Tender For Welcome Maintenance (B/R & E/M) In Offrs Md Accn And Certain Repair To Otm And Md Accn Of A-1 Area Of Age B/R-I Under Ge (West) Jalandhar Cantt
Tender Value
45 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
17 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalandhar → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Welcome Maintenance (B/R & E/M) In Offrs Md Accn And Certain Repair To Otm And Md Accn Of A-1 Area Of Age B/R-I Under Ge (West) Jalandhar Cantt
BOQ
| Sl. No. | Item Description |
| 1 | Taking down old shutters of any description exc. 1.0Sqm but not exc. 2.0Sqm Each complete all as specified and directed. |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5sq.m each complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5sq.m but not exc. 4sq.m Each complete all as specified and directed. |
| 4 | S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 5 | S&F made 30mm thick flush shutters, solid core construction, with block board core and plywood face panles, commercial type on both sides complete all as specified and directed. |
| 6 | M&L for factory made 100% solid WPC door frame 85mm x 45mm single rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \\"RAJSHRI\\" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed by Engineer-in-Charge.Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed. |
| 7 | M&L for factory made of 30mm thick 100% solid WPC laminated moduled door shutter comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 Kg/cbm & manufactured by \\"RAJSHRI\\" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed by Engineer-in-Charge.Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed. |
| 8 | M&L for factory made 100% solid WPC door frame 125mm x 65mm double rebated made from wood polymer composite (single extruded process) material comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \\"RAJSHRI\\" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 990N), min compressive strength of 58N/Sqmm, modulus of elasticity 900 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant & fixed in position with SS dash fastener / hold fast of required dia and length, all as per specification, drawing and as directed by Engineer-in-Charge.Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed. |
| 9 | M&L for factory made of 30mm thick 100% solid WPC laminated skeleton door shutter comparising of vigin PVC polymer of K value 57-60 (suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extrauded (inner) with having minimum frame density not less than 650 Kg/cbm & manufactured by \\"RAJSHRI\\" an certified by ISO 9001-2015, having good screw holding capacity (screw withdrawel strength of min 2000N) (Face) & 1100 N (Edge), min compressive strength of 50N/Sqmm, modulus of elasticity 850 N/Sqmm and resistance to spread of flame of class A category with property of being termite /borer proof, water /moisture proof & fire retardant. WPC to be laminated with PVC foil of minimum 14 micron thick of approved design pasted on both faces of shutter and fixing stainless steel butt hings of required size with necessary full body threaded star headed counter sunk SS screwes, all as per specification, drawing and as directed by Engineer-in-Charge.Note: Material test certificate and authentication should be compusory provided by the manufacturing company, complete all as specified and directed. |
| 10 | S&F, factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site complete all as specified and directed. |
| 11 | S&F factory made solid PVC moulded door shutter with wood free solid board , 28 to 30 mm thick (stiles) with 2, 4 or 6 rised panel design with 5mm thick 3D wood laminated moulded PVC sheet Polyurethane painted on the front and back face with with 19 guage thickness usiing MS square tuning supplying and fixing of 19mm x19mm frame structure complete all as specified & directed |
| 12 | S&F Solid PVC Door frame of sizes 95mm x 50 mm made out of 5 mm laminted both side colour PVC sheet reinforcement with MS square tube,supplying & fixing in opening as per specification & drawing complete all as specified and directed |
| 13 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications complete all as specified and directed. |
| 14 | M&L for rolled mild steel angle iron work as in door frames complete, drilled for fixing of hinges etc. also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and directed. |
| 15 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 16 | S&F, stainless steel butt hinges of size 100mm complete all as specified and directed. |
| 17 | S&F, butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed. |
| 18 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 19 | S&F,in repair, double action spring hinges, mild steel with steel wire spring, stove enameled black, size of spring hinge 150mm all as specified and directed. |
| 20 | S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed |
| 21 | S&F, in repair, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed |
| 22 | S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed. |
| 23 | S&F, in repair, extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 24 | S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. |
| 25 | S&F, in repair, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. |
| 26 | S&F, in repair, Mortice lock, brass, six lever, verticle type, size 100mm complete all as specified and directed. |
| 27 | S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 28 | S&F, in repair, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 29 | S&F in repair, 25mm dia, 1mm wall thickness stainless steel, fancy type,decorative curtain rod with decorative ball type brackets ( As per sample) fixed with wooden gutties complete all as specified and directed. |
| 30 | M&L for anodised aluminium powder coated framed work for door, window / vent /aluminium partition etc with one or more rebates incl jointed cleat for fixing etc incl taking down old frame of any type and making good to disturbed surface with cementconcrete 1:2:4/cement mortar 1:4 complete all as specified and directed. |
| 31 | M&L for anodised aluminium powder coated door shutters, aluminium section weighting 0.55Kg/m , incl necessary 4.8mm thick sheet glass ordinary quality & glazing or PVC sheet joining with cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, handles, lock , 2 x aluminium handles 150mm, 3 x hinges , 2 x Aluminium tower bolts 150mm with Each shutter of any type including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified. |
| 32 | S & F anodised aluminium powder coated window and ventilator shutters & Cup board shutter, side hung type having both wiremesh and glazed shutter , aluminium sections weighing 0.55 Kg/m including necessary 4.8 mm thick sheet glass ordinary quality & glazing, aluminium joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.), rollers etc including taking down of old shutter and making good to disturbed surface with cement mortar in 1:4 complete all as specified all as specified. |
| 33 | S&F for powder coated anodised aluminium three track slinding window, (minimum thickness of power coating not less than 50 micron) with two or more shutter with 4mm thick plane glass, one shutter of stainless steel mosquito proofing with good quality bearing, handle, lock etc complete frame to be made out of section 101.60x44.45 thickness of section shall not be less than 1.93 mm and rubber beading and glazing clips etc using sections as given in 'JINDAL' catalogue. |
| 34 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass area of Each window exceeding 1 Sqm but not exc 2 Sqm . (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 35 | Providing and fixing factory made uPVG white colour Sliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame(88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (Onevertical length in Each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cutand fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steelFrame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile tobe inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware[Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mmnominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net Opening will be measured for payment purpose.) |
| 36 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 37 | Supply, and fixing 30 mm thick factory made Polyvinyl Chloride (UPVC) door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and jointed at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickenss. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm ( + 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC ultichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by insering horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as specified by the manufacturer and as per directions of Engineerin- charge. |
| 38 | Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified |
| 39 | S&F 3mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 Sqm Each panes complete all as specified |
| 40 | S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in Each pane complete all as specified |
| 41 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid dry or laid dry and pointed all as specified and directed. |
| 42 | M&L for 15-18mm thick black granite stone (of any type) machine cut, bedded and jointed with gray cement slurry and pointed with white cement with admixture or pigment to match the shade of stone in window cills, jams,cooking platform pillars etc.laid over and including rendering 10mm thick in cement mortar (1:4), jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding and rubbing and polishing complete all as specified and directed. |
| 43 | M&L for plain cement concrete (1:5:10) type D-2 using 40 mm graded stone aggregate as in filling in sunken floors including demolition of cement in concrete (unreinforced) in ground floor and pavings any thickness (below or above ground level) complete as specified and directed. |
| 44 | M&L for 15MM thick rendering in CM (1:3) on brick or concrete surfaces in two layers mixed with water proofing compound @ 3% by weight of cement in top 5mm thick, finishing the surfaces with even and smooth with using extra cement complete all as specified and directed. ( Note:- WPC measured separately) |
| 45 | M&L for Bitumen blown any grade , applied hot, two coats to concrete surfaces at the rate of 1.5Kg Sqm per coat. Including polythene film, black , 50 micron laid in floors. all as specified and directed. ( Note:- WPC measured separately) |
| 46 | S&F GI tubing 40mm bore medium grade fixed to wall and ceiling or laying in floor as sunken spout all as specified and directed |
| 47 | M&L for plain cement concrete (1:2:4) type B-0, using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges, coving, coved fillets of radious 75mm provided at junctions of roof and parapet/ vertical surfaces and like complete all as specified and directed. |
| 48 | M&L for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/Sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150 mm complete all as specified and directed. |
| 49 | M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 50 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 51 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side prelaminated of approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE ) as shutter for kitched cabinet and cup board shutter etc (withshelves and partitions) including necessary fitting & fixture as per manuacturer's i,e steel piano hinges, catcher, haps&staple 100mm long , Alu handle 100mm 02 Nos complete all as specified (Make / shade / design / size as approved by Enginner -in-Charge) |
| 52 | S&F stainless steel kitchen basket in various type of basket , plaint basket height , 4\\" Thali basket 8\\" height Cup saucer 4\\" heigt and perforated cutlury basket 4\\" height all as specified and directed. |
| 53 | S&F hattich chennel for basket sizes 46mm wide all as specified and directed |
| 54 | S&F stainless steel handle for basket size 6\\" all as specified and directed |
| 55 | S&F Vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of Each tile exc 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6 incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed.. |
| 56 | M&L for, vitrified tiles, 10mm thick (minimum), (square/ rectangular) polished, area of Each tiles exceeding 0.36 Sqm (including 600mmx600mm size) but not exceeding 0.42 Sqm, in skirting/dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles and over and including 10mm thick rendering in CM (1:4) complete all as specified and directed. |
| 57 | M&L for colour glazed creamic tiles 7 to 8 mm thick (Square/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 58 | M&L for colour glazed creamic highlighter tiles 7 to 8 mm thick (Square/rectangular) area of Each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, on vertical surfaces such as skirting, dados and risers etc. laid over 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match incl dismantling / demolition and rubbish off the primises etc complete all as specified and directed. |
| 59 | M&L for coloured non skid ceramic tiles, 7 to 8 mm thick, (square/rectangular), area of Each tile exceeding 0.06 sq.m but not exceeding 0.11 sq.m in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including including screed bed or bedding layer of 15 mm thick cement mortar (1:6) complete all as specified and directed. |
| 60 | M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required using expended metal in required size and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing or cocealed conduit wiring, etc and making good , cutting exceed 10 cm but not exceeding 20cm girth complete all as specified and as directed. |
| 61 | Grading & french polishing of old terrazzo flooring with granding machine and finished the surface even and smooth all as per directed . |
| 62 | M&L 25 mm thick cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate as in leveling cource in roof finishes even and smooth with using extra cement complete all as specified as directed. |
| 63 | Taking down cement plaster on brick or stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 64 | M&L for rendering 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls , finished even and smooth without using extra cement complete all as specified and directed. |
| 65 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed. |
| 66 | M&L for rendering 5mm thick in cement mortar 1:4 on fair faces of concrete as in ceilings and finished even and smooth without using extra cement complete all as specified and directed. |
| 67 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 68 | M&L Brick work using old size bricks with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed. |
| 69 | M&L for brick work with sub-class `B' bricks built in CM 1:4, straight or curved on plan exceeding 6 M mean radius using old size bricks in half brick thick wall etc. |
| 70 | M&L for preparation of new plastered or un-plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 71 | M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 1 mm thick wall care putty on wall plastered surface complete all as specified and as directed. |
| 72 | S&F Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 Sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 Sqm |
| 73 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on walls complete all as specified. |
| 74 | M&L for Prepration of old surfaces of ceiling includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of white wash on ceiling surface complete all as specified |
| 75 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on ceiling of (white /ivory / tinted or any colour ) complete all as specified. |
| 76 | Material and labour for complete removal of existing treatment from wall Old plastered/unplastered surface, complete all as specified and directed. |
| 77 | M&L for preparing of old surfaces/new plstered surfaces of walls and applying one coat of birla white putty and finished smooth complete all as specified and directed by Engr -in-charge. |
| 78 | Material and labour for applying one coat of acrylic waterbased interior grade primer @ 0.8 ltr (undiluted)/10Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%.including cleaning of doors &windows,floors,glasses ,joinery electric fitting,wiring ,furniture etc with required cleaning materials Complete all as specified and directed. |
| 79 | Material and labour for applying one coat of acrylic waterbased exterior grade primer @ 0.9 ltr (undiluted)/10Sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine having a pressure of 3000 PSI +/- 20%. .including cleaning of doors &windows,floors,glasses ,joinery electric fitting,wiring ,furniture etc with required cleaning materials Complete all as specified and directed. |
| 80 | Materials and labour for applying two coats of acrylic washable distemper(Ist Quality) @ 1.5Kgs/10 Sq mtr diluted with water in 5:3 ratio applied over priming coat with fully automatic airless spray machine having a minimun pressure of 3000 PSI +/- 20%. .including cleaning of doors &windows,floors,glasses ,joinery electric fitting,wiring ,furniture etc with required cleaning materials Complete all as specified and directed.Note : Minimum gap between subsequent coats shall be 6-8 hrs |
| 81 | Materials and labour for Finishing wall with water based anti-algal 100% acrylic smooth exterior emlusion having silicon additives in two coats @ 1.79 ltr / 10Sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine having a minimum pressure of 3000 PSI +/- 20%. .including cleaning of doors &windows,floors,glasses ,joinery electric fitting,wiring ,furniture etc with required cleaning materials Complete all as specified and directed.Note : Minimum gap between subsequent coats shall be 6-8 hrs.Note for item 1.10 to 1.50 :- The work shall be executed by applicator of OEM only. The applicator shall be in proper dress through out the contract period. The rates quoted shall deemed to include the same. OEM to ensure this aspect to maintain throughout contract period. |
| 82 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of oil bound distemper on wall (white /ivory / tinted or any colour ) complete all as specified. |
| 83 | M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of exterior emulsion paint (Apex of Asian Paints/Weathershield Projects of Dulux Paint or equivalent approved by GE complete all as specified and directed. |
| 84 | M&L for Prepration of old surfaces of walls includinng scrapping down smoke ,soot,and efflorescent salts and treatings oil and gresy spots, brooming down or steel wire brushing removing nails making good holes cracks etc on plastered or unplastered surfaces and applying one coat of cement based paint. |
| 85 | M&L for writing letters or figures (block, roman, Italic or Indian) not exc. 30cm high with synthetic enamel paint such as P-02 P-39 OTM etc ) , ground of 150 dia complete all as specified and directed. |
| 86 | M&L for writing letters Stops, commas, short lines, dashes, hyphens, brackets, etc. as directed with synthetic enamel paint complete all as specified and directed. |
| 87 | M&L for preparation of old wooden surface of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L for subsequent coat of of synthetic enamel paint on wooden surfaces over 10 CM width or girth. |
| 89 | M&L for preparation of old painted steel surfaces of any description, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 90 | M&L for subsequent coat of of synthetic enamel paint on steel surfaces over 10 CM width or girth. |
| 91 | M&L for overhead PVC tank cleaning of any capacity including dismantling and setting aside or lowering if required for repairs, cleaning, etc and hoisting if required reconnecting and re- fixing in same position after cleaning and removing all scale and dirt etc from tank and from mouths of circulating pipes etc, including replacement of required fittings such as PVC ball valve with brass rod, tank nipple etc, complete all as specified and directed. |
| 92 | Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 500 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. |
| 93 | Supplying , fixing & Hoisting and fixing in position and connecting, in repairs, 1000 litres capacity rotational moulded polyethylene water storage tank (cylindrical, vertical with closed top) including fixing arrangement for inlet/outlet/over flow and vent pipe of standard size all as specified in SSR Part-I complete all as specified and directed. |
| 94 | M&L for Demolition of reinforced cement concrete of RCC roof tank etc complete all as specified and directed. |
| 95 | M&L for 50mm thick cement concrete (1:2:4) type B1, using 20mm graded stone aggregate laid over roof as in platforms for water tanks, finished even and smooth without using extra cement complete all as specified and directed. |
| 96 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. |
| 97 | M&L for plain cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed. |
| 98 | M&L for cement concrete (1:2:4), type B-1, using 20mm graded stone aggregate in window cills, lintel band, bed block, copings and the like including weathering, slightly rounded or chamfered angles and throating, Including necessary form work complete all as specified and directed. |
| 99 | Supply only, integral water proofing compound. complete @ 3 % by weight cement used in roof and parapet/ vertical surfaces and like complete all as specified and directed. |
| 100 | S & F in repair 15mm bore gate / globe valves cast copper alloy screwed both end down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fixed bore of following size. |
| 101 | S&F 15mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making good in CM 1:3 incl taking down old pipe complete all as specified and directed. |
| 102 | Re-fixing steel water tubing of 15 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed |
| 103 | S&F 20 mm bore tubing medium grade galvanised steel tubing with all fittings and fixed to walls, ceiling and in floor incl cutting, chasing in wall, floor or ceiling and making goodin CM 1:3incl taking down old pipe complete all as specified and directed. |
| 104 | Re-fixing steel water tubing of 20 mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, incl taking down old pipe complete all as specified and directed |
| 105 | S&F in repair plastic seat cover white/coloured (as required at site) for water closet padestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed. |
| 106 | S&F, in repair, vitreous china floor mounted singel peace WC with PP soft close seat cover , hinges accessories set as per size 375x660x800mm with cistern fitting (including fixing bolts flush pipe) complete all as specified and directed. |
| 107 | S&F in repair vitreous china wash down water closet pan Padestal pattern white excluding fixing bolts, flushing cistern and flush pipe with and incl 'P' or 'S' trap and making good to floor to match with existing all as specified and directed. |
| 108 | Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests.P or S Trap complete including provn of cement concrete bedding complete all as specified and as directed |
| 109 | S&F in repair viterous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length complete all as specified and directed |
| 110 | S&F in repair 32mm bore Brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified as directed. |
| 111 | S&F, in repair, 10 ltrs capqacity PVC valveless, syphonic action, type, flushing cistern, low level, white, inlet ball valve, float and handle including brackets and flush pipe to pipe or lever etc complete all as specified and directed. Jaquar/Perry ware/Hidware./Cera |
| 112 | S&F in repair PVC syphon kit suitable for low level flushing cistern complete all as specified and directed. |
| 113 | S&F in repair PVC syphon kit suitable for low level flushing cistern complete all as specified and directed. |
| 114 | S&F, in repairs, brass, chromium plated tubular towel rack 20mm dia 60cm long between flanges as specified and directed. |
| 115 | S&F in repair, 1600mm x 1100mm plain edge mirror of selected quality glass not less than 5.5mm thick, mounted on wall complete all as specified and directed |
| 116 | S&F, in repair, central hole basin mixer with extended spout 450mm long braided connection pipe (without popup) for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and directed. |
| 117 | S & F in repairs 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 118 | S & F in repairs Fancy type chromium plated 15 mm bore Angle/ plain Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions. |
| 119 | S&F in repairs, stop valves, concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and directed for 15mm bore of pipe. |
| 120 | S&F, in repair, brass chromium plated shower rose with or without swivel joint, 125mm size complete all as specified and directed. |
| 121 | S&F, in repair, 1mm thick, stainless steel plate rack of size 900mmx600mmx200mm complete all as specified and directed. |
| 122 | S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. |
| 123 | S&F in repair 8mm dia brass, chromium plated health faucet (Hand shower) with 01 meter long flexible tube and wall hook complete all as specified and directed. |
| 124 | S&F, in repair, chromium plated glass corner (Corse) size 300mmx300mm complete all as specified and directed. |
| 125 | S&F, in repair, chromium plated glass shelf of size 22\\" complete all as specified and directed. |
| 126 | S&F, in repair, PVC Bath Cabinet made from hard thermosetting material with mirror, white/ivory colour, 400 x 500mm size. |
| 127 | Supply only 32mm, waste fittings, brass chromium plated for basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 128 | Supply and Fixing PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 129 | Supply in repair PVC waste pipe 32mm bore of size 750mm long complete all as specified and directed. |
| 130 | S&F, in repair, kitchen or laboratory sinks made of stainless steel 1mm thick including supply and fix 32mm bore CP waste coupling, plug, washer, 32mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel angle iron 30x30x3mm and flat iron 25x3mm both duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall and making good disturbed portion in cement mortar 1:2 or in PCC 1:2:4, type B-1 using 20mm graded stone aggregate and connecting union to pipe, over all size 915mm x 460, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 131 | S&F in repair hand shower 95mm round shape single flow (ABS Body chrome plated with rubit cleaning system complete |
| 132 | S&F in repair Towel ring round with round flange complete . |
| 133 | S&F in repair Soap Dispenser with glass bottle complete . |
| 134 | S&F in repair tumbler holder all as specified and directed . |
| 135 | S&F, in repair chromium plated tubular towel rail 20mm dia 600mm long Complete all as specified and directed. |
| 136 | S&F, in repair, CP, soap dish holder complete all as specified and directed. |
| 137 | Supply & Fixed in repairs 15mm chromium plated single lever wall mixer 3-in-1 with connector for hand shower arrangementwith connecting legs, wall flannges and wall brackets for hand shower complete as specified and as directed. |
| 138 | Supply & Fixed in repairs 15mm Sink Mixer plete as specified and as directed. |
| 139 | S&F in repair continuous (Piano) Hinges mild steel,bright finish or electro galvanised width of flap (when open) 30 mm complete all as specified and directed. |
| 140 | S & F in repair satinless steel magnetic catcher complete all as specified and directed by Engr-in-Charge. |
| 141 | S&F in repair Door seal of any length (90 CM to 120 CM) 4mm wide with Fibre Brush and metalic body complete. complete all as specified and directed. |
| 142 | S&F in repair Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm.complete all as specified and directed by Engr-in-Charge. |
| 143 | Petty repairs to leaking water in bib taps, pillar taps stop cock, angle valve, PVC connection waste pipes, float valves, concealed stop cock, GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed by Engr-in-charge. |
| 144 | Petty reapirs to high / low level flusing cistern by adjusting the float valve, leakage PVC connection PVC / GI bend incl replacing of rubber washer cheek uts plunges etc for any type of flush complete all as specified and directed by Engr-in-charge. |
| 145 | S&F in repair only 75 mm waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 146 | S&F in repair 110 mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed. |
| 147 | S&F in repair Staniless steel wall Pegs set of six as approved by GE |
| 148 | S&F in repair FRP sheet 2.5 mm thick manglore pattern with all fittings and fixing arrangement as per manufacturer instruction complete all as specified as directed. |
| 149 | S&F in repair 8 mm thick HDHMR Block boards (manufactured by green panel) , grade 1 quality, exterior grade, decorative type with decorative face veneer on one face and laminated on other fac fixed in kitchen cabinet fixed with closing hinges, handle, magnative catch etc as , shutter etc including taking down of old complete all as specified and directed by the Engr-in-Charge. |
| 150 | Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls and floors & one coat of putty and two coat of distemper as per existing colour complete all as directed by EIC. |
| 151 | Taking down sub main wiring of two single core PVC cable PVC insulated 4 / 6 Sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc. & one coat of putty and two coat of distemper as per existing colour complete all as directed by EIC. |
| 152 | Taking down main switch / DB & making disturbed surface good including one coat of putty and two coat of distemper as per existing colour complete all as directed by EIC. |
| 153 | M&L for point wiring with PVC insulated, sheathed cable single core multistranded copper conductor FRLSH cable 1.5 Sqmm size, 1100V grade, drawn into and including PVC rigid concealed conduit medium grade (ISI marked) including PVC unsheathed cable single core copper FRLSH conductor 1.5 Sqmm as continuous earth wire and including pressed MS sheet sunken box 1.63 mm thick with 3 mm thick laminated bakelite sheet one light / fan / call bell point controlled by one, one way switch.all as specified.a) One light / fan / call bell point controlled by one, one way switch. |
| 154 | b) All as per Ser item No -153 above but for 5 amps socket on independent board |
| 155 | c) All as per Ser item No- 153 above but for 5 amps socket on same board |
| 156 | All as per ser item No- 153 above but with 2.5 sq mm cable for 15 amps switch socket combination outlet on independent board complete all as specified and directed. |
| 157 | M&L for point wiring with 1.5 Sqmm, PVC insulated but sheathed, stranded copper conductor single core FRLSH cable, IS-694 marked, drawn through and including non metallic rigid PVC concealed conduit medium grade 20mm dia (minimum) or higher size as specified and cutting chasing on wall complete with all PVC conduit accessories such as socket, elbow, junction box, bell mouth, reducer, bend and flexible conduit etc/ fittings ISI marked for modular fittings and brass screws and cup washers including 1.5 Sqmm stranded copper conductor PVC insulated FRLSH cable green in colour as continuous earth conductor connected to common earth and earth dolly with all accessories complete all as specified and directed. Note : Cost of Metal boxes and modular accessories like cover plates will be paid seprately in respective items)(a) Fan point/ exhaust fan point / one light point / bell/ buzzer controlled by one switch/ bell push. |
| 158 | (b) One socket outet point 5 amps on the same board. |
| 159 | (c) One socket outet point 5 amps on the independent board. |
| 160 | All as Ser item 6 here in before but with 2.5 sq mm wire and earth wire (green colour) of 2.5 sq mm for 3 Pin 15 Amp modular type socket outlet. |
| 161 | Supply and fixing modular metal flush box 1/2 module complete all as specified and directed. |
| 162 | Supply and fixing modular metal flush box 3 module complete all as specified and directed. |
| 163 | Supply and fixing modular metal flush box 4 module complete all as specified and directed. |
| 164 | Supply and fixing modular metal flush box 6 module complete all as specified and directed. |
| 165 | Supply and fixing modular metal flush box 8 module complete all as specified and directed. |
| 166 | Supply and fixing modular metal flush box 12 module complete all as specified and directed. |
| 167 | Supply and fixing modular white cover plate with frame, 1 module complete all as specified and directed. |
| 168 | Supply and fixing modular white cover plate with frame, 2 module complete all as specified and directed. |
| 169 | Supply and fixing modular white cover plate with frame, 3 module complete all as specified and directed. |
| 170 | Supply and fixing modular white cover plate with frame, 4 module complete all as specified and directed. |
| 171 | Supply and fixing modular white cover plate with frame, 6 module complete all as specified and directed. |
| 172 | Supply and fixing modular white cover plate with frame, 8 module complete all as specified and directed. |
| 173 | Supply and fixing modular white cover plate with frame,12 module complete all as specified and directed. |
| 174 | Supply and fixing modular Dummy plate complete all as specified and directed. |
| 175 | Supply and fix in replacement Modular switch 6 Amps single pole one way as per existing make & model/ as per sample. |
| 176 | Supply and fix in replacement Modular switch 16 Amps single pole one way as per existing make & model/ as per sample. |
| 177 | Supply and fix in replacement Modular bell bush 5 Amps as per existing make & model/ as per sample. |
| 178 | Supply and fix Modular multi socket 3 pin and 2 pin 6 Amps round and flat as per existing make & model/ as per sample. |
| 179 | Supply and fix in replacement Modular socket 6A /16 A Twin socket heavy duty as per existing make & model/ as per sample. |
| 180 | Supply & fixing switch piano flush type single pole one way 5 Amps all as specified. |
| 181 | Supply & fixing switch piano flush type single pole 15 Amps. |
| 182 | Supply & fixing socket outlet 5 Amp flush button type all as specified. |
| 183 | All as per item 182 here-in-before but 6 pin 5/15 Amps multi type. |
| 184 | Supply & fixing ceiling roses surfaces bakelite two three terminals 65 x 50 mm all as specified. |
| 185 | Supply & fixing lamp holder PVC, insulated body with back plate suitable for batten fittings including LED lamp 12W with a nominal efficiency 105 lumen/watt all as specified. |
| 186 | Supply & fixing bell electric (dingdong) 230 volt, SP |
| 187 | Supply and fix in repair modular/BLDC fan regulator step type 240 V, 120 W , 2 modules all as as per existing make & model/ as per sample. |
| 188 | Supply and fix ceiling fan regulator Electronic rotary Step type single phase A/C 230 volts all complete as specified and directed. |
| 189 | Supply & Fixing MCB single pole, 240 volts, 6 to 32 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed by EIC. |
| 190 | S & F MCB SPN, 240 volts, 40 to 63 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed by EIC. |
| 191 | Supply and fix Sheet metal DB,double door, SPN 8 way for MCB, 240 volt with 200 amps rated bus bar , neutral bar / connectors suitable copper thimbles , lugs etc. Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 100 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management. Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed by EIC . |
| 192 | Supply and fix MCB DB, TPN 4 way double door suitable for mounting of MCB TPN as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates. Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 200 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management. Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed by EIC . All 3 Phase horizontal distribution boards should have the provision to convert the distribution boards to Per Phase Isolation Distribution Board at site. |
| 193 | S & F MCB TPN, 240 volts, 40 Ampere, rupturing capacity 10 KA, ‘B’ curve type ,MCB should be having the Breaking Capacity of 10 kA and should be ISI marked as per IS/IEC 60898-1 2002 with “B” Curve Characteristics. Should have bi-connect terminals on the bottom terminals for looping and should have 35 sq mm termination capacity on both terminals with insulated sliding shutters for making it IP-20 protected & with two position DIN Rail Clamp for easy mounting. complete all as specified and directed by EIC. |
| 194 | Supply and fix MCB DB, TPN 6 way double door Vertical type suitable for mounting of MCCB as incomer with suitable 200 amps rated bus bars , Neutral links , blanking plates Distribution boards should be Double Door design with IP-43 and IK-08 rating as per IEC 61439-3 with 200 Amp fully insulated copper busbars, insulated neutral bar, earth bar and cable ties for cable management. Distribution board should be supplied with door earthing, prefitted masking sheet, reversible doors and pan assembly for easy installation. Must have possibility of converting lock to panel lock complete all as specified and directed by EIC complete all as specified and directed. All 3 Phase horizontal distribution boards should have the provision to convert the distribution boards to Per Phase Isolation Distribution Board at site. All MCCB incomer distribution boards should be supplied with 250 Amp rated fully shrouded busbars. |
| 195 | Supply & fixing MCCB 4 pole of capacity 63 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangment complete all as specified and directed by EIC . Note- MCCB Should have reverse load and line termination, rotary handles – direct and variable depth and common auxiliaries for entire range. Should be CE marked and conform to IEC 60947-2. MCCB should have the maximum operational voltage ( Ue ) of 550 Volts (AC 50/60 Hz), Insulation Voltage ( Ui ) of 800 Volts and Rated Impulse Withstand Voltage (Uimp) not less than 8000 volts. The MCCB should have been designed at an ambient temperature of 50 degree centigrade. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED.For 16 – 125 A: Should have breaking capacity of min. 16 kA with thermal release adjustable from 80 to 100 % & fixed magnetic release and with Ics = 100% Icu. |
| 196 | Supply & fixing MCCB 4 pole of capacity 100 Amps with breaking capacity 16 Kilo Amps including all electrical connections and fixing arrangment complete all as specified and directed by EIC . Note- MCCB Should have reverse load and line termination, rotary handles – direct and variable depth and common auxiliaries for entire range. Should be CE marked and conform to IEC 60947-2. MCCB should have the maximum operational voltage ( Ue ) of 550 Volts (AC 50/60 Hz), Insulation Voltage ( Ui ) of 800 Volts and Rated Impulse Withstand Voltage (Uimp) not less than 8000 volts. The MCCB should have been designed at an ambient temperature of 50 degree centigrade. MCCBs shall be actuated by a rotary-handle that clearly indicates the three distinctive positions: ON, OFF and TRIPPED.For 16 – 125 A: Should have breaking capacity of min. 16 kA with thermal release adjustable from 80 to100 % & fixed magnetic release and with Ics = 100% Icu. |
| 197 | S & F SITC of high-quality integrated LED Street Light with a minimum system lumen of4750 Lm and system wattage not exceeding 45W with a nominal efficiency 105 lumen/watt. CCT of 5700K with SDCM of < 5 and CRI >70. The housing should be of non-corrosive high-pressure die-cast aluminum with high efficiency LEDs as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with PF > 0.95. Lifetime of 50K hours @L70. The Luminaire should have Powered by integral, Isolated LED electronic driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection (Operation at 440 V AC), Over Voltage protection, Surge Voltage protection upto 4 kV.Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/ULaccredited lab to verify above parameters complete all as specified and directed. |
| 198 | S&F in replacement LED tube light fitting 20W Box type including LED lamp 20 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. |
| 199 | S & F LED bulb 12 Watt with a nominal efficiency 105 lumen/watt, white/warm ,5 star rating complete all as specified |
| 200 | M&L for Sub main wiring with FRLSH two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 4.0 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor cable for earth wire continuity conductor. |
| 201 | M&L for Sub main wiring with FRLSH two single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 6.0 Sqmm size drawn through and including not less than 25 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends fixed to the surface of wall/ceiling including one run of 6.0 Sqmm PVC insulated and unsheathed FRLSH multi stranded copper conductor cable for earth wire continuity conductor. |
| 202 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 10 Sqmm 2 Core complete all as specified & directed by EIC. |
| 203 | Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including4mm suspension wire, one twin core cable flat or circulat of size 6 Sqmm 2 Core complete all as specified & directed by EIC. |
| 204 | Supply and Fixed single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of cap 20A complete all as specified and directed. |
| 205 | S&F in replacement PVC casing and caping 25 X 16 mm in size or as required at site with accessories fixed on surface on walls/ceiling by means of PVC sleeves, Dash fastners and cadmium plated screws including putting in existing copper/aluminium cables complete all as specified and directed. |
| 206 | SITC Bed side Reading light suitable for VIP room/Officer accomodation and residential bedroom application, 8-10 Watt, 800 to 1000 lumens , CRI > 80, 3000K/4000K/6000K, elegant design, energy efficient LED light source, manufactured from high quality and durable materials with focused glare-free illumination, flexible/adjustable arm or fixed modern arhitrctural pattern as approved by EIC and shall be made of high quality powder coated die cast aluminium/MS body with superior finish and polycarbonate/acrylic diffuser, conforming to latest IS standards with long life and superior illumination quality with all accessories and electrical connection as required & all as specified and directed by EIC. White/Black/ equivalent as approved by Engineer-in-charge. |
| 207 | Supply & fixing of Recess LED 2x2 luminaire with CRCA powder coated housing suitable with high transmittance opal diffuser for glare free symmetric lightb distribution for general lighting in office areas. The luminaire should have a color consistency SDCM < 5, CRI > 80 and CCT of 3200K/4000 K/6500K. The luminaire shall be compliant with IP20 and IK02 classification. Luminaire shall be designed to emit at least 3420 nominal lumens and an outstanding System efficacy of greater than 113 lumen/watt and maximum system wattage of 30 Watts.The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor >0.95 and THD <10% , EMC EMI CISPR 15 complaint, Ripple <5% (Flicker Free), Short-circuit protection, 4KVA Surge and suitable for an operating voltage range of 140-270V AC. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters. |
| 208 | SITC of decorative wall light fixture made up of polycarbonate/glass die cast aluminium housing with poder coated finish 10 W to 15 W with a nominal efficiency 105 lumen/watt ,IP43 protection and BIS certified inbuilt LED driver, glare free uniform illumination complete with mounting base, hardware, lamp and connection as required at site all as specified and directed by EIC. |
| 209 | S & F surface mounted LED Battern with LED tube rod 2 Feet 10W with a nominal efficiency 105 lumen/watt, internal surge protection device of 4 KV with voltage band 140-280V and making electrical connection to ceiling rose all as directed. |
| 210 | Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W LED with a nominal efficiency 105 lumen/watt , IP65 protection suitable for Pole dia 76mm pole complete with all accessories. Luminaire shall be made of pressure die cast/spun aluminium housing with high transmission clear diffuser, corrosion resistant powder coated finish, high efficiency LED driver with surge protection, minimum system efficacy 100 lm.W, CCT 3000K/4000K/6500k, CRI > 80, operating voltage 140-270 V AC complete all as directed by EIC. Please Enable Macros to View BoQ information |
| 211 | Supply and fixing of new generation, post top, energy saving spun aluminium landscape luminaries with high power 40W LED with a nominal efficiency 105 lumen/watt , IP65 protection suitable for Pole dia 76mm pole complete with all accessories. Luminaire shall be made of pressure die cast/spun aluminium housing with high transmission clear diffuser, corrosion resistant powder coated finish, high efficiency LED driver with surge protection, minimum system efficacy 100 lm.W, CCT 3000K/4000K/6500k, CRI > 80, operating voltage 140-270 V AC complete all as directed by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender