acrylic lettering and weatherproof framing, complete with necessary supports and electrical wiring—complete in all respects as per site condition and engineer-in-charge directions.
13Provision of Bypass Arrangement at CLF Intake with 350 mm Dia DI Pipe (Length approx. 10–15 m)Providing, laying, and jointing of 350 mm diameter HDPE pipe for a length of approximately 10 to 15 metres to facilitate a bypass arrangement at the clariflocculator (CLF) intake, ensuring uninterrupted water supply during sludge removal or repair works. The scope includes excavation in all types of soil, cutting of existing RCC chamber walls for insertion of DI pipe, connection with already constructed bypass chambers, punching of holes, supply and fixing of DI fittings and sluice valves, rubber gaskets, nuts, bolts, flanges, anchor blocks, and other required specials. Work also includes proper alignment, jointing, leak testing, backfilling, and commissioning—complete in all respects as per direction of Engineer-in-Charge.
14Structural Repair, Rehabilitation, and Reconstruction (if Required) of Inspection Chambers within the WTP CampusUndertaking the structural rehabilitation and maintenance of various existing inspection chambers spread across the Water Treatment Plant premises, including but not limited to chemical dosing chambers, valve chambers, sludge drain chambers, washout chambers, and sampling pits. The scope of work shall comprise dismantling of deteriorated portions, surface preparation, repairing of internal and external walls with cement mortar plaster (in CM 1:4), grouting of cracks (if any), re-plastering, and application of waterproof cement-based coating where required.In case of severely damaged or missing chambers, construction of new chambers shall be done using brick masonry (class-I bricks) in cement mortar 1:4, with RCC top slab (M-20) and required reinforcement, complete with CI/RC covers as per site conditions and approved design.The item includes excavation in all types of soil, disposal of debris, base concrete (PCC 1:4:8), proper curing, and restoration of surrounding area. All chambers must be rendered structurally stable, watertight, and suitable for long-term operation.The contractor shall also carry out a comprehensive survey to identify all chambers, prepare a detailed inventory indicating location, type, physical condition (before and after repair), and submit photographic documentation along with the chamber-wise status report (soft and hard copy), duly certified by site-in-charge.
15Comprehensive maintenance, repair, and upkeeping of all internal roads and drains within the entire Water Treatment Plant (WTP) campus. This includes but is not limited to: all types of roads such as bituminous roads, cement concrete (CC) roads, interlocking tile pavements, approach roads, and internal driveways, whether located between units or along the periphery of the campus. includes repairing of potholes, damaged road stretches, loose joints in interlocking tiles, broken curbs, worn-out surfaces, and settlement patches as and when required. Reconstruction of severely damaged road stretches shall also be carried out at the contractor’s own cost using the same material and specifications as existing. Alongside roads, stormwater and surface drains (both open and covered types) within the premises are also to be maintained. This includes routine cleaning of silt and debris, de-choking of blocked sections, repair of cracks and broken drain sections, and replacement of damaged drain covers. The contractor shall ensure that no water stagnation or blockage occurs, All tools, equipment, materials, labour, and transport required for execution and upkeep shall be provided by the contractor at his own cost.
16Comprehensive maintenance, cleaning, and upkeep of all toilets, urinals, and bathrooms constructed in various operational and administrative units within the Water Treatment Plant (WTP) premises. The scope includes daily and periodic cleaning of toilet seats, urinal pans, washbasins, floors, walls, ventilators, plumbing lines, and fittings using approved antibacterial and disinfectant cleaning agents to maintain hygiene and odour-free conditions. The contractor shall also be responsible for the repair, replacement, or restoration of broken or damaged sanitary ware, flush tanks, taps, pipelines, water supply fittings, toilet partitions, latches, exhaust fans, and lighting arrangements at his own cost. Adequate provision of consumables such as phenyl, disinfectants, hand wash liquid, toilet paper, naphthalene balls, urinal mats, and air fresheners shall also be made by the contractor without any extra cost. Any malfunction or breakdown must be addressed within 24 hours, failing which deductions as per departmental directions shall apply.
17Comprehensive operation and maintenance of the Water Quality Testing Laboratory located within the WTP premises.Scope of work includes:▪ Daily water quality testing of inlet (raw water) and outlet (treated water) samples for all standard parameters including: Turbidity, pH, Residual Chlorine, Total Hardness, Calcium, Magnesium, TDS, Alkalinity, Iron, Fluoride, Nitrate, Ammonia, Sulphate, and Total Coliform / E. Coli, as per CPHEEO and BIS 10500 standards.▪ Periodic and as-required testing for advanced parameters, including heavy metals and trace contaminants such as Arsenic, Lead, Mercury, Chromium, Cadmium, Zinc, Copper, etc., especially in case of source contamination or regulatory requirement.▪ Water quality monitoring at all relevant units of the WTP/WDP, including: raw water inlets, clarifiers, filter outlets, chlorine contact tanks, clear water reservoirs, and other strategic sampling points.▪ Operation, maintenance, and calibration of all lab instruments and equipment, including spectrophotometer, pH meter, turbidity meter, BOD incubator, hot air oven, autoclave, and others. Timely procurement and use of all required glassware, reagents, indicators, chemicals, and consumables to ensure uninterrupted testing. Daily test result logs and weekly/monthly summary reports shall be maintained meticulously.▪ Installation and upkeep of a Process Flow Diagram (PFD) within the lab, clearly depicting each stage of the water treatment process and parameters monitored at each stage.▪ Online uploading of water quality data to the portal specified by Nagar Nigam Meerut or the Government of Uttar Pradesh. Contractor shall be responsible for ensuring data connectivity and arranging all required infrastructure such as desktop/laptop, internet, power backup, etc., at their own cost.▪ Regular cleaning and hygienic upkeep of the lab, including minor civil/electrical maintenance if required to ensure continuous functionality.▪ All expenditure including manpower, materials, logistics, equipment, consumables, testing charges, and portal integration shall be borne by the contractor.
18Furnishing, renovation, and interior development of a dedicated Executive Office-cum-Guest House unit inside the Water Treatment Plant (WTP) campus to facilitate regular visits, inspections, and on-site monitoring by Engineers-in-Charge, Superintending Engineers, and senior government/district officials.Scope of work includes:▪ Development of a fully furnished office cabin, complete with comfortable workstations, executive tables, revolving chairs, storage cupboards, file cabinets, and adequate lighting, fans, air conditioning (if required), and power points for official work.▪ Development of a Guest House or Visitor’s Lounge area to host senior officials and technical guests, including provision of premium-quality sofa sets, center table, visitor chairs, wall painting/art panels, curtains, aesthetic lighting fixtures, and other hospitality items.▪ Replacement of all existing old, damaged or non-functional furniture items with durable, ergonomically designed, and aesthetically presentable new furniture as per required quality standards.▪ Provision of interior upgrades, including minor civil/electrical works, floor polishing, painting/distempering of walls, false ceiling (if necessary), and installation of fixtures ensuring an environment befitting an institutional facility of ‘A’ grade.▪ Supply and installation of amenities such as water dispenser, tea/coffee unit, basic cutlery, sofa cushions, center rug/carpet, decorative elements (as required), all to be included in the lump sum scope.▪ Entire facility shall be kept in well-maintained, operational, and presentable condition throughout the year. All recurring minor maintenance and upkeep work shall be the responsibility of the contractor.▪ All materials, fittings, furniture, labour, transportation, taxes, etc., required for the work shall be borne by the contractor.
19Deployment of Plant Manager (1 No.)Provision of one qualified and experienced Plant Manager for overall supervision, daily monitoring, record keeping, and efficient functioning of all treatment units—complete in all respect
20Deployment of Safety Officer / Supervisor (1 No.)Provision of one trained Safety Officer to ensure adherence to safety protocols, maintenance of safety equipment, periodic safety training and documentation—complete as per standard safety norms.
21Deployment of Fitter/Helper (three for regular duty and one reliever for Sunday/holiday shift rotation)Provision of one unskilled helper to assist the fitter in routine mechanical maintenance, valve operations, and emergency repairs. In addition, the helper shall accompany the fitter for regular patrolling of the feeder mains to detect leakages, seepage, or abnormal conditions—complete in all respects.
22Deployment of Chemist (1 No.)Provision of one qualified chemist (B.Sc. Chemistry minimum) for daily testing of raw and treated water quality, chemical dosing monitoring, and maintenance of test records—complete in all respects.
23Deployment of Lab Assistant (1 No.)Provision of one lab assistant to support chemist in laboratory operations, including sample collection, preparation of reagents, and housekeeping of lab area—complete in all respects.
24Deployment of Watchman / Security Guard (4 Nos. – 3 + 1 Reliever)Provision of four trained security personnel (three for regular duty and one reliever for Sunday/holiday shift rotation) for 24x7 security of the WTP premises, visitor control, logbook maintenance, and regular patrolling—complete including uniform and basic security gear.
25E/M WorksSupply of following Chemicals at 100 MLD WTP.1- Poly Alluminium Chloride
262-Chlorine Gas
273-Polymer for silt
28Operating Staff for operation and maintenance of WTP and Intake works (The Provision of Staff is For 12 Months)1-Supervisor(1 No in each shift and 2 shifts in a day and a weeekly reliever)
292-Operator(1 No in each shift and 3 shifts in a day and a reliever)
303-Electrician (One per shifts in 3 shifts with releiver for 12 months) for Water Treatment Plant
314-Mechanic (02 No. Every month for 12 months)
325-Scada Operator at Scada Control room (1 no in each shift with 2 shifts in a day and a reliever)
33Operation & Routine/Preventive maintenance of all E/M equipments installed / spare at raw water intake units i.e sattling basin raw water sump etc. including gates, flow meters, pressure gauges, Pumping Plant related electricals panels complete as per manufactures/CPHEEO manual and instructions of the engineer-in charges. It also includes any sum required towards coverage of risk/hazards of staff, material and consumable during Routine / Preventive maintenance and as per tender documents.
34Operation & Routine/Preventive maintenance of all E/M equipments installed / spare for flash mixers, chlariflocculators, filter house, sludge thickner, filtrates sump, centifuge house recycling unit and all associated units related to these units, includes gear box bridge gates, LOH, ROH units, flowrited & other E/M equipments etc.
35Same as above but for CWR & chemical house substation including pumping plant, LT/HT eletrical panels transformers, PLC & SCADA System, Chlorinators & related E/M equipments etc.
361-Major repairing work of all E&M Equipments like all type of HT, LT Panels, Transformers, all type of Motor pump sets, valves, pipes, Actuaters including online PH analyser, online turbidity analyser & flow meter at inlet valve & flash mixture unit and PH analyser, Chlorine Analyser and flowmeter after filter bed unit etc. from UPPCL Meter to clear water reservior Electrical/Mechnical Equipments with supply of requried associated materials including SITC of External and Internal LED Lighting Work of the WTP Campus SITC of turbidity analyser after filter bed. In addition to this firm has to repair with in 7 days all the Electrical/Mechanical Equipments/Machines which are not working or demaged at the time of start the work without claiming any extra cost. 2-Comprehensive maintenance and upkeep of all electrification work with timely replacement/repair of all electrical fixtures such as ceiling fans, exhaust fans, tube lights, LED bulbs, switchboards, MCBs, internal wiring, outdoor lighting, high-mast/area lights, earthing arrangements, and distribution panels located in various operational buildings, laboratories, staff rooms, guest areas, pump houses, storage areas, toilets, and utility zones.Scope of work includes:▪ Regular checking, servicing, and upkeep of all existing electrical appliances and fittings, ensuring they are safe, operational, and in good working condition at all times.▪ Immediate replacement of fused or damaged lights, faulty fans, broken switches, wires, or loose contacts, using standard ISI-marked materials.▪ Ensuring continuous and proper lighting of critical areas, including water quality labs, operator rooms, staircases, pump chambers, chlorination units, campus lighting poles, boundary areas, and administrative zones.▪ Contractor shall arrange all required manpower, tools, testing instruments, replacement spares, wiring accessories, and safety equipment at his own cost.▪ Maintenance shall also cover concealed wiring, conduit repairs, junction boxes, holders, and minor wall damage repair caused due to electrical fault corrections.▪ All labour charges, consumables, taxes, and transport of materials are included in the scope, and no extra claim shall be entertained.This work shall ensure the WTP campus remains fully electrified, illuminated, and functionally maintained as per institutional safety
37Supply of Spare Non clog Back wash recycling pump(35HP) with suitable size submersible copper cable etc. complete in all respect. Including dismentling of existing pump its accessories Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58381235
AUTHORITY Government Departments
TENDER VALUE 3.12 Crore
LAST DATE 04-12-2026
Authority
Authority Name Uttar Pradesh Jal Nigam
Work Description Tender for Comprehensive Operation And Maintenance Of 100 Mld Water Treatment Plant Located At Bhola Ki Jhal, Meerut And Clear Water Feeder Main Including Supply Of Consumables And Other Appurtenant Works Under Deposit Program From Nagar Nigam, Meerut.
Basic Detail
Tender No 1094/NIVIDA/156
Bidding Type Tender
Location
City Meerut
State Uttar Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 04 Dec 2026
Open Date 05 Dec 2026
Finance
Tender Value 3.12 Crore
Tender Fee 11800
EMD 6.25 Lakhs
Exemption Not Available
Document List
BidDocument.pdf
BOQ_2284041.xls
d33344d6-9763-49c2-b560-3a5e040f97e0.html
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 04, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 15 days
Dec 05, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 16 days

Tender Documents

Download All (ZIP) ↓
pdf

BidDocument.pdf

xls

BOQ_2284041.xls

html

d33344d6-9763-49c2-b560-3a5e040f97e0.html

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender