Tender For Renovation Of Toilet In Block-B Govt. Model Sr. Sec. School Sector-38 (West) Dmc, Chandigarh. (Ibm No. W1/2026/26390).
Tender Value
59.53 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
4 days left
EMD
1.19 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Toilet In Block-B Govt. Model Sr. Sec. School Sector-38 (West) Dmc, Chandigarh. (Ibm No. W1/2026/26390).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : |
| 4 | All kinds of soil |
| 5 | Pipes, cables etc, not exceeding 80 mm dia. |
| 6 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. |
| 7 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 8 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 10 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 11 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 12 | Suspended floors, roofs, landings, balconies and access platform. |
| 13 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 14 | Cold twisted bars |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 16 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 18 | Cement mortar 1:3 (1 cement :3 coarse sand) |
| 19 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 20 | Granite stone slab of colour black, Cherry/Ruby red |
| 21 | Area of slab over 0.50 sqm |
| 22 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 23 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 24 | 250x16 mm |
| 25 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 26 | 150x10 mm |
| 27 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete |
| 28 | 100 mm |
| 29 | Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: |
| 30 | Profile B |
| 31 | Fixing with adjustable lugs with split end tail to each jamb |
| 32 | Profile E |
| 33 | Fixing with adjustable lugs with split end tail to each jamb |
| 34 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 35 | Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent |
| 36 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 37 | 1:3 (1 cement: 3 fine sand) |
| 38 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 39 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
| 40 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 41 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 42 | Two coats |
| 43 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 44 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge |
| 45 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 46 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 47 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 48 | Of area 3 sq. metres and below |
| 49 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 50 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 51 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 52 | W.C. pan with ISI marked white solid plastic seat and lid |
| 53 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 54 | Orissa pattern W.C. pan of size 580x440 mm |
| 55 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 56 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 57 | 10 litre (full flush) capacity-white |
| 58 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 59 | Flexible pipe |
| 60 | 32 mm dia |
| 61 | Providing and fixing soil, waste and vent pipes : |
| 62 | 100 mm diameter : |
| 63 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 64 | 75 mm diameter : |
| 65 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 66 | Providing and fixing heel rest sanitary bend |
| 67 | 100 mm dia |
| 68 | Sand cast iron S&S as per IS - 3989 |
| 69 | 75 mm |
| 70 | Sand cast iron S&S as per IS - 3989 |
| 71 | Providing and fixing single equal plain junction of required degree : |
| 72 | 100 mm dia |
| 73 | Sand cast iron S&S as per IS - 3989 |
| 74 | 75 mm |
| 75 | Sand cast iron S&S as per IS - 3989 |
| 76 | Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : |
| 77 | 100 mm dia |
| 78 | Sand cast iron S&S as per IS - 3989 |
| 79 | 75 mm |
| 80 | Sand cast iron S&S as per IS - 3989 |
| 81 | Providing and fixing terminal guard: |
| 82 | 100 mm dia |
| 83 | Sand cast iron S&S as per IS - 3989 |
| 84 | 75 mm |
| 85 | Sand cast iron S&S as per IS - 3989 |
| 86 | Providing and fixing collar : |
| 87 | 100 mm |
| 88 | Sand cast iron S&S as per IS - 3989 |
| 89 | 75 mm |
| 90 | Sand cast iron S&S as per IS - 3989 |
| 91 | Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : |
| 92 | 100 mm |
| 93 | 75 mm |
| 94 | Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : |
| 95 | 100 mm |
| 96 | 75 mm |
| 97 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 98 | 100 mm inlet and 75 mm outlet |
| 99 | Sand Cast Iron S&S as per IS- 1729 |
| 100 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 101 | Internal work - Exposed on wall |
| 102 | 25 mm dia nominal bore |
| 103 | 32 mm dia nominal bore |
| 104 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 105 | 15 mm dia nominal bore |
| 106 | 20 mm dia nominal bore |
| 107 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 108 | 20 mm nominal bore |
| 109 | 25 mm nominal bore |
| 110 | 32 mm nominal bore |
| 111 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 112 | 25 mm dia nominal bore |
| 113 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 114 | 45 cm length |
| 115 | 15 mm nominal bore |
| 116 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : |
| 117 | 25 mm dia nominal bore |
| 118 | 32 mm dia nominal bore |
| 119 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 120 | 15 mm nominal bore |
| 121 | 20 mm nominal bore |
| 122 | 25 mm nominal bore |
| 123 | 32 mm nominal bore |
| 124 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 125 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 126 | 15 mm nominal bore |
| 127 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 128 | 15 mm nominal bore |
| 129 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 130 | With common burnt clay F.P.S. (non modular) bricks |
| 131 | Cutting holes up to 15x15cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof. |
| 132 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design |
| 133 | 100x100 mm size P type |
| 134 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 135 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: |
| 136 | Inside dimensions 600 x 850 mm and 45 cm deep for pipe line with three or more inlets : |
| 137 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 138 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : |
| 139 | (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.(The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.) |
| 140 | Providing and fixing HCI P-Trap.100 mm dia complete |
| 141 | Providing and fixing ISI Marked water proof 30 mm thick flush door shutters of pine frame sesoned and treated with seasoned pine filler and 2.5 mm gurjan core, fungus resistant, eco friendly with 1mm thick laminated on both side with phenol formaldehyde resin conforming to IS: 848; complete in all respect. |
| 142 | Removal of cinder from depressed portion including stacking outside and refilling after drying complete as per site. |
| 143 | Dismentaling glazed wall tiles including plaster and disposal of malba away from site complete in all respect. |
| 144 | Providing and Fixing of drinking water cooler with storage capacity 400 ltr. (+/- 10%) have cooling cap 150 to 225 LPH. Full body stainless steel including storage tank SS grade refrigerant R-134A/R-32 complete in all respect conforming to IS 1475 Part-1 with upto dated amendments. Make:- Blue Star/Sidwal/Voltas/Climatrol. |
| 145 | Providing and Fixing of Voltage Stabilizers with Nominal output-230 Volts±10% complete in all respects Make Deol or Jewel, Volts, V-guard. |
| 146 | 5 KVA capcity |
| 147 | P/F of Hi Flow water Filter-cum-Purifier including installation charges 3 Ltr/Minute. Make Aqua guard /Kent/ Usha/Pure-it |
| 148 | Providing and fixing SS long bend complete in all respect |
| 149 | Providing and fixing in position best indian Make C.P.Cup heavy Duty Complete in all respects.(minimum weight 15 gm) complete in all respects. (As desired by EIC) |
| 150 | Dismantling of C.I pipe upto 150 mm dia. And taking out the pipes,manually or mechanical means including stacking of pipes with in 50m lead and reconditioning the surface as per direction of EIC as per requirement |
| 151 | Dismantling of G.I pipe upto 50 mm dia. And taking out the pipes manually or mechanical means including stacking of pipes with in 50m lead and reconditioning the surface as per direction of EIC as per requirement |
| 152 | Providing and fixing of Standard Urinal size 375x390x590 mm snow white Pastel. complete in all respect make as approved by EIC.Make cera or equivalent make in the same range of AOR |
| 153 | Providing and fixing Glass urinal partition complete in all respect.make jaqur |
| 154 | Providing and fixing CP Brass Pressmatic Auto Close Urinal type push Cock complete in all respect make as approved by EIC. Make Jaquar PRS-043 or equivalent make in the same range of AOR |
| 155 | Providing and fixing C.P. brass Push cock of approved quality conforming to IS: 8931 15 mm nominal bore |
| 156 | Construction of curb of cement concrete 1:2:4 with PVC pipe 4\\" 6 kg pressure per CM2 upto average length of 1' including cost of CP Grattings ,sands, bajri etc. |
| 157 | Providing and fixing 2 HP Single phase Centrifugal Monoblock Pump MBN22-1 Complete in all respect Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender