Tender For Providing Additional Aminities For The Main Work Of Combined Water Supply Scheme To Government Polytechnic College, Srirangam, Sethurapatti, Trichy-12.
Tender Value
6.80 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
6800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruchirappalli → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Additional Aminities For The Main Work Of Combined Water Supply Scheme To Government Polytechnic College, Srirangam, Sethurapatti, Trichy-12.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work excavation for foundation by Mechanical means for Isolated & Combined Footing etc in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 100 mts and clearing and levelling including dressing of sides and raming of bottoms etc., complete complying with standard specification and as directed by the departmental officers.- Upto 2.40m Footing Depth. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Brick work in following Cement Mortar 1:5 using best quality Fly ash Brick of size 230x110x70mm with class designation of 7.5 conforming to IS 13757-1993 or IS 12894-2002 for foundation and basement including Cost of Mortar Plasticizer, curing,etc., complete complying with standard specification and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally. other type of bond shall be done as directed by the Executive Engineer in charge |
| 4 | For Foundation & Basement |
| 5 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 6 | Supplying and filling in foundation, basement, etc with filling crushed stone sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 7 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two Crushed Stone Sand and Four aggregate) using 6 to12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trowel, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 8 | Plastering the surface of walls with Cement Mortar 1:5 (One cement and Five plastering sand), 20mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used , curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 9 | Supplying & Fixing of PVC Water Tank Capacity of 1000 liters with best approved quality confirming to BIS. complete complying with standard specifications. (The PVC Tank should be got approved by the Executive Engineer before use on works). |
| 10 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50 kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - Internal water supply above ground level. |
| 11 | 32mm Dia pipe |
| 12 | Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements |
| 13 | 32 mm Dia Elbow |
| 14 | 32 mm Dia Tee |
| 15 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work. |
| 16 | 32 mm Dia Gun Metal Valve |
| 17 | Supplying & fixing of 3 HP Submersible Pump with best approved quality confirming to BIS. complete complying with standard specifications. (The Pumb should be got approved by the Executive Engineer before use on works). |
| 18 | Supply, Delivery of Materials at Site, Installation, Testing and Commissioning of Auto Operated Normal Purified Water Dispense with in built 50 litres per Hour RO plant with following accessories and specifications, (a) Dispense Flow rate - 250 litres per Hour (b)RO purified Water Flow - 50 litres per Hour (c) Pure Water recovery of 25% (d) Purification stages Stage-1: 10 Micron Filter Stage-2: Activated Carbon Filtre Stage-3: 5 Micron Filtre Stage-4 : RO process Stage-5 : Post Carbon (e) MOC of the cabinet - Stainless Steel (f) Dimension of the Cabinet - 550mm x 525mm x 1450mm (g) No of Faucet Offered - 6 Nos (Each side - 2 Nos @ 3 sides) (h) Storage Tank Capacity - 80 Litre (i) Storage tank MOC - LLDPE Net Weight Approximate - 58kgs. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact |
| 19 | Drilling of 6\\" or 150mm dia vertical bore in hard rock area to any required depth as directed by the departmental officers including labour charges for inserting casing pipes assembly in the drilled holes which excluding cost of 150mm dia PVC casing pipes of required depth. |
| 20 | Drilling upto 150m |
| 21 | Supply of 150mm dia PVC Casing pipe of approved brand and quality etc., complete. |
| 22 | Supplying suitable PVC End cap ( 6kg/sqcm) of best for casing pipe of 6\\" dia borewell quality with ISI mark, The PVC should got approved by the departmental officers. |
| 23 | Supplying and fixing of HDPE Hose of approved quality and best variety comforming to ISI mark of suction pipe for sub-mersible motor as directed by the departmental officers 40mm |
| 24 | Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days UP To 5HP |
| 25 | Supply and fixing of water proof 3 core 4sq.m. flat PVC insulated copper cable for submersible pumpset in the borewell including fixing and tying with copper wire and clamping water pipe etc., complete |
| 26 | Supplying and fixing of 1/2 dia Nylon rope for submersible motor of approved quality in etc.,complete complying with standard specifications. |
| 27 | Sub total |
| 28 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender