Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58369161

Tender For Special Repair To Bldg No. P-353 (Lpg Shed) At Umroi Mil Stn Under Ge Umroi

Issued by Statutory Bodies & Commissions/Committees · Ri Bhoi, Meghalaya
Tender Value
31 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
62000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ri Bhoi → Meghalaya
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No. P-353 (Lpg Shed) At Umroi Mil Stn Under Ge Umroi

BOQ

Name of Work:- SPL REPAIR TO BLDG NO. P-353 (LPG SHED) AT UMROI MIL STN UNDER GE UMROI
Sl. No. Item Description
1Demolition of stone slabs and tiles of any description or thickness in floors, aprons, walls, etc, laid, bedded and pointed in any mortar complete all as specified and directed.
2Demolition of cement concrete(un-reinforced) as in ground floor and paving not exceeding 15cm thickness (below or above ground level) etc complete all as specified and directed.
3M&L for machine cut kota stone slab flooring 20-25 mm thick laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including 20 mm thick cement mortar 1:4 screed bed for laying of floor finishes including rubbing and polishing complete all as specified and directed.
4M&L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab to match over and including 10 mm thick rendering (backing coat) in cement mortar 1:3 including rubbing and polishing complete all as specified and directed.
5M&L for coloured glazed ceramic tiles in vertical surfaces of size 350 x 250 x 7mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering (backing coat) in cement mortar 1:4 complete all as specified and directed.
6S &F Powder coated aluminium (minimum thickness of powder coating 50 micron) as in ventilator top hung and partition including the cost of rubber/neoprene gasket /glazing clip required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per directions of Engineer-in-charge. Note : Works of ventilator shall be carried out at height upto 7m.
7S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as per requirement and direction of Engineer-in- charge. Note : Works of grill shall be carried out at height upto 7m
8Supply & Fixing sheet glass ordinary quality 4.8 mm thick glazing in square/ rectangle not exceeding 0.50 sqm each pane and fixed with aluminium beads to aluminium frame/shutter etc. complete all as specified and directed.
9M & L for prelaminated particle board 9 mm thick and fixed to aluminium frame works complete all as specified and directed.
10Material and labour for preparation of old painted Steel based surfaces of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint to truss, etc upto 7m height of building complete all as specified.
11Taking down cement plaster of any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
12Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information
13Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58369161
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 31 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No. P-353 (Lpg Shed) At Umroi Mil Stn Under Ge Umroi
Basic Detail
Tender No 8526/E8
Bidding Type Tender
Location
City Ri Bhoi
State Meghalaya
Key Dates
Publish Date 04 Nov 2026
Submission Date 26 Nov 2026
Open Date 28 Nov 2026
Finance
Tender Value 31 Lakhs
Tender Fee 500
EMD 62000
Exemption Available
Document List
8526TENDERDOCUMENTS.pdf
bb52dc24-0eed-4c53-b3ec-589ba9f19737.html
BOQ_894276.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 28, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
pdf

8526TENDERDOCUMENTS.pdf

html

bb52dc24-0eed-4c53-b3ec-589ba9f19737.html

xls

BOQ_894276.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender