Defence Statutory Bodies & Commissions/Committees Closing in 2 days TDR #58366881

Tender For Repairs/Maint To Approach Path, Paver Block And Other Misc Allied Works At Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar

Issued by Statutory Bodies & Commissions/Committees · Aurangabad, Maharashtra
Tender Value
48 Lakhs
Estimated cost
Bid Submission
24 Nov 2026
2 days left
EMD
96000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Aurangabad → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Repairs/Maint To Approach Path, Paver Block And Other Misc Allied Works At Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 11-Nov-2026 Corrigendum1 Other 24-Nov-2026

BOQ

Name of Work:- REPAIRS/MAINT TO APPROACH PATH, PAVER BLOCK AND OTHER MISC ALLIED WORKS AT CHH SAMBHAJINAGAR MIL STATION UNDER GE(S) AHILYANAGAR
Sl. No. Item Description
1Dismantling of stone slab and tiles/ interlocking paver block laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed.
2M&L for machine pressed chequered cement concrete tiles, glossy finish, rubberized of size 25cm x 25cm x 25mm / 30cm x 30cmx25 mm thick as in floors, set jointed and pointed in neat cement slurry with grey cement and pigments over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified & as directed.
3M&L for 60mm thick factory made chamfered edge, cement concrete paver blocks of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note:- Colour, design and shade shall be approved by GE.
4M&L for 80mm thick factory made chamfered edge, cement concrete paver blocks of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note:- Colour, design and shade shall be approved by GE.
5Fixing only cement concrete paver blocks as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note: Old cement concrete paver blocks of any type and size retrieved from dismantling shall be reused under this item.
6M&L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required and taking down old damaged kerb stone complete all as specified and as directed.
7M&L for machine cut Kota stone flooring 18 to 22 mm thick (minimum size of kota stone slab 22\\"x18\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.
8All as per item No 7.00 here in before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick in cement mortar 1:3 all as specified and as directed. Note: Risers provided to steps shall be in one piece.
9M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed.Note: Treads provided to steps shall be in one piece.
10M&L for 15-18 mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/plateform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge / GE.
11Demolition of cement concrete in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed.
12M&L for 100 mm thick, PCC 1:2:4, type B1 (using 20 mm graded stone aggregates) as in flooring, including compaction and vibration with mechanical compactor machine finished with power trowel cum Floater machine including necessary form work to excute work in laid in alternate bays, finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed.
13M&L Forming for forming 12 mm thick and 100 mm high expension joints filled with preforms bituminious filler and deep 30 mmprimed and sealed with sealing compound grade A complete all as specified and as directed by Engr-in-Charge..
14M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in sub-base of flooring, etc complete all as specified and as directed.
15M&L for 75mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) as in plinth protection, etc finished the surface even and smooth without using extra cement including provision of joint of size 10 mm wide & 10 mm deep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.
16Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and directed.
17M&L for coloured non-skid ceramic tiles, 7 to 8 mm thick (square or rectangular), area of each tiles exc 0.06 Sqm but n exc 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over & including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge.
18M & L for Non-skid coloured Ceramic tiles mat finish 7 to 8 mm thick (Square / Rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm (600x600mm) in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and directed.Note :- Colour and shade shall be approved by Engr-in-Charge.
19All as per item No 18 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.
20M & L for Vitrified tiles double charged (light shade) 8 to 9mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm (600x600mm), in floors etc set and jointed in neat cement slurry and pointed in white cement to match with tile laid over and including screed bed or bedding layer of 15 mm thick in CM (1:6), complete all as specified and as directed.Note :- Colour and shade shall be approved by Engr-in-Charge.
21All as per item No 20 above but as in skirting set and jointed in neat cement and pointed in white or coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.
22M&L for glazed coloured ceramic tiles (shade as approved by GE) of size 450mm x 300mm x 7 mm thick, as in dado, skirting, risers to step etc laid over and including 10 mm thick plastering in CM 1:4 in cement mortar on vertical surfaces , jointed in neat cement slurry and pointed in coloured cement to match with colour of tiles complete all as specified and as directed.
23Dismantling fencing posts or struts (wood, steel or R.C.C.) any section complete all as specified and directed.
24Excavation in post holes, in any type of soil each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed.
25M&L for PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundations filling and mass concrete for fixing fencing posts and similar work complete all as specified and as directed.
26S&F mild steel as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
27M&L for preparation of new steel and iron surfaces of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
28M&L for 45 to 50mm thick Prestressed precast reinforced cement concrete solid slabs finished fair on both sides in Prestressed cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) (with interlocking joints as directed) including mouldings and fixed as compound wall in grooves of Prestressed posts as per approved design and pattern and set in cement mortar 1:4 complete all as specified and as directed. Note : (a) The cost of reinforcement and form work shall deemed to be included in rate quoted.(b) Surface area of slabs excluding embedded portion in grooves shall be measured for payment. (c) Prestressed concrete posts shall be measured and paid separately.
29M&L for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) solid slabs finished fair on both sides as in wall panels for compound wall including interlocking arragements with precast RCC columns and adjacent wall panels as per approved design/patterns, set in cement mortar 1:4, (measured solid) including all mouldings but excluding frame (columns) complete all as specified and as directed.Note: (i) The cost of reinforcement and form work shall deemed to be included in the unit rate quoted.(ii) Columns/ posts shall be measured and paid seperately(iii) Surface area of slabs excluding embedded portion in grooves shall be measured for payment.
30M&L for Prestressed reinforced cement concrete solid posts with fair faces in precast cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) (with grooves for interlocking of precast slabs as directed) including mouldings and fixed as compound wall posts as per approved design and pattern complete all as specified and as directed. Note : (a) The cost of reinforcement and form work shall deemed to be included in rate quoted.(b) Precast/Prestressed slabs for wall shall be measured and paid separately.
31M&L for brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed.
32M&L for preparation of surfaces of floor and applying one coat of floor guard of any shade as approved by Engr-in-charge complete all as specified and as directed.
33Taking down cement plaster on walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
34M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed.
35M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed.
36S&F in repairs 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber ring joint, laid in trenches or in floors or in masonry as in spouts, weep holes etc complete all as specified and as directed.
37S&F in repairs,110mm bore PVC (SWR) bend any radius, complete all as specified and as directed.
38S&F PVC (SWR),pipes of 75 mm bore single socketed in any length with rubber ring joints fixed to walls, fixed in repairs, complete all as specified and directed.
39S&F in repairs,75mm bore PVC (SWR) bend any radius, complete all as specified and as directed.
40S&F in repairs PVC (SWR) junction of 110 mm bore single, (single T) equal or unequal, fixed in repairs, complete all as specified and directed.
41S&F in repairs PVC (SWR) junction of 75 mm bore single, (single T) equal or unequal, fixed in repairs, complete all as specified and directed.
42M&L for cement concrete 1:3:6, type C-1, using 20mm graded stone aggregate as in copings, haunchings and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating, as directed complete all as spcified and as directed.
43S&F 6mm thick hollow twin wall polycarbonate sheet in any colour (colour approved by GE/Engr-in-charge) including necessary self tapping screw for fixing and taking down of old sheets complete all as specified and as directed by Engr-in-Chargre.
44M&L for PCC 1:2:4, type B1, using 20mm graded stone aggregate for fixing of angle iron/ flat iron on top of compound wall and similar work including necessary form work complete all as specified and as directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58366881
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 48 Lakhs
LAST DATE 24-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Repairs/Maint To Approach Path, Paver Block And Other Misc Allied Works At Chh Sambhajinagar Mil Station Under Ge(S) Ahilyanagar
Basic Detail
Tender No 8406/E8
Bidding Type Tender
Location
City Aurangabad
State Maharashtra
Key Dates
Publish Date 11 Nov 2026
Submission Date 24 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 48 Lakhs
Tender Fee 500
EMD 96000
Exemption Available
Document List
8406Tenderdocuments.pdf
aa816e49-b73d-4d14-92a4-9f2a77de93c2.html
BOQ_894260.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 11, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 2 days
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
pdf

8406Tenderdocuments.pdf

html

aa816e49-b73d-4d14-92a4-9f2a77de93c2.html

xls

BOQ_894260.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender