Tender For Special Repair / Replacement Of Unsv Lt Panels And Cables For Adm Block/Ot And Wards At Mh Under Ge(A) Jamnagar.
Tender Value
42.04 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
23 days left
EMD
84100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jamnagar → Gujarat
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair / Replacement Of Unsv Lt Panels And Cables For Adm Block/Ot And Wards At Mh Under Ge(A) Jamnagar.
BOQ
| Sl. No. | Item Description |
| 1 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 400 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 2 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with 185 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 3 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 150 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 4 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 120 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 5 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 95 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 6 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 50 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 7 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with alumini3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 8 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 25 sqmm 3.5 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 9 | M & L for XLPE insulated screened PVC bedded galvanised steel strip or wire armoured UG heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area of 10 sqmm 4 core size laid in trenches under floor/roads/hard standing along poles etc complete all as specified and directed by Engr in Charge. |
| 10 | Supply and fixing GI pipe light grade 40 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah complete all as specified and directed by Engr - in - Charge. |
| 11 | Supply and fixing GI pipe light grade 80 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah complete all as specified and directed by Engr - in - Charge. |
| 12 | Supply and fixing GI pipe light grade 100 mm bore for cable protection fixed to poles/along wall/floor/under road/across the drain or nallah complete all as specified and directed by Engr - in - Charge. |
| 13 | Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m depth for foundations, sewage lines etc and n.exc 10 Sqm on plan for manholes and getting out in soft/loose soil complete all as specified and directed. |
| 14 | Returning, filling in, including, spreading, leveling, watering and well ramming in layers not exc. 25 cm depth as in any type of soil complete all as specified and directed. |
| 15 | Removing excavated materials to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m from starting point complete all as specified and as directed. |
| 16 | M&L for filling dry and clean sand in trenches for cable cushioning 8cm below and 15 cm above complete all as specified and directed. |
| 17 | Supplying and laying reinforced precast concrete cable cover, class EHV, type 1 with peak Class LV, Type I, flat, size 250mm x 150mm x 40mm complete all as specified and directed |
| 18 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items: Location :Main LT Panel No. 1BUSBAR:- (i) 1200 Amps rated aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistance.INCOMING(i) 4 Pole ACB 800 A, breaking capacity 50kA with Microprocessor Release IPR 1= 01 No(ii) Digital Voltmeter 0 - 500 Volt with in built selector switch - 01 No.(iii) Digital Ammeter 0 - 160 Amp with in built selector switch - 01 No.(iv) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, B phase - 01 SET(v) Digital frequency meter 40-60 Hz - 01 No.(vi) Copper wound with CTR 160/5 - 03 Nos |
| 19 | ITEM NO 18 (Contd...)OUTGOING(i) 4 Pole ACB 630 A, breaking capacity 50kA with Microprocessor Release IPR 1= 01 No (For Main LT Panel 2 )(ii) MCCB 4 Pole 350 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 50 KA. at 415 volts ics=100% Icu - 01 No (For OH Line)(iii) MCCB 4 Pole 250 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 No (For SP 3)(iv) MCCB 4 Pole 100 Amps;Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 No (For Isolation Ward)(v) MCCB 4 Pole 63 Amps;Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 No ( for Street Light )(vi) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 04 set |
| 20 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items: Location : Main LT Panel 2 (DG Set) BUSBAR:- (i) 900 Amps rated aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistance.INCOMING(i) MCCB 4 Pole 630 Amps, 50 KA with Rotary Handle, microprocessor release adjustable amp Ics = 100% Icu as per IEC 60947-2 1 Adjustable Over load from 0.5 to 1*In , Adjustable Short Circuit from 2 to 10*Ir , Adjustable Neutral Protection - N, N/2,OFF for 4 Pole MCCB , Inbuilt Thermal Memory- 01 No (in coming)(ii) Digital Voltmeter 0 - 500 Volt with in built selector switch - 01 No.(iii) Digital Ammeter 0 -160 Amp with in built selector switch - 01 No.(iv) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, B phase - 01 Set |
| 21 | Item No 19(Contd...)(v) Digital frequency meter 40-60 Hz - 01 No.(vi) Copper wound with CTR 160/5 - 03 Nos(vii) Off load Changover Switch 400 Amp -01 No(viii) Off load Changover Switch 200 Amp -01 NoOUT GOING (i) MCCB 4 Pole 350 Amps,Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 Nos (For SubPanel No. 1)(ii) MCCB 4 Pole 200 Amps,Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 Nos (For SubPanel No. 2)(iii) MCCB 4 Pole 160 Amps,Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 Nos (For OT & X-ray)(iv) MCCB 4 Pole 100 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 02 Nos (For oxygen Plant & Spare)(v) MCCB 4 Pole 125 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 No (For Oxygen plant)(vi) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 04 set |
| 22 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items: Location : Sub Panel No. 1BUSBAR:- (i) 300 Amps rated aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistanceINCOMING(i) MCCB 4 Pole 200 Amps, 36 KA with Rotary Handle, microprocessor release adjustable amp Ics = 100% Icu as per IEC 60947-2 1 Adjustable Over load from 0.5 to 1*In , Adjustable Short Circuit from 2 to 10*Ir , Adjustable Neutral Protection - N, N/2,OFF for 4 Pole MCCB , Inbuilt Thermal Memory- 01 No (in coming)(ii) Digital Voltmeter 0 - 500 Volt with in built selector switch - 01 No.(iii) Digital Ammeter 0 - 160 Amp with in built selector switch - 01 No. |
| 23 | Item No 20 Contd...)(iv) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, B phase - 01 SET(v) Digital frequency meter 40-60 Hz - 01 No.(vi) Copper wound with CTR 160/5 - 03 NosOUT GOING (i) MCCB 4 Pole 160 Amps,Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 Nos (For Adm block)(ii) MCCB 4 Pole 100 Amps,Rotary Handle, Adjustable Thermal Magnetic relay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 02 Nos (For Phy lab & dental)(iii) MCCB 4 Pole 63 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 02 Nos (For Medical ward & Surgical Ward)(iv) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 04 set |
| 24 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items: Location : Sub Panel No. 2BUSBAR:- (i) 300 Amps rated aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistanceINCOMING(i) MCCB 4 Pole 200 Amps, 36 KA with Rotary Handle, microprocessor release adjustable amp Ics = 100% Icu as per IEC 60947-2 1 Adjustable Over load from 0.5 to 1*In , Adjustable Short Circuit from 2 to 10*Ir , Adjustable Neutral Protection - N, N/2,OFF for 4 Pole MCCB , Inbuilt Thermal Memory- 01 No (in coming)(ii) Digital Voltmeter 0 - 500 Volt with in built selector switch - 01 No.(iii) Digital Ammeter 0 - 160 Amp with in built selector switch - 01 No. |
| 25 | Item No 21 Contd...)(iv) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, B phase - 01 SET(v) Digital frequency meter 40-60 Hz - 01 No.(vi) Copper wound with CTR 160/5 - 03 NosOUT GOING (i) MCCB 4 Pole 63 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 03 Nos (For Labour Room , Offrs Ward & family Ward)(ii) MCCB 4 Pole 40 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 Nos (For Gyn OPD)(iii) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 04 set |
| 26 | Supply, installing, testing and commissioning out door type LT feeder piller box of suitable size, padestal mounted, CPRI approved factory made totally enclosed, dust and vermin proof, shutter in front and in rear side made of 3.15 mm thick CRCA sheet, duly fabricated and having proper locking arrangement in both front and rear door with 4 side slanting roof duly projected and painted to both internal and external surfaces with powder coating paint in heat process of sheet and suitable for 500 volts, 50 Hz, 3 phase 4 wire system and comprising with and including following accessories and mounted on PCC Plat form made out of PCC 1:3:6, 100 mm thick, 1 Mtr all round the panel board complete with the following items: Location : Sub Panel No. 3BUSBAR:- (i) 400 Amps rated aluminium bus bar TPN duly insulated with coloured PVC sleeve as per standard colour code and rigidly mounted on bakelite/DMC insulator bus bar support (Square/round) insulators of suitable size and good insulation resistanceINCOMING(i) MCCB 4 Pole 250 Amps, 36 KA with Rotary Handle, microprocessor release adjustable amp Ics = 100% Icu as per IEC 60947-2 1 Adjustable Over load from 0.5 to 1*In , Adjustable Short Circuit from 2 to 10*Ir , Adjustable Neutral Protection - N, N/2,OFF for 4 Pole MCCB , Inbuilt Thermal Memory- 01 No (in coming) |
| 27 | Item No 22 Contd...)(ii) Digital Voltmeter 0 - 500 Volt with in built selector switch - 01 No.(iii) Digital Ammeter 0 - 160 Amp with in built selector switch - 01 No.(iv) Indicator Lamps (LED type) & bakelite fuseshowing R,Y, B phase - 01 SET(v) Digital frequency meter 40-60 Hz - 01 No.(vi) Copper wound with CTR 160/5 - 03 NosOUT GOING (i) MCCB 4 Pole 63 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 04 Nos (For Nursing Mess,Offrs Mess,ECHS & Street Lights))(ii) MCCB 4 Pole 160 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 36 KA. at 415 volts ics=100% Icu - 01 Nos (For Nursing Qtrs)(iii) MCCB 4 Pole 25 Amps,Rotary Handle, Adjustable Thermal Magneticrelay with breaking capacity 16 KA. at 415 volts ics=100% Icu - 01 Nos (For Guest Room)(iv) Street Light Timer switch with 4 pole Contractor rating 63 Amp-01 No(iv) Indicator Lamps (LED type) & bakelite fuse showing R,Y, B phase - 04 set |
| 28 | Supply, install and testing Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel drawn through 40 mm dia light grade GI pipe as shown in electrical plate No. 3 of SSR part I of 2009 including necessary excavation and earth work GI Pipe 20mm dia light grade for watering PCC Chamber with PCC Cover in cement concrete 1:2:4 Type B1 (20mm graded aggregate),funnel,wire mesh,charchol dust ,salt etc connected to earthing test point all as specified by Engr-in-charge.Note :- Earth strip and GI protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 29 | M&L for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 150 mm dia suitable for 0.4 mpa working pressure complete all as specified and directed by the Engr-in-Charge |
| 30 | Supply and fix cable jointing kit for 1100 V grade cable for Out door termination heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE, armoured ,Al conductor cable of size 16 sqmm to 50 sqmm complete all as specified and directed by the Engr-in-Charge. |
| 31 | Supply and fix cable jointing kit for 1100 V grade cable for Outdoortermination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE, armoured ,Al conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed by the Engr-in-Charge. |
| 32 | Supply and fix cable jointing kit for 1100 V grade cable for Outdoortermination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE, armoured ,Al conductor cable of size 150 sqmm to 400 Sqmm complete all as specified and directed by the Engr-in-Charge. Please Enable Macros to View BoQ information |
| 33 | Supply and fix cable jointing kit for 1100 V grade cable for Outdoortermination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE, armoured ,Al conductor cable of size 150 sqmm to 400 Sqmm complete all as specified and directed by the Engr-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 27, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender