Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58370987

Tender For Repair To Sunken, Stone/Brick Masonar, Rendering To Md Accn Of 28 Camp, Piru Singh Chowk, Ske Line & Aul Under Age B/R-I At Mil Stn Yol

Issued by Statutory Bodies & Commissions/Committees · Kangra, Himachal Pradesh
Tender Value
38 Lakhs
Estimated cost
Bid Submission
28 Nov 2026
10 days left
EMD
76000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repair To Sunken, Stone/Brick Masonar, Rendering To Md Accn Of 28 Camp, Piru Singh Chowk, Ske Line & Aul Under Age B/R-I At Mil Stn Yol

BOQ

Name of Work:- REPAIR TO SUNKEN, STONE/BRICK MASONAR, RENDERING TO MD ACCN OF 28 CAMP, PIRU SINGH CHOWK, SKE LINE & AUL UNDER AGE B/R-I AT MIL STN YOL
Sl. No. Item Description
1Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for sunken portion including removal of debris to a distance exc 1.5 Km but n exc. 2 Km outside military stn, complete all as specified.
2M&L for plain cement concrete 1:5:10 type E-2 (Using 40 mm graded crusshed stone aggregate) as in sunken floors, complete all as specified.
3Water proofing treatment of sunken portion using shaliurethane-BTD of STP make or equivalent mentioned in Appendix 'C' high solid content component Water basedliquid applied elastometric water proofing membrane as ASTMC 836 and ASTMD 6083, thickness of the membrane shall be 1.50 mm having solid content of more than 80 % elongation of 500 + (-) 50 % laid over reinforcing layer on non woven geotextile mesh of 40/50 gms including applying self primer coat by diluting with 1:1 ratio @ 0.20 Kg per square metre and surface preparation, complete all as per manufacturer's instructions/ specifications and as directed.
4M&L 25mm PCC 1:2:4, type B1 (Using 20mm graded crusshed stone aggregate) for sunken portion complete all as specified and directed.
5S&F for 32 mm dia, 450 mm long, galvanised iron, medium grade pipe as in spout of sunken floor all as specified and directed.
6Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 Km but n exc 2 Km outside the military stn, Complete all as specified.
7M&L for Non skid ceremic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in cement mortar 1:6, complete all as specified.
8M&L for Glazed ceramic coloured tiles 450mm x 350mm x 7 mm thick as in vertical surfaces such as skirting, dado etc set and jointed in neat cement slurry pointed in white or coloured cement to match over and includind 10 mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified.
9Demolition of cement concrete reinforced of any description in any position complete including removal of debris to a distance exc 1.5 km but n.exc 2 Km outside military stn, all as specified and as directed.
10M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified.
11M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. fair finished flat surface of concrete complete all as specified and directed..
12M&L for reinforced cement concrete type B1, 1:2:4 (20 mm graded aggregate) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
1318-20mm thick marble (green marble) work (table rubbed and polished and moulding of outer edges) in steps, jambs and pillars, window cills, cooking platforms and the like including pointing with grey cement slurry (1:2) using marble dust with admixture of pigment to match with shade of marble with and including 15mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-charge.
14Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
15Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) n.exc 1.5 Sqm each complete all as specified and directed.
16M&L WPC(Wood Polymer Composit) Double Prelam Door Frame solid(Chowkhat) of Size 120mm x 50mm with a wall thickness of 5mm(+/- 0.25), made out of extruded 5mm(=0.25) mm thick PVC Sheet of Density 600kg/cbm manufactured y an ISO 9001-2015 certified company and by joining 3 Nos heat moulded PVC Sections. The high section of size 35 x35 mm shall be maid from plain colour PVC sheet of 5mm(=/- 0.25 mm) thickness. The inside section will be covered with 5mm thick PVC sheet'C' shape covering section of size 120mm x 50mm. At centretop position 5mm(+0.25mm) thick 50 x50 x50 mm pattam section should be pasted with solvent cemen adhesive to make double pattam of frame. The frame shall be mitre cut at two corners & joined with 4 nos of 150mm long 'L' brackets of 19 x 19 mm M.S sq, Tube or fusion heat welding process. The two vertical door frames are to be reinforced with 25 x 25 mm M.S sq Tube of 19 gauge throughout the frame. The Door Frame shall be fixed to the wall using 8/100mm fischer screws. A minimum of 4 nos of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. co mplete as per manufacture's specification & direction of engineer-in charge.
17Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of solid core single Leaf Flush Door of 25mm thickness, lipped with 15mm(5mm x 3) thick x 30 mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30 mm width on the other stiles & bottom rails. The inner panel Laminated with 2mm thick termite proof, water proof & fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain &/or prelam colors on one side after routing the mouldd design on flush door & 2mm plain and/or prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc. complete as per direction of Engineer-in-charge, manufacture's specification and drawing.
18S&F for 75 mm size butt hinges medium weight , cold rolled MS and fixed complete all as specified and directed.
19S&F for 150 mm size Handles extruded aluminium alloy handles,fabricated type anodised complete all as specified and directed.
20S&F for 100mm size aluminium anodised, barrel tower bolts, of extruded section and fixed complete all as specified and directed.
21S&F 2nd class hardwood Plain, solid, straight, cupboard chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed..
22S&F 18/19mm thick Prelaminated particle board, interior grade, prelaminated both side decorative choice lamination, fixed with screws to timber frame work and wall complete all as specified and directed.
23S&F teak wood lipping, 6mm thick fixed with nails complete all as specified and directed..
24S&F for Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap (when open) 40mm, complete all as specified.
25S&F 75 mm size Extruded aluminium alloy handles, fabricated type, anodised, decorative type, fixed to shutter complete complete all as specified and directed..
26S&F for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
27Dismantling PVC drain pipes, 75 to 110 mm dia, fixed to walls, laid in floors or in trenches or in any position including all fittings all as specified and directed.
28S& F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75mm dia outlet pipe in cement concrete type B-1 (1:2:4) , all as specified and directed.
29S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or in floors of bore 110 mm, in repairs complete, all as specified.
30S&F for PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints laid in trenches or floors of bore 75 mm, laid in repairs complete, all as specified.
31S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 110 mm, in repairs complete, all as specified.
32S&F PVC (SWR) pipes single socketed, type B, in any length with rubber ring joints fixed to walls of bore 75 mm, in repairs complete, all as specified.
33S&F for PVC (SWR) junction single, (Single T) equal or unequal, 75mm/110 mm bore provided with oval access door, fixed in repairs all as specified.
34S&F for PVC (SWR) bend any radius, 110mm bore, fixed in repairs complete all as specified.
35S&F for PVC (SWR) bend any radius with or without access door, 75mm bore, fixed in repairs complete all as specified.
36S&F for 110 mm PVC (SWR) vent cowl complete, all as specified.
37S&F for Rotational moulded polyethylene water storage tank 500 Ltrs capacity four layered (ISI Marked) cylinderical vertical with closed top, hoisted and fixed in position with ball brass valve, high pressure with Brass PVC float valve 20mm dia with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line including taking down of old tank, all as specified.
38Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity exe. 250 ltrs and n. exe 500 Ltrs including Disconnecting existing tanks, setting aside (or lowering and refixing if required) complete all as specified and as directed.
39M&L Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. Make: Cat. No.: F280016/Cat. No.: F280020 of \\"HINDWARE' or F2002511/ F2002405 of \\"CERA\\" or Cat No. 8155/9055 of \\"PRAYAG\\" or Cat No. TQT-520/521S of \\"ESSCO\\" or equivalent makes mentioned in Appx 'C' as directed by Engr-in-Charge.
40S&F for Vitreous Chinaware squatting pan, ‘Orrisa pattern’ size 580 mm x 440 mm, snow white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, integral foot rest with provision of plain cement concrete M-15, type B-I using 20 mm graded crushed stone aggregate complete all as specified, incl making connections to trap and to flush pipe including CP Jet etc and making good to floors to match existing, in repairs, all as specified.
41S&F in repair only 10 litre capacity PVC, low level, valveless, syphonic action type flushing cistern, inlet ball valve, float valve, handle and fixing arrangement, 32 mm dia. PVC flushing pipe, PVC connection 15 mm size with PTMT nuts of length 450 mm and with CP brass coupling & PVC washer at both ends, complete all as specified.
42S&F in repair Vitreous china wash basin, white, corner or flat of size 450 X 300mm or any other size as directed by Engr-in-charge and excluding taps, waste, chain and plug and pocelain stopper but incl brackets, cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete fixed in repairs.
43S&F in repair Polyethylene and unplasticised PVC pipe 32 mm bore low density polyethylene (LPDE) pipes of pressure rating 6 kgf/sqcm, complete all as specified.
44S& F in Repair Sink with drain board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 405mm x 355mm x 178 mm, all as specified.
45S&F for Sheet glass shelf assembly, 55 cms long consisting of 5.5 mm thick sheet glass shelf 12cms wide with Brass bracket guard (rectangular/ oval/ curved and railing 60 cms long, selected quality as approved by GE, fixed in repairs, all as specified and directed.
46S&F for Chromium plated brass shower rose, fancy type, 125mm size with shower arm, chromium plated, 195mm long with bend of 45° with flange suitable for 15mm bore pipe with swivel joint fixed to pipe in repairs, complete all as specified.
47S&F for angle valve/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.
48S&F for Stop valves, cast copper alloy, chromium plated fancy type with long shank and cup(Concealed Type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified. ( Consealed stop cock)
49S&F for 600mmx450mm bevelled edge looking mirror of selected quality with 4.5mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repairs, all as specified.
50S&F in repair for Fancy type Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type , screwed down high pressure, screwed for iron pipe or for brass ferrule fixed in repairs, all as specified.
51S&F in repair for Pillar taps fancy type 15 mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed.
52S&F in repair PVC connections 15 mm size with PTMT nuts of length 600 mm, complete all as specified.
53S&F in repair waste coupling 32mm or 40mm CP for glazed ware sinks, basins, etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
54S&F in repair soap dish any type fixed to plugs with chromium plated brass screw, complete all as specified.
55S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified.
56S&F in repair 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight20mm-210gms) Complete all as specified.
57S&F in repair towel rail 450 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 170 gms), complete all as specified.
58S&F in repair 25mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 25mm-455gms) Complete all as specified.
59Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc. complete including removal of debris to a distance exc 1.5Km but n. exc 2 Km, Complete all as specified.
60M&L for 15mm thick rendering on fair faces to brick work or stone masonry surface in CM 1:6 finished the surface even and smooth (without using extra cement on internal wall surface, complete all as specified.
61M&L for 10 mm thk rendering in cement mortar 1:3 on ceiling surfaces, finished surface evan and smooth without using etra cement complete all as specified & directed.
62M&L for Preparation of new plastered or unplastered surfaces of walls with wall care putty, 2mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper complete all as specified and directed.
63M&L for Preparation of old or previously treated plastered surfaces of walls and applying two coats of oil bound distemper over and including wall care putty, 2mm thick over plastered surface to prepare the surface even and smooth including complete removal of existing treatment complete all as specified and directed.
64Preparation of old plastered or unplastered surfaces of walls including complete removal of existing treatment and applying Finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed. Make : ''ASIAN PAINTS/BERGER/NEROLAC''.
65M&L for Preparation of new plastered or unplastered surfaces with wall care putty, 2 mm thick over plastered surface to prepare the surface even and smooth and applying two coats of oil bound distemper on ceiling complete all as specified and directed.
66M&L for Preparation of old or previously treated plastered or unplastered surfaces including complete removal of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed.
67Taking up or down old 20mm bore steel tubing fixed to wall and ceiling or laid in floor,with all fittings and fixtures and short lengths including cleaning for refixing or removal to store,complete all as specifed .
68Supplying and laying of CPVC pipes , 20 mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
69S&F for steel tubes, 32 mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specifed .
70Supplying and laying of Female Brass Threaded Adaptor (FTA/ FBTA) of dia 20 mm complete all as specfied
71S&F of Tank Adaptor, (16/20mm bore dia of pipe)complete all as specified and as directed.
72S&F of Union, (16/20mm bore dia of pipe)complete all as specified and as directed.
73Supplying and Fixing Nipple of dia 20 mm suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm45gms /25mm- 65g, complete all as specified.
74S&F in repairs Ball brass valves, (15/20mm bore dia of pipe) high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
75Cutting chases, pinning in, making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshade, shelves, lintles etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10cm girth all as specified and directed.
76Demolition of stone/boulders or brick masonary built in cement mortor including all quoins, arches, pillars, etc but excluding ashlar facings, dresses stone work and precast concrete articles etc, complete all as specified.
77Walling random rubble masonry with best quality locally available stone, brought upto course, well bonded, bedded, solidly hearted and built in cement mortar 1:4, complete all as specified and directed.
78All as per Item No. 99 but except stone
79M&L for Brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.
80M&L for Brickwork with old size flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1: 4 complete all as specified and directed.
81M&L for plain cement concrete 1:2:4, type B1 (Using 20 mm graded crushed stone aggragate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and holdfast and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
82Taking down carefully shutter of steel window, area n. exc. 1.00 sqm each from existing steel frame by cutting existing unservicable fractional hinges(2 Nos) 40 mm in size and refixing in the same opening and on same frame and making the shutter smoothly functional by providing and welding box type hinges-02 Nos, 300mm long casement MS stay with hinged joint fixed to steel sashes and two plates with studs-01 No. and MS handle 100 mm (left or right)-01 No on each leaf including two coats of synthetic enamel paint on welded portion/spot complete. NOTE:- Breaking or damaging glass panes/ wire mesh etc shall be made good by the contractor and no extra shall be paid for the same.
83Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified.
84S&F false ceiling of Non asbestos(Designer) 4mm fibre cement building boards, manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE.
85Demolition of existing treatment on roof slab, taking down cement plaster incl existing tarfelt from roof, of old roof surfaces by brushing with wire brushes for removing caked etc sweeping with brooms and finally fanning the cleaned surface to remove all loose dirt etc on roof and applying the following :-M&L for 15mm thick rendering in CM 1:4 mixed with WPC @ 3% by weight of cement or as per manufacturers instructions, the surface shall be finished even & smooth without using extra cement.FIRST COURSE : One coat of bitumen primer confirming to IS -3384 @ 0.40 Kg/Sqm.SECOND COURSE : One coat of bonding material using blown type bitumen confirming to IS - 702 grade 85/25 @ 1.20 Kg/sqm. THIRD COURSE : A layer of APP modified polymeric membrane, Centre core of 100 mm micron HMHDPE, outer film 20 micron each, thickness 3 mm, having wieght 2.25 Kg/Sqm, complete all as specified.
86Preparetion of newly APP membrane surface and applying two coats of aluminium paint over APP membrance, complete all as specified.
87Taking up or down tank staging/monkey cagging, after completion of roof treatment refixing it same position if broken it then weldind and complete process of maintained,complete all as specified and directed by engineer in charge
88S&F for Steel plate rack made of stainless steel having thickness 1.00mm, fixed with plugs, washers and steel screws including bedding in cement mortar on to dwarf wall, overall size 600mm x 750mm, all as specified and directed.
89Deduction to be made from BOQ for Sch 'A' Part-II (Schedule of credit) Note: Tenderers shall not quote for this schedule. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58370987
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38 Lakhs
LAST DATE 28-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repair To Sunken, Stone/Brick Masonar, Rendering To Md Accn Of 28 Camp, Piru Singh Chowk, Ske Line & Aul Under Age B/R-I At Mil Stn Yol
Basic Detail
Tender No GE/Y-97/2026-27
Bidding Type Tender
Location
City Kangra
State Himachal Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 28 Nov 2026
Open Date 30 Nov 2026
Finance
Tender Value 38 Lakhs
Tender Fee 500
EMD 76000
Exemption Available
Document List
8f6c0ba5-85d4-4bab-91c1-cb0491ac7434.html
BOQ_894312.xls
Tender97.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 28, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Nov 30, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

8f6c0ba5-85d4-4bab-91c1-cb0491ac7434.html

xls

BOQ_894312.xls

pdf

Tender97.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender