Tender For miscellaneous Activities For Organizing Flower Show 2026-2027 At Digboi Refinery Township.
Tender Value
26.66 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
10 days left
EMD
7000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tinsukia → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for miscellaneous Activities For Organizing Flower Show 2026-2027 At Digboi Refinery Township.
BOQ
| Sl. No. | Item Description |
| 1 | SOR items |
| 2 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m: All kinds of soil. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, for all lift including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m: All kinds of soil. |
| 4 | Extra for every additional lift of 1.5 m or part thereof in excavation/ banking excavated or stacked materials: |
| 5 | All kinds of soil. |
| 6 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming, consolidating and dressing complete. |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift. |
| 8 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 9 | Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - Cement shall be free issue material. All work up to plinth level : |
| 11 | 1:3:6 (1 Cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centring, shuttering and finishing: Cement shall be free issue material |
| 13 | 1:2:4 (1 Cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete. |
| 16 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 18 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level: |
| 19 | Thermo-Mechanically Treated bars. |
| 20 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : (Cement shall be free issue material). |
| 21 | 1:2:4 (1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 22 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement (Cement shall be free issue material): |
| 23 | 1:1.5:3 (1 cement : 1.5 coarse sand (Zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 24 | Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete excluding plastering of the jambs, sills and soffits: |
| 25 | 50 mm thick |
| 26 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: (cement shall be free issue material). |
| 27 | Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 28 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : (cement shall be free issue material). |
| 29 | Cement mortar 1:4 (1 cement : 4 coarse sand). |
| 30 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in: (cement shall be free issue material). |
| 31 | Cement mortar 1:3 (1 cement : 3 coarse sand). |
| 32 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level: (cement shall be free issue material). |
| 33 | Cement mortar 1:3 (1 cement :3 coarse sand). |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately): |
| 35 | Kiln seasoned and chemically treated hollock wood. |
| 36 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 37 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 38 | Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer: |
| 39 | M.S. tube. |
| 40 | Providing and fixing Glass mossaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge. |
| 41 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand) (Cement shall be free issue material): |
| 42 | Light shade pigment using white cement. |
| 43 | Dark shade pigment using ordinary cement. |
| 44 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: Single socketed pipes: |
| 45 | 75 mm diameter. |
| 46 | Providing and fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts and nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra- violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified: |
| 47 | 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified. |
| 48 | 2mm thick flat. |
| 49 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 50 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 51 | Colour washing such as green, blue or buff to give an even shade : |
| 52 | New work (two or more coats) with a base coat of white washing with lime. |
| 53 | Applying a coat of mordant solution on G.S. sheet : |
| 54 | With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. |
| 55 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade-Two or more coats on new work. |
| 56 | Painting with aluminium paint of approved brand and manufacture to give an even shade - Two or more coats on new work. |
| 57 | Varnishing with varnish of approved brand and manufacture: |
| 58 | Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. |
| 59 | Lettering with black Japan paint of approved brand and manufacture. Note: Rate EACH (EA) stands for \\"Per letter per cm height\\". |
| 60 | 15 mm cement plaster on the rough side of single or half brick wall of mix (Cement shall be free issue material): |
| 61 | 1:4 (1 cement: 4 fine sand). |
| 62 | Neat cement punning. Cement shall be free issue material. |
| 63 | Rough cast plaster up to 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement - Ordinary cement finish using ordinary cement. Cement shall be free issue material. |
| 64 | Pebble dash plaster up to 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size, dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement. Cement shall be free issue material. |
| 65 | Re-lettering with black Japan paint of approved brand and manufacture. Note: Unit \\"EACH\\" (EA) stands for \\"Per letter per cm height\\". |
| 66 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge: |
| 67 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). |
| 68 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 69 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge: |
| 70 | In cement mortar. |
| 71 | Supplying and stacking at site: |
| 72 | 90 mm to 45 mm size stone aggregate. |
| 73 | 63 mm to 45 mm size stone aggregate. |
| 74 | Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) - Payment to be made per metre cost of total length of barbed wire used - With G.I. barbed wire. |
| 75 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately)- Payment to be made per metre cost of total length of barbed wire used - With G.I. barbed wire. |
| 76 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 77 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: |
| 78 | 10 litre capacity - White. |
| 79 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 80 | White solid plastic seat with lid. |
| 81 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete: |
| 82 | Semi rigid pipe - 32 mm dia. |
| 83 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: |
| 84 | Circular shape - 450 mm dia. |
| 85 | Providing and fixing 600 x 120 x 5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 86 | Providing and fixing toilet paper holder : |
| 87 | C.P. brass. |
| 88 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour: |
| 89 | Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45 gms. |
| 90 | Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms. |
| 91 | Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distances of 37mm from wall face with concealed fittings arrangement of approved quality and colour. Weighing not less than 88 gms. |
| 92 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2 BSP thread and shapes. Weighing not less than 60 gms. |
| 93 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 94 | White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 95 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : |
| 96 | W.C. Pan with ISI marked white solid plastic seat and lid. |
| 97 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required : |
| 98 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 99 | White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. |
| 100 | Providing and fixing brass bib cock of approved quality : |
| 101 | 15 mm nominal bore. |
| 102 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 103 | 25 mm nominal bore. |
| 104 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 105 | 15 mm nominal bore. |
| 106 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : |
| 107 | 15 mm nominal bore. |
| 108 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge: Internal work - Exposed on wall: |
| 109 | 15 mm nominal outer dia pipes. |
| 110 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 111 | Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete : |
| 112 | For pipes 100 to 230 mm diameter. |
| 113 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement :1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design (Cement shall be free issue material): |
| 114 | Inside dimensions 455x610 mm and 45 cm deep for single pipe line - With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. |
| 115 | Carriage of lime, moorum, building rubbish and debris including refractory / insulation debris etc. by mechanical transport for following leads or part thereof including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge (The rates will be applicable to net quantities after deduction of 20 percent for voids): |
| 116 | Upto a lead of 1 km. |
| 117 | Lead beyond 1 km but upto 2 km. |
| 118 | Carriage of lime, moorum, building rubbish and debris including refractory / insulation debris etc. by manual labour including loading, unloading and stacking all complete as per the direction of the Engineer-in-Charge (The rates will be applicable to net quantities after deduction of 20 percent for voids): |
| 119 | Upto a lead of 50 m. |
| 120 | Every additional leads of 50 m or part thereof beyond 1st 50 m |
| 121 | Every additional leads of 50 m or part thereof beyond 1st 50 m |
| 122 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape,made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand,compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineerin-Charge: |
| 123 | 60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern. |
| 124 | Providing and applying 2.5mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour ,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. |
| 125 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge: |
| 126 | Size of Tile 600x600 mm. |
| 127 | BUNDING WITH SAND FILLED BAGS: Bunding with sand filled empty cement bags (50Kg capacity) for maintaining and diverting the flow of water, for arresting breaches or making bunds, protection walls etc.wherever required as per the direction of Engineer-in-Charge including filling sand and stitching the bags, carting to the site of work to any distance, keeping in position as directed, plugging holes, pading etc with all labour, materials, tools, plants etc. all complete. (Minimum 80% volume of bag to be filled with sand). Sand and empty cement bags to be supplied by the contractor. |
| 128 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc). |
| 129 | PLYWOOD/BLOCKBOARD: Providing and fixing of plywood / blockboard of approved make in shelves for furniture etc. with screws and fittings wherever required (Fittings to be paid separately). |
| 130 | 6MM Thick Commercial plywood- BWR Grade- IS-303 |
| 131 | 12 MM Tk Commercial plywood - BWR Grade- IS-303 |
| 132 | 18 MM Thick plywood (BWR Grade-IS-303) |
| 133 | Area indexation @ 27.77% |
| 134 | PF for line item 10 |
| 135 | PF for line item 10 |
| 136 | Non - SOR items from Past PO |
| 137 | Complete maintenance of the entire garden features having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide will be provided by the Department & lawn mover and brush cutter with fuel and other T & P material/articles shall be provided by the contractor.) and as per direction of Engineer-in-charge. |
| 138 | Play Ground/Public Parks |
| 139 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) |
| 140 | HOLES 60CM DIA AND 60CM DEEP |
| 141 | Topiary cutting/shapping of plant removing of cut materials, cleaning, hoeing of plants complete design hoeing of trees (Topiary) watering manure etc.(excluding the cost of material which shall be supplied by the department) and as per direction of Engineer-In-Charge. |
| 142 | Height of Topiary upto 120 cm. |
| 143 | Height of Topiary above 120 cm. |
| 144 | Providing and wartering |
| 145 | Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). |
| 146 | In rows 5 cm apart in both directions |
| 147 | Renovating lawns including weeding, cheeling the grass, forking the ground, top dressing with sludge or manure, mixing the same with forked soil, watering and maintaining the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing and disposal of rubbish as directed, including supplying good earth if needed but excluding the cost of sludge or manure (the good earth shall be paid for separately). |
| 148 | Supplying of earthen pot |
| 149 | 14\\" dia x 14\\" height (mejana pot ) |
| 150 | 12\\" dia x 12\\" height |
| 151 | 10'dia x 10'' height |
| 152 | 8\\" dia x 8\\" height |
| 153 | 6\\" dia x 6\\" height |
| 154 | 4\\" dia x 4\\" height |
| 155 | Manure & Fertilizer of approved quality |
| 156 | Bone Meal |
| 157 | Mustard oil cake |
| 158 | Murate of potash |
| 159 | suphola |
| 160 | Super phosphate |
| 161 | Calcium |
| 162 | Slaked lime |
| 163 | Insecticides / pesticides |
| 164 | Hamla ( 100ml } |
| 165 | Rogar( 100ml ) |
| 166 | Ustad ( 100ml ) |
| 167 | Blitox(50% WP) (500 Gm) |
| 168 | Rooting Hormone |
| 169 | Trieodorma Vanidity (100gm) |
| 170 | Metacid(50% EC) (100 ml) |
| 171 | Planofix |
| 172 | SAFF(100 gm) |
| 173 | Furadon |
| 174 | Thimate |
| 175 | String, coir rope, etc. |
| 176 | Coir rope |
| 177 | Jute string |
| 178 | Nail string |
| 179 | Supply of bamboo, khari khati, limestone |
| 180 | Bamboo 30' - 35' long of good quality |
| 181 | Khari Khati (mini. length 8' 0\\") |
| 182 | Supplying of paints etc. |
| 183 | Red oxide |
| 184 | Moss stick |
| 185 | Oasis or equivalent Floral foam brick (premium) (1 Box containing 20 bricks). |
| 186 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km (earth measured in stacks will be reduced by 20% for payment). |
| 187 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). |
| 188 | Anti termite treatment by digging holes 30 cm deep and 4 cm dia, 6 to 7 holes around the tree using chemical emulsion at the rate of 1.5 liter per hole in two time or more application to get the trees free from termite infection chemicals used Chlorpyriphos 20% EC in the ratio of 1% concentration and as per direction of engineer-in-charge. |
| 189 | Providing and applying anti termite treatment of infected trees i/c all branches/leaves by spraying chemical emulsion 0.5% (Chlorpyriphos 20% EC) concentration through power spray machine (@ 100 ml Chlorpyriphos per tree i/c cost of chemical) and as per direction of officer-in-charge.and as per direction of engineer-in-charge. |
| 190 | Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in 499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area.(two application) i/c cost of chemical)and as per direction of officer-in-charge.and as per direction of engineer-in-charge. |
| 191 | Preparation of beds for hedging and Rs.ONE HUNDRED shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm,refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 part of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, levelling etc.including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within alead of 50 m lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 192 | Uprooting weeds from the trenched area after 10 to 15 days of itsflooding with water including disposal of uprooted vegetation. |
| 193 | \\"Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling (cost of supplying earth and sludge or manure and mixing excluded).\\" |
| 194 | \\"Edging with common burnt clay F.P.S. (non modular) bricks laid drylength wise including required excavation, refilling, consolidating withhand packing and spreading neatly surplus earth within a lead of 50 m:\\" |
| 195 | 7.5 CLASS DESIGNATION |
| 196 | Hydraulic Excavator of 1 cum bucket |
| 197 | ERECTING BAMBOO SCAFFOLDING 5M UPTO 10M |
| 198 | L.P. WALLING 63 MM TH. WITH BAMBOO LATH |
| 199 | L.P. WALLING 63 MM TH. WITH BAMBOO LATH |
| 200 | LAYING 75 MM THICK BRICK SOLING |
| 201 | 25 MM THICK T&G TIMBER FLOORING |
| 202 | Digital printing on Vinyl, cutting and p |
| 203 | Painting and Slogan writing/cartoon maki |
| 204 | Horticulture Work |
| 205 | 4.2- Providing, stacking and Displaying Anemone hybrid (3 in one) variety well developed with fresh & healthy Flower in full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 206 | 4.3- Providing, stacking and Displaying Antirrhinum Hybrid Dwarf variety (3 in one) well developed with fresh & healthy Flower multi branch in full bloom in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 207 | 4.5- Providing, stacking and Displaying Antirrhinum variety, well developed, fresh & healthy multi branched 30 to 45 cm ht, in full bloom with stacking in 30 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge. |
| 208 | 4.7- Providing, stacking and Displaying Aster Hybrid variety in different colour, well developed with fresh & healthy foliage in full bloom 25 to 30 cm ht., in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-incharge. |
| 209 | 4.12- Providing, stacking and Displaying Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 210 | 4.24- Providing, stacking and Displaying Dahlia double kenya variety in different colour well developed with 3 to 4 flowers in half bloom, good foliage stacked with Green painted Bamboo sticks, 45 to 60 cm height in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 211 | 4.26- Providing, stacking and Displaying Daisy well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 212 | 4.36- Providing, stacking and Displaying Marigold jaffri dwarf in different colour well developed with fresh & healthy foliage with 12 to 15 flowers in full bloom specimen 23 to 30 cm ht. in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 213 | 4.38- Providing, stacking and Displaying Marigold jaffri french orange/yellow/ Russet colour well developed with fresh & healthy foliage with 60 to 75 flowers in bloom specimen 60 to 75 cm ht in 30 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 214 | 4.53- Providing, stacking and Displaying Phlox in different colour well developed with fresh & healthy foliage 30 cm ht., in full bloom with stacking in 25 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 215 | 4.60- Providing, stacking and Displaying Salvia dwarf variety with fresh & healthy foliage well developed multi branching in blooming stage in 15 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 216 | 10.1- Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. |
| 217 | 10.1.1- Alyssum |
| 218 | 10.1.4- Brachycome |
| 219 | 10.1.5- Calendula double |
| 220 | 10.1.10- Cineraria |
| 221 | 10.1.19- Lupine Hybrid |
| 222 | 10.1.22- Nasturtium |
| 223 | 10.1.25- Petunia Hybrid |
| 224 | RENDERING SERVICES OF MALI |
| 225 | Rendering services of mali for (Maint. Of garden, lawn etc) |
| 226 | Skilled Mali |
| 227 | PF Reimbursement Part for Skilled mali |
| 228 | Semi- skilled helper |
| 229 | PF Reimbursement for Semi-Skilled helper |
| 230 | Contractor profit @ 15% for line item 50 |
| 231 | Contractor profit @ 15% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender