Tender For Repair/Replacement To Roof Sheets, Ceiling And Other Misc B/R Works In Certain Otm And Md Accn Building Under The Aor Of Ge Nasik Road Camp
Tender Value
40 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
21 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nashik → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement To Roof Sheets, Ceiling And Other Misc B/R Works In Certain Otm And Md Accn Building Under The Aor Of Ge Nasik Road Camp
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets,kitchen cabinets board any thickness, including cover fillets, frame etc. |
| 2 | S&F in position suspended false ceiling system using T-grid suspended ceiling grid system. The size of grid shall be 600x600 mm with GI frame work main runner 38x24x3600mm, cross T 25x24x600mm/25x24x1200mm and wall angle 24x24x2540mm (thickness of the materail of 0.30mm) using 9mm thick ceiling panel laminated with PVC film on front face and foil back available in the drop texture as per IS-2095, Part-I 1996, fixed in the grid of T-grid suspended ceiling grid system duly susupended by 4mm dia GI bar hanged from the purlins of the roof with butter fly clips complete all as specified and directed. |
| 3 | S&F in repair aluminium composite panel (ACP) sheet with 1\\"x1.5\\" aluminium tube of 0.90-1 mm thick over the framed as in wall, column or wherever located and directed. ACP shell meet undermentioned tech requirements. (i) Coating on front: High polymer resin. (ii) Core: FR core (iii) Thickness: 3mm (iv) Weight : 5.0 kg/sqm. (iv) Temp resistance: between - 50 c to 80c. Note: Rate is deemeed to be inclusive of scaffolding required and joint sealing, taking down carefully point wiring/switchboard in wall/ceiling and refixing the same in any position complete all as specified and directed . |
| 4 | Dismantling wrought iron or mild any description such as steel gate, steel frame works, purlins, rafter, railings, balusters and window guard bars and directed. |
| 5 | S&F MS work as in trusses/purlins/rafter/post/tank staging etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS : 4923-19979 grade YSt.-210 over and including applying two coats of synthetic enamel paint over a coat of primer. |
| 6 | Dismantling Pre-painted galvalume aluminum, CGI corrugated and plain sheets in wall cladding or roof coverings including ridges complete all as specified and directed. |
| 7 | S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mPa as in roof covering / cladding to wall, fixed with self tapping screws (at any height / any location) complete all as specified and directed. |
| 8 | M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregates as in coping on top of wall and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing exposed surfaces of concrete even and smooth without using extra cement complete all as specified and directed. |
| 9 | S&F in repair 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 (at any height / any location ) complete all as specified and directed. |
| 10 | S&F bands, straps, supports or stays for rainwater, ventilating pipes, vally guters and wind tie for ridge including bolts, bending, welding, reveting to supporting if required hooks (stay), heavy, similar small articles conforming to Fe-290 Gde-E-165 |
| 11 | S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment |
| 12 | S&F chequered cement concrete tiles rubber moulded 300x300x25 mm confirm to IS 13801-1993 and ISI marked (with Gray cement and Pigment) laid over 20 mm thick screed bed in CM 1:6 set and jointed and pointed in neat cement slurry as in floors/pavings complete all as specified and directed. Please Enable Macros to View BoQ information |
| 13 | S&F chequered cement concrete tiles rubber moulded 300x300x25 mm confirm to IS 13801-1993 and ISI marked (with Gray cement and Pigment) laid over 20 mm thick screed bed in CM 1:6 set and jointed and pointed in neat cement slurry as in floors/pavings complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender