Tender For Conservation Works To The Protected Monument, Thirunayathode Temple, Ernakulam District, 2026-27 : Repair Works To The Pathayappura
Tender Value
34.70 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
9 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conservation Works To The Protected Monument, Thirunayathode Temple, Ernakulam District, 2026-27 : Repair Works To The Pathayappura
BOQ
| Sl. No. | Item Description |
| 1 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 2 | Dismantling and removing damaged / decayed wooden beams, joists etc without any damage to the existing structure by supporting Jackie, span and appropriate T & P including all Hire and labour charges for Jackie, span and other materials etc. and restoring the damages of wall complete as per the direction of the Engineer-in-charge. |
| 3 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tile 10 mm to 25 mm. |
| 4 | Demolishing lime concrete manually means and disposal of debris within 50 meters lead as per direction of Engineer-in-charge. |
| 5 | Dismantling wooden ceiling / flooring excluding supporting members but including stacking within 50 meters lead thickness above 10 mm up to 25 mm. |
| 6 | Providing second class teak wood works in frames of doors, windows, clerestory windows and other frames, wrought and framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fasts lugs or dash fasteners shall be paid separately). |
| 7 | Providing and laying in position Lime concrete1:2:4 (1 hydraulic lime: 2 river sand :4 20 mm graded stone) etc. complete, as per the direction of engineer in charge. |
| 8 | Ceiling / flooring with 2nd class teak wood planks 20 mm thick teak wood planks fixing with GI screws / wire nails etc . complete. |
| 9 | Ceiling / flooring with departmental planks fixing with GI screws / wire nails etc . complete. |
| 10 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 11 | Providing and laying in position cement concrete 1:3:6 (1 cement : 3 coarse sand : 4 graded stone aggregate 20 mm nominal size) All work up to plinth level. |
| 12 | Flooring with terra cotta floor tile of size 150 x 150 mm or nearest available size laid over cement mortar 1:4, 20 mm thick (1 cement :4 coarse sand) with 6 mm open joints, grouted and pointed with cement mortar 1:2 (1 cement : 2 fine sand). |
| 13 | Removing the traditional wooden battened door shutters with top & bottom sockets without damages to the door frame and re fixing the same after necessary repairs for easy opening and closing etc. complete as per the direction the Engineer-in-charge. |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately) Second class teak wood35 mm thick shutters (Second class teak wood). |
| 15 | Providing and fixing Second class teak wood panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured), Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 16 | 12 mm cement plaster of mix 1:4 (1 cement : 4 coarse sand). |
| 17 | Protective coating to the wooden roof members with CNS (cashew shell oil) mixed with diesel at 1:1 (1 diesel & 1 CNS oil) including cost of materials and labour charges etc. complete. |
| 18 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture including applying additional coats wherever required, to achieve even shade and colour. Two coats. |
| 19 | Comprehensive documentation of work in the form of photos and before, during and after the conservation work for future references. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender