Housing Urban and Rular Development Local Bodies Closing in 1 days TDR #58372310

Tender For Construction Of Anganwadi Centre At North Sathipattu Panchayat Using Interlocking Concrete Blocks In Annagramam Block

Issued by Local Bodies · Cuddalore, Tamil Nadu
Tender Value
20 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
1 days left
EMD
20000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Construction Of Anganwadi Centre At North Sathipattu Panchayat Using Interlocking Concrete Blocks In Annagramam Block

BOQ

Name of Work:- Construction of Anganwadi Centre at North Sathipattu Panchayat using interlocking concrete blocks in Annagramam Block
Sl. No. Item Description
1Earth work excavation and depositing on bank with initial lead and lift in hard gravelly soil, hard stiff clay, black cotton soil, hard red earth,shales, murram, and earth muds with 50% fair sized boulders as per SS 20B for narrow foundation.
2Filling with river M-Sand including cost and coveyance of all materials to work site and all labour charges etc.
3Providing US Gravel packing for side berm including all charges etc complete including cost and coveyance of all materials to work site and all labour charges etc.
4Cement Concrete 1:4:8 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
5Cement Concrete 1:2:4 mix using 40mm metal including cost and conveyanceof all materials to work site and all labour charges etc.
6Interlocking brick masonary wrok Cm (0.30x0.23x0.125) including cost and conveyanceof all materials to work site and all labour charges etc.
7RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Basement
8RCC 1:1.5:3 mix using 20mm metal including cost and conveyance and all labour charges etc.Up to Above Basement
9Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.
10Supplying and errecting for sides & soffits including supports and strutting upto 3.29m height for plane surface in all floors including cost and conveyance and all labour charges etc.
11Supply and fabrication of steel including cost and conveyance and alla labour charges etc. complete.
12Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
13Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
14Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three P.Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
15Plastering with cement mortar 1:4mix to 20 mm thick includingcost and conveyance of all materials to site and all labour
16Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. [The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (waterproof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coat of putty, scrapping the putty area to level the surface smooth, etc., complete]. The Putty should be got approved by the Executive Engineer before use on work.
17Paving the floor with Vertified tiles of size 600x600x8mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three Msand) base mortar over the existing floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3Kg./sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
18Dadooing the sides of walls up to required height with est approved quality colour printed glazed tiles of size 150x150x6mm and set in CM 1:2 using 10 mm thick and pointing with same colour cement of 4 kg including cost and conveyance of all materials to
19Towards the cost of steel door of size 0.90mx2.10 m including all charges etc.
20Towards the cost of steel door of size 0.75mx1.20 m including all charges etc.
21Towards the cost of steel Window of size 1.20mx1.30 m including all charges etc.
22RC Jolly
23Steel Ventilator
24Light point
25Tube Light fitting
26Fan point
27Plug point
28CFL lamp
29DPI swtich of 500 V
30G I Pipe
31Service Wire
32Distembering using two coats of Distember from approved company including cost and conveyance of all materials to site and all labour charges etc complete for 10 sqm(Inner)
33Painting two coats Emulsion paint over cement plastered wall including cost and conveyance of all materials to site and all labour charges etc complete
34Supplying and painting two coats new iron work such as steel doors ventilators, window bars etc., (WITHOUT PRIMER)
35Special design art work with first class quality Emulsion paint including cost and conveyance and all labour charges etc.,
36Supply and fixing of 75mm x 50mm hollow Squre tube
37Providing and Fixing of polyurethane foam for Sloped roofas thermal insulation panels or Sandwich insulated panels with external 0.50mm total coated thickness pre painted Galvalume sheet with trapezoidal roofing profile having crest height of 38mm at every 33mm span, whereas internal 0.50mm total coated thickness pre painted galvanized iron sheet with micro ribbed profile and the insulation material will be chlorofluoro carbon and hydro chlorofluoro carbon free, high performance rigid polyurethane foam (PUF) onforming to IS 12436 having density not less than 40±2Kg/M3, Thermal conductivity (K-Value) 0.024 W/m.K measured at 10 degree C mean temperature along with necessary flashings such as L flashing, C flashing etc& accessories such as screws ,fastners ,sealants etc for fixing the panel etc., complete complying with standard specification.
38Towards the cost and supply of Indian type water closet including etc .
39Towards the cost and supply of Europien type water closet including etc .
40Towards the cost and supply of Cuddapah slab for Shelf including etc complete.
41Provision for RWH and Soakpit arrangements Rcc precast rings to
42Provision for Rcc precast Cover slab Soak Pit arrangements
43Provision for PVC Pipe 110mm Dia for septic tank
44Cost and Supply , Instalation of Caterpillar Tunnel with climbing frame and including all labour charges etc complete
45Cost and Supply , Instalation of Colour form mat and including all labour charges etc complete
46Cost and Supply , Instalation of Baby swing and including all labour charges etc complete
47Provision for 500 Liters Syntex tank and water supply arrangements
48Provision for 500 Liters Syntex tank and water supply arrangements
49Provision for Name board
50GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58372310
AUTHORITY Local Bodies
TENDER VALUE 20 Lakhs
LAST DATE 18-11-2026
Authority
Authority Name Rural Development And Panchayats Department
Work Description Tender for Construction Of Anganwadi Centre At North Sathipattu Panchayat Using Interlocking Concrete Blocks In Annagramam Block
Basic Detail
Tender No A2/4794/2026
Bidding Type Tender
Location
City Cuddalore
State Tamil Nadu
Key Dates
Publish Date 04 Nov 2026
Submission Date 18 Nov 2026
Open Date 18 Nov 2026
Finance
Tender Value 20 Lakhs
Tender Fee Ref. Documents
EMD 20000
Exemption Not Available
Document List
3f84c948-a74e-4af4-a066-2820376decdd.html
BOQ_866431.xls
Doc01.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 18, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 18, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

3f84c948-a74e-4af4-a066-2820376decdd.html

xls

BOQ_866431.xls

pdf

Doc01.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender