Tender For Repair To Mes Installation And Misc Works In Domestic Area Afs Tezpur
Tender Value
43 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
19 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonitpur → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Mes Installation And Misc Works In Domestic Area Afs Tezpur
BOQ
| Sl. No. | Item Description |
| 1 | M&L for Collecting and taking out soil/Silt and mud deposited from drains, channels and culvert beds & removing to a distance n exc 250 m and depositing in low lying area where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 2 | M&L for brick work with locally available best quality sub class \\"B\\" old size bricks straight or curved on plan exceeding 6m mean radius with old size bricks locally available built in cement mortar 1:4 as in Manhole,wall , to confined spaces as in foothpath etc complete including demolition of old brick work built in cement mortar complete. |
| 3 | Material and labour for bricks, sub class B, laid flat, as in drain, old size bricks, jointed in cement mortar (1:6) and pointed in cement mortar (1:3) after dismantling of Bricks (laid flat in floors, channels, kerbs, aprons, etc. (each layer complete all as specified and as directed. |
| 4 | Material and labour for bricks, sub class B, laid on edge in floors, old size bricks, jointed in cement mortar (1:6) as drain and pointed in cement mortar (1:3) after dismantling of Bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs, aprons, etc. (each layer complete all as specified and as directed. complete all as specified and as directed. |
| 5 | M&L 15 mm thick cement plaster in CM (1:4) in two layers (5mm thick with approved water proofing compound over backing layer of 10 mm thick) on fair faces of brick work incl finished even and fair without using extra cement. (WPC @ 2% of cement, will be paid separately) including taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. all as specified and as dircted. |
| 6 | M&L for PCC type C-2 1:3:6 (using 40 mm graded stone aggregate) as in surface channel, drain, foundation after demolition of plain cement concrete unreinforced in ground and paving not exc 15 cm in thickness below or above ground level, complete all as specified and directed. |
| 7 | M/L for PCC Type B1 1:2:4 using 20mm graded stone aggregate as in coping & hounching for manhole after demolition of plain cement concrete unreinforced in ground and paving not exc 15 cm in thickness below or above ground level, complete all as specified and directed. |
| 8 | Racking out joints/ pointing to brick work in walls or to bricks on edge in floors, surface channels, built in cement mortar not less than 12mm deep washing the joints, removing rubbish, complete all as specified and as directed. |
| 9 | Material and labour for flush pointing to bricks on edge paving in cement mortar (1:4), complete all as specified and as directed. |
| 10 | Supply and fix in repairs vitreous china squatting pan of orissa pattern long pan size 580 mm x 440mm white back inlet and including provision of PCC or lime concrete bedding,100mm dia Vitreous china 'P' trap with long arm etc and removal of debris complete all as specified. |
| 11 | S&F in repair PVC (SWR) floor traps 75 mm plain with grating including jointing with solvent cement, complete all as specified and directed. |
| 12 | Supply and fix in repair plastic water closet seat cover, white, with mild steel chromium plated hinging device, complete all as specified and directed. |
| 13 | S&F 100 mm dia Cast iron soil, waste and vent Spun pipes in any length with or without ears, with cement joints, laid in trenches or in floors etc. including taking down old sewage pipes/rainwater pipes with fittings, complete all as specified and directed. |
| 14 | S&F 100 mm dia cast iron bend (any radius), complete all as specified and as directed. |
| 15 | S&F in repair PVC valveless syphonic action type Flushing cistern, 10 ltrs capacity with & including PVC Connection 15x450mm long, Flush pipe long/short, & fixing brackets on walls etc complete all as specified and directed. |
| 16 | Supply and fix in repairs 50 mm bore, high density polyethylene pipes (HDPE) of pressure rating 6 kg/cm2 including all fittnigs fixed to wall or floor with clamps for collecting waste from WHB and sinks, complete all as specified and as directed. |
| 17 | S&F in repair vitreous china wash down water closet pan (EWC), (Pedestal Pattern) white with & including pvc white color Seat cover fixed with Mild Steel CP hinging device, complete all as specified and as directed. |
| 18 | S & F in repair Health Faucet CP brass with 1m long Stainless steel connection pipe and fixed to stop cock/ angle cock complete all as specified and as directed. |
| 19 | S & F in repair Grating doom 100 mm dia PTMT with/without waste hole complete all as specified and directed. |
| 20 | Supply only bib tap 15mm PTMT with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 21 | Supply only Pillar Tap 15mm PTMT, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 22 | Supply only Stop Cock (F/T) /Angle cock 15mm PTMT screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. |
| 23 | Supply and fix in repair for 15mm stop valve/ angle valve chromium plated, cast copper alloy, screwed down, high pressure, with capstan head, screwed for iron pipes or brass ferrule, complete all as specified and as directed. |
| 24 | Supply and fix in repair PVC flush pipe 32mm dia, high density for high or low level flushing cistern, complete all as specified and directed. |
| 25 | Supply and fix in repair for 32mm dia X 1000mm PVC waste pipe for WHB including PTMT waste coupling, complete all as specified and as directed. |
| 26 | S&F in repair PVC connection 15x450mm long suitable, complete all as specified and as directed. |
| 27 | Refixing in repair 10 Ltr Capcity PVC flushing cistern after necessary repair work including connection to IWC/EWC and PVC connection, complete all as specified and as directed. |
| 28 | S&F in repair Vitreous China Wash Hand Basin, white, flat back, size 550x400mm with & including brackets, cutting for and pinning in ends of brackets or eracting stand & PVC waste pipe 800mm long with CP coupling, CP Pillar Tap15mm, PVC connection 15mmx450mm long etc and rubbish off the Stn premises, complete all as specified and directed. |
| 29 | S&F in repairs 32 mm dia waste coupling, brass chromium plated for WHB, etc with long screwed shanks and fly nuts, complete all as specified and as directed. |
| 30 | Taking up or down GI tubing 15mm bore pipe and connection including cleaning for refixing or removal from site, complete all as specified and directed. |
| 31 | Supply and fixing 15mm dia GI medium grade tubing with all fitting and fixed to wall ceiling or laid in floors, complete all as specified and as directed. |
| 32 | Refixing 15mm old steel tubing and connecting in new or old position (walls, ceiling, floors) etc, complete all as specified and directed. |
| 33 | Taking up or down GI tubing 20mm bore pipe and connection including cleaning for refixing or removal from site as directed |
| 34 | S&F 20mm bore medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 35 | Refixing 20mm old steel tubing and connecting in new or old position (walls, ceiling, floors) etc, complete all as specified and directed. |
| 36 | Taking up or down GI tubing 25mm bore pipe and connection including cleaning for refixing or removal from site, complete all as specified and directed. |
| 37 | S&F 25mm bore medium grade galvanised iron water tube with all fittings laid in floors fixed to wall etc complete all as specified and as directed. |
| 38 | Refixing 25mm old steel tubing and connecting in new or old position (walls, ceiling, floors) etc, complete all as specified and directed. |
| 39 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, jointed with solvent, fixed to walls etc including taking down old sewage pipes/rainwater pipes with fittings, complete all as specified and directed. |
| 40 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints jointed with solvent, fixed to walls etc including taking down old Sewage pipes/rainwater pipes and fittings, complete all as specified and directed. |
| 41 | S&F 110 mm dia PVC (SWR) junction single (Single T) equal or unequal with access door, complete all as specified and directed. |
| 42 | S & F in 110mm dia PVC (SWR) bends any radius with access door, complete all as specified and as directed. |
| 43 | S&F 110x75mm PVC (SWR) Reducer, complete all as specified and as directed. |
| 44 | S&F for 75 mm dia PVC (SWR) bend with ovel access door, complete all as specified and directed. |
| 45 | S&F for 75 mm dia PVC (SWR) junction (Single T) equal or unequal with access door, complete all as specified and directed. |
| 46 | S&F PVC (SWR) Vent Cowl 75mm dia, complete all as specified and directed. |
| 47 | Supply and fix for mild steel work such as bands, clamps, for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles, straps, ties etc. and similar works, fabrication for steel sections conforming to Fe-290 (Grade E-165) including necessary welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated complete all as specified and as directed. |
| 48 | Material and labour for coloured glazed ceramic tiles 450mm x 350 mmx 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering in CM (1:4) for fixing wall tiles after dismantling of old wall tiles including cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 49 | Material and labour for Non skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishes after dismantling of old floor tiles incluidng cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 50 | Material and labour for 20-25 mm kota Stone set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed or bedding layer in CM (1:6) for lying floor finishes after dismantling of old floor tiles incluidng cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 51 | Material and labour for 20-25 mm kota Stone set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed or bedding layer in CM (1:3) for wall,skirting finishes and Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete. after dismantling of old floor tiles incluidng cement mortar bedding and rubbish off the premises complete all as specified and as directed. |
| 52 | M&L for 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded aggregates as in path, hard standing, complete all as specified and directed. |
| 53 | M&L for sand cushoning under interlocking tiles, complete all as specified and as directed. |
| 54 | M&L for 75 mm thick plain cement concrete (1:3:6) type C2 using 40mm graded aggregates as in plinth protection, complete all as specified and directed. |
| 55 | M&L for machine pressed precast concrete interlocking paver blocks of any shape and size confroming to IS15658-2006 of 60mm thickness with grey cement and pigment, complete all as specified and directed. |
| 56 | M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment over and including Screed Bed or Bedding Layer 15 mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed. |
| 57 | S&F for steel work in tubular trusses including special shaped washer etc. Complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240, complete all as specified and directed. |
| 58 | S & F prepainted galvalume aluminium zinc coated GI based corrugated steel sheet 0.50 mm thickness of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screw including dismantling plain or corrugated steel sheeting, any gauge thickness, complete all as specified and as directed. |
| 59 | S & F prepainted galvalume aluminium zinc coated GI based plain Sheet sheet 0.50 mm thickness of an colour having tensile strength of 550 Mpa as in roof covering / clading to wall fixed with self tapping screw including dismantling plain or corrugated steel sheeting, any gauge thickness, complete all as specified and as directed. |
| 60 | Materials and Labour for anodised aluminium snap grid framework for false ceiling, size of grid 605 mm x 605 mm as per clause 10.38 of SSR Part-I (2009) including 6 mm thick, high pressure steam cured (HPSC) non asbestos fibre cement building boards fixed or laid to aluminium framework with screws and including dismantling existing wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness including cover fillets, complete all as specified and directed. |
| 61 | M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, complete all as specified and directed. |
| 62 | Taking down chowkhats or frame with shutter (without taking off shutters from the frame) n exc 1.5 sqm each, complete all as specified and directed. |
| 63 | S & F in repair factory made steel ventilators fixed type with glazing bars hinges with mild steel handle, and steel peg dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 (including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. |
| 64 | S & F in repair factory made steel windows with side hung shutters including projecting type hinges with mild steel handle, and steel peg stay complete without glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1( including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. |
| 65 | S & F in repair factory made steel windows with side hung shutters including projecting type hinges with mild steel handle, and steel peg stay complete with glazing bars dovetailed or welded and making good the disturbed wall surfaces in CM (1:2) or PCC (1:2:4) type B1 ( including necessary arrangements to fix the same in multy storey bldgs up to G+2), complete all as specified and as directed. ` |
| 66 | Material and labour for preparation of new steel or iron surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed. |
| 67 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door single rebated Frames/ Chowkhat of size 75 mm x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres and nontoxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant, complete all as specified and directed. |
| 68 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC Decorative finish of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed. |
| 69 | Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 and n exc 4 sqm complete all as directed. |
| 70 | Material and labour for PCC(1:3:6) type C1 (using 20mm graded stone aggregate) for fixing hold fast and backfilling in MS chowkhat, complete all as specified and as directed. |
| 71 | Taking down shutter of any description exc. 1.00 Sqm and n exc 2.00 Sqm each, complete all as specified and directed. |
| 72 | Supply and fix Factory made Pressed steel door frames 1.25mm thick (125x60mm wide) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 73 | Supply and fix Factory made Pressed door steel frames 1.25mm thick (105x60mm wide) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and as directed. |
| 74 | S & F 35 mm thick 2nd class hard wood Factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, section-8, cluse 8.24 (a), complete all as specified and as directed. |
| 75 | S & F Factory made 30 mm Flush shutters, solid core construction, with blockboard core and plywood face panels, commercial type on both sides as per IS:1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed. |
| 76 | M&L for preparation of new wooden surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 77 | S & F Mild Steel Butt hinges 125 mm long cold rolled medium weight, complete all as specified and as directed. |
| 78 | S & F 150mm long Aluminium anodised handles, cast type, complete all as specified and as directed. |
| 79 | S & F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed. |
| 80 | S&F 150 mm long Aluminium anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 81 | S & F in repairs Mild Steel Helical Door Spring 300mm long ordinary rat tail pettern inclduing roller and roller plate to be fixed to MS chowkhat with necessary welding work, complete all as specified and as directed. |
| 82 | S&F 150 mm Stainless steel hinges for PVC doors, fixed with SS screws, complete all as specified and as directed. |
| 83 | S & F 100mm long aluminium anodized barrel tower bolts of extruded section, fixed with SS screws, complete all as specified and as directed. |
| 84 | S & F 150 mm long aluminium anodised handles, cast type, anodised, fixed with SS screws, complete all as specified and as directed. |
| 85 | M & L in repair for 4 mm sheet glasse ordinary quality, in squares exc 0.5 sqm each pane for windows including necessary arrangements to fix the same in multy storey bldgs up to G+2, complete all as specified and as directed. |
| 86 | M & L for 3mm thick, sheet glass ordinary quality, glazing with oil putty in square n exe 0.5 Sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones at any height in multy story bldgs (G+2), complete all as specified and as directed. |
| 87 | Supply and fix in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm dia fixed with stainless steel wire staples or with wooden beading or any other fixing arrangements, complete all as specified and as directed. |
| 88 | Supply & Fix for mild steel framed work such as grills, gratings of sedimentation tank, SWTs, powerhouse, pump house installations etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165, complete all as specified and directed. |
| 89 | M&L for Cutting holes in brick walls exc half brick but n.exc in cement mortar for inserting holdfasts, exhaust fan and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required, complete all as specified and directed. |
| 90 | Materials and Labour for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall etc, complete all as specified and as directed . |
| 91 | Supply and fix in repair for brass 2 levers mortice lock, vertical type, size 100mm, complete all as specified and as directed |
| 92 | Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in concrete, masonry, brickwork etc.,including taking out embedded portion and making good disturbed ground, complete all as specified and directed. |
| 93 | Excavating in post holes (or similar holes) in soft/loose soil, each n exc 0.5cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, complete all as specified and directed. |
| 94 | Dismantling Galvanished mild steel two strand barbed wire from existing mild steel or RCC fencing post, complete all as specified and directed. |
| 95 | Dismantling chain link fencing wire mesh, any type, complete all as specified and directed. |
| 96 | S&F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc; flate iron fillets (for securing wire mesh/welded steel wire fabric etc) including all necessary drilling, bolting or riveting etc, and similar work conforming to Fe-290 Gde E-165, complete all as specified and directed. |
| 97 | S&F galvanized, 2 strand, mild steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified and directed. |
| 98 | Supply only chain link fencing of 4.00 mm Dia and aperture 50 mm x 50 mm, complete all as specified and as directed. |
| 99 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire, complete all as specified and as directed. |
| 100 | S & F of mild steel screw bolt (machine made with hexagonal or square head at one end and screwed the other or screwed both ends each screw and to be fitted with washer and one hexagonal or square nut length of but exc 5cm not exc 10cm and dia of shank 11 to 15mm, complete all as specified and directed |
| 101 | M&L for reinforced cement concrete in slabs for drain and manhole type A1 (1:1/2:3) using 20 mm Graded stone aggregate including necessary form work and demolition of RCC of any description and in any position (reinforcement shall be measured and paid separately), complete all as specified and directed. |
| 102 | M&L for TMT bars 10 mm dia and over upto and including 10 mm dia cut to length bent to shape as required incl cranking and binding with and incl MS wire (anealed) not less than 0.90 mm dia as in reinforcement in Drain cover slabs or manhole cover slabs, complete all as specified and as directed. |
| 103 | S&F Mild steel TMT defoRMed bars 10mm dia and over cut to length, bent to shape as required including binding with mild steel wire not less than 0.90mm dia (annealed) as in reinforcement in fencing as a stiffners, complete all as specified and directed. |
| 104 | M & L for prepration of old plastered or unplastered surfaces and applying one coat of oil bound distemper, complete all as specified and directed. |
| 105 | M & L for complete removal of exisiting treatment, including preparation of plastered or unplastered surfaces of wall and applying two coat oil bound distemper over a coat of primer, complete all as specified and directed |
| 106 | M & L for preparation of old wooden surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint, complete all as specified and as directed. |
| 107 | M & L for preparation of old steel surfaces of any description over 10cm girth or width, not otherwise described and applyng one coats synthetic enamel paint, complete all as specified and directed. |
| 108 | M & L for prepration of old plastered or unplastered surfaces of and applying two coat of white wash on ceiling, complete all as specified and directed. |
| 109 | M & L for complete removal of exisiting treatment, including preparation of plastered or unplastered surfaces of wall and applying two coats of anti fungal exterior emulsion weathercoat over a coat of exterior primer, complete all as specified and directed. |
| 110 | M&L for applying 1 mm thick wall care putty after cleaning and smoothening to receive putty, complete all as specified and directed. |
| 111 | M & L for prepration of old plastered or unplastered surfaces and applying two coats of Colour wash on wall, complete all as specified and directed. |
| 112 | M & L for prepration of old plastered or unplastered surfaces and applying two coats of white wash on wall, complete all as specified and directed. |
| 113 | M&L for rendering 5mm thick plastering in CM (1:3) on ceiling, soffits of slabs, chajjas, columns and beams etc and finished the plastered surface even and smooth without using extra cement including taking down cement plaster on wall of any description including racking out joints, hacking for key and scrubbing down with water etc and applying three coats of white washing on ceiling, complete all as specified and directed. |
| 114 | Materials and labour for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over alkali reistant primer over 1 mm thick wall care putty, complete all as specified and directed. |
| 115 | Materials and labour for rendering 15 mm thick cement plaster, in cement mortar (1:4) on other than fair faces of brick work or concrete surface on walls including taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc., and applying two coats of acrylic distemper over alkali resistant primer over 1 mm thick wall care putty, complete all as specified and directed. |
| 116 | M&L for Plastering in patches n exc 3.0 Sqm in each patch including taking down cement plaster on wall surface, etc. including raking out joints, hacking for key, scrubbing down with water, Rendering 15mm thick with cement mortar 1:6 and applying three coats of White Washing on wall including preparation, complete all as specified and directed. |
| 117 | Disconnecting water tanks from Roof slab/staging of single/ double/ triple storey building, float valve with Float arm and outlet pipe from PVC service water tank, emptying and cleaning and removing allscale and dirt, etc, from tanks and from mouths of circulating pipes and finally washing the internal surface with bleaching powder, closing washing outlet, refixing water tank in original position, including replacement of old tank nipple & GI union (ISI marked) and including minor repair if reqd and testing complete including writing cleaned on ........... date and next cleaning due on.........date on 2 feet height outer surface of tank with white paint after removing old dates using using paint remover for tank capacity exc. 250 ltr buut n.exc 500 ltr, complete all as specified and directed. |
| 118 | Disconnecting water tanks from Roof slab/staging of single/ double/ triple storey building, float valve with Float arm and outlet pipe from PVC service water tank, emptying and cleaning and removing allscale and dirt, etc, from tanks and from mouths of circulating pipes and finally washing the internal surface with bleaching powder, closing washing outlet, refixing water tank in original position, including replacement of old tank nipple & GI union (ISI marked) and including minor repair if reqd and testing complete including writing cleaned on ........... date and next cleaning due on.........date on 2 feet height outer surface of tank with white paint after removing old dates using using paint remover for tank capacity exc. 500 ltr buut n.exc 1000 ltr, complete all as specified and directed. |
| 119 | S & F 500 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC Float valve 20mm bore, Tank cover, wash out and overflow pipe necessary tank nipples, after disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, complete all as specified and as directed. |
| 120 | S & F 1000 Litres capacity rotational moulded poly ethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part – I with & including PVC float valve 20mm bore, tank cover, wash out pipe, overflow pipe, tank nipple,after disconnecting existing tanks from roof slab/ staging of single/double/triple story bldg, lowering, complete all as specified and as directed. |
| 121 | S & F in repair 20mm bore ball/float valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed. |
| 122 | Taking down wooden/steel shutter and re-fixing in same opening, shutters of any description exceeding 1 sqm but not exceeding 2 Sqm each with existing chowkat , frame or with new chowkat or frame after necessary repair work including easing and adjusting, complete all as specified and as directed. |
| 123 | Re-fixing in same opening, shutters of any description obtained from item No 01 and 02 above exceeding 1 sqm but n exc 2 Sqm with new chowkat , frame after necessary repair work including easing and adjusting, complete all as specified and as directed. |
| 124 | Resecuring or easing and adjusting without taking down the shutter of size exc.1 Sqm and not exc.2 Sqm, complete all as specified and as directed. |
| 125 | Repair of steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface, complete all as specified and directed. |
| 126 | Supply and Fix in repairs projecting type hinges for steel windows with side hung shutters, complete all as specified and directed. |
| 127 | S & F 2nd class hard wood timber in fillets, square, rectangular or triangular in section, clean sawn, fixed with nails, sectional area exc 13 Sqcm but not exc 25 Sqcm including dismatling old one complete all as specified and as directed. |
| 128 | M&L for loose filling with Stone boulders, levelled surface of gauge 80 to 150 mm in various electrical installations, complete all as specified and as directed by engr-in-charge. Materials and Labour for rendering 8 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 12 mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed.Note: - (Water proofing compound will be measured and paid separately) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender