Public Administrative Department Trust & NGO Closing in 3 days TDR #58370529

Tender For Providing Galvalum Sheet Shed And Special Repair Works To Chatram No 5 Of Arulmigu Bannari Mariamman Temple Bannari Sathyamangalam Erode District

Issued by Trust & NGO · Erode, Tamil Nadu
Tender Value
23.50 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
3 days left
EMD
21800
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Providing Galvalum Sheet Shed And Special Repair Works To Chatram No 5 Of Arulmigu Bannari Mariamman Temple Bannari Sathyamangalam Erode District

BOQ

Name of Work:-
Sl. No. Item Description
1Earth work excavation for foundation in all soils and sub Soils to full depth as may be directed except hard requiring blasting inclusive of shoring, strutting ans bailing out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15 cms thick well rammed and consolidated shown by the departmental officers etc. Complete as per standard specification
2Cement concrete 1:5:10 mix using 40mm HBG stone metal including cost and conveyance of all materials to site and labour charges including curing etc., complete.as per standard specification
3Supplying and FILLING GRAVEL in 'foundation and basement in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.
4Supplying and filling in foundation and basement with filling M.sand in layers of 150mm thickness well watered rammed and consolidated complying with relevant std specification including cost of supplying filling sand.
5Supplying and fixing MS steel truss by using 80mm x40mm x 3.20mm rectangular tube, 40mm x 40mm x 3.20mm square tube for purlins and using 150mm x 150mm x 3.20mm size using vertical post . The cost and conveyance of all materials and labour charges but excluding of priming coat etc., complete complying with standard specification
6Supplying and fixing colour coated galvalume sheet of size 0.47mm tk. The cost is including of all material and labour charges etc., complete
7Brick work in Cement Mortar 1:5 using best quality II class ground moulded chamber burnt bricks of size 9\\" x 4-3/8\\" x 2-3/4\\" for foundation and basement including curing, etc., complete complying with standard specification.
8Plastering with cemet mortar 1:5,12mm thick including cost and conveyance of all materials and all labour charges,curing etc,complete complying with standard specifications.
9Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
10Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three crushed stone sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
11Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements
12Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
13Painting two coats of plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by the departmental officers.
14Painting Two coats with ready mixed enamel paint over New iron work inculding cost of material and labour chargers
15Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
16GST Amount for providing Service to Government Contract Works for the above works at 18%(9%+9%). {GST Amount is the Total GST Amount for overall quoted amount} Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58370529
AUTHORITY Trust & NGO
TENDER VALUE 23.50 Lakhs
LAST DATE 20-11-2026
Authority
Authority Name Hindu Religious And Charitable Endowments Department
Work Description Tender for Providing Galvalum Sheet Shed And Special Repair Works To Chatram No 5 Of Arulmigu Bannari Mariamman Temple Bannari Sathyamangalam Erode District
Basic Detail
Tender No ERODE/05/2022 - 2024 TNBILL/2002/12933
Bidding Type Tender
Location
City Erode
State Tamil Nadu
Key Dates
Publish Date 04 Nov 2026
Submission Date 20 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 23.50 Lakhs
Tender Fee Ref. Documents
EMD 21800
Exemption Not Available
Document List
a333873f-2aae-4041-9ddf-8faae8aa4b51.html
BANNARIGASHEETDRAWING.pdf
BANNARIGASHEETPQ.pdf
BOQ_866499.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 3 days
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
html

a333873f-2aae-4041-9ddf-8faae8aa4b51.html

pdf

BANNARIGASHEETDRAWING.pdf

pdf

BANNARIGASHEETPQ.pdf

xls

BOQ_866499.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender