Power Government Departments Closing in 6 days TDR #58376719

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Electrical System Or Installation, The Work Of Erection Of 11 Kv Lines For Construction Of Independence Feeder For Electrification Of Cw

Issued by Government Departments · Banda, Uttar Pradesh
Tender Value
61.20 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Gem

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Banda → Uttar Pradesh
EMD Exemption
Not Available
Quantity
1

Project Description

Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Electrical System Or Installation, The Work Of Erection Of 11 Kv Lines For Construction Of Independence Feeder For Electrification Of Cwr Vill Amlikaur-Kakra.. - The Work Of Erection Of 11 Kv Lines For Construction Of Independence Feeder For Electrification Of Cwr Vill. Amlikaur-Kakra Dera And Sonrahi (Tidwari) Of Jal Jivan Mishan Under Full Deposit Scheme 2026-27 Under Edd, Banda (Rural), Including Carriage Of All Required Material From E.S.C., Banda To Work Site, Alongwith Its Loading, Unloading & Dragging At The Respective Ends And Also Carriage Of Old/Damaged Scraped Material/Tfs From Site To Store Centre, If Any. All Works Like Erection, Fixing, Installation, Laying & Grouting Etc. Shall Be Done By Firm As Per Direction Of Engineer Incharge/Resspo Manual. During The Erection Of Lines/Poles Has To Be Done Including Cartage. Various Type Petty Materials/Work, Which Are Not Mentioned In Scope Of Work, But Actual Required Has To Be Arranged By Contractor At His Own Cost. No Extra Payment Will Be Made To Such Petty Requirement. The Material Supplied By Contractor Should Be The Best Quality And As Per Standard/Resspo Norms, Including Transportation, If Any. All Steel Material Supplied By Firm Have To Galavanised, Details Of The Work As Given Below :- , Supply Of Following Materials Including Loading, Unloading At Site :- , Stp Pole 11 Mtr. Long , Control Cable 4X2.5 Sq.Mm. , 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Xlpe Cable 3X120 Sq.Mm. , Guarding Angle With Clamp & Nut-Bolts , Gi Wire 6 Swg , 11 Kv Pin Insulator With Pin And Nut , 11 Kv Disc Insulator With Fitting , Stay Set Complete (Stay Rod 16X1800 Mm, Stay Wire 5 Kg., Stay Clamp, Bolt-Nuts Etc). , Earthing Complete (Earthing Rod Of 20X2500 Mm & 6 Swg Earthing Wire Etc.) , Top Channel With Clamp & Nut-Bolts , Ms Angle Cross Bracing With Clamps And Nut-Bolts, Washers , 11 Kv Vcb Incoming Ctr 600/300/5A , 11 Kv Vcb Outgoing Ctr 200/100/5A , 11 Kv V-Type Steel X-Arm , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X120 Sq.Mm. , 11 Kv Pilfer Resistant Metering Cubicle , Stone Pad , X-Arm Holding Clamp With Nut-Bolts & Washers For Stp , X-Arm Holding Clamp With Nut-Bolts & Washers For Pcc Pole , 11 Kv F-Bracket With Nut-Bolts & Washers , Alluminium Tape , Alluminium Binding Wire , Jointing Sleeves For Acsr Weasel , Danger Board With Clamp & Nut-Bolts , Barbed Wire , Number Plate With Clamp , Pg Clamp , The Work Of Erection/Installation/Fixing Of Following :- , Safe Carriage Of Following Material From Electricity Store Centre To Pit Site Of Work Through The Kachcha And Pakka Road, Including Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P Etc. Which Required For Proper Completion Of Work (Distance 00-50 Kms.) , Acsr Rabbit/Weasel/Dog Conductor , Pcc Pole 8.5 Mtr. Long , Erection Of Following Poles With Grouting Including Cutting Of Kharanja/Mettalic Road/Concrete Portion While Digging Pit & Compete Ht/Lt Fittings As Per Direction Of Engineer Incharge/Resspo Manual Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. , Pcc Pole 8.5 Mtr. Long , Stp Pole 11 Mtr. Long , Fixing/Erection Of Following Items, Cost Of Labour, Material And T&P Which Required For Completion Of Work :- , Stone Pad , X-Arm Holding Clamp With Nut-Bolts & Washers For Stp , X-Arm Holding Clamp With Nut-Bolts & Washers For Pcc Pole , 11 Kv F-Bracket With Nut-Bolts & Washers , Alluminium Tape , Alluminium Binding Wire , Jointing Sleeves For Acsr Weasel , Danger Board With Clamp & Nut-Bolts , Barbed Wire , Number Plate With Clamp , Pg Clamp , 11 Kv Pin Insulator With Pin And Nut , 11 Kv Disc Insulator With Fitting , Top Channel With Clamp & Nut-Bolts , 11 Kv V-Type Steel X-Arm , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X120 Sq.Mm. , 11 Kv Pilfer Resistant Metering Cubicle , Ms Angle Cross Bracing With Clamps And Nut-Bolts, Washers , Erection And Grouting Of Stay Set Complete Including The Work Of Nozelling Etc. As Per Resspo Manual. Grouting Material I.E. Cement, Sand, Brick Ballast/Stone Ballast Etc. Shall Be Arranged By The Contractor As His Own Cost. , Fixing Of Earthing Rod Complete As Per Direction Of Supervising Engineer/Resspo Manual. Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. , Laying, Sagging, Stringing, Binding And Jumpering Of Following Conductor/Cable On The Erected Poles In 33 Kv/11 Kv Ht/Lt Lines As Per Direction Of Supervising Engineer/Resspo Manual. Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. , Acsr Rabbit/Weasel/Dog Conductor , Control Cable 4X2.5 Sq.Mm. , 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Xlpe Cable 3X120 Sq.Mm. , Installation Of 11 Kv Vcb Incoming Ctr 600/300/5A As Per Resspo Manual And As Per Direction Of Supervising Engineer. , Installation Of 11 Kv Vcb Outgoing Ctr 200/100/5A As Per Resspo Manual And As Per Direction Of Supervising Engineer. , Re-Guarding/Guarding Of 11 Kv Line By Laying, Stringing, Sagging And Binding Of 2 Nos. Parellel Gi Wire 6 Swg After Providing, Fabrication And Fixing Of Guarding Angle And Fabrication And Fixing Of X-Guards (Tillis) Of Gi Wire At Distance Of 3 Mtr. , Note: Any Quantity Of Item From Sl No. 1 To Sl No. 2.33 May Vary To Any Limit Within The Financial Value Of Agreement Against This Tender.

BOQ

Sl. No. Item TitleItem Description
1The work of erection of 11 KV Lines for construction of independence feeder for electrification of CWR Vill. Amlikaur-Kakra Dera and Sonrahi (Tidwari) of Jal Jivan Mishan under FULL DEPOSIT SCHEME 2026-27 under EDD, BANDA (Rural), including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Various type petty materials/work, which are not mentioned in scope of work, but actual required has to be arranged by contractor at his own cost. No extra payment will be made to such petty requirement. The material supplied by contractor should be the best quality and as per standard/RESSPO norms, including transportation, if any. All steel material supplied by firm have to Galavanised, Details of the work as given below :-The work of erection of 11 KV Lines for construction of independence feeder for electrification of CWR Vill. Amlikaur-Kakra Dera and Sonrahi (Tidwari) of Jal Jivan Mishan under FULL DEPOSIT SCHEME 2026-27 under EDD, BANDA (Rural), including carriage of all required material from E.S.C., BANDA to work site, alongwith its loading, unloading & dragging at the respective ends and also carriage of old/damaged scraped material/TFs from site to store centre, if any. All works like erection, fixing, installation, laying & grouting etc. shall be done by firm as per direction of Engineer incharge/RESSPO manual. During the erection of lines/poles has to be done including cartage. Various type petty materials/work, which are not mentioned in scope of work, but actual required has to be arranged by contractor at his own cost. No extra payment will be made to such petty requirement. The material supplied by contractor should be the best quality and as per standard/RESSPO norms, including transportation, if any. All steel material supplied by firm have to Galavanised, Details of the work as given below :-
2Supply of following materials including loading, unloading at site :-Supply of following materials including loading, unloading at site :-
3STP Pole 11 Mtr. LongSTP Pole 11 Mtr. Long
4Control Cable 4x2.5 Sq.mm.Control Cable 4x2.5 Sq.mm.
511 KV XLPE Cable 3x185 Sq.mm.11 KV XLPE Cable 3x185 Sq.mm.
611 KV XLPE Cable 3x120 Sq.mm.11 KV XLPE Cable 3x120 Sq.mm.
7Guarding Angle with clamp & Nut-boltsGuarding Angle with clamp & Nut-bolts
8GI Wire 6 SWGGI Wire 6 SWG
911 KV Pin Insulator with pin and nut11 KV Pin Insulator with pin and nut
1011 KV Disc Insulator with fitting11 KV Disc Insulator with fitting
11Stay Set Complete (Stay Rod 16x1800 mm, Stay Wire 5 Kg., Stay Clamp, Bolt-Nuts etc).Stay Set Complete (Stay Rod 16x1800 mm, Stay Wire 5 Kg., Stay Clamp, Bolt-Nuts etc).
12Earthing Complete (Earthing Rod of 20x2500 mm & 6 SWG earthing wire etc.)Earthing Complete (Earthing Rod of 20x2500 mm & 6 SWG earthing wire etc.)
13Top Channel with Clamp & nut-boltsTop Channel with Clamp & nut-bolts
14MS Angle Cross Bracing with clamps and Nut-Bolts, washersMS Angle Cross Bracing with clamps and Nut-Bolts, washers
1511 KV VCB Incoming CTR 600/300/5A11 KV VCB Incoming CTR 600/300/5A
1611 KV VCB Outgoing CTR 200/100/5A11 KV VCB Outgoing CTR 200/100/5A
1711 KV V-Type Steel X-arm11 KV V-Type Steel X-arm
1811 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x185 Sq.mm.11 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x185 Sq.mm.
1911 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x120 Sq.mm.11 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x120 Sq.mm.
2011 KV Pilfer Resistant Metering Cubicle11 KV Pilfer Resistant Metering Cubicle
21Stone PadStone Pad
22X-arm Holding clamp with Nut-Bolts & washers for STPX-arm Holding clamp with Nut-Bolts & washers for STP
23X-arm Holding clamp with Nut-Bolts & washers for PCC PoleX-arm Holding clamp with Nut-Bolts & washers for PCC Pole
2411 KV F-Bracket with Nut-Bolts & washers11 KV F-Bracket with Nut-Bolts & washers
25Alluminium TapeAlluminium Tape
26Alluminium Binding WireAlluminium Binding Wire
27Jointing Sleeves for ACSR WeaselJointing Sleeves for ACSR Weasel
28Danger Board with Clamp & Nut-BoltsDanger Board with Clamp & Nut-Bolts
29Barbed WireBarbed Wire
30Number Plate with clampNumber Plate with clamp
31PG ClampPG Clamp
32The work of erection/installation/fixing of following :-The work of erection/installation/fixing of following :-
33Safe carriage of following material from electricity store centre to pit site of work through the Kachcha and pakka road, including loading and unloading at the respective ends including the cost of arrangement of labour, T&P etc. which required for proper completion of work (Distance 00-50 Kms.)Safe carriage of following material from electricity store centre to pit site of work through the Kachcha and pakka road, including loading and unloading at the respective ends including the cost of arrangement of labour, T&P etc. which required for proper completion of work (Distance 00-50 Kms.)
34ACSR Rabbit/Weasel/Dog ConductorACSR Rabbit/Weasel/Dog Conductor
35PCC Pole 8.5 Mtr. LongPCC Pole 8.5 Mtr. Long
36Erection of following poles with grouting including cutting of kharanja/mettalic road/concrete portion while digging pit & compete HT/LT fittings as per direction of Engineer incharge/RESSPO manual including the cost of labour, T&P and carrier etc. required for proper completion of work.Erection of following poles with grouting including cutting of kharanja/mettalic road/concrete portion while digging pit & compete HT/LT fittings as per direction of Engineer incharge/RESSPO manual including the cost of labour, T&P and carrier etc. required for proper completion of work.
37PCC Pole 8.5 Mtr. LongPCC Pole 8.5 Mtr. Long
38STP Pole 11 Mtr. LongSTP Pole 11 Mtr. Long
39Fixing/erection of following items, cost of labour, material and T&P which required for completion of work :-Fixing/erection of following items, cost of labour, material and T&P which required for completion of work :-
40Stone PadStone Pad
41X-arm Holding clamp with Nut-Bolts & washers for STPX-arm Holding clamp with Nut-Bolts & washers for STP
42X-arm Holding clamp with Nut-Bolts & washers for PCC PoleX-arm Holding clamp with Nut-Bolts & washers for PCC Pole
4311 KV F-Bracket with Nut-Bolts & washers11 KV F-Bracket with Nut-Bolts & washers
44Alluminium TapeAlluminium Tape
45Alluminium Binding WireAlluminium Binding Wire
46Jointing Sleeves for ACSR WeaselJointing Sleeves for ACSR Weasel
47Danger Board with Clamp & Nut-BoltsDanger Board with Clamp & Nut-Bolts
48Barbed WireBarbed Wire
49Number Plate with clampNumber Plate with clamp
50PG ClampPG Clamp
5111 KV Pin Insulator with pin and nut11 KV Pin Insulator with pin and nut
5211 KV Disc Insulator with fitting11 KV Disc Insulator with fitting
53Top Channel with Clamp & nut-boltsTop Channel with Clamp & nut-bolts
5411 KV V-Type Steel X-arm11 KV V-Type Steel X-arm
5511 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x185 Sq.mm.11 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x185 Sq.mm.
5611 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x120 Sq.mm.11 KV Cable Jointing Kit suitable for 11 KV XLPE Cable 3x120 Sq.mm.
5711 KV Pilfer Resistant Metering Cubicle11 KV Pilfer Resistant Metering Cubicle
58MS Angle Cross Bracing with clamps and Nut-Bolts, washersMS Angle Cross Bracing with clamps and Nut-Bolts, washers
59Erection and grouting of stay set complete including the work of nozelling etc. as per RESSPO manual. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor as his own cost.Erection and grouting of stay set complete including the work of nozelling etc. as per RESSPO manual. Grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor as his own cost.
60Fixing of earthing rod complete as per direction of supervising engineer/RESSPO manual. including the cost of labour, T&P etc. required for proper completion of work.Fixing of earthing rod complete as per direction of supervising engineer/RESSPO manual. including the cost of labour, T&P etc. required for proper completion of work.
61Laying, sagging, stringing, binding and jumpering of following conductor/cable on the erected poles in 33 KV/11 KV HT/LT lines as per direction of supervising engineer/RESSPO manual. including the cost of labour, T&P etc. required for proper completion of work.Laying, sagging, stringing, binding and jumpering of following conductor/cable on the erected poles in 33 KV/11 KV HT/LT lines as per direction of supervising engineer/RESSPO manual. including the cost of labour, T&P etc. required for proper completion of work.
62ACSR Rabbit/Weasel/Dog ConductorACSR Rabbit/Weasel/Dog Conductor
63Control Cable 4x2.5 Sq.mm.Control Cable 4x2.5 Sq.mm.
6411 KV XLPE Cable 3x185 Sq.mm.11 KV XLPE Cable 3x185 Sq.mm.
6511 KV XLPE Cable 3x120 Sq.mm.11 KV XLPE Cable 3x120 Sq.mm.
66Installation of 11 KV VCB Incoming CTR 600/300/5A as per RESSPO manual and as per direction of supervising engineer.Installation of 11 KV VCB Incoming CTR 600/300/5A as per RESSPO manual and as per direction of supervising engineer.
67Installation of 11 KV VCB Outgoing CTR 200/100/5A as per RESSPO manual and as per direction of supervising engineer.Installation of 11 KV VCB Outgoing CTR 200/100/5A as per RESSPO manual and as per direction of supervising engineer.
68Re-guarding/guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parellel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (Tillis) of GI wire at distance of 3 Mtr.Re-guarding/guarding of 11 KV line by laying, stringing, sagging and binding of 2 Nos. parellel GI wire 6 SWG after providing, fabrication and fixing of guarding angle and fabrication and fixing of x-guards (Tillis) of GI wire at distance of 3 Mtr.
69Note: Any quantity of item from sl no. 1 to sl no. 2.33 may vary to any limit within the financial value of agreement against this tender.Note: Any quantity of item from sl no. 1 to sl no. 2.33 may vary to any limit within the financial value of agreement against this tender.

AI Tender Summary

OUR REF NO 58376719
AUTHORITY Government Departments
TENDER VALUE 61.20 Lakhs
LAST DATE 16-11-2026
Authority
Authority Name Uttar Pradesh Power Corporation Limited
Work Description Bids Are invited for Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Commercial; Electrical System Or Installation, The Work Of Erection Of 11 Kv Lines For Construction Of Independence Feeder For Electrification Of Cwr Vill Amlikaur-Kakra.. - The Work Of Erection Of 11 Kv Lines For Construction Of Independence Feeder For Electrification Of Cwr Vill. Amlikaur-Kakra Dera And Sonrahi (Tidwari) Of Jal Jivan Mishan Under Full Deposit Scheme 2026-27 Under Edd, Banda (Rural), Including Carriage Of All Required Material From E.S.C., Banda To Work Site, Alongwith Its Loading, Unloading & Dragging At The Respective Ends And Also Carriage Of Old/Damaged Scraped Material/Tfs From Site To Store Centre, If Any. All Works Like Erection, Fixing, Installation, Laying & Grouting Etc. Shall Be Done By Firm As Per Direction Of Engineer Incharge/Resspo Manual. During The Erection Of Lines/Poles Has To Be Done Including Cartage. Various Type Petty Materials/Work, Which Are Not Mentioned In Scope Of Work, But Actual Required Has To Be Arranged By Contractor At His Own Cost. No Extra Payment Will Be Made To Such Petty Requirement. The Material Supplied By Contractor Should Be The Best Quality And As Per Standard/Resspo Norms, Including Transportation, If Any. All Steel Material Supplied By Firm Have To Galavanised, Details Of The Work As Given Below :- , Supply Of Following Materials Including Loading, Unloading At Site :- , Stp Pole 11 Mtr. Long , Control Cable 4X2.5 Sq.Mm. , 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Xlpe Cable 3X120 Sq.Mm. , Guarding Angle With Clamp & Nut-Bolts , Gi Wire 6 Swg , 11 Kv Pin Insulator With Pin And Nut , 11 Kv Disc Insulator With Fitting , Stay Set Complete (Stay Rod 16X1800 Mm, Stay Wire 5 Kg., Stay Clamp, Bolt-Nuts Etc). , Earthing Complete (Earthing Rod Of 20X2500 Mm & 6 Swg Earthing Wire Etc.) , Top Channel With Clamp & Nut-Bolts , Ms Angle Cross Bracing With Clamps And Nut-Bolts, Washers , 11 Kv Vcb Incoming Ctr 600/300/5A , 11 Kv Vcb Outgoing Ctr 200/100/5A , 11 Kv V-Type Steel X-Arm , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X120 Sq.Mm. , 11 Kv Pilfer Resistant Metering Cubicle , Stone Pad , X-Arm Holding Clamp With Nut-Bolts & Washers For Stp , X-Arm Holding Clamp With Nut-Bolts & Washers For Pcc Pole , 11 Kv F-Bracket With Nut-Bolts & Washers , Alluminium Tape , Alluminium Binding Wire , Jointing Sleeves For Acsr Weasel , Danger Board With Clamp & Nut-Bolts , Barbed Wire , Number Plate With Clamp , Pg Clamp , The Work Of Erection/Installation/Fixing Of Following :- , Safe Carriage Of Following Material From Electricity Store Centre To Pit Site Of Work Through The Kachcha And Pakka Road, Including Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P Etc. Which Required For Proper Completion Of Work (Distance 00-50 Kms.) , Acsr Rabbit/Weasel/Dog Conductor , Pcc Pole 8.5 Mtr. Long , Erection Of Following Poles With Grouting Including Cutting Of Kharanja/Mettalic Road/Concrete Portion While Digging Pit & Compete Ht/Lt Fittings As Per Direction Of Engineer Incharge/Resspo Manual Including The Cost Of Labour, T&P And Carrier Etc. Required For Proper Completion Of Work. , Pcc Pole 8.5 Mtr. Long , Stp Pole 11 Mtr. Long , Fixing/Erection Of Following Items, Cost Of Labour, Material And T&P Which Required For Completion Of Work :- , Stone Pad , X-Arm Holding Clamp With Nut-Bolts & Washers For Stp , X-Arm Holding Clamp With Nut-Bolts & Washers For Pcc Pole , 11 Kv F-Bracket With Nut-Bolts & Washers , Alluminium Tape , Alluminium Binding Wire , Jointing Sleeves For Acsr Weasel , Danger Board With Clamp & Nut-Bolts , Barbed Wire , Number Plate With Clamp , Pg Clamp , 11 Kv Pin Insulator With Pin And Nut , 11 Kv Disc Insulator With Fitting , Top Channel With Clamp & Nut-Bolts , 11 Kv V-Type Steel X-Arm , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Cable Jointing Kit Suitable For 11 Kv Xlpe Cable 3X120 Sq.Mm. , 11 Kv Pilfer Resistant Metering Cubicle , Ms Angle Cross Bracing With Clamps And Nut-Bolts, Washers , Erection And Grouting Of Stay Set Complete Including The Work Of Nozelling Etc. As Per Resspo Manual. Grouting Material I.E. Cement, Sand, Brick Ballast/Stone Ballast Etc. Shall Be Arranged By The Contractor As His Own Cost. , Fixing Of Earthing Rod Complete As Per Direction Of Supervising Engineer/Resspo Manual. Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. , Laying, Sagging, Stringing, Binding And Jumpering Of Following Conductor/Cable On The Erected Poles In 33 Kv/11 Kv Ht/Lt Lines As Per Direction Of Supervising Engineer/Resspo Manual. Including The Cost Of Labour, T&P Etc. Required For Proper Completion Of Work. , Acsr Rabbit/Weasel/Dog Conductor , Control Cable 4X2.5 Sq.Mm. , 11 Kv Xlpe Cable 3X185 Sq.Mm. , 11 Kv Xlpe Cable 3X120 Sq.Mm. , Installation Of 11 Kv Vcb Incoming Ctr 600/300/5A As Per Resspo Manual And As Per Direction Of Supervising Engineer. , Installation Of 11 Kv Vcb Outgoing Ctr 200/100/5A As Per Resspo Manual And As Per Direction Of Supervising Engineer. , Re-Guarding/Guarding Of 11 Kv Line By Laying, Stringing, Sagging And Binding Of 2 Nos. Parellel Gi Wire 6 Swg After Providing, Fabrication And Fixing Of Guarding Angle And Fabrication And Fixing Of X-Guards (Tillis) Of Gi Wire At Distance Of 3 Mtr. , Note: Any Quantity Of Item From Sl No. 1 To Sl No. 2.33 May Vary To Any Limit Within The Financial Value Of Agreement Against This Tender.
Basic Detail
Tender No GEM/2026/B/8241771
Bidding Type Tender
Location
City Banda
State Uttar Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 16 Nov 2026
Open Date 17 Nov 2026
Finance
Tender Value 61.20 Lakhs
Tender Fee Ref. Documents
EMD Ref. Documents
Exemption Not Available
Document List
0d39739f-c08e-4d2a-89c5-b87bb4acc24b.pdf
1793797490.xlsx
1793797529.pdf
1793797533.pdf
1793797536.pdf
1793797539.pdf
ATC64_aba676db-4789-46dc-bc591793797705685_EDCBANDABUYER.pdf
SoW64_894095db-9865-4951-86e41793797718205_EDCBANDABUYER.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 6 days
Nov 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
pdf

0d39739f-c08e-4d2a-89c5-b87bb4acc24b.pdf

xlsx

1793797490.xlsx

pdf

1793797529.pdf

pdf

1793797533.pdf

pdf

1793797536.pdf

pdf

1793797539.pdf

pdf

ATC64_aba676db-4789-46dc-bc591793797705685_EDCBANDABUYER.pdf

pdf

SoW64_894095db-9865-4951-86e41793797718205_EDCBANDABUYER.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender