Tender For electrical installation Work At Nadia Division Office And Bungalow, Krishnagar, Nadia (Job No.Ned/Kng/Dw/11/01 Of 26-27).
Tender Value
1.80 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
3607
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nadia → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for electrical installation Work At Nadia Division Office And Bungalow, Krishnagar, Nadia (Job No.Ned/Kng/Dw/11/01 Of 26-27).
BOQ
| Sl. No. | Item Description |
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. [DSR(E&M)2025/P3/1.10] (Make of wire - RR/KEI/Polycab/Havells/Gloster) |
| 2 | Group C |
| 3 | LED Batten light (System lumen efficacy ≥105 <120 lm/Watt).Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140- 270 Volt, frequency 50/60 hz, Operating temp range -5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating andFixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. completein all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder Coated CRCA Sheet Body (Thickness > 0.50 mm) [DSR(E&M)2025/P46/8.9] (make - Philips/Wipro/Crompton/Havells/Jaquar) |
| 4 | 18- 22 Watt |
| 5 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. [DSR(E&M)2025/P3/1.14] |
| 6 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire (RR/KEI/Polycab/Havells/Gloster) |
| 7 | Supply and delivery of 6 Metre Steel tubular Pole,6 Metre long octagonal poles with a shaft thickness of 3 mm, featuring the following specifications :Top Across Flats (A/F) : 15 mmBottom Across Flats (A/F) : 40 mmWeight : 62 kgWind Load Design : Suitable for wind speeds up to 180 km/h, in accordance with IS:875Bracket Provision: Supplied with a suitable bracket arrangement for installation of one or two LED street lightsMaterial Specifications :A) The shaft shall be manufactured from S355JO/JR grade steel as per BS EN 10025, or E350 BR grade as per IS:2062 (or equivalent).B) The base plate shall be of E250 BR grade as per IS : 2062.C) Hot-dip galvanization shall be carried out in accordance with BS EN ISO 1461.[Make :- Bajaj / Valmont / Transrail ]Note : The Test Certificate and Warranty Certificate from the Original Equipment Manufacturer (OEM) shall be submitted to the Engineer-in-Charge (EIC) for review and must be approved prior to execution of the work. |
| 8 | Erection of RCC/ PCC pole of following length in brickballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required.Above 4.5 Meter and upto 6.5 Meter [DSR(E&M)2025/P 72/12.1.1] |
| 9 | Supplying & Fixing CI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted CI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint. |
| 10 | S&F jacket single arm header assembly having 100mm dia top cap of 0.30mtr long duly welded with 1.5mtr long 40mm dia pipe arm brackey detachable type at an angle 110degree with the pole incl painting with 2 coats of synthetic enamel paint over a cost of R.O primer as to GS. |
| 11 | LED Street light fixture, powder coated pressure die cast aluminium body (System lumen efficacy ≥120 <135 lm/Watt) Supplying, installation, Testing & Commissioning of Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver efficiency >85%, Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMIEMC As per CISPR 15 , lenses for beam angle as per IESNA type I/II/III as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). [DSR(E&M)2025/P51/8.13] |
| 12 | 72 watt (Philips/Wipro/Crompton/Havells/Jaquar) |
| 13 | Supply and delivery of 1.1 KV grade 2 core 6 sq.mm PVC Aluminum armored cable (Make- Polycab/Havells/RR/KEI/Gloster) |
| 14 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. [DSR(E&M)2025/P66/10.7] |
| 15 | Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 16 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. [DSR(E&M)2025/P66/10.8] |
| 17 | Upto 35 sq. mm |
| 18 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. asrequired.[DSR(E&M)2025/P 7/1.24.3]. |
| 19 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required.a01 or 2 Module (75mmX75mm).[DSR(E&M)2025/P 7/1.27.1]. |
| 20 | Supply & Delivery of 240V 9 W LED lamp (minimum Luminous Efficacy 100lm/w.) (Make : Crompton/ wipro/ Bajaj/ Havells/Jaquar) |
| 21 | Supply, installation, testing and Commissioning of Glow sign Board structure (Size- 12' x 4') with ACP box supported structure made with 50x50x5 mm M.S angle iron frame Fabricated all around. The 3mm ACP facial should be provide with Laser cutting of 6mm laser cut acrylic letter out of which 5 mm rising and border line of side should be cover 40mm x 40mm x 1.6 mm aluminum angle 1.5\\" aluminum channel, as per direction of EIC. The sign board should be illuminated by 18W LED tube light fittings (12Nos) [Make- Philips, cat no TMC 501 P1 x TLED 22W P3242) with 18 W LED T-8 light (Type MAS LED tube 1200mm 18 W 865 T 8I) to be fixed on flat iron structure fabricated for fixing purpose with Bakelite terminal box. Back side of the board should be covered with 18 SWG MS sheet to protect the rain water. Ventilation system & hinges doors to be provided on back side of the stricture for fixing electrical fittings including nuts, bolts and washer etc. The complete glow sign board is to be fixed ON WALL with proper \\"L\\" clap system. LED tube light fittings should be connected with 15Amp Kit Kat fuse with necessary connection by 1.5 sq mm copper wire for its internal wiring including supplying PVC box with 1 no Piano switch of 15Amp from its nearest power supply. [NS] NOTE:- NOMENCLATURE IS AS ATTACHED DOCUMENTS. SIZE OF THE BOARD [12' X4' X 10\\" ]` .[NS]. |
| 22 | LED Flood Light, powder coated pressure die cast aluminium (System lumen efficacy ≥120 and <135 lm/Watt).Supplying, Installation, Testing & Commissioning of Flood Light, powder coated pressure die cast aluminium body with built in or separate driver as per the requirement with Driver efficiency >85%, Input voltage: Input voltage: 140-270 Volt AC, frequency 50/60 hz, Operating temp range -5 0C to 50 0C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency >85%,THD < 10% as per IEC 61000-3-2, P. F.≥0.95, IP-66,IK-10, CRI >70, under voltage and over voltage protection, EMI-EMC as per CISPR-15, lenses for beam angle 30 deg-120deg as per the application and the project requirement, suitable tilt able fitting, life time (LED, Driver & electrical circuitry) of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <5, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 and <135 lm/Watt output . LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted.. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). (make - Philips/Wipro/Crompton/Havells/Jaquar) |
| 23 | 100 watt [DSR(E&M)2025/P53/8.16.3] |
| 24 | 250 watt [DSR(E&M)2025/P53/8.16.6] |
| 25 | Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. [DSR(E&M)2025/P30/5.2] |
| 26 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.[DSR(E&M)2025/P32/5.16] |
| 27 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.[DSR(E&M)2025/P32/5.20] Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender