Tender For Maintenance Of Electrical Installation In Non Residential Building At Chandigarh (Repair/ Replacement Of Defective Led Fittings, Cables & Switchgear In Parking Area Of New Lake & Palms Garden, Sector-42, Chandigarh).
Tender Value
3.21 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
7 days left
EMD
6430
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance Of Electrical Installation In Non Residential Building At Chandigarh (Repair/ Replacement Of Defective Led Fittings, Cables & Switchgear In Parking Area Of New Lake & Palms Garden, Sector-42, Chandigarh).
BOQ
| Sl. No. | Item Description |
| 1 | DSR item No. 1.17 Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 2 x 1.5 sq. mm |
| 3 | 2 x 2.5 sq. mm |
| 4 | DSR item No. 2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required. |
| 5 | 100 A,30KA,FPMCCB |
| 6 | DSR item No. 2.4 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). |
| 7 | 4 way (4 + 12), Double door |
| 8 | DSR item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 9 | Single pole |
| 10 | Triple pole and neutral |
| 11 | DSR item No. 5.2 Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 12 | DSR item No. 5.7 Supplying and laying 6 SWG G.I. wire at 0.50 Meter below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 13 | DSR item No. 7.4 Supplying, Installation, Testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. |
| 14 | 3 output(1output per phase) and suitable for three phase supply |
| 15 | DSR item No. 15.15 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. |
| 16 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 17 | DSR item No. 15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. |
| 18 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 19 | DSR item No. 8.13 LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) (Please refer DNIT for complete specification of item no.10) |
| 20 | 90 watt |
| 21 | Supply and Erection of LED Post Top Lantern fittings made of cast aluminium housing with power to be mounted on directly on inbuilt Heat sinks. A UV stabilized PC/PMMA clear diffuser is provided for Glare Free Lighting with high visual comfort to complete with Electronic LED Driver Power supply & related accessories with the following specifications to be installed on existing pole with the help of ladder if required which shall be arranged by the firm at his own cost. (Please refer DNIT for complete specification of item no.11) |
| 22 | Supply, Erection, Testing and commissioning of the following items in existing LED fittings (Street light / flood light/ Post top lantern fitting) installed on wall/ existing pole upto 16 Mtr. Long in place of burnt out / defective material with the help of hydraulic ladder / Crain with bucket which shall be arranged by the firm at his own cost. The job includes cost of making connection with suitable rating copper wire and petty material required to complete the job to the entire satisfaction of Engineer-in-charge. The job also includes the cost of dismantling the burnt out / defective material. |
| 23 | S/E of Electronic Driver suitable for existing 70 watt/ 80 watt/ 90 watt. LED fittings. The Driver should be same make of existing fitting i.e. Philips /Wipro /Bajaj / Havells /Surya /Crompton/ Jaquar/ Lighting Technologies/ Trilux/ Panasonic make only. |
| 24 | S/E of Electronic Driver suitable for existing 100 watt LED fitting. The Driver should be same make of existing fitting i.e. Philips /Wipro /Bajaj / Havells /Crompton / Jaquar/ Surya/ Lighting Technologies/ Trilux/ Panasonic make only. |
| 25 | Labour charges for horizontal boring 1 Mtr. Below ground level for laying of DWC pipe including cost of 2 Nos. pit digging and refilling complete in all respects to entire satisfaction of the Engineer in Charge of the work. |
| 26 | Supply and laying of XLPE insulated PVC sheathed Aluminum conductor armoured cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing Trench/RCC/ HUME/ METAL/ DWC pipe / on surface with the help of MS clamp suitable size as required at site. The job includes labour charges of laying the cable and making connections with suitable size aluminium lugs/thimbles etc as required at site to complete the job to the entire satisfaction of Engineer-in-Charge. The cable should be of Havells/ Polycab/ RR Kabel/ KEI/ Finolex make only. |
| 27 | Size 16 sq. mm 4 Core (In pipe) |
| 28 | Size 25 sq. mm 3.5 Core (In pipe) |
| 29 | Hire charges of boom ladder for whole day to install flood light fittings/street light fittings on existing street light pole. The job also includes labour & petty material required to complete the job. |
| 30 | S/E of cement collar and Jn box at the base of the pole with the detailed specifications (Please refer DNIT for complete specification of item no.16) |
| 31 | Painting of existing street light MS poles 7.5 mtr. / 9 mtr. long with bracket at site. The painting job should be done after preparation of surface with the application of sand paper etc and then the pole should be painted with aluminium paint of superior quality in two coats after applying one coat of primer. The job including for all type of labour, material, paint, ladder/ Hydraulic Crane with bucket and T&P as required at site to complete the job. The primer and paint should be of Asian Paint/ Nerolac/ Berger/ Akzo Nobel make only. |
| 32 | Painting of cement collar of street light poles with two coats of snowcem and MS junction box with superior quality of paint to give good look. The work should be carried out after the removal of original defective paint from the cantilever/ MS junction box with the help of sand paper etc. The RCC collar surface should be properly cleaned and a smooth surface should be repaired and then 2 coats of superior quality snowsem paint will be done. This also includes necessary repair to the broken cement collar with cement sand mixture. The snowcem/paint should be of Asian/ JK/ Birla/ Nerolac/ Berger make only. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender