Tender For Conservation Works To The Protected Monument, Pallippuram Fort At Ernakulam District, 2026-27
Tender Value
51.60 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
7 days left
EMD
50000
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Conservation Works To The Protected Monument, Pallippuram Fort At Ernakulam District, 2026-27
BOQ
| Sl. No. | Item Description |
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared . |
| 2 | Cutting branches of trees overhanging above any structures of girth between 90cm to 120cm including stacking of serviceable materials and disposal of unserviceable material, cost of labour, hire charges of rope and pully etc without making any damages to nearby structures etc complete. |
| 3 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. |
| 4 | Demolishing laterite masonry work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. |
| 5 | Demolishing brick in cement mortar work manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge. |
| 6 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed. All kinds of soil. |
| 7 | Providing and laying in position cement concrete 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) excluding the cost of centering and shuttering - All work up to plinth level. |
| 8 | Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources), excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level. |
| 9 | Steel reinforcement for R.C.C work using Thermo - Mechanically Treated bars of grade Fe-500D or more including straightening, cutting, bending, placing in position and binding all complete up to plinth level. |
| 10 | Centering and shuttering including strutting, etc. and removal of form for: Lintels, beams, plinth beams, girders bressummers and cantilevers. |
| 11 | Laterite masonry with neatly dressed laterite stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc. |
| 12 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level below floor 2 level in all shapes and sizes in cement mortar 1:4 (1 cement : 4 coarse sand). |
| 13 | Flush/ Ruled pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand). |
| 14 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 15 | Lime mortar 1:2 (1 lime : 2 river sand) for plastering, is prepared by mechanical grinding, with herbal extracts like palm jaggeri, Kadukka, Kulamavu leaves, Panachatti seeds adhesive and plant steams and leaves of Percea macrantha and vegetable additives etc added to the mixture. Follow the traditional methodology and allow up to 15 days for natural fermentation. Then apply the lime mortar to the prepared surface, 20 mm thick. Finally the surface is troweled smooth after adding organic additives water. Continue this process until the shrinkage and cracks have disappeared. |
| 16 | Lime punning with lime mortar 1:1 (1 lime : 1 river sand) 3 mm thick adding sufficient quantity of vegetative ingredients, palm jaggeri etc. as per the direction of the officer-in-charge. |
| 17 | White washing with High purity hydrated lime powder (Micronol) one or more coats as succeeding coat as per the direction of the departmental officer at site including cost of materials and labour charges etc. complete. |
| 18 | White washing with hydrated lime to give an even shade. New work (three or more coats) On new works as per the direction of departmental officer at site. |
| 19 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead, cement mortar 1:4 (1 cement: 4 coarse sand). |
| 20 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 21 | Finishing walls with Acrylic Smooth exterior paint of required shade, New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). |
| 22 | Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. |
| 23 | Cleaning the shabby floor and wall tiles thoroughly with liquid detergent etc. complete as per the direction of Engineer-in-charge. |
| 24 | Providing and fixing of 80x60cm rectangular retro-reflectorised cautionary, mandatory and informatory sign with 7 years warranty manufactured asper IRC:67 made of type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2mm thick aluminium composite material sheeting 4mm thick with suitable back supporting frame of MS angle 25x25x3mm and supported GI pipe pole 50mm NB confirming to IS:1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45x45x60cm, 60 cm below ground level including painting all exposed surface with two coats of epoxy paint over primer and asper approved drawing and clause 801 including lettering symbols etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender