Tender For Repair/Replacement Of Joinery, Steel Gate, Rolling Shutter Etc Inside Cod Under Age B/R-I Of Ge (I) Kanpur Cantt
Tender Value
40 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
20 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Joinery, Steel Gate, Rolling Shutter Etc Inside Cod Under Age B/R-I Of Ge (I) Kanpur Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE(I) Kanpur Name of Work : REPAIR/REPLACEMENT OF JOINERY, STEEL GATE, ROLLING SHUTTER ETC INSIDE COD UNDER AGE B/R-I OF GE (I) KANPUR CANTT Contract No : GE(I)/KAN/T-69 OF 2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Items/Works Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) exc 1.5 sqm n exc 4 sqm including making good dismantled portion by brickwork,cement concrete (1:2:4) or CM(1:3) and plastering each complete all as specified and directed. |
| 3 | Taking down shutter exceeding 1.00 Sqm but not exceeding 2.0 Sqm each complete all as specified and directed. |
| 4 | M&L solid PVC frame (single rebated) of size 50 mmx 47 mm made oud of 5mm plain colour PVC sheet with homogenious fine cellular structure having smooth outer integral skin with suitable metal stifner & fixed with 100x8 sheet metal CSK (copper screws) screws complete all as specified and directed. |
| 5 | M&L factory made solid panel PVC moulded door shutter with wood free EPS 28 to 30 mm thick (style) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plan colour PVC sheet on back face, supply & fix in frame at site complete all as specified and directed. |
| 6 | S&F 100 mm long PVC butt hinges complete all as specified and directed. |
| 7 | S&F 150 mm long PVC handle complete all as specified and directed. |
| 8 | S&F 150 mm long PVC barrel tower bolt complete all as specified and directed. |
| 9 | S&F for Aluminium anodised door partly glazed (using 5mm thick glass) and partly panelled or fully Glazed (using 12mm thick both side prelaminated board Noavapan Kitlam) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x 1.5mm thick incl 125mm dia circular aluminium anodised handle tower bolt, mortice lock of brass size 65mm, vertical type with fair levers door stopper double leg rubber beading and door spring of sandhu/sanant make, two numbers door stopper, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified and directed. |
| 10 | S&F Pressed steel door frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc. Size 105x60mm complete all as specified and directed. |
| 11 | M&L plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) in bed block or hold fasts incl necessary form work complete all as specified and directed. |
| 12 | S&F Mild Steel holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified and directed. |
| 13 | M&L for 35 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed |
| 14 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 15 | M&L 2nd class HW as in plain , solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned joints complete all as specified and directed. |
| 16 | S&F of 30 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. Note : Manufacturer test certificate and PVrs shall be submitted by contractor before claiming payment against this item. |
| 17 | Material & Labour two coats of synthetic enamel paint over and including a coat of pink primer to new wooden surface of any description over 10 cm width or girth including preparation of new surface complete all as specified and directed. |
| 18 | S&F MS butt hinges medium weight cold rolled 100 mm size.complete all as specified and directed. |
| 19 | S&F of 200 mm long barrel tower bolt aluminium anodised of extruded section and fixed complete all as specified and directed. |
| 20 | S&F of 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 21 | S&F of 300 mm long aluminium anodised sliding door bolt with hasp and staple and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 22 | Taking down and refixing of aluminium door of any size complete all as specified and directed. |
| 23 | M&L in repair power coated aluminimum grill of mesh of size 65 mm X 75 mm of 6 mm dia of aluminium bar fixed with Y or H aluminium sec complete all as specified and directed. |
| 24 | S&F in repair of aluminium door clip tee and rubber beadings for fixing glass complete all as specified and directed |
| 25 | S&F in repair 5 mm thick tinted glass of aluminium door exc. 0.5 sqm each pane complete all as specified and directed. |
| 26 | S&F in repair 12 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame /steel fram complete all as specified and directed. |
| 27 | S&F in repair mild steel martice lock vertical type size 100 mm in 4 levers complete all as specified and directed |
| 28 | M&L in repair door double action Floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governig pivot made of brass other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 29 | S&F in repair 150 mm length floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 30 | Taking down chowkhat or frames with shutter (without taking off shutters from the frame) n. exc 1.5 sqm including making good dismantled portion by brickwork, concrete (1:2:4) or CM(1:3) and plastering complete all as specified and directed. |
| 31 | S&F Aluminium powder coated window/CSW (partially openable type ) with aluminium anodized frame of aluminium section 62.5x37x2.5 mm thick with shutters having styles & top rail of aluminium section 44.45 ,glazing clips,rubber packing ',aluminium snap beading ,screws anodized ,aluminium fitting such as hinges, tower bolts handles etc including 5.5 mm thick ordinary plain glass complete all as specified and directed. |
| 32 | S&F steel windows with side hung shutters using seel section with glazing bars including projected box type hinge, steel handle, steel peg stay etc dovetailed or welded complete all as specified and directed. |
| 33 | S&F steel ventilators with top hunh shutter & glazing bars hinges, steel peg stay complete all as specified and directed. |
| 34 | S&F steel windows for industrial buildings fixed type with glazing bar complete all as specified and directed. |
| 35 | S&F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 36 | S&F MS work as in doors framing / chowkhates/kaging/Ventilator for cladding, glazing and the like fixed with angle cleats connecting plates, etc conforming to (Fe-290) Gde E-165 complete all as specified and directed. |
| 37 | S&F steel wire fabric not exc. 4 kg/ sqm in wood or steel members etc complete all as specified and directed. |
| 38 | Hacking out old broken glass (any thickness ,size ,quality or desceiption) form wooden frames or stone,cocrete or brick surrounds glazing with putty or fixed with beads complete all as specified and directed. |
| 39 | M&L for 3 mm thick sheet glass ordinary quality and glazing withoil putty in square not exc 0.5 Sqm in each pane complete all as specified and directed |
| 40 | S&F rough cast wired figured glass 6.4 mm thick and glazing with oil putty /beads n exc 0.5 sqm complete all as specified and directed. |
| 41 | Dismantling of aluminium partition in any description incliuding glass and board complete all as specified and directed. |
| 42 | S&F powder coated aluminium partition with aluminium tube of section 114x44.45x1.90mm thick at bottom and remaining vertical and horizontal rails of section 44.45x45x1.9mm thick and top rail of section 44.45x45x1.90mm thick with aluminium anodized clips, rubber, beading, aluminium angle, nut bolt etc both side laminated 12mm thick at bottom , ISI marked and top parts of partition shall be covered with plain float glass of 5.0mm thick complete all as specified and directed. |
| 43 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 44 | M/L for preparation of new steel surfaces any description not other wise described over 10 Cm width or girth and applying two coat of Synthetic Enamel paint complete over and including a coat of red oxide primer complete all as specified and directed. |
| 45 | Taking down steel rolling shutter including ball bearing,top cover anchoring rod exc 5 Sqm but not exc 15 Sqm each complete all as specified and directed. |
| 46 | S&F steel rolling shutters complete without ball bearings 1.00 mm thickness of lath including top cover, anchoring rod, hasp and staple, guide channel and one shop coat primer, erected in position as indicated complete including taking down of the same push pull or manual type complete all as specified and directed. |
| 47 | S&F Ball bearing for rolling shutters complete all as specified and directed. |
| 48 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 49 | Taking down of rolling shutter of area excedding 8 sqm if necessary on ground, overhauling and welding etc of rolling shutters completely ( push pull or manual type) including oiling, greasing wherever is require including in guide chanel also and erected in the same position after changing of defective part if any including two coat of synthetic enemal paint over and including a coat of red oxide primer on steel shutter complete all as specified and directed. (Note- Defective parts shall be measured and paid separatlly as supply only under item No 49 to 54 and fixing of parts shall deemed to be included in this item ) |
| 50 | Supply only 1.0mm thick lath matching with existing for rolling shutters complete all as specified and directed. |
| 51 | Supply only Ball bearing for rolling shutters complete all as specified and directed. |
| 52 | Supply only Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 53 | Supply only 1 mm thick hood cover of mild steel sheet with necessary fixing arrangement for rolling shutters complete all as specified and directed. |
| 54 | Supply only spring for rolling shutters complete all as specified and directed. |
| 55 | Supply only MS guide rail 2 mm thick for rolling shutters complete all as specified and directed. |
| 56 | S&F in repair mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering and hanging or sliding also fastening and fixing complete for Fe-410- W(Gde- E-250) quality-B |
| 57 | S&F in repair 0.63 mm thick galvanised, corrugated mild steel sheeting with zinc coating 120 gram/sqm two corrugations side lap & 150 mm end lap, fixed with nut bolt and washers or with self drilling zink allunium coated metal screws of suitable size having cap complete all as specified and directed. |
| 58 | S&F in repair steel wire fabric not exc. 4 kg/ sqm in wood or steel members etc complete all as specified and directed. |
| 59 | S&Fin repair butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 100 mm) complete all as specified and directed. |
| 60 | S&F in repair PVC Butt hinges, (Size of hinges in 100 mm) complete all as specified and directed. |
| 61 | S&Fin repair 200 mm long Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 62 | S&F in repair 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed. |
| 63 | S&Fin repair mild steel sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc. |
| 64 | M&L for preparation of old painted steel surface on any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enameled paint including necessary scafolding and saftey precautions upto height 5 metre all complete all as specified and directed. |
| 65 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets complete all as specified and directed. |
| 66 | Providing & Fixing Ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved 12mm thick micro tegular edged GRG false ceiling tiles, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO .50 to 0.75 as per IS 8225 : 1987, Noncombustable as per BS 476 (part 4 ) -1970 and light reflectance of 85% (minimum) including and to be laid in true horizontal level suspended on interlocking metal T-Grid of not dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, complete all as specified and directed. |
| 67 | M&L Solid PVC wall lining complete consisting of 5 mm thick single side prelaminated PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame incl PVC beading in same colour at bottom and top as per design as approved by the Engineer in charge complete all as per manufacturers specification and complete all as specified and directed. |
| 68 | Demolition of Brickwork built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 69 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius in brick thick wall built in CM 1:6 complete all as specified and directed. |
| 70 | All as per item No 68 above here in before but except bricks.including cleaning of bricks complete all as specified and directed.Note : Old serviceable bricks obtained vide item no 67 above shall be reused. |
| 71 | Taking down cement plaster from brick wall including racking out joints, hacking for key & scrubbing down complete all as specified and directed. |
| 72 | M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of concrete or brick surface finished even and smooth without using extra cement mixed wiith water proofing compound 3% by weight of cement or as per manufacturer instruction complete all as specified and directed. Note:- WPC shall be measured and paid seperately. |
| 73 | M&L for 15 mm thick rendering in cement mortar 1:6 on fair faces of concrete or brick, finished even and smooth without using extra cement complete all as specified and directed. |
| 74 | M&L for 10 mm thick cement plaster on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and directed. |
| 75 | Supply only water proofing compound (ISI marked) complete all as specified and directed. |
| 76 | M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper on surfaces of wall over and including a coat of primer complete all as specified and directed. |
| 77 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over and including a coat of cement primer complete all as specified and directed. |
| 78 | M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash as on ceiling surfaces complete all as specified and directed. |
| 79 | S&F in repairs galvanised mild steel wire cloth 0.56 mm in nominal dia of wire average width of aperture 1.40 mm and fixed with wooden beads to wooden joinery complete all as specified and directed. |
| 80 | S&F in repair aluminium (diecast body) hydraulically regulated door closer designation NO- 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 81 | M&L for preparing old varnished wooden surfaces and applying one coat undercoating varnish and two coats finishing synthetic varnish complete all as specified and directed. |
| 82 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 83 | S&F wind ties for roof including securing bolts as directed , including all necessary drilling , bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 84 | Dismantling of asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges complete all as specified and directed. |
| 85 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified & directed |
| 86 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws of required size and dia complete all as specified and directed. |
| 87 | Dismantling of unframed work timber scantlings 40 sqcm and over in section, in any position complete all as specified and directed. |
| 88 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410 W (Gde-E-250) quality A complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 20 daysDec 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 27 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender