Tender For Repair/ Maintenance And Replacement Of Ht Ug Cable,Ht Og Lines, Rmus, Vcbs, Gods, Transformers And Connected Items Of Mafi Project And Allied E/M Works At Af Stn Suratgarh
Tender Value
95 Lakhs
Estimated cost
Bid Submission
02 Dec 2026
21 days left
EMD
1.67 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganganagar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/ Maintenance And Replacement Of Ht Ug Cable,Ht Og Lines, Rmus, Vcbs, Gods, Transformers And Connected Items Of Mafi Project And Allied E/M Works At Af Stn Suratgarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables, erection of poles, struts, stays etc and getting out all as specified and as directed by Engr-In-Charge. |
| 2 | All as per item Srl No 1.00 here-in-before but in PCC/floor/road |
| 3 | All as per item Srl No 1.00 here-in-before but depth exceeding 1.5 metre and not exceeding 3 metre |
| 4 | Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested, poles,stays,struts have been erected and tested complete all as specified. |
| 5 | Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified. |
| 6 | Material and labour for Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine or manually without damage nearby electric cable, water pipe line etc including HDPE pipe of 100 mm dia suitable for 0.4 mpa working pressure and sealing the end of pipe complete all as specified and directed. |
| 7 | Material and labour for GI Tubing light grade 100 mm dia for cable protection in road/floor all as specified and directed |
| 8 | Supplying and laying of size 90 mm dia (OD-90 mm & ID-75 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc direct in ground (90 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 9 | Supplying and laying of size 120 mm dia (OD-120 mm & ID-103 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. Direct in ground (90 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 10 | Taking out from trenches/floors/road/wall/pipe/pole HT/ LT cable of any size/description and removing & reuse from site incl making good the disturbed surfaces to match with existing surface all as directed. |
| 11 | Relaying /Labour only for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to panel board/VCB at existing places or provided by MES for carrying to other location, up to 33000/11000 volts grade heavy duty cable with XLPE/PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed of size up to 300 sqmm 3 core obtained from item no-10 here-in-before with required aluminium cable lugs, heat shrink joints specified and directed .Note: The cable Joints and protection pipe and Earth work (if cable laying new rout ) shall be measured separately. |
| 12 | Supply, laying, jointing and testing in trenches/with pole, HT 11 KV rated XLPE insulated, PVC bedded earth system stranded aluminium conductor cable 3 core, 95 Sqmm inclusive all incoming and out-going electric connections, complete all as specified and as directed. |
| 13 | All as per item No 12 above but of size 3 core 120 sqmm |
| 14 | All as per item No 12 above but of size 3 core 150 sqmm |
| 15 | All as per item No 12 above but of size 3 core 300 sqmm |
| 16 | Supply, laying and testing in repair XLPE insulated screened PVC bedded, galvanised steel strip/ wire armoured, electric power cables (Heavy Duty) with stranded Aluminium conductor, 33 KV grade of size 3 core 300 Sqmm complete all as specified and directed including taking down old unsv cable. |
| 17 | S&F in replacement cable jointing kit for 11 KV (earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm |
| 18 | All as per item No 17 above but joint of size120 to 185 sqmm |
| 19 | All as per item No 17 above but joint of size 240 to 300 sqmm |
| 20 | S&F in replacement cable jointing kit for 11 KV (earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm |
| 21 | All as per item No 20 above but joint of size 120 to 185 sqmm |
| 22 | All as per item No 20 above but joint of size 240 to 300 sqmm |
| 23 | S&F in replacement cable jointing kit for 11 KV (earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm |
| 24 | All as per item No 23 above but straight through joint of size 120 to 185 sqmm |
| 25 | All as per item No 23 above but straight through joint of size 240 to 300 sqmm |
| 26 | S&F in replacement cable end termination, outdoor, heat shrinkable type joint complete with jointing material and accessories suitable for 33 KV, 3 core 300 sqmm, XLPE armoured aluminium conductor cable complete all as specified and directed. |
| 27 | All as per item No 26 above but indoor type joint |
| 28 | All as per item No 26 above but straight through type joint |
| 29 | Supply and fixing cable route indicator for HT UG cable of 11000 Volts bolted with 40x6mm flat iron member of height 0.90m and 80mm dia CI plate, embedded in PCC 1:3:6 type C-2 of size 20cm x20cm x30cm block complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Supply and fixing pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut 150mm height, 150mm dia for working pressure 11000 Volts grade of HT line including taking down existing cracked/unserviceable pin type insulator complete all as specified and directed. |
| 31 | Supply and fixing in replacement pin type, porcelain, vitreous, white, brown or green insulator/polymer including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, for 33KV grade complete incl taking down old/unsv all as specified and directed. |
| 32 | Supply and fixing of disc type insulators, porcelain vitreous white brown or green, 145mm hight and 255mm dia ball and socket type, single disc assembly for tension with tension clamps for conductor having working pressure 120 KN for 11000 Volts /33000 volts (use suitable string ) with highest voltage capacity 12 KV including taking down existing cracked/unserviceable disc type insulator complete all as specified and directed. |
| 33 | Taking down old U/S GO switch any type and size from HT 2/4 poles structures. |
| 34 | Supply and fixing of Gang operated switch outdoor type 11000 Volts, 200 Amp capacity triple pole mechanically operated suitable for operation from ground level and for vertical mounting complete with HT insulators 9 Nos., channel, knife blades, GI pipe medium grade 25 mm dia for operating mechanism worked from ground level , locking arrangement with handle all as specified. |
| 35 | Supply and fixing of Gang operated switch outdoor type 11000 Volts, 400 Amp capacity triple pole machenically operated suitable for operation from ground level and for vertical mounting complete with HT insulators 12 Nos. with dropout fuse set, channel, knife blades, GI pipe medium grade 40 mm dia for operating mechanism worked from ground level , locking arrangement with handle all as specified. |
| 36 | All as per item No 35 but 33 KV 400 Amp, operating horizontal direction incl taking down old/unsv all as specified and directed |
| 37 | Supply and fixing in replacement expulsion fuse unit single pole mounted on insulator & steel frame complete with fused barrel (drop out fuse) suitable for 11 KV for current rating up to 20 Amp incl taking down old/unsv fuse unit complete all as specified and directed. |
| 38 | Supply and fixing in replacement HT 33 KV outdoor type dropout fuses double stack channel type complete with insulator of rating up to 400 Amps incl taking down old/unsv complete all as specified and directed. |
| 39 | Repairing / Servicing the Air break isolating switch HT 11 KV 200/400 Amps by replacing the defective major spares parts including provn of minor bolts nuts etc all as specified and directed.Note :- Major spare parts will be measured & paid separately |
| 40 | Supply only Male contact/moving Contact Blade |
| 41 | Supply only Female contact/Fix Contact Jaw |
| 42 | Supply only Tinned copper Flexible jumper 200A/400 A |
| 43 | Supply only MS jumper carrier |
| 44 | Supply only Back Connector plate |
| 45 | Supply only Petroleum Jelly |
| 46 | Dismantling / Taking down old unserviceable lightning arrestor 11 KV from HT 2/4 poles structures. |
| 47 | Material and labour for HT 11 KV lightening arrestor expulsion type having discharge capacity of 65 KA, suitable for 11 KV HT line including making connection with existing GI earth wire. |
| 48 | Supply & fixing of lightning arrestors expulsion type complete with all fittings, suitable for 33 KV grade transmission class, discharge capacity 65KA including brackets, clamps, nuts washers and connecting to 4 mm dia GI earth wire including taking out old unserviceable lightening arrester all complete all as specified and directed. |
| 49 | Supply and fixing of Jumper for HT OH Lines 33/11 KV bus system to GOD and GOD to DO Fuse unit with jumper made of aluminium conductor insulated with colour coding, (Red Green , Blue) with all connected item i.e. nut bolt, U G clamps etc up to length of size 3 to 5 Mtr all as specified and directed by Engr -in-charge. |
| 50 | Dismantling concrete poles/Struts/steel pole from structure of any size complete all as specified and directed. |
| 51 | Demolition of concrete (coping of PCC/GI pole/Road) of any description and in any position. |
| 52 | Supply and erecting in true vertical position steel tubular swaged pole, 11 metre long, complete with mild steel base plate 6mm thick of size 300mm x 300mm, B-118 finial taper plug, bolts, nuts, washers and screws, type 410 SP-55 including drilling of holes of required size and nuts for fixing of cross arms, painting with two coats of aluminium paint over a coat of red oxide and two coats of black bituminous paint for portion embedded in concrete, painting five black and white bands at lower portion of pole each of 300 mm height at 300mm spacing complete all as specified and directed. (Note : Excavation, earth work and PCC in foundation of poles, coping etc shall be measured and paid separately under respective items of Sch 'A'). |
| 53 | Material and labour for PCC 1:2:4 (nominal mix) type B-2 using 40mm graded crushed stone aggregate, as in coping of poles and the like complete including weathering, slightly rounded or chamfered angles and throating all as specified and directed. |
| 54 | Material and labour for PCC 1:3:6 (nominal mix) type C-2 using 40mm graded crushed stone aggregates, as in foundation filling and mass concrete for poles and stay/installation paths complete all as specified and directed. |
| 55 | Material and labour for PCC 1:2:4 type B1 using 20mm graded aggregate in coping of size (0.65x0.55x0.45) Mtr for PCC/RCC/Steel tubular pole complete with 10mm thick cement plaster CM 1:4 on coping surface complete all as specified and directed. |
| 56 | Material and labour for scrapping of old painted surfaces of electric pole covered by dust and other deposited materials by cleaning with wire cup brush on drill /grinder from steel tubular pole of length from 8 mtr to up to 11 metres including cross arms, bracing, clamps etc and painting with one coat of Epoxy zinc phosphate primer and including two coats of synthetic enamel paint up to 1.50 mtr height having alternative existing strip (white and black or Red and yellow ) of 30 cm height each, Existing pole Nos will be written on pole by black paint in yellow circle of 150 mm dia complete all as specified and directed. |
| 57 | Material and labour for scrapping existing deteriorated complete removal of old paint by with wire cup brush on drill /grinder from the steel tubular 2 pole structure of 9.0-11.0 mtr height above ground level without removing accessories and preparation of surfaces for repainting the poles with and including two coats of synthetic enamel paint up to 1.50 mtr height having alternative existing strip (white and black or Red and yellow ) of 30 cm height each, including one coat of Epoxy zinc phosphate primer to the remaining part of pole (i.e. above 1.50 mtr height) and its cross arms, bracing, support and all steel members, Existing pole Nos will be written on pole by black paint in yellow circle of 150 mm dia complete all as specified and directed. |
| 58 | All as per Ser item No. 57 herein above but for 4 pole structure. |
| 59 | All as per Ser item No.57 herein above but for 6 pole structure. |
| 60 | Dismantling ACSR or AAC conductor complete all as specified and directed. |
| 61 | Supply and fixing of aluminium conductor, steel reinforced (ACSR) of following sizes as in overhead conductor including fixing aluminium tapes for binding complete all as specified and directed: -(a) 6/1 x 3.0 - Ferret (b) 6/1 x 2.59 - Weasel (c) 6/1 x 2.11 - Squirrel Note: The weight of the conductor shall be determined as stipulated in Preamble (b) & (c) on Page 384 of SSR-2010 Part-II (Rates). |
| 62 | Material and labour for Stringing of ACSR conductor any size to HT/LT over heads lines, stretching properly to achieve proper sag including binding to insulators using GI/aluminium binding wire all as specified and as directed by Engineer-in-Charge. |
| 63 | Material and labour for Stringing of GI cradle Guarded conductor any size to HT/LT over heads lines, stretching properly to achieve proper sag including binding to insulators using GI/aluminium binding wire all as specified and as directed by Engineer-in-Charge. |
| 64 | Material and labour for restraining of GI wire of any size on pole after disconnecting all binding on cross arms and redoing all bindings providing required T&P all as specified and directed |
| 65 | Supply and fixing of 33 KV/ 11 kV HT Overhead (OH) Line Spacer/Separator, made of UV-stabilized FRP/polymeric body with hot-dip galvanized steel clamping arrangement, suitable forACSR conductors (Weasel/Dog size ), including nuts, bolts, washers, all accessories, mounting on existing HT overhead line, proper tightening, alignment and testing complete, all as specified and directed by Engineer-in-Charge. |
| 66 | Surface excavation over the areas around the substations not exceeding 45 cm depth and averaging 30 cm deep and getting out spoil in hard & dense soil including levelling the surface. |
| 67 | Material and labour for screened river sand, filling on the levelled ground surface/ducts in sub stations/below 2 pole & 4 pole structures etc |
| 68 | Material and labour for stone aggregate of size 35 to 40mm spreading over sand layer in the substation areas including proper levelling all as directed and shown at site. |
| 69 | Material and labour for stone aggregate of size 20 to 25 mm spreading over sand layer in the sub stations areas including proper levelling all as directed . |
| 70 | M&L taking out spreaded aggregate of any size & sieving the aggregate & dust/ sand & relaying the aggregate after sieving in the sub stations |
| 71 | Material and labour for brick work with sub class B brick straight cured on plan exc 6m mean radius built in Cement mortar 1:4 |
| 72 | Rendering/cement plastering 15mm thick on fair faces of brick work or concrete surfaces in Cement mortar 1:4 finished even and smooth without using extra cement. |
| 73 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk),forming holes of Fe 410-W (Gde E- 250) quality without any attachment use for cable duct cover at substn complete all as directed. |
| 74 | Material and labour for fixing of display Board of 60cmx30cm for earth pit made out of 2 mm thick MS sheet welded on angle iron legs 0.75 mtr long (02Nos) of size 40x40x6mm duly embedded in PCC block 1:2:4, type B-1, using graded crushed stone aggregate, of size 23x23x30cm fixed in ground including necessary earthwork. Display Board shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in- Charge. The following is to be written on the board:- a) Earth Pit No. - b)Connected To - c) Checked on -d) Next due date.-e) Ohmic Value |
| 75 | Cutting and uprooting grass, vegetation shrubs, bushwood undergrowth, roots and trees not exceeding 30 cm girth (measure one metre above ground level) in and around electrical sub stations, two/four pole structures and removing rubbish to a distance up to 50 metres outside the periphery of the area, complete all as specified and as directed by Engr-in-Charge. |
| 76 | Supply and fixing of synthetic insulating mat suitable for 11 KV installation of size 1.00 m x 2.00 m and 25mm thick (ISI marked) complete all as specified and directed. |
| 77 | Supply and fixing of Earthing discharge rod (ISI Marked), extendable up to 18 feet height with rubber hand grip and suitable size copper wire suitable for working with 11 KV HT lines complete all as specified and directed. |
| 78 | Supply and fixing of Aluminium thimble/lugs suitable for 50 sqmm to 95 sqmm XLPE cable all as specified and directed. |
| 79 | Supply and fixing of Aluminium thimble/lugs suitable for 120 sqmm to 185 sqmm XLPE cable all as specified and directed. Please Enable Macros to View BoQ information |
| 80 | Supply and fixing of Aluminium thimble/lugs suitable for 120 sqmm to 185 sqmm XLPE cable all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedDec 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysDec 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender