Tender For Certain Repairs To Sunken Portion, Flooring,Plastering,Jinery, Sanitary Fittings, Periodicals And Internal Water Supply Inc Misc Repair Works To Md Acc In Wapti Area At Afssr Gurgaon / Certain Repairs To Plinth Protection, Sunken And Plast
Tender Value
46.50 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
21 days left
EMD
93000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurgaon → Haryana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Sunken Portion, Flooring,Plastering,Jinery, Sanitary Fittings, Periodicals And Internal Water Supply Inc Misc Repair Works To Md Acc In Wapti Area At Afssr Gurgaon / Certain Repairs To Plinth Protection, Sunken And Plastering In Gurugram Bhag And Adjoining Area Of Afssr Gurgaon Under Ge (Af) Gurgaon
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster of any description on brick walls, etc including raking out joints, hacking for key scrubbing down with water etc. |
| 2 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces on walls in CM 1:4. finishing even and smooth without using extra cement complete all as specified and directed.Note:- Area includes in this items upto 4 stories of building. |
| 3 | M&L for rendering 15 mm thick on brick work or concrete surfaces on walls in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L Rough Cast Plaster on Brick Walls consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed of size 6mm with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed. |
| 6 | M&L preparing newly Rough Cast plastered surfaces of Walls and applying Two Coats of acrylic Weather Coat Exterior Paint with approved Tint over a coat of Primer (as per Manufacturer's instructions), complete all as specified and as directed. |
| 7 | M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia / Roof projection over 20mm thick in CM 1:4 as doubing coat including cleaning of old wornout concrete,taking down plaster & applying a coat of RBR compund for proper bond of old and new concrete surface etc complete all as specified and as directed Notes : The Area includes in this items up to 4 th stories building. |
| 8 | M&L for preparation of newly plastered surface of wall,chajjas,facia and applying two coat of exterior weather proof paint over a coat of primer etc complete all as specified and directed.Note : the area includes in this items upto 4th storied building. |
| 9 | M&L for three coats of white wash on New plaster surface of ceiling including prepration of surface. |
| 10 | M&L for One coats of white wash on old plaster surface of ceiling including prepration of surface. |
| 11 | M&L for preparing new plastered surface of walls and applying two coat of oil bond distemper white or any tint over a coat of primer etc complete as specified and directed |
| 12 | M&L for preparing Old plastered surface of walls and applying two coat of oil bound distemper white or any tint etc after preparing the surface of walls scraping down smoke soot,moulds,moss and eflore scent salts : rubbing down stopping of surfaces using sand paper complete as specified and directed |
| 13 | M&L for preparing Old plastered surface of walls and applying one coat of oil bound distemper white or any tint etc after preparing the surface of walls scraping down smoke soot,moulds,moss and eflore scent salts : rubbing down stopping of surfaces using sand paper complete as specified and directed |
| 14 | M&L for 1mm thick birla white putty and making the surface smooth etc complete as specified and directed |
| 15 | M&L for completely removal of the existing treatment from wall,chajjas,facia and preparing plaster surface of wall and applying two coat of exterior weather proof paint overr a coat of primer etc complete all as specified and directed.Note : the area includes in this items upto 4th storied building. |
| 16 | Taking down Chowkats or frames from the opening of size not exceeding 1.5 sqm each with shutters ( without taking off shutters from the frames) incl cutting of frame with cutter and make good of disturb surface complete all as specified and directed by Engr-in-Charge. |
| 17 | Taking down Chowkats or frames from the opening of size exceeding 1.5 Sqmtr but not exceeding 4 Sqmtr each with shutters ( without taking off shutters from the frames) incl cutting of frame with cutter and make good of disturb surface complete all as specified and directed by Engr-in-Charge. |
| 18 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete all as specified and directed |
| 19 | Taking down Shutters of any description of size exceeding 1 sqm and not exceeding 2 sqm each complete and refixing in the same opening after easing and adjustment all as specified and directed |
| 20 | S&F pressed steel frames 1.25mm thick for door size of frame 105 X 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 21 | S&F pressed steel frames 1.25mm thick for door size of frame125 X 60mm with double rebates including necessary fixing lugs, hinges, lock strike plate and filling of chowkats with PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) and for filling of hold fast and tarring to inner surface (surface in contact with concrete/brick surface) of chowkats and hinges and two coats of synthetic enamel paint to outer surface with red oxide primer after prepration of surfaces complete all as specified and directed. |
| 22 | S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm PVC sheet reinforced with MS Squre Tube in opening etc PVC sheet should be wood grain printed/plain as approved by Engr-in-charge complete all as specified and as directed. |
| 23 | S&F Factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including rawl plugs etc in the frame at site as per specification & drawing etc complete all as specified as directed. |
| 24 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 25 | S&F IInd class hard wood Glazed and skeleton shutters 35mm thick divided into square, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a) ; supplied and fitted to chowkats complete all as specified and directed |
| 26 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 27 | M&L for preparation of new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed |
| 28 | Demolition reinforced cement concrete in roofs, floors (other than ground floors), beams staircases, landing, chajjas, Shelves and similar suspended work (reinforcement cut as required to facilitate demolition) |
| 29 | M&L for reinforced Cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregates) as in roofs, chajjas,Shelves, beams complete all as specified and directed. |
| 30 | Use and waste of form work to Chullah hoods, chajjas, shelves, weather shades,suspended slabs, corbels, water troughs and similar items including edges rough finished surfaces of concrete complete all as specified and directed |
| 31 | S&F mild steel TMT bars 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire ( annealed) not less than 0.90 mm dia. Or securing with clips complete all as specified and directed |
| 32 | S&F repair rotational moulded polythene, triple layers, water storage tank 500 Ltr capacity, closed top, cylindrical, hoisted and fixed in position incl Dismantling water tanks Exc 250 Ltr & not exceeding 500Ltr. |
| 33 | S&F in repairs 15/20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. |
| 34 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore complete all as specified and as directed |
| 35 | S&F in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 15 mm bore complete all as specified and as directed |
| 36 | S&F and testing galvanised steel tubing 15mm bore “medium grade” with all fittings complete fixed to wall surfaced/concelled incl Taking down or up steel tubing 15mm bore and connections and complete all as specified and directed |
| 37 | S&F and testing galvanised steel tubing 20mm bore “medium grade” with all fittings complete fixed to wall incl Taking down or up steel tubing 20mm bore and connections and complete all as specified and directed |
| 38 | Taking down or up galvanised steel tubing 20mm/15mm bore medium grade and connection and cleaning the same and refixing the same in the same position/other position with all new fittings complete fixed to walls/ceiling or laid in floors complete all as specified and directed |
| 39 | Hacking out old brocken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads and removal for site complete all as specified and directed by Engineer-in-Charge |
| 40 | S&F in repair 3mm thick Sheet glass, ordinary quality and glazing with oil putty or fixing in NCL windows / Box type windows with rubber beading in square n exc 0.5 sq.m. in each pane complete all as specified and directed by Engineer-in-Charge |
| 41 | M&L for completely removal of the existing treatment by wire brushing or sand paper or other scraping material as required from wall including prepration of surfaces complete as specified and directed. |
| 42 | M&L for preparation of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed |
| 43 | M&L two coats of synthetic enamel painting on old steel surfaces of any description over 10 cm in width or girth not otherwise described including prepration of surfaces |
| 44 | M&L for factory made powder coated anodised aluminium section for frame for door, window and ventilator complete all as specified. |
| 45 | M&L for factory made Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge |
| 46 | M&L for factory made powder coated Anodised aluminium grill of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer -in-charge. |
| 47 | S & F plain sheet glass 4.8 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.) |
| 48 | M&L for applying frosted glass film over window/ door glass as directed |
| 49 | M&L for cleaning and removing all scale and dirt etc from tank capacity 500 ltr and 1000 ltr and from mouths of circulating pipes, etc and write date of cleaning in format of DD.MM.YYYY on tank complete all as directed by Engr-in-Charge |
| 50 | Supply and fix Godrej pattern mild steel cup board with shutter made out of 1 mm thick M.S. sheet 60cm depth sides incl with back & 3 shelves & vertical partition & mild steel door shutter two leaves with frame, incl necessary fittings with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long. The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed. |
| 51 | S&F factory made PVC shutter in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work. The panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as directed by Engr-in-Charge. |
| 52 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed by Engineer-In- Charge. |
| 53 | S&F 30mm wide flaps continuous (Piano) hinges mild steel bright finish complete all as specified and directed by Engineer-In- Charge. |
| 54 | S&F 40 mm dia cup boards knobs fixed with nut , screw and washer of mild steel , bright finished Complete all as specified and directed. |
| 55 | S&F Mild steel sliding door bolts 300mm long with hasp, staple (bolt type) , stove enameled black with bolt not less than 12mm dia with and including a minimum of 6 bolt and nut complete |
| 56 | S&F Mild steel barrel tower bolts, 150mm size, stove enamelled black, with bolt complete all as specified and directed |
| 57 | S&F aluminium anodised barrel tower bolt of extruded section 200mm size, stove enamelled black, with bolt complete all as specified and directed |
| 58 | S&F 150mm long mild steel pressed handle, oval type, stove enamelled complete all as specified and directed |
| 59 | S&F Aluminium handles, 150mm size cast type anodised complete all as specified and directed |
| 60 | S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm. |
| 61 | S&F stainless steel 75 mm long butt hinges complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F Butt Hinges, 100mm size, medium weight, cold rolled mild steel complete all as specified and directed |
| 63 | S&F 300mm long ordinary rat tail rod pattern spring, including roller and roller plate. |
| 64 | Dismantling of stone slabs and tiles of any description or thickness in floors, approachs, dado/Partitions etc complete all as specified and as directed |
| 65 | M&L for 16-18 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed |
| 66 | Dismantling of unserviceable floor, hearth or wall tiling incld cement mortar bedding (but not backing) and removal of rubbish/ debris from premises of MOD Land. |
| 67 | M&L for Non skid , ceramic coloured tiles 7 to 8 mm thick area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set and jounted neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 68 | M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size exc 0.06 sqm but not exc 0.11 sqm mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 69 | M&L for Non-skid tiles ceramic coloured tiles 7 to 8 mm thick of size exc 0.11 sqm but not exc 0.18 sqm mm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) complete all as specified and as directed. |
| 70 | M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete wall surface as backing coat of dado/skirting etc complete all as specified and as directed |
| 71 | M&L for Glazed ceramic tiles coloured 300mmx 450mm, 6 to 7 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match etc on vertical surfaces such as skirting , dados and risers to steps etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match etc complete all as specified and directed. |
| 72 | M&L for 75 mm thick cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate in sub base all as specified & directed by Engr -in charge |
| 73 | M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick ( as approved by GE) set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc laid over including 15 mm thick cement screed bed in CM 1:6 . complete all as specifed and as directed |
| 74 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf walls , or including fixing cantilever brackets and connecting union to waste pipe overall size 915mmx 460mm bowl size 400mmX 330mm X140mm including waste coupling and waste pipe complete all as specified and as directed by Engr-in-charge. |
| 75 | S&F Vitreous China White Wash Down Water Closet Pan (Pedestal Pattern)/Anglo Indian type size 580X400mm with seat cover , Trap and Fixing Bolts and Making Good to Floor/ distrubed surfaces including dismatling of exixting pan, including one 01 Grating for to remove water complete all as specified and as directed. |
| 76 | Supply only 10 Ltr capacity PVC valveless symphonic action type flushing cistern white low level with ball valve float, handle including bracket complete all as specified and directed with glaged finish. |
| 77 | Supply only Flush pipe of polythylene of low or high density or PVC,32mm dia for low level cistern. |
| 78 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm. |
| 79 | S&F in repair 600mm x 450mm mirror of selected quality glass, with CP Brass screws and cup washers with aluminium beading all around complete all as specified and directed |
| 80 | S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 81 | S&F in repair chromium plated shower roses 125 mm with or without swivel joints,any size including fixing to steel pipe or union for 15mm bore of pipe complete all as specified and directed. |
| 82 | Dismantling of brickwork, built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed |
| 83 | M&L for brick work with sub class \\"B\\" bricks (old size) straight or curved on plan exc 6 m mean radius, built in CM 1:6 complete all as specified and directed |
| 84 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm dia bore dia pipe complete all as specified and as directed |
| 85 | S&F in repair Stop valves, cast copper alloy, screwed down , high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions, fancy type, chromium plated with long shank and cup ( concealed type) and fixed 15 mm dia bore dia pipe complete all as specified and as directed. |
| 86 | S&F in repair Bib taps, cast copper alloy chromium plated, fancy type with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed for 15 mm dia bore dia pipe complete all as specified and as directed. |
| 87 | S&F in repairs Brass Chromium Plated Central Hole basin Mixture 15mm bore (dia) without Popup Waste System with 450mm long provided Hoses including Flange suitable for Wash Hand Basin and fixing-in-repairs, complete all as specified and as directed. |
| 88 | S& F in repair Fancy type Pillar taps, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed comp all as specified and directed |
| 89 | S&F in repair brass chromium plated wall mixer with provision for over head shower with115 mm long bend pipe all as specified and as directed |
| 90 | S&F in repair vitreous China wash basin white, flat back size 550x400mm including S&F 32mm dia waste coupling, waste PVC pipe complete all as specified and as directed. |
| 91 | S & F for 75 mm bore out let cast floor trap with gratings including jointing to waste pipe fixed in cement concrete type (B-1) 1:2:4 etc complete all as specified and directed by Engineer-in Charge |
| 92 | S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and directed by Engineer-in-Charge |
| 93 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 600mm X750mm X200mm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed |
| 94 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening FE-410-W Gde (E-250 quality) and fixing complete all as specified and as directed |
| 95 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore including stainless steel finale & bracket etc complete all as specified and as directed |
| 96 | Taking down cast iron soil waste and vent pipes of any description with fitting and making good to disterbed surfaces. |
| 97 | S & F for 100 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge |
| 98 | S & F for 75 mm bore cast iron soil, waste and vent pipes,(sand cast pipes) in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls with GI stack clamps complete all as specified and directed by Engineer-in-Charge |
| 99 | S & F for 100 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge |
| 100 | S & F for 100 mm bore cast iron branch piece, \\"T\\" , single (equal or unequal) ordinay or inverted (spigot or socket type ) or with parallel branches complete all as specified and directed by Engineer-in-Charge |
| 101 | S & F 75 mm bore cast iron T including jointing and laid in trenches complete all as specified and directed by Engineer-in-Charge |
| 102 | S & F for 75 mm bore cast iron bends of (any radius), dimnishing piecs or taper (larger bore measured) fitted with oval access door complete all as specified and directed by Engineer-in-Charge |
| 103 | Taking down PVC (SWR) pipes of any description with fitting and making good to disterbed surfaces. |
| 104 | S&F in repairs 75mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade with rubber ring joints fixed to walls with GI stack clamp dash true nut and bolt complete all as specified and directed by Engineer-in-charge. |
| 105 | S&F in repair 75mm bore PVC (SWR) bends any radius complete all as specified and directed by Engineer-in-charge. |
| 106 | S&F in repair 75mm bore PVC (SWR) Junction single,(single Y/T) equal or unequal complete all as specified and directed by Engineer-in-charge. |
| 107 | S&F in repairs 110mm bore PVC(SWR) pipes single socketed in any length pressure rating 4Kg/Sq cm medium Grade fixed to walls with dash through nut and bolt at every 2mtr length including) including all fittings complete all as specified and directed by Engineer-in-charge. |
| 108 | S&F 110mm bore PVC (SWR) bends any radius With access door complete all as specified and directed by Engineer-in-charge. |
| 109 | M&L Non-asbestos Fiber Cement Building Boards 6.0mm thick, fixed to Walls with Rawl Plugs and Steel Screws, complete all as specified and as directed. |
| 110 | Demoliation of PCC / sub base in sunken / toilet floor area and removing all WCs/WHB or other fittings carefully and keep it safe till refixing complete all as spd and directed. |
| 111 | S&F 50mm dia bore GI Pipe 450mm long (light grade) projecting 150mm from outer face of wall and the slope of sunken slab as spouts to drain out accumulated water complete all as spd and directed by Engr-in-Charege |
| 112 | M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed Please Enable Macros to View BoQ information |
| 113 | M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed Brick aggregates as in sunken portion of WC etc complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender