Tender For special Repairs To Bldg Nk Or Living Accn Near Offrs Mess And Ew-04 Of Asc Bn And Provn Of Toilet & Bathroom At Sikh Shopping Complex (Toilet -04 Nos & Bathroom-02 Nos) And special Repair To Bldg No. T-68 (Stores And Or Living Accn) Of Fd
Tender Value
45.36 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
21 days left
EMD
90720
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ranchi → Jharkhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repairs To Bldg Nk Or Living Accn Near Offrs Mess And Ew-04 Of Asc Bn And Provn Of Toilet & Bathroom At Sikh Shopping Complex (Toilet -04 Nos & Bathroom-02 Nos) And special Repair To Bldg No. T-68 (Stores And Or Living Accn) Of Fd Regt At Dipatoli Under Ge Dipatoli
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering including ridge complete all as directed. |
| 2 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified & directed. |
| 3 | Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws all as specified and directed. |
| 4 | S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as specified and directed |
| 5 | Taking down roof trusses, Purlins and coupled rafters or trussed beams up to 4 to 8 meters complete all as directed |
| 6 | S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 grade St.-240 complete all as specified & directed |
| 7 | M&L for anodised alumunium snap grid frame work for false ceiling grid of size 605mmx605mm complete hanges from GI wire complete all as specified and as directed. |
| 8 | S&F 4mm thick texture finish type ceiling board as approved by GE fixed to timber/metal framed work with screw as in ceiling snap grid complete all as specified and directed. |
| 9 | Taking down chowkatts or frames (without taking off shutters from frame)exc 1.5 sq. m but n exc 4 sq m each complete all as as directed |
| 10 | Taking down chowkatts or frames (without taking off shutters from frame) n exc 1.5 sqm each.complete all as as directed |
| 11 | S&F powder coated Aluminium three track sliding glazed window manufactured with approved aluminium section with three sliding shutters each shutter width one half of the length of window with the following specifiecation and making good the adjascent surfaces (a) Window frame of cross section 101mmx40mmx1.5mm thick.(b) Three way track for smooth slding shutters of cross sections 91.80mmx31.75mmx1.1mm thick.(c) Sliding shutter frame of cross section 40x18x1mm. (d) Aluminium glazing stip of size 18.2x16.66mm. (e) 4mm thick flat glass superior quality for two shutter.(f) IDPE rubber gasket for fixing glass.(g) Locking cleat/device as shutter 01 Nos. (h) 02 Nos sliding roller per shutters.(j) aluminium wire cloth 0.36mm stainless steel nominal dia of wire and average width of aperature 1.40mm for one shutter.(k) Fixing screws for frame with wall 06 per window with fancy design.(Note: Window will be measured outer to outer frame and no extra to be paid.) |
| 12 | M&L for pressed steel frames of section 125 x 60 mm for doors with one or more rebates including supply and fixing lugs, hinges, lock strick plate etc complete all as specified & directed. |
| 13 | Supply & fix 30mm thick flush shutter factory made solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed. |
| 14 | M&L for Glazed and skeleton shutters 35 mm thick factory made open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.20 (a); for doors supplied and fitted to chowkats complete all as specified and directed. |
| 15 | M&L for preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 16 | M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 17 | S&F Aluminium, anodised, barrel tower bolts of 200 mm long and 10mm dia stove enamelled black with bright bolt fixed complete all as specified and directed. |
| 18 | S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified & directed. |
| 19 | Supply & fixing 125 mm Aluminium handles, cast type, anodised fixed complete all as specified & directed. |
| 20 | M&L for mild steel works as in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes and similar works conforming to Fe-290, Gde-E165 etc , complete all as specified and as directed. |
| 21 | Taking down cement plaster on brick or concrete or stone walls etc including racking out joints hacking for key scrubbing down with water any description.complete all as directed. |
| 22 | Material & labour 15mm thick rendering in CM 1:6 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified & directed |
| 23 | Material & labour 15mm thick rendering in CM 1:4 on fair fair faces of brick wall or concrete surfaces finished even and fair complete all as specified & directed |
| 24 | Materials & labour for prepration of NEW plastered surface and finishing the surfaces of wall with wall putty by applying 1 mm their and applying two coat of Oil Bound distemper over one Coat of Cement Primer of, any colour, complete all as specified & directed. |
| 25 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. complete all as specified & directed. |
| 26 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and over old surfaces.complete all as specified & directed. |
| 27 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.complete all as directed. |
| 28 | M &L for Vetrified tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 29 | M&L for vitrified tiles 7-8 mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match 15mm thick rendering1:4 complete all as specified and directed |
| 30 | M&L for Machine cut kota stone slab flooring 18-20mm thick over and incl 20mm thick cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl screed bed of CM 1:6 complete all as specified and directed. |
| 31 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and incl CM 1:4 complete all as specified and directed. |
| 32 | Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified & directed |
| 33 | M&L for 75 mm thick PCC 1:3:6 Type C-2 using 20mm graded stone aggregate as in plinth protection etc, laid to slope of 1:12 and shall be laid in alternate bays n.exc 1.5 m in length, joints 20mm wide will be provided every 1.5m and filled with ceiling compound grade ‘A’ the joints between external wall and plinth protection shall also be laid with ceiling compound grade ’A’, finished cement concrete surface even and smooth all as specified & directed |
| 34 | M&L for cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate 25 mm thick for laying of floor etc complete all as specified and directed |
| 35 | M&L for 75 mm thick cement concrete 1:4:8 type D-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 36 | S & F Chequered cement concrete tiles 20cmx20cmx25mm thick, set,jointed and pointed in neat cement slurry in floors including Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:4. complete all as specified & directed. |
| 37 | Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as directed. |
| 38 | Excavation in trenches not exc. 1.5 metre wide and not exc. 1.50 metre in depth for foundation laying cable, pipe etc and for manholes etc n.exc. 10 Sqm on plan and n.exc. 1.5 metre depth and getting out in soft/loose soil complete all as directed. |
| 39 | Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as directed. |
| 40 | Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all directed. |
| 41 | Material & labour for approved soil filling under the floor, spreading and levelling in layers n.exc. 25cm thick, well ramming including watering as required complete all as specified and directed.(Contractor shall arrange the soil at their own resources) |
| 42 | Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed. |
| 43 | Material & labour for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete and sub base of floor complete all as specified and directed. |
| 44 | Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter. Complete all as specified & directed |
| 45 | Use and waste of Form work of sides of pillars, posts, struts, piers, columns etc square or rectangular or polygonal rough surfaces of concrete Complete all as specified & directed |
| 46 | Use & waste of form work to sides and soffits of beams lintels etc finished rough. Complete all as specified & directed |
| 47 | Use & waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick flat fair finished surfaces of concrete. Complete all as specified & directed |
| 48 | Use & waste of form work to the edge of concrete flat n. exc 200 mm thick . |
| 49 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 50 | M&L for mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required as in stirrups complete all as specified and directed. |
| 51 | M&L for RCC (Nominal Mix)1:2:4 Tybe B1 using 20 mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 52 | M & L for RCC (Nominal Mix) 1:2:4 Type B1 using 20 mm graded stone aggregate as in Columns, pillars etc complete all as specified and directed. |
| 53 | M & L RCC (Nominal Mix) 1:2:4 Type B1 using 20 mm graded stone aggregate as in beams, lintels over 1.5 m span etc complete all as specified and directed. |
| 54 | M&L for RCC (Nominal Mix) using 20 mm graded stone aggregate for roof slabs supported on walls, beams and the like complete all as specified and directed. |
| 55 | M&L for brick work using fly ash modular bricks, curved or straight on plan to any radius in half brick wall builit in CM(1:4) complete all as specified and as directed by Engr-in-Charge. |
| 56 | M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4., in one brick thick honey comb walling, complete all as specified and directed. |
| 57 | M&L for rendering on other than fair faces of brick work 15 mm thick in CM 1:6 and to be finished smooth and even with out using extra cement for internal surface and including for preparing newly plastered surfaces and applying two coats of distember oil emulsion white or tinted on walls and including average 2mm thick white wall care putty to achieve even and smooth surfacecomplete all as specified and as directed by Engr-in-Charge. |
| 58 | M&L for setting coat of 3mm thick,trowelled to even and smooth finish by cement plastar 1:2 complete all as specified and directed. |
| 59 | M&L rendering on other than fair faces of brick work 15mm thick in CM 1:4 and to be finished smooth and even with out using extra cement for external surface and including for applying Two or more coats of 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and as directed by Engr-in-Charge.. |
| 60 | M&L for rendering 5mm thick in cm 1:3 on ceilling. surfaces finished even and smooth without using extra cement and including for preparation of new surfaces and applying three coat of white wash on ceiling including cornices etc complete all as specified and as directed by Engr-in-Charge. |
| 61 | M&L for 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base complete all as specified and directed. |
| 62 | M&L for Non Skid ceramic tiles 7-8 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400 x 400 x 10mm) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement joint free non skid tiles.to match 15mm thick screed bed in CM 1:6 complete all as specified and directed |
| 63 | M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx7mm/450x350x7mm thick over and including 10 mm thick cement plaster in CM (1:4); set and jointed in neat cement slurry & pointed in white or coloured cement to match the surfaces complete all as specified and directed. |
| 64 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC on roof slab.(c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction.Note : Supply only WPC shall be measured and paid separately under relevant item. |
| 65 | Supply only liquid water proofing compound.ISI Marked |
| 66 | Supply & fix mild steel framed work such as grills, gratings guard bar etc with ends of bars shouldered and/ or riveted etc completed all as specified & directed. |
| 67 | S & F powder coated anodised alm ventilator louvre type with two separate frame of size 50.5mmx40mmx1.5mm thick (01x frame for fixing of 4mm thick coloured glass & 01x frame for fixing 4mm tk figured glass) powder coated anodised aluminium section weighing 0.55 kg/m including 4mm thick figured glass, SS wire mesh and necessary joining cleats, glazing clips, rubber packing, side handles fixed to wall with fastener etc, complete all as specified & directed. |
| 68 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 69 | Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing. complete all as specified and directed. |
| 70 | Supply & fix 150mm size aluminium alloy handles cast type anodized complete all as specified & directed. |
| 71 | S&F aluminium tower bolts 150mm long, of extruded section.complete all as specified and directed. |
| 72 | Supply & fix Aluminium. Sliding door bolts, plate type, complete, 250mm long complete all as specified and directed. |
| 73 | Supplied and fixed in repair vitreous china WHB white flat back size 550x400mm including Supplied and fixed angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed. |
| 74 | Supply and fixing in repair vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of lime concrete bedding and making connection with & including PVC P Trap, etc complete all as specified and directed. |
| 75 | Supply & fix in PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed. |
| 76 | S&F in repair Gun-metal, globe or gate valves 15mm dia with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed. |
| 77 | S&F in repair Gun-metal, globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed. |
| 78 | Supply & fix bib taps cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed. |
| 79 | Supply and fixing as in repairs vitreous china urinal , half stall type, white with grating and union for discharge pipe (excluding flushing cistern,flush pipe and waste pipe) complete all as specified and directed. |
| 80 | S&F in Urinal spreader of cast copper alloy chormium plated for fixing with 15 mm dia pipe. |
| 81 | Supply & fix angular valve, 15 mm dia, cast copper alloy, chromium plated, fancy type with long shank and cup, screwed down, high pressure screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified & directed. |
| 82 | S&F in repair 15mm dia bore, stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in pipe and all as specified and directed by Engineer-in-Charge. |
| 83 | Supplied and fixed in repair 125 mm size brass chormium plated shower rose including fixing to steel pipe or union complete all as specified & directed. |
| 84 | S&F 500 ltr capacity rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions, and including 20mm dia of ball valved high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed with anti microbial property.complete all as specified and directed. |
| 85 | Supply, fix 15mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 86 | Supply, fix 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed. |
| 87 | Supply & fix butt hinges, 100 mm long of stainless steel, complete all as specified & directed. |
| 88 | Supply & fix in PVC connections of 450mm long suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed. |
| 89 | S&F PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors. complete all as specified and directed. |
| 90 | PVC (SWR), junction single, (Single T) equal or unequal 110 mm bore. complete all as specified and directed. |
| 91 | S&F for 110 mm bore PVC floor traps plain with grating and 300 mm long out let including jointing with cement concrete type B -1 1:2:4 complete all as specified & directed. |
| 92 | Supply and fix PVC bends 110mm bore, any radius complete all as specified & directed. |
| 93 | S&F as in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commerial ply wood or AC building board and fixed to wooden plugs with chromium plated brass screwes and cup washer complete (with fancy design). complete all as specified and directed. |
| 94 | S&Fix in repairs soap dish, any type fixed to plug with chromium plated brass screws. complete all as specified and directed. |
| 95 | S/F Chromium plated tubular towel rail, 20mm dia, D type 60 cm long between flanges.complete all as specified and directed. |
| 96 | S&F as in repairs corner glass shelf 300mm (with fancy ABS brackets) of size (300x300)mm complete all as specified and directed. |
| 97 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. complete all as specified and directed. |
| 98 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 150 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 99 | M&L for cement concrete bed to drain pipes including packing under ,hounching against the side of pipes after they are laid and tested in PCC (1:4:8) type D-2 for 100 to 150mm dia (RCC/PVC/DWP/SGR etc) pipe complete all as specified and directed |
| 100 | M&L for precast reinforced cement concrete type B1, 1:2:4 using 20mm graded stone aggregate in cover slabs (for manholes etc), water (tank/drain) cover, shelves, landing and similar articles with plain faces incl necessary moulds and setting in CM 1:4 complete (reinforcement to be measured separately) complete all as specified and directed. |
| 101 | M&L chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 102 | M&L for rendering 15 mm thick on fair faces of bricks/concrete surface in cement mortar (1:4) with using WPC (WPC shall be measured seperetly)on wall finishing the surfaces even and smooth without using extra cement. |
| 103 | M&L for 5 mm thick cement plaster in cement mortar 1:3 for ceiling, finished even & smooth without using extra cement complete all as specified and directed. |
| 104 | M&L for preparing newly platered surfaces and applying two coat of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed |
| 105 | M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on ceiling complete all as specified and directed |
| 106 | M&L for complete removal of existing treatment and applying two coats of distemper oil emulsion white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care puttyover priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on walls complete, all as specified and directed |
| 107 | M&L for preparing the new plastered surfaces and applying two coats of exterior Emulsion weather proof coat white or tinted over priming plastered or other surface with alkalli-resistant priming paint over 1mm thick wall care putty on walls/soffit of chajja surfaces complete all as specified directed. |
| 108 | M&L for complete removal of existing treatment and applying two coats of exterior Emulsion weather proof coat white or tinted on walls/soffit of chajja surfaces complete all as specified and directed. |
| 109 | Supply only integral water proofing compound.ISI Marked |
| 110 | Taking down of shutters area exc 1.0 Sqm but n.exc 2.0 sqm each and refixing in same opening shutters including cutting to size and fitting complete as specified and directed. |
| 111 | Resecuring or easing and adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified. |
| 112 | M&L for cement concrete type C-0,1:3:6 (12.50 mm graded crushed stone aggregate) as in coping, bed block , water trought and similar works including rounding, chamfered and throting complete all as specified and directed. |
| 113 | S&F flush shutter (35mm thick), factory made solid core construction, with block board core and plywood face panels, commercial type on both sides and fitted to chowkats complete all as specified and directed. complete all as specified and directed. |
| 114 | S & F in reapirs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 115 | S & F in Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 116 | S&F for 300 mm mild steel helical spring including roller and roller plate, complete all as specified and directed |
| 117 | S&F aluminium alloy anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast alumionium alloy and fixed 300mm long. all as specified |
| 118 | M&L for applying one coat of synthetic enamel paint on old painted wooden surfaces of any description not otherwise described over 10cm width or girth including preparation of surface all as specified and directed |
| 119 | Demolition of plain cement concrete in ground floor and paving not exceeding 15cm thickness below or above ground level including removal of same to exceeding 1 Km but not exceeding 1.5 Km complete all as specified and directed. |
| 120 | S&F for glazed ceramic tiles coloured of size 350x250x7mm/450x350x7mm thick fixed in verticle surfaces, set and jointed in neat cement slurry and pointed in white and colour cement to match incl 10mm thick rendering in CM 1:4 all as directed. |
| 121 | M&L for coloured non skid cermic tiles 7 to 8mm thick (Square/rectangular) area of each tile exc 0.18 sqm but n.exc 0.38 sqm, laid in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 all as directed. |
| 122 | All as per Item No 121 above but skirting/dado incl 10mm thick rendering in cement mortar 1:4 finished rough to recive tiles all as specified and directed. |
| 123 | Roughening surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust etc. |
| 124 | M&L for 100 mm thick PCC 1:4:8 Type D-2 using 40mm graded aggregate as in sub base all as specified and directed. |
| 125 | M&L coloured glazed chequered cement concrete tiles with grey cement and no pigment 30cmx30cmx25mm thick over 15mm thick screed bed in CM 1:6 set jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engr-in-Charge. |
| 126 | M & L , PCC (1:2:4), type B-1 using 20mm graded stone aggregate as in coping etc incl weathering, slightly rounded or chamfered and throating with necessary form works complete all as specified and directed. |
| 127 | M&L for roof treatment over in-accissible roofs in repair by complete removel of existing old treatment and treated with following specifications:(a) Brushing neat cement slurry @ 3Kg per Sqm on roof slab.(b) 15 mm thick cement plaster fair finished using cement mortar (1:4) with WPC (as per manufacturer instruction) on roof slab.(c) Applying oil based bitumen primer @ 0.30 ltr/Sqm on plastered surface.(d) Applying modified APP polymeric membrane 3mm thick and minimum weight 3.00 Kg / Sqm for water proofing of roof , sealing as directed at site with 100 mm over laps as per manufacture's instruction. |
| 128 | Demolition of brick work built in cement mortar or lime mortar complete of any description all as specified and directed. |
| 129 | M&L for brick work with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and directed. |
| 130 | M&L for repair and rendering 10mm thick in CM 1:3 on chajjas not exceeding 60cm width after removing cracked plaster and concrete including cleaning of viisible reinforcement and treating with cement slurry also necessary repair to cracked concrete if any with cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate including necessary scafolding work for double/single storey bldgs all as directed. |
| 131 | S&F in repairs decorative curtain rod made out of 25mm dia (outer dia) MS pipe having wall thickness 0.63mm, PVC coated of any colour and pattern as approved overall dia 28 to 28mm, includiing and including two nos brackets on each ends alongwith globe on each ends for earch window/door fro fixing complete all as specified and directed with fancy design |
| 132 | S&F in repaire Vitreous china white wash down water closet (Pedestal pattern) including connection to drain ( or outgoing pipe) and to flushing pipe, antisyphonage pipe etc incl P or S trap. |
| 133 | S& F in repairs only plastic water closet seat, white closed pattern with flat bottom and cover and mild steel chromium plated or anodised hinging device |
| 134 | S&F in repair for PVC waste pipe of 32/38/40 mm dia and 1000 mm long to WHB, urinal and Kitchen sink complete all as specified and directed with fancy design. |
| 135 | S&F in repair stop valve (concealed type), cast copper alloy fancy type chromium plated screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of size 15mm bore. |
| 136 | S&F in repair Angle valve / stop valve , cast copper alloy fancy type chromium plated with long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions Mand fixed of size 15mm bore with fancy design (half turn type) |
| 137 | S&F in repairs Bib taps fancy type cast copper alloy chormium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule (half turn type). |
| 138 | S&F in repairs brass CP wall mixer tap, fancy type, half turn 15mm dia bore (three in one) for mixing hot and cold water screwed down for iron pipe and fixed in wall and all as specified and directed. |
| 139 | S&F in repairs Brass CP mixer basin tap (mixer pillar tap) 15mm dia bore for mixing hot & cold water with lettered HOT and COLD screwed down for iron pipe with fancy design. |
| 140 | S&F in repairs CP grating 110mm. |
| 141 | Dismantling of existing water tanks and removinging to store and S&F 1000 ltr capacity Rotational moulded polyethylene water storage tank (cylindrical vertical closed top) hoisted and fixed in positions all as specified in SSR Part-I,including 20 mm dia of ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed. |
| 142 | Taking up or down steel tubing and connection of 15 mm bore complete all as specified directed at site |
| 143 | All as per item No 142 above but for 20 mm dia bore pipe |
| 144 | Supplying and laying 16mm of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors all as spd and directed. |
| 145 | -Ditto-All as above item No 144 but for 20 mm dia |
| 146 | Cutting chases in brickwall pinning in making good to facings where required and pointing in cement mortar 1:3 to ends and cutting chases for concealed water tubing and making good cutting n.exc. 10 cm girth. |
| 147 | Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittins,heads,shoes,bends,swan-necks,etc including removing from site |
| 148 | M&L for 110mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 149 | M&L for 75mm bore, PVC (SWR) pipes, single socketed, in any length, with rubber ring joints fixed on walls including PVC clamps fixed to wall properly including fixing of pipe with PCC (1:2:4) complete all as specified & directed. |
| 150 | S&F in repairs CPVC gate valve 20mm dia screwed down high pressure with crutch or butterfly handle, screwed both ends for CPVC pipe or 20mm bore, complete all as spd and directed- |
| 151 | S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 100mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof |
| 152 | S & F in repair stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays of 75mm borer of pipe Including bolts and nuts and securing ends of stays to wall or roof, complete all as specified & directed. |
| 153 | S&F PVC (SWR) bends 75 mm bore of any radius all as specified & directed. |
| 154 | S&F PVC (SWR) junction single (singleT) equal or unequal 75mm bore provided with access door all as specified & directed.. |
| 155 | S&F 110 mm bore PVC (SWR) vent cowl. |
| 156 | S&F 75 mm dia outlet PVC (SWR) Nahani/floor trap plain with steel grating including jointing with solvent cement. |
| 157 | S&F 110mm dia PVC (SWR) WC connector with lip ring |
| 158 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for such as cover slab of manholes and septic tank, etc, reinforcement cut as required to facilite demolition complete all as directed |
| 159 | M&L for RCC 1:1.5:3 nominal mix using 20 mm graded stone aggregate for Chajja. All as directed |
| 160 | Formwork flat to chullah hoods, chajjas, troughs and similar items including edgesaall as directed & specified |
| 161 | M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast manhole / septic tanks covers including necessary form work and setting in CM 1:4 complete all as specified and directed. |
| 162 | M&L for mild steel TMT bars 6-8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with clips complete all as specified and directed. |
| 163 | M&L for providing PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in coping of manholes and similar work complete all as specified and directed. |
| 164 | M&L for PCC 1:2:4 type B-2(using 40 mm graded stone aggregate) as in channels benching of manhole, laid to shape and slope, including necessary form work etc complete all as specified and directed. |
| 165 | S&F anchoring (for fixing extra reinforcement as required, minimum 200 mmlenght) using and providing approved make epoxy anchoring grout (such as MASTERFLOW 935 of BASF/SIKA ANCHOROFIX-2 of SIKHA shall Grout Anchor of STP/Lokfix of fosroc or using equivalant approved product) inclusive of manpower, material and equipment all complete. reinforecment to be paid separately) |
| 166 | Cutting into exisiting manholes 150mm dia for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required complete all as specified and directed. |
| 167 | M&L for point wiring in replacement for One light/Fan point controlled by one five amps one way single pole switch complete with 1.5 sqmm , single core , multi stranded copper conductor PVC insulated and unsheathed FRLSH cable 1100 Volts grade , drawn through PVC concealed conduit 20/25 mm dia medium grade on wall/ceiling ,including replacement by new modular sheet top covers and sunk type CI/steel terminal boxes, for mounting of switch & scoket including 1.5 sqmm size pvc insulated unsheathed copper conductor to common earth and connecting to earth dolly complete all as specified and directed.Note: The rate quoted is deemed to be included for PVC modular sheet top cover and steel terminal box, for fixing of modular switch and scoket including cutting chases in wall making good to disturbed surface and matching with existing surfaces. |
| 168 | All as per Ser item No 167 here-in-before but one 3 Pin Socket out let 5 Amps on the same board. |
| 169 | All as per Ser item No 167 here-in-before but one 3 Pin Socket out let 5 Amps on the independent board. |
| 170 | All as per Ser item No 167 here-in-before but point wiring with 2.5 sqmm for 15 Amp socket out let & provision of earth wire 2.5 sqmm connected to common eart dolly. |
| 171 | S&F Switch modular 1 way 6 Amps single pole complete all as specified & directed. |
| 172 | S&F Switch modular single pole , one way 16 Amps complete all as specified and directed. |
| 173 | S&F Socket modular 2/3 pin combined 6 Amps complete all as specified and directed. |
| 174 | S&F Socket modular 2/3 pin combined 6/16 Amps complete all as specified & directed. |
| 175 | S&F Ceiling rose, 3 terminal PVC/polycarbonate complete all as specified and directed. |
| 176 | M&L in replacement for submain complete with 2x4 sqmm, single core, multi stranded copper conductor , PVC insulated and unsheathed FRLSH cable 1100 Volts grade, drawn in with and including PVC concealed conduit 20/25 mm dia as per site requirement along walls/ceiling etc including 4 sqmm size pvc insulated unsheathed copper earth continuity conductor to common earth and connecting to earth dolly complete all as specified and as directed. Note:- (i) all three wire(Phase red colour,neutral black colour and earth wire green colour) should be run through for each individual circuit from the DBs(ii) painting over surface conduit to be done to match with walls/ceiling existing surfaces. (iii) Two run of wire (phase & neutral) and one run of wire (earth conductor) be measured as one length) |
| 177 | S & F for sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 178 | S&F in replacement of MCB SP 6 to 32 Amps 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles complete all as specified and directed. |
| 179 | S&F in replacement of MCB DP 40 Amps to 63 Amp 'C' Series 10 KA fixing in DBs, connecting with bottel type copper thimbles. |
| 180 | S&F in replacement of LED tube light fitting 20 watt 230 Volt decorative ultra slim linear LED Lighting with aluminium housing & integrated electronic driver , including all internally pre-wired and inncluding connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed at site. |
| 181 | S&F in replacement Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 182 | S & F for energy efficient exhaust fan Copper winding of 300 mm sweep made of metal body Ventil Air -DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection & body earth connection with ceiling rose and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed including taking down old exhaust fan and deposit old unsv exhaust fan to MES store yard of AGE E/M Dipatoli |
| 183 | Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc. complete all as specified and directed. |
| 184 | S & F for modular fan regulator 2 module complete all as specified and directed at site. |
| 185 | S & F in replacement wall mounted Industrial grade LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high tranmissitvity diffuser, luminous efficacy not less than 120 lumen/watt,THD <10% , Glare Free, natural white, power factor greater than 0.95, Color Temp 6500K(Cool white), CRI 80, In-built surge protection of 4 KVA, 230 volts complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 mm from ceiling rose to fitting complete all as specified and as directed. |
| 186 | S & F in replacement for Industrial grade Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP66 & IK07 for security light fitting luminaire (120 lm/watt), with toughened glass, CRI>80, Power Factor >0.95 with high power LEDs as light source and electronic driver of capacity 35 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed by Engineer- in-charge. |
| 187 | Supply and fixing ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 230 CFM with Min service value 6.5 BEE. Five star rated with brushless direct current (BLDC) motor and Anti-dust coating complete all as specified and as directed including taking down old fan and deposit old unsv ceiling fan to MES store yard of AGE E/M Dipatoli |
| 188 | S & F in replacement for sheet metal enclosure MCB DB SPN 12 way with 200 Amps rated bus bar 240 volts double door with push/slide locking system including filling any blank slot with blanking plates & necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 189 | M & L in replacement for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 190 | S&F Geyser 25 Litres with inner tank and heating element 2KW capacity, BEE 5 Star rated, PUF insulation, outer body made of rutst proof ABS and plastic end cover complete with all accessories such as safety valve, themostate, NRV, connection piece, anchor bolts etc incl record serial No, Make and marking MES No (As given by MES), complete all as per specified and as directed by Engineer-in-charge. (Note- Manufacturer shall provide warranty of inner tank for minimum 7 years and warrantee for heating element for minimum 3 years) including taking down & depositing old one to AGE E/M dipatoli store. |
| 191 | Supply & Laying in replacement ,connecting, testing and commissioning of XLPE LT UG cable of size 16 sqmm 2 core PVC insulated and sheathed armoured heavy duty cable 1100 V grade with alu conductor cable all as specified & directed. |
| 192 | Supply and Spread dry river sand for cable cushioning in trenches all as specified and directed.Note : Punned down thickness shall be considered for measurement |
| 193 | Supply and lay burnt bricks sub class ‘B’ old size laid dry in trenches across the cable protection all as specified and as directed |
| 194 | S& F GI pipe light grade 50 mm dia of for cable connection with all fitting and fixed complete to walls andceilings or laid in floors/wall complete all as specified and directed by Engineer-in-Charge. |
| 195 | M&L for GI electrode chemical earthing, pipe in pipe technology of high conductive, corrosion resistant, CPRI tested maintenance free chemical earthing pit to achive earth resistance value less than or equal to 3 Ohm & EN voltage < 02 V,pipe in pipe technology based in which primary conductor (Pipe) having 40 MM dia and primary conductor is inserted into secondray conductor having 80 MM dia. The primary conductor is inserted into secondory conductor and space between secondary and primary conductor of earthing electrode should becrystalline compound. The length of this electrodes is min 3000 MM (3 meters) and earth pit's bore hole should be of dia 200 to 250 mm and min depth 3.50 meters. Length of electrode will be increase with galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised ironor steel, and total depth should not less than 3.50 meters. Around the earth electrode earth pit borehole should be backfilled with minimum 50 Kg of ground enhencement compound ERIC Contains mixture of Silica sulphate,Alumina, Iron Oxide, titanium Oxide, Calcium Oxide,Sodium Oxide, Zink Oxide etc. ). including RCC earthing pit having 450 x 450 Cl chamber cover all as directed by Engineer-in-Charge.( Note : If less than 3 Ohm result has not acheived at site the contractor is responsible to do grid system to achieve the desired result and no extra payment shall be made to the contractor for making grid system.) |
| 196 | S&F Polycarbonate Modular AC Box in replacement with 20 to 32Amps Single Pole MCB, enclosure and Heavy Duty ISI Plug Top (White) with indicator and connecting complete all as specified and directed. Please Enable Macros to View BoQ information |
| 197 | S&F Polycarbonate Modular AC Box in replacement with 20 to 32Amps Single Pole MCB, enclosure and Heavy Duty ISI Plug Top (White) with indicator and connecting complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender