Tender For Installation Of 15 M. Roof Top Tower Including Carrige Of Tower Material Bsnl Store Nagaur To Didawana Site Dist-Nagaur ( Iind Call ).
Tender Value
2.86 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
1 days left
EMD
5733
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagaur → Rajasthan
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of 15 M. Roof Top Tower Including Carrige Of Tower Material Bsnl Store Nagaur To Didawana Site Dist-Nagaur ( Iind Call ).
BOQ
| Sl. No. | Item Description |
| 1 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : |
| 2 | 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size) |
| 3 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size). |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 5 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 6 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 7 | Edges of slabs and breaks in floors and walls |
| 8 | Under 20 cm wide |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 10 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 11 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand). |
| 12 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 metres lead |
| 13 | With cement mortar 1:4 (1cement: 4 coarse sand). |
| 14 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 15 | Carriage of tower material from BSNL Store Nagaur to BSNL Telephone Exchange site Didawana city including loading, unloading, stacking in countable position. The rates includes the cost of providing sufficient labour and experience supervisor at the time of handing ove stacking, sorting, storing etc., dismantled material of 15M three legs RTT tower approximate weight 2..00 MT and lead upto 105 KM approximately. |
| 16 | Making and supplying at site anchor bolts for fixing base of tower manufactured from 25 mm dia mild steel bars of required length and threaded at top upto 150 mm length and welded with lugs made from 100mmx100mmx 10 mm thick mild steel plate at 50 mm from bottom including suitable hexagonal nuts 2 nos (Nuts & Checknuts)and MS spring washer etc all complete as per drected by the Engineer- in -charge. |
| 17 | Placing and embedding in position required number of foundation anchor bolts, nuts and template in each leg of RCC Column and beam of 3 -legged tower as per the structural drawing and agreement maintaining the levelling and verticality centre to entre distances accurately all complete as directed by Engineer In Charge. |
| 18 | Providing hot dipped galvanised nuts,bolts,spring washers and plain washers of required size and length for fixing the same at the joints/junctions of tower wherever found required during maintenance of tower.(The materials for nuts,bolts shall be of grade 4.6 and as per 6639-1972,IS :1364(Part I to V)-2002,IS:1367(Part VIII)-1992,plain washers as per IS:6610-1972 and spring washers of Type-B as per IS:3063-1994,IS:1148-1982,IS:2015-1977). |
| 19 | Supplying & Fixing of hot-dipped galvanised steel members for tower to fix the same wherever found missing or replace any damaged/bent tower members (The material to be used for tower -member shall be galvanised M.S. of grade 'A' as per IS:2062-1999 & IS:808-1989 and satisfy the relevant tests as per IS codes.The fabrication shall be done in accordance with IS:800-1984 and also in accordance with the approved drawings for the tower under maintenance.The galvanising shall conform to IS:4759 & 2629.The total mass of galvanising coating shall not be less than 610 gms/sqm.i.e. 85 microns thickness.) |
| 20 | Erection of Roof Top Tower upto 15M height at desired location and floor as decided by competent authority. This includes all labour and works involed in erection of tower, including shorting numbering etc. All complete as per direction of Engineer in Charge. |
| 21 | Welding plant at site i/c welding of new column bars to existing slab/ beam & column reinforcement bars as directed by engineer incharge.( New reiforcement to be paid separately) |
| 22 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical/manual means with tractor trolley including laying down the material from 3rd floor roof to ground floor outside building in gunny/juite bags including all loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 23 | (a) Supplying, installing, testing & comissioning of Single dome Aviation obstruction light (AOL) fixture having base made of aluminium die cast / fibre body and top cover of red polycarbonate dome & 230 V AC LED Aviation obstruction lamp with 300 & more Nos. clear LED's having light intensity of minimum 1200 LUX & necessary auto on-off scanner photo cell unit with tranformer in built in dome light of make from Vijay, Binoy, Altrox or equivalent etc. with necessary clamp for fixing arrangement etc. all complete as per the direction of Engineer-in-charge. |
| 24 | Providing and fixing MCB of range 6-32 Amp of Havells, Merlin Gerin or equivalent make. |
| 25 | Providing and fixing PVC double insulated 2 core x 1.5 Sq.mm. copper conducter / unarmoured power cable (Finolax,Polycab or equivalent) including removing damaged power cable and encasing new power cable in existing PVC conduit pipe wherevere required . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender