Tender For Urgent Civil Repair And Maintenance Work With Closing Of All Window/Ventilator Of Te Building At Aul Under Bsnl Ssa Cuttack.
Tender Value
2.85 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
11 days left
EMD
5712
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuttack → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Urgent Civil Repair And Maintenance Work With Closing Of All Window/Ventilator Of Te Building At Aul Under Bsnl Ssa Cuttack.
BOQ
| Sl. No. | Item Description |
| 1 | Sub-Head : Earth Work |
| 2 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 3 | Sub-Head : Concrete Work |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Sub-Head : Masonry Work |
| 8 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 9 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 10 | Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand) |
| 11 | From ground level upto plinth level |
| 12 | Sub-Head : Steel Work |
| 13 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 14 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 15 | Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. |
| 16 | 10 x 80 mm |
| 17 | Sub-Head : Flooring |
| 18 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 19 | 40 mm thick with 20 mm nominal size stone aggregate |
| 20 | Sub-Head : Roofing |
| 21 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 22 | 110 mm diameter |
| 23 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 24 | Single tee with door |
| 25 | 110x110x110 mm |
| 26 | Bend 87.5° |
| 27 | 110 mm bend |
| 28 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 29 | 110 mm |
| 30 | Sub-Head : Finishing |
| 31 | 12 mm cement plaster of mix : |
| 32 | 1:6 (1 cement: 6 fine sand) |
| 33 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 34 | 1:6 (1 cement: 6 fine sand) |
| 35 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 36 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 37 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. |
| 38 | New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 39 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 40 | Two or more coats on new work. |
| 41 | Sub-Head : Repairs to Buildings |
| 42 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge. |
| 43 | Sub-Head : Dismantling and Demolishing |
| 44 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 45 | Of area 3 sq. metres and below |
| 46 | Sub-Head : Water Supply |
| 47 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 48 | 20 mm nominal outer dia. Pipes. |
| 49 | 25 mm nominal outer dia .Pipes. |
| 50 | 32 mm nominal outer dia. Pipes. |
| 51 | 40 mm nominal outer dia. Pipes. |
| 52 | Providing and fixing CPVC ball valve of approved make for CPVC pipe lines. |
| 53 | 32 mm dia |
| 54 | 40 mm dia |
| 55 | Providing and fixing CPVC unions for CPVC pipe line including cutting and fixing. |
| 56 | 32 mm dia |
| 57 | 40 mm dia |
| 58 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 59 | Credit for |
| 60 | Unserviceable G.I.pipe/ C.I pipe/ Old Damaged MS Grill. |
| 61 | Providing and fixing CPVC brass FTA/MTA in CPVC pipe including cutting the pipe etc complete as per direction of Engineer-in-charge. |
| 62 | 40 mm Diametre |
| 63 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour, 40mm nominal bore. Weighing not less than 142 gms. |
| 64 | Sub-Head : Aluminium Work |
| 65 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 66 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 67 | Sub-Head : Miscellaneous Works |
| 68 | Engaging labour for miscellaneous works such as cleaning of open surface drains of any size, roof, terrace, chajjas at any floor including removal of debrishes, sullage and disposal within a lead of 50 metre all complete as per direction of Engineer-in-charge. |
| 69 | Weeding out trees/ plants/ vegetations growth from wall, roof, chajja or any part of the building at any height by uprooting with application of acid for complete removal to prevent further growth all complete as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender