Tender For Annual Operation, Maintenance And Providing Facility Management Service For Rohini Residential Complex At Ultadanga, Kolkata-700054 (For Two Years)
Tender Value
3.78 Crore
Estimated cost
Bid Submission
25 Nov 2026
17 days left
EMD
4.73 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Operation, Maintenance And Providing Facility Management Service For Rohini Residential Complex At Ultadanga, Kolkata-700054 (For Two Years)
BOQ
| Sl. No. | Item Description |
| 1 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:3:6 (1 Cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 3 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor,etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement : 3 coarse sand (zone-III) : 6 graded stone aggregate 20 mm nominal size) |
| 4 | Providing, hoisting and fixing up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 5 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe 500D or more |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1cement : 6coarse sand) |
| 7 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1cement : 6 coarse sand) |
| 8 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : cement mortar 1:4 (1cement : 4coarse sand) |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1cement : 4coarse sand) |
| 10 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/ Ruby red: Area of slab upto 0.50 sqm |
| 11 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/ Ruby red: Area of slab over 0.50 sqm |
| 12 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Sal wood |
| 14 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 15 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 16 | Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. |
| 17 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture . M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters |
| 18 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick |
| 19 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. With 12 mm mild steel U beading |
| 20 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece. |
| 21 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 23 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 24 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 25 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. |
| 26 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm |
| 27 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately). Size of Tile 600x600 mm |
| 28 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) |
| 29 | 20 mm cement plaster of mix : 1:4 (1cement : 4fine sand) |
| 30 | 12 mm cement plaster of mix : 1:6 (1cement: 6 coarse sand) |
| 31 | Neat cement punning |
| 32 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) |
| 33 | Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 34 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work |
| 35 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 36 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 37 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat |
| 38 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats |
| 39 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre |
| 40 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 41 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 42 | French spirit polishing : One or more coats on old work |
| 43 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area .5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead : With cement mortar 1:4 (1cement : 4fine sand) |
| 44 | Cleaning of terrace/loft water storage tank (inside surface area) at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 45 | Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
| 46 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 47 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 48 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar |
| 49 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 50 | Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 51 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 52 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 53 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 54 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 55 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 56 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 57 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall : 15 mm dia nominal bore |
| 58 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall : 20 mm dia nominal bore |
| 59 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 40 mm dia nominal bore |
| 60 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 50 mm dia nominal bore |
| 61 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore |
| 62 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 63 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 64 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness |
| 65 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness |
| 66 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 67 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 68 | Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge: 50mm average thickness |
| 69 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter |
| 70 | Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars above 12 mm diameter |
| 71 | Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make |
| 72 | Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 05 k.m. lead complete (Cattle manure measured in stacks will reduced by 8% for Payment). |
| 73 | Providing and Displaying Aster Hybrid variety in different colour, well developed with fresh & healthy foliage in full bloom 23 to 30 cm ht., in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 74 | Providing and Displaying Calendula double variety well developed with fresh & healthy foliage in full bloom in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 75 | Providing and Displaying Chrysanthemum double variety, well developed, having 45 to 60 cm ht., with 6 and above flowers with half blooming condition, fresh and healthy with bamboo stacking in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 76 | Providing and Displaying Chrysanthemum single variety in different colour well developed having 45 to 60 cm ht., minimum 100 and above half bloom flowers open well stacked with bamboo stick having three layer tiding by thread fresh and healthy foliage in 25 cm Earthen Pot and as per direction of the officer-in-charge. |
| 77 | Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Chrysanthemum double |
| 78 | Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Dahlia double |
| 79 | Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold French Hybrid dwarf |
| 80 | Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Marigold Inca hybrid |
| 81 | Providing and stacking of winter seasonal flowers seedling/cutting at site of work well developed and healthy free from disease in tray and each tray having 100 Nos plants as per direction of the officer-in-charge. Petunia hybrid |
| 82 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Balsam |
| 83 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Cosmos hybrid |
| 84 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Kochia |
| 85 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Sunflower Dwarf |
| 86 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Vinca hybrid |
| 87 | Providing and stacking of summer & rainy seasonal flower seedling at site of work well developed and healthy free from disease in tray and each tray having 100 Nos. plants as per direction of the officer-in-charge. Zinnia hybrid |
| 88 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 Meter long etc. with charcoal/ coke and salt as required. |
| 89 | Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 90 | Repairing of existing steel shutter by removing damaged portion & providing and fixing 1 mm thick M.S. sheet including M.S. angle, flat etc. if required all complete, including applying a priming coat of approved steel primer. |
| 91 | Cleaning and desilting of Inspection chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-incharge. |
| 92 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge. 4 storied building |
| 93 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge. 6 storied building |
| 94 | Making one set of scaffolding only for replacing glass panels, painting, uprooting plant and another repairing works of building and S&P works for external works only with 10 cm. dia bamboo as main posts at the rate of 1 metre centre to centre and 7.5 cm. dia bamboo ties @ 0.75 metre apart fitting and fixing with necessary coir, nails etc. as per direction of the Engineer-in-charge. 12 storied building |
| 95 | Cleaning of blockage of CI floor trap as per instruction of EIC. |
| 96 | Supplying 50 mm bright finished brass cup board or wardrobe knob of approved quality. |
| 97 | Supplying Stainless steel SS grade 304, curtain rod 20 mm dia 1.20 mm thick |
| 98 | Supplying Stainless steel SS grade 304, brackets (curtain rod) 20 mm dia 1.20 mm thick |
| 99 | Supplying Chromium plated Brass screws 50 mm. |
| 100 | Supplying Chromium plated Brass screws 40 mm. |
| 101 | Supplying Chromium plated Brass screws 30 mm. |
| 102 | Supplying Chromium plated Brass screws 25 mm. |
| 103 | Supplying M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating Overall width 35 mm |
| 104 | Supplying oxidised M.S. hasp and staple (safety type) conforming to IS : 363: 115 mm |
| 105 | Supplying M.S. hasp and staple (safety type) conforming to IS : 363: 90 mm |
| 106 | Supplying aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts etc. complete : 250x16 mm |
| 107 | Supplying aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, etc. complete : 200x10 mm |
| 108 | Supplying aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, complete : 150x10 mm |
| 109 | Supplying aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, complete : 100x10 mm |
| 110 | Supplying aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 111 | Supplying aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, complete : 100 mm |
| 112 | Supplying aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 75 mm |
| 113 | Supplying C.I. bracket for wash basin and sinks. |
| 114 | Supplying C.P. brass chain with 40 mm rubber plug |
| 115 | Supplying 100 mm sand cast Iron grating for gully trap. |
| 116 | Supplying Rubber insertions for 100 mm dia pipe joints |
| 117 | Supplying Rubber insertions for 150 mm dia pipe joints |
| 118 | Supplying 600x450 mm beveled edge mirror of superior glass (of approved quality). |
| 119 | Supplying G.I. Union 15 mm nominal bore |
| 120 | Supplying G.I. Union 20 mm nominal bore |
| 121 | Supplying G.I. Union 40 mm nominal bore |
| 122 | Supplying G.I. Union 50 mm nominal bore |
| 123 | Supplying uplasticised PVC connection pipe with brass unions : 45 cm length : 15 mm nominal bore |
| 124 | Supplying solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid |
| 125 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
| 126 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 127 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore |
| 128 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore |
| 129 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 65 mm nominal bore |
| 130 | Supplying gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore |
| 131 | Supplying C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : 100 mm diameter : Class I |
| 132 | Supplying C.I. sluice valves (with cap) complete 150 mm diameter : Class I |
| 133 | Supplying 32 mm C.P. brass waste of approved brand & make. |
| 134 | Supplying 40 mm C.P. brass waste of approved brand & make. |
| 135 | Supplying Bolts and nuts 16 mm dia 60 mm long |
| 136 | Supplying Bolts and nuts 20 mm dia 65 mm long. |
| 137 | Supplying special quality bright finished brass cupboard or ward robe locks with four levers of approved quality: 65 mm |
| 138 | Supplying bright finished brass hanging type floor door stopper: 150 mm |
| 139 | Supplying new wooden fillets: Hollock wood fillets |
| 140 | Supplying 4 mm thick ACP |
| 141 | Supplying GI/Aluminium Sheet (0.8 mm thick) |
| 142 | Supplying 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete. |
| 143 | Supplying White Vitreous China flat back Wash basin size 550x400 mm of approved brand & make. |
| 144 | Supplying of Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/Chowkhat of frame size 50 x 100 mm |
| 145 | Supplying Rawl plug 50 mm (designation 10 no). |
| 146 | Supplying aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories. |
| 147 | Supplying Stainless Steel AISI 304 (18/8) kitchen sink as per IS : 13983 without drain board 610x460 mm bowl depth 200 mm |
| 148 | Supplying Hard board 6 mm thick (of approved quality). |
| 149 | Supplying P.V.C. waste pipe for sink or wash basin: Flexible pipe 32 mm dia |
| 150 | Supplying P.V.C. waste pipe for sink or wash basin: Flexible pipe 40 mm dia |
| 151 | Supplying oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not less than 450 gms). |
| 152 | Supplying uPVC pipes (working pressure 4 kg / cm²) Single socketed pipe 110 mm dia |
| 153 | Supplying uPVC coupler for UPVC drainage pipes 110 mm |
| 154 | Supplying uPVC single equal Tee (without door) 110x110x110 mm |
| 155 | Supplying uPVC single equal Tee (with door) 110x110x110 mm |
| 156 | Supplying uPVC bend 87.5° 110 mm bend |
| 157 | Supplying uPVC plain shoe 110 mm bend |
| 158 | Supplying uPVC pipe clip 110 mm |
| 159 | Supplying C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 160 | Supplying C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 161 | Supplying C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 162 | Supplying C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15 mm nominal bore 15mm nominal bore |
| 163 | Supplying P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White |
| 164 | Supplying draining board White glazed fire clay draining board of size 600x450x25 mm |
| 165 | Supplying PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 15 mm nominal bore, 105 mm long, weighing not less than 138 gms |
| 166 | Supplying PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long, weighing not less than 198 gms |
| 167 | Supplying PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 168 | Supplying PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 169 | Supplying PTMT towel rail complete with brackets of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms |
| 170 | Supplying Stainless steel screws 50 mm |
| 171 | Supplying Stainless steel screws 40 mm |
| 172 | Supplying Stainless steel screws 30 mm |
| 173 | Supplying Stainless steel screws 20 mm |
| 174 | Supplying IS : 12817 marked stainless steel butt hinges (heavy weight): 100x60x2.50 mm |
| 175 | Supplying IS : 12817 marked stainless steel butt hinges (heavy weight): 75x50x2.50 mm |
| 176 | Supplying CPVC pipes 15 mm dia nominal bore. |
| 177 | Supplying CPVC pipes 20 mm dia nominal bore. |
| 178 | Supplying CPVC pipes 40 mm dia nominal bore. |
| 179 | Supplying CPVC pipes 50 mm dia nominal bore. |
| 180 | Supplying magnetic catcher of approved quality: Double strip (horizontal type). |
| 181 | Supplying 2nd class teak wood lipping/ moulded beading or taj beading of size 18x5 mm. |
| 182 | Supplying of Polythene ball of approved quality for pipe of dia.: 25mm |
| 183 | Supplying of Low-down cistern parts: Knob of approved brand and make. |
| 184 | Supplying of Low-down cistern parts: Rubber Kid of approved brand and make. |
| 185 | Supplying of Low-down cistern parts: Internal fittings for cistern complete of approved brand and make. |
| 186 | Supplying of C.P. hinges of W.C. seat of of approved brand and make. |
| 187 | Supplying of Brass spindle and valve of stop cock/bib cock/push cock/pillar cock: 15 mm of approved brand and make. |
| 188 | Supplying of Chromium plated round shower with revolving joint (Equivalent to Code No. 541(N) & Model - Tropical/ Sumthing Special of ESSCO or similar brand). |
| 189 | Supplying wash basin screw set of size 10x120 mm. |
| 190 | Supplying ESSCO (Model No. DLX-507KN) or equivalent Pillar cock Rocket Type with Aerator . |
| 191 | Supplying of Asbestos diamond gland packing 10 mm square of approved brand and make. |
| 192 | Supplying Galvanised iron socket with I.S.I. mark of approved brand and make: 15 mm dia |
| 193 | Supplying Galvanised iron socket with I.S.I. mark of approved brand and make: 20 mm dia |
| 194 | Supplying Galvanised iron socket with I.S.I. mark of approved brand and make: 40 mm dia |
| 195 | Supplying Galvanised iron socket with I.S.I. mark of approved brand and make: 50 mm dia |
| 196 | Supplying G.I. plug of approved brand and make: 15 mm dia |
| 197 | Supplying G.I. plug of approved brand and make: 20 mm dia |
| 198 | Supplying G.I. plug of approved brand and make: 40 mm dia |
| 199 | Supplying G.I. plug of approved brand and make: 50 mm dia |
| 200 | Supplying G.I. reducing socket with I.S.I. mark of approved brand and make: 20 mm dia |
| 201 | Supplying G.I. reducing socket with I.S.I. mark of approved brand and make: 50 mm dia |
| 202 | Supplying G.I. bend of approved brand and make: 15 mm dia |
| 203 | Supplying G.I. bend of approved brand and make: 20 mm dia |
| 204 | Supplying G.I. bend of approved brand and make: 40 mm dia |
| 205 | Supplying G.I. bend of approved brand and make: 50 mm dia |
| 206 | Supplying G.I. plain equal elbow of approved brand and make: 15 mm dia |
| 207 | Supplying G.I. plain equal elbow of approved brand and make: 20 mm dia |
| 208 | Supplying G.I. plain equal elbow of approved brand and make: 40 mm dia |
| 209 | Supplying G.I. plain equal elbow of approved brand and make: 50 mm dia |
| 210 | Supplying G.I. plain tee of approved brand and make: 15 mm dia |
| 211 | Supplying G.I. plain tee of approved brand and make: 20 mm dia |
| 212 | Supplying G.I. plain tee of approved brand and make: 40 mm dia |
| 213 | Supplying G.I. plain tee of approved brand and make: 50 mm dia |
| 214 | Supplying G.I. nipple standard 50 mm long of approved brand and make: 15 mm dia |
| 215 | Supplying G.I. nipple standard 50 mm long of approved brand and make: 20 mm dia |
| 216 | Supplying G.I. nipple standard 50 mm long of approved brand and make: 40 mm dia |
| 217 | Supplying G.I. nipple standard 50 mm long of approved brand and make: 50 mm dia |
| 218 | Supplying Long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut: 15 mm dia |
| 219 | Supplying Long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut: 20 mm dia |
| 220 | Supplying Long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut: 40 mm dia |
| 221 | Supplying Long screw (150 mm long) of TATA make with sockets (TATA make) and jamnut: 50 mm dia |
| 222 | Supplying G.I. short piece of TATA make (Above 50mm & upto150 mm long): 15 mm dia |
| 223 | Supplying G.I. short piece of TATA make (Above 50mm & upto150 mm long): 20 mm dia |
| 224 | Supplying G.I. short piece of TATA make (Above 50mm & upto150 mm long): 40 mm dia |
| 225 | Supplying G.I. short piece of TATA make (Above 50mm & upto150 mm long): 50 mm dia |
| 226 | Supplying C.I. clamp for 20 mm nominal bore pipe. |
| 227 | Supplying 6 mm BWP ply of approved brand & make. |
| 228 | Supplying 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe |
| 229 | Supplying fittings for uPVC pipes (B Type) conforming to IS-13592-1992: Door Bend: 110 mm |
| 230 | Supplying fittings for uPVC pipes (B Type) conforming to IS-13592-1992: Vent Cowl 110 mm |
| 231 | Supplying fittings for uPVC pipes (B Type) conforming to IS-13592-1992: W.C. Connector (150 mm long) 125 X 110(W/WC Ring): 75 mm |
| 232 | Supplying fittings for uPVC pipes (B Type) conforming to IS-13592-1992: 125/110 P Trap with W.C. Ring: 75 mm |
| 233 | Supplying fittings for uPVC pipes (B Type) conforming to IS-13592-1992: 125/110 S Trap with W.C. Ring |
| 234 | Supplying ESSCO (Model No. DLX-507KN) or equivalent Pillar cock Rocket Type with Aerator. |
| 235 | Supplying Leather washer of steet hydrant 50 mm. |
| 236 | Supplying 19 mm thick BWP Block board conforming to I.S. 1659-1990 of approved brand & make. |
| 237 | Supplying 125 mm dia acrylic handle for aluminium door as per approved make and brand. Natural colour |
| 238 | Supplying Metallic magic eye of approved quality. |
| 239 | Supplying of Godrej make Mortice lock 6 levers Chromium plated with handles & keys. |
| 240 | Providing and fixing fly/mosquito proof nylon net on any type of window, door shutter frame with necessary fixing arrangements complete. |
| 241 | Supplying of 75 mm PVC buffer for door shutter. |
| 242 | Supplying PVC Cap 50 mm for holes of commode of approved brand & make. |
| 243 | Supplying ESSCO (MODEL No. ALE-CHR-593) or equivalent Hand Shower (Health Faucet) (ABS Body) with 8 mm dia, 1 Meter Long Flexible Tube & Wall Hook |
| 244 | Supplying Plastic threaded socket for holding pelmet rod of 20 mm dia |
| 245 | Supplying PVC curtain ring 32/ 40 mm inner dia. |
| 246 | Supplying Wooden bead of Gamhar wood 20 mmx 20 mm size. |
| 247 | Supplying Decorative wooden handle 100 mm grip. |
| 248 | House Keeping works: Supplying materials for House Keeping and upkeepment of Rohini Housing Complex including Single Room Guest House, as per the direction of the department.R2 Hard Surface Cleaner (2 litre per month), Lizol 500 ml pack (20 Nos. per month), Colin 750 ml pack (2 Nos. per month), R4 Wooden Polish (1 litre per month), Phenyl (20 litre per month), Bleaching powder (26 kg per month), R6 (5 litre per month), Harpic 500 ml pack (12 Nos. per month), D7 SS Polish (2 litre per month), Scrub Pad - Scotch brite (Size 3 inch X 4 inch) (10 packets per month), Rubber Hand Gloves (3 pair per month), Odonil Big 50 gram pack (30 packets per month), Round Mop Refil (30 Nos. per month), Soft Broom (14 Nos. per month), Stick Broom (8 Nos. per month), Grass Broom (4 Nos. per month), Scrubbing Brush (Nylon) (2 Nos. per month), Flannel Duster (2 Nos. per month), Garbage Bag Small 15 Nos. per packet (2 packets per month), Garbage Bag Biodegradable (80 litre capacity) 30 piece per packet (4 packets per month), PVC Bucket 20 litre capacity (5 Nos. per month), Liquid Soap (10 litre per month), White duster of size 24''x24'' (40 Nos. per month), Jhul Jharu (5 Nos. per month), Broom Stick with handle (2 Nos. per month), Floor Wiper (2 Nos. per month), Dust Pan (2 Nos. per month), Chock Pump - Plunger (4 Nos. per month), Muritic Acid (1 litre per month), Toilet Brush (Synthetic) (8 Nos. per month), Nepthaline (BC) (0.5 kg per month), Carpet Brush (1 No. per month), Surf Detergent Powder (3 kg per month), Soap bar of 75 gram (15 Nos. per month) etc. |
| 249 | HORTICULTURE WORK: Monthly Supplying of materials at site for horticulture work: (1) Mustard Oil cake (20 kg per month), (2) Bone Meal (15 kg per month), (3) Sterameal (20 kg per month), (4) Garden soil (10 cft per month), (5) Super Phospate (6 kg per month), (6) Ammonia Sulphate (12 kg per month), (7) Urea (12 kg per month), (8) Insecticide (0.15 litre per month), (9) Fungicides (0.10 kg per month)(10) Earthen Tubs (10\\" Size) (7 Nos. per moth), (11) Pigment (1 kg per month) & (12) Spl. Challi - Pot (500 mm Size) (2 Nos. per month). |
| 250 | Supplying 1.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 251 | Supplying 2.5 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 252 | Supplying 4 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 253 | Supplying 16/0.20 mm (0.5 sqmm) twin core FRLS/HFFR PVC sheathed, flat flexible copper cable. |
| 254 | Supplying 32/0.20 mm (1.0 sqmm) twin circular, FRLS/HFFRPVC sheathed, workshop flexible copper cable |
| 255 | Supplying 20 mm iron staples/ saddles/ screws. |
| 256 | Supplying 25 mm iron staples/ saddles/ screws. |
| 257 | Supplying 20 mm dia, ISI marked, PVC conduit. |
| 258 | Supplying 25 mm dia, ISI marked, PVC conduit. |
| 259 | Supplying 20 mm PVC junction box. |
| 260 | Supplying 20 mm PVC junction box, two way. |
| 261 | Supplying 75 mm X 75 mm X 50 mm PVC box. |
| 262 | Supplying Modular GI box for 2 module. |
| 263 | Supplying Modular GI box for 3 module. |
| 264 | Supplying Modular GI box for 4 module. |
| 265 | Supplying Modular GI box for 6 module. |
| 266 | Supplying Modular GI box for 8 module. |
| 267 | Supplying 3 mm thick phenolic laminated sheet. |
| 268 | Supplying Ceiling rose, 3 pin, 5 A ISI marked. |
| 269 | Supplying S.P. 5/6 A, one way modular switch, ISI marked. |
| 270 | Supplying S.P. 15/16 A, one way modular switch, ISI marked. |
| 271 | Supplying 3 pin 5/6 A modular socket outlet, ISI marked. |
| 272 | Supplying 6 pin 15/16 A modular socket outlet, ISI marked. |
| 273 | Supplying Modular bell push, ISI marked. |
| 274 | Supplying Stepped type Modular Fan regulator (2 module). |
| 275 | Supplying Modular blanking plate. |
| 276 | Supplying Modular base & cover plate for 1 module. |
| 277 | Supplying Modular base & cover plate for 2 module. |
| 278 | Supplying Modular base & cover plate for 3 module. |
| 279 | Supplying Modular base & cover plate for 4 module. |
| 280 | Supplying Modular base & cover plate for 6 module. |
| 281 | Supplying Modular base & cover plate for 8 module. |
| 282 | Supplying S.P. 5/6 A, one way switch, piano type ISI marked. |
| 283 | Supplying S.P. 15/16 A, one way switch, piano type ISI marked. |
| 284 | Supplying 3 pin 5/6 A socket outlet, piano type ISI marked. |
| 285 | Supplying 6 pin 15/16 & 5/6 A socket outlet, piano type ISI marked. |
| 286 | Supplying Brass batten/ angle holder. |
| 287 | Supplying 6 A to 32 A, ratings, SP MCB, \\"C\\" curve, 10 KA breaking capacity. |
| 288 | Supplying 6 A to 32 A, ratings, DP MCB, \\"C\\" curve, 10 KA breaking capacity. |
| 289 | Supplying Single pole, blanking plate. |
| 290 | Supplying PVC clip for fixing cable. |
| 291 | Supplying 0.75 sq. mm ISI marked, FRLS/HFFR PVC insulated, single core copper conductor cable. |
| 292 | Supplying wall mounted door bell. |
| 293 | Miscellanous Items (Electrical)Cost of Consumables for Electrical Works :(a) Like lamps,electrical wires,cables - Supplying and Fixing of Tube Light, LED/CFL lamps, HPSV lamps, PL Lamps or equivalent LED lamps, holder, bracket etc., of above lamps as and when required including replacement of damaged one. (b) Supplying and Laying of different dia FR/FRLS Cu wire/Al armoured cables in existing conduits/pre-laid raceways for replacement as and when required(c) Termination (Glands, Lugs etc) of above wires/cables- (d) MCCB Isolators etc.(e) Maintenance of floor wise electrical riser of all Blocks(f) Any other electrical or allied costs of hiring electrical/electronic equipment.(g) Maintenance of street light (Monthly basis)(h) Maintenance of Lift machine room (lights, exhaust fan, electrical panel etc.)(i) Installation & Commissioning of Aviation lights |
| 294 | COST OF CONSUMABLES WHICH ARE REIMBURSABLE. (Payment will be made as per Conditions of Contract).Repairing, Renewal and allied Miscellaneous Civil and allied Works including material(s) which are not/could not be covered in the above items and which are required to be executed on an as and when required. This could also include the following:(i) Minor routine immeasureable repair works which may arise and required to be met at site(ii) Minor repair works required to be carried out during VIP visits, inaugural functions, festivals, social occasions in the colony, etc.(iii) On demand works required to be executed on requirement of residents welfare society.(iv) Any other works deemed fit by Engineer-in-Charge as the case may be. |
| 295 | Management Team for Facility Management: One Facility Manager (Highly Skilled) for heading the entire facility team of Rohini Housing Complex and Single point of contact & overall in charge of FM On-site Operations and reporting to engineer-in-charge or his representative. (26 days) |
| 296 | Management Team for Facility Management: One Assistant Facility Manager-cum-Supervisor (Highly Skilled) for Assisting the Facility Manager and reporting to facility manager and engineer -in-charge or his representative (26 days) |
| 297 | Providing 1 Nos. Plumber-cum-Pump Operator (skilled) per day for all pump operation and entire unmeasureable sanitary plumbing works, etc. (30 days) |
| 298 | Providing 1(one) Nos. Plumber Helper (Semi Skilled) per day 30 days per month |
| 299 | Providing 1 (one) No. 2nd Class Carpenter (Semi Skilled) per day 26 days per month |
| 300 | Providing 2 (two) Nos. Electrician (skilled) per day for all electrical works (30 days) (in 1st shift & 2nd shift) |
| 301 | Providing 2 Nos. Electrician Helper (semi skilled) per day for support to Electrician (30 days) (in 1st shift & 2nd shift) |
| 302 | Providing 1 (one) No. House keeping cum Horticulture Supervisor (Semi Skilled) per day 26 days per month |
| 303 | Providing manpower on demand for miscelleneous works at CIL's Premises: Semi-Skilled |
| 304 | Providing manpower on demand for miscelleneous works at CIL's Premises: Unskilled |
| 305 | House Keeping works: Providing 13 (thirteen) Nos. House keeping attendant (unskilled) per day (6 days a week) for House Keeping and upkeepment of Rohini Housing Complex including Single Room Guest House, as per the direction of the department. |
| 306 | Horticulture works: Providing 3 (three) Nos. Gardener (unskilled) per day 26 days per month. Scope of work: (A) Maintenance of Trees/Shrubs: It comprises of mulching of soil once in a week manuring with requisite quantities of manure and fertilizers once in a month for proper growth of plants, spraying insecticides and fungicides twice in a month watering daily, pruning and trimming trees once in a month including re-plantation of dead trees: Total trees/shrubs inside the complex. (B) Maintenance of Hedge: It comprises of cleaning and pruning once in a week manuring once in a month with requisite quantities of manures & fertilizers for proper growth of hedge plants watering daily, spraying insecticides and fungicides twice in a month and mulching of soils once in a week etc all complete job as per instruction of EIC. Total hedge inside the complex. (C) Maintenance of Lawn. It comprises of the following mowing of grass once in a week weeding, sweeping and cleaning, watering daily, spraying insecticides and fungicides once in a month, racking and forking where necessary manuring twice in a month with requisite quantities of manures and fertilizers for proper growth of lawn to develop carpet green grass including top dressing two times before and after monsoon with requisite quantity of silver sand, leaf mould and bone meal etc all complete job as per instruction of EIC. Total lawn area inside the complex. (D) Maintenance of Seasonal Bed: Preparation of seasonal bed comprises of digging soil upto 300 mm removal of weeds and foreign materials, scorching of soil by sun rays, breaking of soil clods by bamboo beaters, application of requisite quality of cow dung and mustard oil cake, leveling and dressing of beds, planting seedlings, application of liquid/dry manure (aluminum sulphate), super phosphate and murato potash of requisite quantity after 20 days of plantation at 15 days interval for proper growth of plants, spraying insecticides and fungicides twice in a month watering daily weeding cleaning and mulching of bed once in a week etc. all complete job as per instruction of EIC size of bed 1.2 x 2.5 mtrs. of 8 nos (approx) (Cost of materials to be paid extra) (E) Annual Maintenance of various types of decorative green plants of sizes varying from 450 mm to 1200 mm (aprox) consists of mulching of soil, pruning and trimming of plants, manuring spreading insecticides and fungicides as and when required, replacement of dead plants and damaged earthen pots, watering daily etc. excluding supplying of necessary materials such as good garden soil, manures, insecticides and fungicides, green plants, earthen pots etc. as required for proper growth of plants etc. all complete job as per direction of EIC. |
| 307 | PEST CONTROL SERVICES: lntegrated Pest Control Services for mosquitoes, bugs, cockroaches, silverfish, termites, spidet mice, rat etc. by spraying with the residual chemical which are safer and long lasting by a hand operated pressure pump as per manufacturers specification on wall surface, ceiling, electrical fixture, electrical lines etc. for the protection of useable materials for the following areas (including extra Services 'as & when' Required). (Total Approx. Area:9100 m2)Spraying for adult mosquito on external perimeter of the building, bushes, walls and other potential shelters/ Anti larval Treatment for mosquito & flies at all possible breeding point like Drain, Manhole & Staged water etc. by using chemicals like LAMBDA CYHALOTHRIN/ CYPERMETHRTN/ DELTAMETHRTNE (Odourless)/ Bl/ FENTHTON of approved manufacturer like UPL, DOW Agroscience , ADAMA or equivalent (Solution containing 120 ml pure chemical of 5% EC per operation for Approximate area 2800 Sqm) - weekly |
| 308 | PEST CONTROL SERVICES: lntegrated Pest Control Services for mosquitoes, bugs, cockroaches, silverfish, termites, spidet mice, rat etc. by spraying with the residual chemical which are safer and long lasting by a hand operated pressure pump as per manufacturers specification on wall surface, ceiling, electrical fixture, electrical lines etc. for the protection of useable materials for the following areas ( including extra Services 'as & when' Required). (Total Approx. Area:9100 m2)Pest covered for Rodent, Mice etc. at all possible entry points and external premises by using chemicals Bromadiolone Cakes (0.005%) or CB / Nontoxic Glue Boards / Zinc Phosphate with Bait of approved manufacturer like BAYER'S, PCI or equivalent (400 gm pure chemical per operation for Approximate area 3500 Sqm) - monthly. |
| 309 | PEST CONTROL SERVICES: lntegrated Pest Control Services for mosquitoes, bugs, cockroaches, silverfish, termites, spidet mice, rat etc. by spraying with the residual chemical which are safer and long lasting by a hand operated pressure pump as per manufacturers specification on wall surface, ceiling, electrical fixture, electrical lines etc. for the protection of useable materials for the following areas ( including extra Services 'as & when' Required). (Total Approx. Area:9100 m2)lndoor residual spray treatment (stair case, corridors in all floors and common area of building) for adult mosquito - by using chemicals like CYPERMETHRIN / BETA CYFLUTHRIN / FIPRONIL of approved manufacturer like ARBUDA/ ADAMA or equivalent ( Soluble Concentrate containing 400 ml raw material per operation for Approximate area 3500 Sqm) - weekly |
| 310 | PEST CONTROL SERVICES: lntegrated Pest Control Services for mosquitoes, bugs, cockroaches, silverfish, termites, spidet mice, rat etc. by spraying with the residual chemical which are safer and long lasting by a hand operated pressure pump as per manufacturers specification on wall surface, ceiling, electrical fixture, electrical lines etc. for the protection of useable materials for the following areas ( including extra Services 'as & when' Required). (Total Approx. Area:9100 m2)Treatment against Cockroaches, termites & Ants (All possible hiding places, specially at Kitchens in the 114 no. of Residential Qtrs.) by using chemicals like Fipronil Anti Roach Gel of approved manufacturer like GODREJ(HIT) or equivalent (30 tubes @ 20 gm per tube for each operation ),other required chemicals - monthly |
| 311 | PEST CONTROL SERVICES: lntegrated Pest Control Services for mosquitoes, bugs, cockroaches, silverfish, termites, spidet mice, rat etc. by spraying with the residual chemical which are safer and long lasting by a hand operated pressure pump as per manufacturers specification on wall surface, ceiling, electrical fixture, electrical lines etc. for the protection of useable materials for the following areas ( including extra Services 'as & when' Required). (Total Approx. Area:9100 m2)Fogging / ULV spraying at Perpheri of the Complex / External Premises of Residential building during the evening by using chemicals like DELTAMETHRINE (KING FOG) (OiL BASED) or equivalent - weekly (2500 Sqm area approx.) |
| 312 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Cleaning and servicing of HT OCB with changing of oil. |
| 313 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing) Supply and installation of Gasket with opening of Top Cover & re-fitting of Gasket 10/6 mm thick as per requirement. |
| 314 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Testing of OCB, Transformer, Bus-duct & LT panel. |
| 315 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Bus-duct reopening, Cleaning, servicing, over-hauling with bar tightness checking, Testing & re-fitting/charging. |
| 316 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Cleaning, Servicing & over-hauling and improvement of IR value (if found low) with testing of Transformer. |
| 317 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Dehydration/ filtration, pouring of Transformer oil. |
| 318 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Collection of Transformer oil and Testing of BDV & Acidity in LAB. |
| 319 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Supply of Transformer Power oil with transportation charges. |
| 320 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Cleaning, Servicing & over-hauling of LT panel & tightness, checking of Busbar /Cables etc. |
| 321 | AMC of Sub-station Annual Maintenance Contract (Cleaning, Servicing, overhauling, Tightness checking and Testing): Rectification/ Modification/ Repairing, Testing and Painting of Earthing System for Substation in half yearly. |
| 322 | Annual Maintenance Contract of DG Sets (Comprehensive): AMC Service charge towards inspection & service of Cummins & Kirloskar DG Set (110 Kva & 125 Kva) |
| 323 | Annual Maintenance Contract of DG Sets (Comprehensive): B-Check for two nos (125kva & 110 kva) of DG Sets (Materials & Valvoline premium blue 7800 plus 1/20 Ltr.) |
| 324 | Maintenance of Pumps (Comprehensive): Comprehensive AMC for 03 Nos.of 12 HP Submersible Pump (Servicing Once in a Month). |
| 325 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing and fixing of DOL panel for Terrace Pump. |
| 326 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ISI marked M.S. ERW black steel PIPE, Heavy grade, IS: 1239/3589, with necessary accessories viz. flange, elbow, bend, reducer, socket, nut-bolt, gasket etc. Welded system, wall clamping and pipe cutting, one coats of red oxide primer and two coats of approved red enamel paint. (Make: TATA): 150 mm N.B. |
| 327 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ISI marked M.S. ERW black steel PIPE, Heavy grade, IS: 1239/3589, with necessary accessories viz. flange, elbow, bend, reducer, socket, nut-bolt, gasket etc. Welded system, wall clamping and pipe cutting, one coats of red oxide primer and two coats of approved red enamel paint. (Make: TATA): 80 mm N.B. |
| 328 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ISI marked M.S. ERW black steel PIPE, Heavy grade, IS: 1239/3589, with necessary accessories viz. flange, elbow, bend, reducer, socket, nut-bolt, gasket etc. Welded system, wall clamping and pipe cutting, one coats of red oxide primer and two coats of approved red enamel paint. (Make: TATA): 25 mm N.B. |
| 329 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Cast Iron SLUICE VALVE fitted with all accessories.IS: 13095 PN-1.6 Make: Koley/ Kartar: 150 mm NB |
| 330 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Cast Iron SLUICE VALVE fitted with all accessories.IS: 13095 PN-1.6 Make: Koley/ Kartar: 80 mm NB |
| 331 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ISI marked Cast Iron SUCTION STRAINER with FOOT VALVE including all accessories. IS: 4038.(Make: Koley/ Kartar): 150 mm NB |
| 332 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ISI marked Cast Iron SUCTION STRAINER with FOOT VALVE including all accessories. IS: 4038.(Make: Koley/ Kartar): 80 mm NB |
| 333 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of S.S./ G.M. BALL COCK. Make: ZOLOTO: 25 mm NB |
| 334 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of S.S./ G.M. BALL COCK. Make: ZOLOTO: 15 mm NB |
| 335 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Non return Valve. Make: ZOLOTO: 25 mm NB |
| 336 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Air Release Valve - GM, Make-UTAM |
| 337 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of PRESSURE GAUGE (0-16kg/sq cm, 4\\" Dia), Make: H.GURU. |
| 338 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of PRESSURE SWITCH, IPS 100, (Make: NDFOS.) |
| 339 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Fire Fighting RRL HOSE PIPE (IS:636) 15 metre long with heavy duty male and female S.S. Type COUPLING (IS: 903) of 63 mm dia., wounded with 18 SWG copper wire complete. Make: BRG-GEI ** IF Required |
| 340 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Steel made short BRANCH PIPE with 20 mm NOZZLE for 63 mm dia hose pipe conforming to IS: 903. Make: GEI ** IF Required |
| 341 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of S.S. Oblique type HYDRANT/ LANDING VALVE inlet of 63mm female instantaneous outlet of S .S. type, comprising of flanges, gasket, nut/bolts, complete with blanck cap and chain, conforming to IS:5290, Make: GEI /GUARDS ** IF Required |
| 342 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of wet riser First Aid HOSE REEL swinging type painted with red enamel paint wall mounted fitted with 30 metre length of 20 mm dia high pressure Rubber Hose Pipe with gun metal type Shut-Off-Nozzle with 25 mm inlet valve/ cock. Make: ZENITH/ IPMORTED/ KARTAR |
| 343 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Anti-vibration pad for Main/ S.By/ Jockey Pumps. Make : Std. |
| 344 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Supporting materials for installation and errection, i.e. angle supports, fastners, U-Clamps, etc. |
| 345 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Electronic HOOTER cum SPEAKER of 5/6 Watt capacity for fire alarm/evacuation signal. Make: AGNI/ QUICK SENSE |
| 346 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of ABS type manual CALL POINT with Hammer and Chain in all respect. Make: AGNI / QUICK SENSE |
| 347 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Conventional type Electronic Master Fire Alarm Control PANEL with PA SYSTEM. Make: AGNI /QUICK SENSE |
| 348 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Fire Extinguisher - CO2 - 4.5 Kg, ISI Marked, including all accessories with wall bracket with rawl plug etc. Make: SAFETY FIRST/ SAFETY ONE |
| 349 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Fire Extinguisher - CO2 - 3.0 Kg, ISI Marked, including all accessories with wall bracket with rawl plug etc. Make: SAFETY FIRST/ SAFETY ONE |
| 350 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Providing of Fire Extinguisher - ABC Type - 6 Kg, ISI Marked, including all accessories with hanging arrangement. Make: Safety One/ Safety First/ Hiya |
| 351 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Installation Charges: Supplying Steel Fire check door with Fire Rating of 120 minutes, Tested and certified at CBRI, Roorkee, complying BS 476 part 20, 22 and IS 3614 Part II standards with steel frames as per manufacturers specifications and similar to the prototype tested certificate with overall size as per site requirement. Door frame are made with 1.6 mm thick galvanized steel sheet pressed to single rebate profile of size 140 x65 mm.Door shutter are made with 1.2 mm thick Galvanized steel sheet pressed formed to provide a 50 mm thick fully flush double skin panel with lock seam joints at style edges and infill material is proprietary fire retardant heat insulating material. The items also include provision for required iron mongery and The items also include provision for required iron mongery and Powder Coating Paint finish with suitable colour Overall Door Size: 2100 mm X 1200 mm (Single Leaf). |
| 352 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. S.S. Ball Bearing hinges: 4 InchX3 Inch X 3.0 mm std. |
| 353 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. Wired vision panel: 300 X 200 mm, Clear light: 260 X 160mm. |
| 354 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect. S.S. D-Handle (10 inch): Make – Std. |
| 355 | Annual Maintenance & Operation Contract for Fire Fighting & Fire Detection System: Repairing, renewal and works related to operation of FIRE Service System in order to make it operational in every respect.AMC of fire system and its Equipments1. Inspection of all equipments and accessories of Fire Hydrant system.2. Inspection and functional test of Fire Main/St-By / jockey pumps.3. Inspection and functional test of Fire Alarm/Detection System.4. External inspection of Fire Extinguishers.5. Familiarization training to be conducted twice in a year.Note:1. Inspection schedule – Fortnightly (Twice in a month)2. Any spares consumption and repairing of wasted pipes of fire hydrant system (if any) will be charged |
| 356 | Total impact of GST for the purpose of CTC Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender