Tender For General-Annual Maintenance 2026-27-Urgent Repair Works Of Pvc Pipes And Canals In Various Li Schemes In Kadukutty, Koratty And Annamanada Panchayath 2026-27-General Civil Work
Tender Value
10.16 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
7 days left
EMD
25422
Bank guarantee accepted
Document Fee
2760
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Annual Maintenance 2026-27-Urgent Repair Works Of Pvc Pipes And Canals In Various Li Schemes In Kadukutty, Koratty And Annamanada Panchayath 2026-27-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Rectification |
| 2 | 2.10.1.2:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia |
| 3 | 2.10.1.3:Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil. and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m:All kinds of soilPipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm |
| 4 | OD12029/2026-2027:Supplying and laying jointing 315mm dia PVC pipe 6kg/cm2 with line and level inalready excavated trenches etc. |
| 5 | OD12032/2026-2027:Supplying and fixing 315mm CIR joint suitable connected with 315mm dia PVC pipe includingcutting placing accuracy etc complete |
| 6 | OD12040/2026-2027:Supplying and laying joining ISI Marked best quality250 mm dia PVC pipes ( 6Kg/cm2)including specials such as bent, elbow , tees and reducers (6 Kg/ Cm2) as per site conditionincluding cost taxes and conveyance of all marterals , labour charges and all other incidentalcharges etc. complete as per directed by departmental officers at site ( preliminary pressure testfor PVC pipes supplied should be done in the approved laboratory at contractors own expense) |
| 7 | OD12042/2026-2027:Supplying and fixing 250mm CIR joint suitably connected with 250mm PVC pipe includingcutting and placing in accuracy etc complete |
| 8 | OD12043/2026-2027:Supplying and laying jointing 200mm dia pvc pipe 6kg /cm2 pressur with line and level inalready excavated trenches etc complete |
| 9 | OD12052/2026-2027:Supplying and fixing 200mm CIR joint suitable connected with 200mm pvc pipe includingcutting and placing in accuracy etc complete |
| 10 | OD12054/2026-2027:Supplying and laying joining ISI Marked best quality 160 mm dia PVC pipes ( 6 Kg/ cm 2)including specials such as bent, elbow and tees etc.as per site condition including cost taxes andconveyance of all materials, labour charges etc. complete as directed by the departmentalofficers at site ( preliminary pressure test for PVC pipe supplied at site should be done in theapproved laboratory at contractors own expense) |
| 11 | OD12053/2026-2027:Supplying and fixing 160 mm CIR joints suitable connected with 160 mm dia PVC pipeincluding cutting placing with accurate etc complete |
| 12 | 50.18.9.9.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2 |
| 13 | OD12101/2026-2027:Supplying and fixing ISI marked best quality 110mm dia PVC ball valve with necessary fittings including cost & conveyanceof all materials and labour charges for fixing and all other incidental charges etc.complete as directed by the departmental officers at site |
| 14 | 2.33.3:Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 120 cm girth up to and including 240 cm girth |
| 15 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 16 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared |
| 17 | 2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil |
| 18 | 15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 or leaner mix ( including equivalent design mix) |
| 19 | 60.7.8:DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site |
| 20 | 60.7.3:DISMANTLING DR - Dismanling , clearing away and carefully stacking materials useful for reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150m. |
| 21 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 22 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 23 | 4.1.6:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 24 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 25 | 60.7.1:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site |
| 26 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 27 | 60.2.5:BAILING OUT WATER USING PUMP ABOVE 20HP AND UP TO 30HP -Bailing out water with engine and pump set above 25HP and up to 30HP, including conveyance to site and errection,cost of fuel, lubrication oil and other stores, pay of staff etc complete |
| 28 | 60.1.2:RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work.etc.complete. |
| 29 | 13.71:Lettering with black Japan pint of approved brand and manufacture Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender