Defence Statutory Bodies & Commissions/Committees Closing in 8 days TDR #58369157

Tender For Special Repair To Bldg No H-03 Of 46 Coy Asc (Sup) Type ‘A And Special Repair To Bldg No P-09 Of 46 Coy Asc (Sup) Type ‘A Under Ge (I) Kanpur Cantt

Issued by Statutory Bodies & Commissions/Committees · Kanpur Nagar, Uttar Pradesh
Tender Value
48.51 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
8 days left
EMD
97100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No H-03 Of 46 Coy Asc (Sup) Type ‘A And Special Repair To Bldg No P-09 Of 46 Coy Asc (Sup) Type ‘A Under Ge (I) Kanpur Cantt

BOQ

Name of Work:- SPL REPAIR TO BLDG NO H-03 OF 46 COY ASC (SUP) TYPE ‘A AND SPL REPAIR TO BLDG NO P-09 OF 46 COY ASC (SUP) TYPE ‘A UNDER GE (I) KANPUR CANTT
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : SPL REPAIR TO BLDG NO H-03 OF 46 COY ASC (SUP) TYPE ‘A’ AND SPL REPAIR TO BLDG NO P-09 OF 46 COY ASC (SUP) TYPE ‘A’ UNDER GE (I) KANPUR CANTT Contract No : GE(I)/KAN/T-80 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Taking down chowkhat or frame with shutter (without taking off shutter from the frame) area exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and directed.
3S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of decorative type/wood grain printed colour of size 50 X 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
4Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type/wood grain printed colour flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade),calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and directed.
5S&F 200mm stainless steel fancy handle of approved make fixed with SS screws etc. complete all as specified and directed.
6S&F 200 mm stainless steel barral tower bolt of extruded section complete all as specified and directed.
7S&F 300 mm Stainless steel sliding door bolt with hasp and staple(bolt type) including fixing with necessary accessaries complete all as specified and directed.
8S&F 75mm long aluminum anodised extruded type door stopper of double legged with rubber shoes in bottom complete all as specified and directed.
9S&F aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed
10S&F anodised powder coated aluminium door shutters (single / double leaf) or partitions, aluminium section weighing 0.55kg/m including necessary joining cleats, al powder coated glazing clips, rubber neoprene packing, Al powder coated handles 2 Nos in each door, Al powder coated tower bolt 02 Nos, hinges 06 Nos, Al powder coated snap beading, screws, door stopper 02 No etc. complete all as specified and directed.
11Supply only 4.80mm thick tinted glass sheet and glazing fixed to aluminium window / doors etc complete all as specified and directed
12S&F powder coated aluminium anodized three track three panels sliding window, shutter glazed and gauged of stainless steel wire cloth nominal dia of wire 0.36mm and average width of aperture 1.40mm along with aluminium section with 50 micron anodizing size of frame 100mmx25mmx16 gauge, size of shutter, top, bottom and side rail 19mmx38mmx16 gauge aluminium section with 50 micron anodizing and 5mm thick black / tinted sheet glass to be fixed on glazed portion and necessary stainless steel hooks and eye to be provided as stay of shutter etc complete including necessary jointing cleats, glazing clips, rubber packing attached aluminium snap beading, screws anodized aluminum fitting such as suitable handle & auto locking arrangement etc complete all as specified and directed.
13M&L for aluminium grill of mesh size 65 x 75mm of 6mm dia of aluminium bar fixed with 'Y' or 'H' aluminium sec complete all as specified and directed.
14S&F ARMSTRONG . The grid shoud be of Armstrong make 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600mm module, cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central \\"birdsmouth\\" notches to facilitate fitting of 600mm cross tees. Perimeter trim to be Armstrong wall angles, secured to walls at 450mm maximum centres. Hangers made of galvanised steel of size 26x26x25x1.2mm with a galvanised thickness of 80 grm/Sqm. A pre straightened hanger wire of dia 2.68mm of 1.83m length , thickness of 80grm/Sqm and a tensile strength of 344 - 413 MPa, alongwith adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner incl dimantling of old false ceiling complete all as specified and directed.
15S&F false ceiling 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600mm module, cut cross tees longer than 600mm require independent support 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200mm cross tees. The 1200mm cross tees to have central \\"birdsmouth\\" notches to facilitate fitting of 600mm cross tees. Perimeter trim to be wall angles, secured to walls at 450mm maximum centres. Hangers made of galvanised steel of size 26x26x25x1.2mm with a galvanised thickness of 80 grm/Sqm. A pre straightened hanger wire of dia 2.68mm of 1.83m length , thickness of 80grm/Sqm and a tensile strength of 344 - 413 MPa, alongwith adjustable hook clips of 0.8mm thick, galvanised spring steel for 2.68mm with a minimum pull strength of 110 Kg. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner incl dimantling of old false ceiling complete all as specified and directed.
16M&L for providing 8mm thick ceiling tiles of size 595 x 595 mm , fixed or laid/ inserted to timber/GI/Aluminium frame work as in ceiling, with / without screws, having RH-95%, light reflectance 0.82 - 0.85 complete all as specified and directed.
17Demolition of stone slabs and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar complete all as specified and directed.(Note : Debris obtained from demolition will be dispossed off as directed)
18Demolition of plain cement concrete in ground floor and pavings not exc 15cm thickness below or above ground level complete all as specified and directed
19M&L 40mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in floor to receive tiles complete all as specified and directed.
20Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms/slabs and like laid over 15mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite half round on exposed projected surfaces complete all as specified and directed.
21Machine cut kota stone slab flooring 20-25mm thick over and incl 20mm thick cement screed bed in CM 1:6 laid and joint jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
22M&L 100mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in as in sub base complete all as specified and directed.
23M&L of Machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 80 mm thickness M-40 Grade complete all as specified and directed.
24M&L of Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
25M&L 75 mm thick PCC (1:3:6) type C1(using 20 mm graded stone aggregate) as in plinth protection and paving laid in alternate bays finished finish even and smooth wihtout using extra cement complete all as specified and directed.
26Demolition of brick work or stone/boulders masanory built in cement mortar including all quoins, arches, pillars etc, but excluding ashler facing, dressed stone work and precast concrete articals complete all as specified and directed.
27M&L for brick work with fly ash old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 for manholes, drains, septic tanks, soak wells etc. complete all as specified and directed.
28Taking down cement plaster on bricks including raking out joints hacking for key scrubbing down with water etc.complete all as specified and directed.
29M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of wall even and smooth complete all as specified and directed.
30M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces, mixed with water proofing compound as per manufacturer's instructions, surfaces finished even and smooth complete all as specified and directed. Note:- WPC measured and paid separately.
31M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper on surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.
32M&L for complete removal of existing treatment from surface of walls and preparation of old plastered surfaces and applying two coats of oil bound distmper of any colour on old surfaces of wall over and including a coat of primer and wall care putty for getting smooth surface complete all as specified and directed.
33M&L for preparation of new plastered surfaces and applying two coat of cement based paint of approved shade on plastered surfaces of wall complete all as specified and directed.
34M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over and including a coat of red oxide & over and including 10cm width or girth complete all as specified and directed.
35Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
36M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed.
37S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes with riveted, bolted or welded attachment etc incl mild steel screw bolts (machine made) with hexagonal or square heads at one end & washers as reqd conforming to Fe 410W .Gde-E-250, quality-A.
38Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed.
39S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding towall, fixed with self tapping screws of required size and dia complete all as specified & directed
40S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified & directed Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58369157
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48.51 Lakhs
LAST DATE 25-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No H-03 Of 46 Coy Asc (Sup) Type ‘A And Special Repair To Bldg No P-09 Of 46 Coy Asc (Sup) Type ‘A Under Ge (I) Kanpur Cantt
Basic Detail
Tender No GE(I)/KAN/T-80 OF 2026-27
Bidding Type Tender
Location
City Kanpur Nagar
State Uttar Pradesh
Key Dates
Publish Date 04 Nov 2026
Submission Date 25 Nov 2026
Open Date 02 Dec 2026
Finance
Tender Value 48.51 Lakhs
Tender Fee 500
EMD 97100
Exemption Available
Document List
6397a240-fb0a-4c34-b94c-1ef7dabe7097.html
BOQ_894264.xls
TenderdocumentsT80.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 25, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 8 days
Dec 02, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 15 days

Tender Documents

Download All (ZIP) ↓
html

6397a240-fb0a-4c34-b94c-1ef7dabe7097.html

xls

BOQ_894264.xls

pdf

TenderdocumentsT80.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender