Tender For Supply Of Material Item Related To Vb-G Ram G Scheme Under Goghat-I Block
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
5 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hooghly → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Of Material Item Related To Vb-G Ram G Scheme Under Goghat-I Block
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Nov-2026 | DATE TIME EXTEN | Date | 17-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply of Different Material Item related to VB-G RAM G Scheme |
| 2 | Hire charges of Coaltar Boiler 900 to 1400 litres |
| 3 | Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper |
| 4 | Hire charges of Diesel Road Roller- 8 to 10 tonne |
| 5 | Production cost of concrete by batch mix plant |
| 6 | Hire charges of Diesel Truck-9 tonne |
| 7 | Hire charges of sparaying machine including electric charges |
| 8 | Hire charges of coaltar Sprayer |
| 9 | Hire charges of Barber green, drying,mixing and Asphalt Plant, with accessories, capacity 30/45 tonne |
| 10 | Pumping charges of concrete including Hire charges of pump, piping work & accessories etc. |
| 11 | Hire charges of Derrick monkey rope |
| 12 | Hire charges of Pump set of capacity 4000 litres/hour |
| 13 | Vibrator (Needle type 40 mm) |
| 14 | Machine for rubbing of floors |
| 15 | Front end loader capacity 1.00 cum |
| 16 | Hire and running charges of Tripod and Mechanical Winch machine complete with power unit and accessories |
| 17 | Mastic Cooker |
| 18 | Hire and running charges of tipper |
| 19 | Hire and running charges of loader |
| 20 | Hand Grinder for mirror polish |
| 21 | Hydraulic Excavator (3D) with driver and fuel |
| 22 | pin vibrator |
| 23 | Surface Vibrator |
| 24 | Hot Bitumen Mixer 0.5cum i/c hand cart |
| 25 | Hire and running charges of hydraulic piling with power unit etc. including complete accessories and shifting at site |
| 26 | Hire and running charges of light crane |
| 27 | Hire and running charges of bentonite pump |
| 28 | Hire and running charges of vibrating pile driving hammer complete with power unit and accessories |
| 29 | Hire and running charges of crane 20 tonne capacity |
| 30 | Carriage of concrete by transit mixer |
| 31 | Generator 250 KVA |
| 32 | Paint applicator |
| 33 | Mobile crane |
| 34 | Tractor with ripper attachment |
| 35 | Tractor with trolley |
| 36 | Air compressor 250 cm with two leads for pneumatic cutters/hammers |
| 37 | joint cutting machine with 2-3 blades |
| 38 | C.C.batch mix plant |
| 39 | Road Sweeper |
| 40 | Slip form paver with sensor |
| 41 | Water tanker 5000 Ltr. Capacity |
| 42 | Concrete joint cutting machine |
| 43 | Texturing machine |
| 44 | Dozer D-80-A12 |
| 45 | Motor Grade 3.35 meter blade |
| 46 | Hydraulic Excavator of 1 cum bucker |
| 47 | Front end loader 1 cum bucket capacity (incl POL) |
| 48 | Tipper -5 cum |
| 49 | Vibratory roller 8 to 10 tonne |
| 50 | Smooth Wheeled Roller 8 to 10 tonne |
| 51 | Tandem Road Roller |
| 52 | Water Tanker 5 to 6 KL Capacity |
| 53 | Air Compressor |
| 54 | Wet Mix Plant 60 TPH |
| 55 | Mechanical Broom Hydraulic |
| 56 | Emulsion Pressure Distributor @1750 sqm per hour |
| 57 | Hot Mix Plant - 120 TPH capacity |
| 58 | Hot Mix Plant 100 TPH Capacity |
| 59 | Paver finisher Hydrostatic with sensor control 100 TPH |
| 60 | Paver finisher Mechanical 100 TPH |
| 61 | Batching and Mixing Plant @75 cum per hour |
| 62 | Concrete Paver finisher with 40 HP Motor and sensor |
| 63 | Generator 250 KVA |
| 64 | Generator 100 KVA/125 |
| 65 | Truck 5.5 cum/ 10 tonnes |
| 66 | Road sweeper (Mechamical Broom) @ 1250 sqm per hour |
| 67 | Drum Type HMP of 60-90 TPH Capacity @ 75 tonne per hour actual output |
| 68 | Hire and running charges of drill Machine up to 400 mm dia (including cost of mobile oil, disesel consumption in ordinary soil operator) |
| 69 | Pile integrity testing equipment |
| 70 | Excavation of Diaphragm wall by Mechanical Grab |
| 71 | Hire charges of TATA 407 or equivalent for local shifting |
| 72 | Hire charges of Diesel truck - 9 tonne (without POL) |
| 73 | Using cost of Ultra Voilet Radiation tube |
| 74 | Compressor, gun, rubber pipes & other accessories - hire charge of plant & machinery i/c necessary fuel |
| 75 | Hire Charges of Suction Jeting machine 2200 PSI machine i/c POL and operator |
| 76 | Hire Charges of Drill machine upto 30 mm dia |
| 77 | Hire charges of sand blasting equipment |
| 78 | Hire charges of compressor |
| 79 | Welding charges of shear key to existing reinforcement |
| 80 | Hire charges of plant and machinery that can inject 350 kg/day |
| 81 | Seam bolts and nuts 6 mm dia and 25 mm long |
| 82 | Fibre (high impact poly propelene reinforced) cement corrugated sheet 6 mm thick |
| 83 | Fibre (high impact poly propelene reinforced) cement close fitting adjustable ridge |
| 84 | Fibre (high impact poly propelene reinforced) cement corrugate serrated adjustable ridge |
| 85 | Fibre (high impact poly propelene reinforced) cement plain wing adjustable ridge |
| 86 | Fibre (high impact poly propelene reinforced) cement unserrated adjustable ridge for hips |
| 87 | Fibre (high impact poly propelene reinforced) cement corrugated apron piece |
| 88 | Fibre (high impact poly propelene reinforced) cement eaves filler piece |
| 89 | Fibre (high impact poly propelene reinforced) cement north light curves |
| 90 | Non-Asbestos fibre (high impact poly propelene reinforced) cement ventilator curves |
| 91 | Fibre (high impact poly propelene reinforced) cement barge boards 6 mm thick |
| 92 | Fibre (high impact poly propelene reinforced) cement ridge finial |
| 93 | Fibre (high impact poly propelene reinforced) cement special north light curves |
| 94 | Fibre (high impact poly propelene reinforced) cement S type louvers |
| 95 | Multi purpose fibre (high impact poly propelene reinforced) cement board 6 mm thick |
| 96 | Multi purpose fibre (high impact poly propelene reinforced) cement 8 mm thick |
| 97 | 6 mm thick heavy duty fiber cement board |
| 98 | 8 mm thick heavy duty fiber cement board |
| 99 | 9 mm thick heavy duty fiber cement board |
| 100 | 12.5 mm thick Gypsum plaster board |
| 101 | 6 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 102 | 8 mm thick multipurpose cement bonded wood particle board conforming to IS : 14276 |
| 103 | Brick Aggregate (single size):63 mm nominal size |
| 104 | Brick Aggregate (single size):50 mm nominal size |
| 105 | Brick Aggregate (single size):40 mm nominal size |
| 106 | Stone Aggregate(single size):63 mm nominal size |
| 107 | Stone Aggregate(single size):50 mm nominal size |
| 108 | Stone Aggregate(single size): 40 mm nominal size |
| 109 | Stone Aggregate(single size):25 mm nominal size |
| 110 | Stone Aggregate(single size):20 mm nominal size |
| 111 | Stone Aggregate(single size): 12.5 mm nominal size |
| 112 | Stone Aggregate(single size): 10 mm nominal size |
| 113 | Stone Aggregate(single size): 06 mm nominal size |
| 114 | Safeda ballies 125 mm diameter |
| 115 | Cowdung |
| 116 | Bajiri |
| 117 | Bamboo 25 mm dia 2.5 meter long |
| 118 | Bhusa |
| 119 | Paving bitumen of grade VG 10 of approved quality |
| 120 | Bitumen emulsion |
| 121 | Bitumen grade PMB - 40 |
| 122 | Blown type petroleum bitumen of penetration 85/25 of approved quality |
| 123 | Bitumen hot sealing compound : grade A |
| 124 | Bitumen solution primer of approved quality |
| 125 | Premoulded joing filler 12 mm thick |
| 126 | Bitumen felt fibre base (vegetable or animal): Type 2 grade 1 |
| 127 | Bitumen felt as per IS 7193 Grade II |
| 128 | Bitumen felt : Type 3 grade 1 |
| 129 | Separation Membrane of impermeable plastic sheeting 125 micron thick |
| 130 | Coal Tar |
| 131 | Blasting powder |
| 132 | Blasting fuse (fuse wire) |
| 133 | White face insulating board : 12 mm thick |
| 134 | Natural colour insulating board : 12 mm thick |
| 135 | Flame retardant face insulating board : 12 mm thick |
| 136 | Flame retardant face inslulating, impregnated fibre board 12 mm thick |
| 137 | Flat pressed 3 layer particle board (medium density) Grade 1,12 mm thick |
| 138 | Extra for veneered particle board with : Teak veneering on one side and commercial veneering on other side |
| 139 | Extra for veneered particle board with Commercial veneering on both sides |
| 140 | Extra for veneered particle board with Teak veneering both sides |
| 141 | Curing compound |
| 142 | Integral cystalline slurry |
| 143 | Integral crystalline admixture |
| 144 | Crystalline mortar |
| 145 | Integral cystalline dry shake |
| 146 | Swellable type water stop tape |
| 147 | Primer for swellable type wate stop tape |
| 148 | Polymer modified adhesive mortar |
| 149 | Brick bats |
| 150 | Wire brush |
| 151 | Soft brush |
| 152 | Portland Cement |
| 153 | White cement |
| 154 | Plastic sheath,1.25 mm thick for dowel bars |
| 155 | Coal (steam) |
| 156 | Sealant primer |
| 157 | Cramp Gun metal 25x6x300 mm |
| 158 | Pre moulded joint filler, 25mm thick for expansion joint |
| 159 | Brass butt hinges (light /ordinary type):125x70x4 mm |
| 160 | Brass butt hinges (light /ordinary type) : 100x70x4 mm |
| 161 | Brass butt hinges (light /ordinary type) : 75x40x2.5 mm |
| 162 | Brass butt hinges (light /ordinary type) : 50x40x2.5 mm |
| 163 | Brass butt hinges (heavy type) :125x85x5.5 mm(0.70 kg) |
| 164 | Brass butt hinges (heavy type) : 100x85x5.5 mm (0.56kg) |
| 165 | Brass butt hinges (heavy type): 75x65x4.0 mm (0.20 kg) |
| 166 | Brass parliamentary hinges 150x125x27x5 mm |
| 167 | Brass parliamentary hinges 125x125x27x5 mm |
| 168 | Brass parliamentary hinges 100x125x27x5 mm |
| 169 | Brass parliamentary hinges 75x100x20x3.2 mm |
| 170 | Brass single acting spring hinges 150 mm |
| 171 | Brass single acting spring hinges 125 mm |
| 172 | Brass single acting spring hinges 100 mm |
| 173 | Brass double acting spring hinges 150 mm |
| 174 | Brass double acting spring hinges 125 mm |
| 175 | Brass double acting spring hinges 100 mm |
| 176 | Brass tower bolt (barrel type) 250x10 mm |
| 177 | Brass tower bolt (barrel type) 200x10 mm |
| 178 | Brass tower bolt (barrel type) 150 x 10 mm |
| 179 | Brass tower bolt (barrel type) 100 x 10 mm |
| 180 | Brass flush bolt 250 mm |
| 181 | Brass flush bolt 150 mm |
| 182 | Brass flush bolt 100 mm |
| 183 | Brass handles 125 mm with plate 175x32 mm |
| 184 | Brass handles 100 mm with plate 150x32 mm mm |
| 185 | Brass handles 75 mm with plate 125x32 mm |
| 186 | Brass door latch 300x16x5x mm (0.380 kg) |
| 187 | Brass door latch 250x16x5 mm (0.350 kg) |
| 188 | Brass mortice latch and lock 100 x 65 mm with6 levers and a pair of brass lever handles |
| 189 | Brass mortice latch 100x65 mm with a pair of brass lever handles |
| 190 | Brass 150 mm floor door stopper (0.357 kg) |
| 191 | Brass hard drawn hooks and eyes 300 mm |
| 192 | Brass hard drawn hooks and eyes 250 mm |
| 193 | Brass hard drawn hooks and eyes 200 mm |
| 194 | Brass hard drawn hooks and eyes 150 mm |
| 195 | Brass hard drawn hooks and eyes 100 mm |
| 196 | Brass casement window fastener |
| 197 | Brass casement stays (straight peg type ) 300 mm weighing not less than 0.33 kg |
| 198 | Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 kg |
| 199 | Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg |
| 200 | Brass quadrant stays 300 mm |
| 201 | Brass fanlight catch |
| 202 | Brass fanlight pivot |
| 203 | Brass chain with hook for fan light catch |
| 204 | Brass hasps and staples (safety type ) 150 mm |
| 205 | Brass hasps and staples (safety type) 115 mm |
| 206 | Brass hasps and staples (safety type) 90 mm |
| 207 | Brass Night latch |
| 208 | Brass helical spring 150 mm |
| 209 | Brass curtain rod 20 mm dia 1.25 mm thick |
| 210 | Brass curtain rod 25 mm dia 1.25 mm thick |
| 211 | Brass brackets (curtain rods) 20 mm |
| 212 | Brass cupboard knob or wardrobe knob 50 mm |
| 213 | brass screws 50 mm |
| 214 | Brass screws 40 mm |
| 215 | Brass screws 30 mm |
| 216 | Brass screws 25 mm |
| 217 | Brass screws 20 mm |
| 218 | Chromium plated Brass butt hinges (heavy) type 75x65x4 mm (200 gms) |
| 219 | Chromium plated Brass butt hinges (light/ordinary) type 125x70x4 mm |
| 220 | Chromium plated Brass butt hinges (light/ordinary) type 100x70x4 mm |
| 221 | Chromium plated Brass butt hinges (light/ordinary) type 75x40x2.5 mm |
| 222 | Chromium plated Brass butt hinges (light/ordinary) type 50x40x2.5 mm |
| 223 | 75 mm SS fancy handles for kitchen cabinet |
| 224 | 100 mm SS Fancy handles for kitchen cabinet |
| 225 | 125 mm SS fancy handles for kitchen cabinet |
| 226 | Chromium plated Brass handles 125 mm with plate 175x32 mm |
| 227 | Chromium plated Brass handles 100 mm with plate 150x32 mm |
| 228 | Chromium plated Brass handles 75 mm with plate 125x32 mm |
| 229 | Chromium plated Brass mortice latch and lock 100x65 mm with 6 levers and a pair of brass lever handles |
| 230 | Chromium plated brass casement window fastener |
| 231 | Chromium plated Brass casement stays (straight peg type) 300 mm weighing not less than 0.33 kg |
| 232 | Chromium plated Brass casement stays (straight peg type) 250 mm weighing not less than 0.28 |
| 233 | Chromium plated Brass casement stays (straight peg type) 200 mm weighing not less than 0.24 kg |
| 234 | Chromium plated Brass Night latch |
| 235 | Chromium plated Brass Wardrobe Knob 50 mm |
| 236 | Chromium plated Brass Screws 50 MM |
| 237 | Chromium plated Brass screw 40 mm |
| 238 | Chromium plated Brass screws 30 mm |
| 239 | Chromium plated Brass screws 25 mm |
| 240 | Chromium plated Brass screws 20 mm |
| 241 | Chromium plated Brass curtain rod 12 mm dia 1.25 mm thick |
| 242 | Chromium plated Brass curtain rod 20 mm dia 1.25 mm thick |
| 243 | Chromium plated Brass curtain rod 25 mm dia 1.25 mm thick |
| 244 | C. P. Brass Extension Nipple (1/2\\"x2\\" size) |
| 245 | Bright finished or black enameled mild steel butt hinges 125x65x2.12 mm |
| 246 | Bright finished or black enameled mild steel butt hinges 100x58x1.90 mm |
| 247 | Bright finished or black enameled mild steel butt hinges 75x47x1.70 mm |
| 248 | Bright finished or black enameled mild steel butt hinges 50x37x1.50 mm |
| 249 | Nickel plated bright finished mild steel piano hinges 1 mm thick 25 mm wide |
| 250 | Bright finished or black enameled mild steel screws 50 mm |
| 251 | Bright finished or black enameled mild steel screws 40 mm |
| 252 | Bright finished or black enameled mild steel screws 30 mm |
| 253 | Bright finished or black enameled mild steel screws 25 mm |
| 254 | Bright finished or black enameled mild steel screws 20 mm |
| 255 | Bright finished or black enameled mild steel bolts and nuts 50x6 mm |
| 256 | Oxidised mild steel butt hinges 125x65x2.12 MM |
| 257 | Oxidised mild steel butt hinges 100x58x1.90 mm |
| 258 | Oxidised mild steel butt hinges 75x47x1.70 mm |
| 259 | Oxidised mild steel butt hinges 50x37x1.50 mm |
| 260 | Oxidised mild steel parliamentary hinges 150x125x27x2.8 mm |
| 261 | Oxidised mild steel parliamentary hinges 125x125x27x2.8 mm |
| 262 | Oxidised mild steel parliamentary hinges 100x125x27x2.8 mm |
| 263 | Oxidised mild steel parliamentary hinges 75x100x20x2.24 mm |
| 264 | Oxidised mild steel single acting spring hinges 150 mm |
| 265 | Oxidised mild steel single acting spring hinges 125 mm |
| 266 | Oxidised mild steel single acting spring hinges 100 mm |
| 267 | Oxidised mild steel single acting spring hinges 150 mm |
| 268 | Oxidised mild steel double acting spring hinges 125 mm |
| 269 | Oxidised mild steel double acting spring hinges 100 mm |
| 270 | Nickel plated mild steel piano hinges 1 mm thick 35 mm wide |
| 271 | Oxidised mild steel sliding door bolt 300x16 mm |
| 272 | Oxidised mild steel sliding door bolt 250x16 mm |
| 273 | Oxidised mild steel door latch 300x20x6 mm |
| 274 | Oxidised mild steel door latch 250x20x6 mm |
| 275 | Oxidised mild steel tower bolt (barrel type) 250x10mm |
| 276 | Oxidised mild steel tower bolt (barrel type) 200x10 mm |
| 277 | Oxidised mild steel tower bolt (barrel type) 150x10 mm |
| 278 | Oxidised mild steel tower bolt (barrel type) 100x10 mm |
| 279 | Oxidised mild steel handles 125 mm |
| 280 | Oxidised mild steel handles 100 mm |
| 281 | Oxidised mild steel handles 75 mm |
| 282 | Oxidised mild steel hasps and staples (safety type)150 mm |
| 283 | Oxidised mild steel hasps and staples (safety type ) 115 mm |
| 284 | Oxidised mild steel hasps and staples (safety type ) 90 mm |
| 285 | Oxidised mild steel screws 50 mm |
| 286 | Oxidised mild steel screws 40 mm |
| 287 | Oxidised mild steel screws 30 mm |
| 288 | Oxidised mild steel screws 25 mm |
| 289 | Oxidised mild steel screws 20 mm |
| 290 | Anodised Aluminium butt hinges 125x75x4 mm |
| 291 | Anodised Aluminium butt hinges 125x63x4xmm |
| 292 | Anodised Aluminium butt hinges 100x75x4 mm |
| 293 | Anodised Aluminium butt hinges 100x63x3.2 mm |
| 294 | Anodised Aluminium butt hinges 100x63x4 mm |
| 295 | Anodised Aluminium butt hinges 75x63x4 mm |
| 296 | Anodised Aluminium butt hinges 75x63x3.2 mm |
| 297 | Anodised Aluminium butt hinges 75x45x3.2 mm |
| 298 | Anodised Aluminium sliding door bolt 300x16 mm |
| 299 | Anodised Aluminium sliding door bolt 250x16 mm |
| 300 | Anodised Aluminium tower bolt (barrel type)300x10 mm |
| 301 | Anodised Aluminium tower bolt (barrel type) 250 x 10 mm |
| 302 | Anodised Aluminium tower bolt (barrel type) 200x10 mm |
| 303 | Anodised Aluminium tower bolt (barrel type) 150x10 mm |
| 304 | Anodised Aluminium tower bolt (barrel type) 100x10 mm |
| 305 | Anodised Aluminium handles 125 mm with plate 175 x 32 mm |
| 306 | Anodised Aluminium handles 100 mm with plate 150 x 32 mm |
| 307 | Anodised Aluminium handles 75 mm with plate 125 x 32 mm |
| 308 | Anodised Aluminium kicking plate 50 cm long 100x3.15 mm |
| 309 | Block board construction flush door with teak wood ply on both faces 35 mm thick |
| 310 | Block board construction flush door with teak wood play on both faces 30 mm thick |
| 311 | Block board construction flush door with teak wood ply on both faces 25 mm thick |
| 312 | Block board construction flush door with commercial ply on both faces |
| 313 | Block board construction flush door with commercial ply on both faces 30 mm thick |
| 314 | Block board construction flush door with commerciial ply on both faces 25 mm thick |
| 315 | Block board construction flush door lipping |
| 316 | Square vision panel (upto 0.10sqm) in Block board construction flush door |
| 317 | Circular vision panel (upto 0.10 sqm) in Block board construction flush door |
| 318 | Decorative type Louvers (upto 0.20 sqm) in Block board construction flush door |
| 319 | Rebate cutting in Block board construction flush door |
| 320 | Decorative plywood 4 mm |
| 321 | Fuel wood |
| 322 | Calcium silicate base compound for jointing calcium silicate tiles |
| 323 | Hessian cloth |
| 324 | Cement Concrete Jali 50 mm thick |
| 325 | Cement Concrete Jali 40 mm thick |
| 326 | Cement Concrete Jali 25 mm thick |
| 327 | Kerosene oil |
| 328 | White cement based polymer modified self curing compound in powder form |
| 329 | Unslaked lime |
| 330 | Deharadun white lime |
| 331 | Satna lime |
| 332 | Dry hydrated lime (factory made) |
| 333 | Marble dust/ powder |
| 334 | Marble chips up to 4 mm and downsize white &black |
| 335 | Marble chips large size above 4 mm white & black |
| 336 | Silicon and acrylic emulsion |
| 337 | Acrylic distemper Ist quality, having VOC content less than 50 gm/litre |
| 338 | Acrylic emulsion, having VOC content less than 50 gm/litre |
| 339 | Premium acrylic emulsion of interior grade, having VOC content less than 50 gm/litre |
| 340 | Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre |
| 341 | Ready mixed pink or grey primer on wood work(hard and softwood) having VOC content less than 50 gms/litre |
| 342 | Ready mixed red oxide zinc chromatic on steel/ iron work, having VOC content less than 250 gms/litre |
| 343 | Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre |
| 344 | Exterior primer |
| 345 | Moorum |
| 346 | Mud (dry) |
| 347 | Dry distemper |
| 348 | Oil bound washable distemper/ Acrylic distemper |
| 349 | Linseed oil (double boiled) |
| 350 | Cement Primer |
| 351 | Distemper primer |
| 352 | Pink primer (for wood) |
| 353 | White cement based putty |
| 354 | Aluminium paint |
| 355 | Acid proof paint (chocolate or black) |
| 356 | Anticorrosive bituminous paint (black) |
| 357 | Black Japan |
| 358 | Enamel paint |
| 359 | Floor enamel paint in all shades except green |
| 360 | Synthetic enamel paint in black or chocolate shade |
| 361 | Synthetic enamel paint in all shades except black or chocolate shade |
| 362 | Plastic emulsion paint |
| 363 | Roofing paint for iron sheets in red colour |
| 364 | White lead |
| 365 | water proofing cement paint |
| 366 | Wax polish (ready made) |
| 367 | Ordinary varnish |
| 368 | Superior copal varnish |
| 369 | Superior spar varnish |
| 370 | Oil type wood preservative |
| 371 | Putty for wood work |
| 372 | pig lead |
| 373 | Premixed super white gypsum plaster |
| 374 | Plaster or paris |
| 375 | Copper pins 6 mm dia 7.5 cm long |
| 376 | Black colour dark shade pigment |
| 377 | Red chocolate, orange, buff or yellow (red oxide of iron) light shade |
| 378 | Green or blue medium shade pigment |
| 379 | Standard holder bat clamps for sand cast iron or cast iron pipes 150 mm dia |
| 380 | Sand cast iron plain shoe 150 mm dia |
| 381 | Copper plate |
| 382 | Pulley 25 mm dia |
| 383 | Rolling shutter made of 80x1.25 mm machine rolled laths |
| 384 | Top cover for rolling shutters 1.25 mm thick |
| 385 | 27.5 cm long wire spring grade no 2 for rolling shutters |
| 386 | Ball bearing for rolling shutters |
| 387 | Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 16.80 sqm area of door |
| 388 | Extra for mechanical devices chain and cranked operation for operating rolling shutters: exceeding 16.80 sqm area of door |
| 389 | Royalty for good earth |
| 390 | Royalty for sludge |
| 391 | Coarse sand (zone III) |
| 392 | Fine sand (zone IV) |
| 393 | Galvanised steel plain sheets |
| 394 | Standard quality hard board sheet 3 mm thick |
| 395 | Standard quality hard board sheet 4.5 mm thick |
| 396 | Shellac |
| 397 | Spirit |
| 398 | Spun yarn |
| 399 | Mild steel round bar 12 mm dia and below |
| 400 | Mild Steel round bar above 12 mm dia |
| 401 | Average rate of mild steel round bars for reinforcements |
| 402 | Twisted steel/deformed bars |
| 403 | Mild steel square bars |
| 404 | Structural steel such as tees, angles, channels and R.S. joists |
| 405 | Flats up to 10 mm in thickness |
| 406 | Flats exceeding 10 mm in thickness |
| 407 | Mild steel plates |
| 408 | Steel glazed door, window/ ventilator, all members viz, F7D, F4B, K11 and K12B etc. |
| 409 | Mild steel sheets for tanks |
| 410 | Mild steel expanded metal 20x60xmm strands |
| 411 | Mild steel hooks |
| 412 | Mild steel rivets |
| 413 | Hard drawn steel wire fabric |
| 414 | Galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots |
| 415 | Galvanised steel J or L hooks 8 mm dia |
| 416 | Galvanished steel bolts & nuts 10 mm dia and 125 mm long round head with slots |
| 417 | Mild steel bolts 6 mm dia and 25 mm long with hexagonal head |
| 418 | Straining bolts |
| 419 | Galvanished steel barbed wire |
| 420 | Galvanised steel turn buckles |
| 421 | Galvanised steel bolts & nuts 10 mm dia and 27 cm long both sides threaded with 4 galvanised steel nuts |
| 422 | Galvanised steel bolts 10 mm dia and 7 cm long with nuts |
| 423 | Bolts and nuts up to 300 mm in length |
| 424 | Bolts and nuts above 300 mm in length |
| 425 | Iron pintels including weldded pin |
| 426 | Neelgiri grass turf with earth 50mm To 60mm thicknes |
| 427 | Rolling or ramming of ground turf (Grass |
| 428 | Selection No.1 grass turf with earth 50mm To 60mm thickness |
| 429 | Bermuda Grass or Doob Grass |
| 430 | River Pabbles size of 2\\" to 2.50\\" dia in natural colour |
| 431 | Selection No.1 grass at site fresh & from weeds |
| 432 | PVC Hexagonal net (Tuflex or equivalent |
| 433 | Bamboo 18 to 20cm grith and 90 cm Height |
| 434 | Steel beading siz 10 x 10x 106 mm (box type) |
| 435 | Aluminium Plain Strip edging 38x12x3 mm |
| 436 | Glass strip 4 mm thick 40 mm deep |
| 437 | Boundary stone top chisel dressed 15X15X90 cm |
| 438 | Through and bond stone size 24 x 24 x 39cm |
| 439 | Stone for masonry work |
| 440 | Stone for pitching 15 cm x 22.5 cm |
| 441 | Stone dust |
| 442 | Red sand stone block |
| 443 | White sand stone block |
| 444 | White sand stone slab 75 mm thick (un- dressed) |
| 445 | Red sand stone slab 40 mm thick (un-dressed) |
| 446 | White sand stone slab 40 mm thick (un-dressed) |
| 447 | Red sand stone slab 30 mm thick (un-dressed) |
| 448 | Kota stone slab 20 mm to 25 mm thick (semi-polished) |
| 449 | Kota stone slab 25 mm thick (rough chiseled) |
| 450 | Red sand stone slab 45 mm to 50 mm thick (un-dressed) |
| 451 | White sand stone slab 45 mm to 50 mm thick (un-dressed) |
| 452 | Stone grit 6 mm and down size or pea sized gravel |
| 453 | Crushed stone 2.36 mm to 12.5 mm size |
| 454 | Surkhi |
| 455 | Superior class teak wood such as Dandeli, Balarshah or Malabar in planks |
| 456 | First class teak wood in scantling |
| 457 | First class teak wook in planks |
| 458 | Second class teak wood in scantling |
| 459 | Second class teak wood in planks |
| 460 | Second class deodar wood in planks |
| 461 | First class kail wood in planks |
| 462 | Second class kail wood in scantling |
| 463 | Second class kail wood in planks |
| 464 | Sal wood in scantling |
| 465 | Klin seasoned selected sheesham wood planks |
| 466 | Precast terrazzo tiles 22 mm thick (light shade) |
| 467 | Precast terrazzo tiles 22 mm thick (medium shade) |
| 468 | Precast terrazzo tiles 22 mm thick (dark shade) |
| 469 | Precast heat resistant terrance tiles (size 300x300 mm) and 20 mm thick |
| 470 | G.I Limpet washer |
| 471 | Bitumen washer |
| 472 | G.I. Plain washer thick |
| 473 | G.I. Plain washer thin |
| 474 | G.I. Plain washer for seam bolts |
| 475 | Water proofing materials |
| 476 | Welding by gas plant |
| 477 | Welding by electric plant |
| 478 | Whiting |
| 479 | Wire nails |
| 480 | Wire mesh (rabbit) |
| 481 | 20 mm dia holding down bolts |
| 482 | Mild steel sheets with bolts and nuts to rest on pintels |
| 483 | Hard drawn steel wire |
| 484 | Mild steel flat strap fitting |
| 485 | Chequered terrazzo tiles 22 mm thick (light shade) |
| 486 | Chequered terrazzo tiles 22 mm thick (medium shade) |
| 487 | Chequered terrazzo tiles 22 mm thick (dark shade) |
| 488 | Extra for selected planks of second class teakwood |
| 489 | Aluminium Plain Strip edging 57x12x3 mm |
| 490 | Diesel oil |
| 491 | Cutting marble or sand stone slab up to 50 mm thick by mechanical device |
| 492 | Extra for selected planks of first class teakwood |
| 493 | 18 mm thick Flamed finish granite stone slab |
| 494 | 18 mm thick Italian Marble stone slab. Perlato (slab area up to 0.5 sqm) |
| 495 | Commercial LPG in cylinder |
| 496 | Glass mossaic tiles (20 mm x 20 mmx 4 mm). |
| 497 | Tile fixing chemical adhesive |
| 498 | Cement Polymer Grout Compound |
| 499 | Acid for cleaning tiles |
| 500 | Silicon based Joint Sealeant for Tiles |
| 501 | Rubber base Adhesive |
| 502 | Non woven reinforcement Tape |
| 503 | Bleaching powder |
| 504 | Surface box for stop cock |
| 505 | Surface box for sluice valve |
| 506 | Surface box for water meter |
| 507 | C.I. bracket for wash basin and sinks |
| 508 | 8 mm dia C.P. Brass/ S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate for European type W.C. |
| 509 | C.P. brass chain with 32 mm dia rubber plug |
| 510 | C.P.brass chain with 40 mm dia rubber plug |
| 511 | Clamps and M.S. stays including bolts and nuts for 100 mm pipe |
| 512 | M.S. Holder bat clamp of approved design for 100 mm S.C.I pipe |
| 513 | M.S. Holder bat clamp of approved design for 75 mm S.C.I. pipe |
| 514 | Clamps and M.S. stays including bolts and nuts for 50 mm pipe |
| 515 | Clamps and M.S.stays including bolts and nuts for 75 mm pipe |
| 516 | Clearing eye with chain and lid 100 mm dia |
| 517 | Clearing eye with chain and lid 150 mm dia |
| 518 | Brass bib-cock-15 mm dia |
| 519 | Brass bib-cock 20 mm dia |
| 520 | Brass stop-cock 15 mm dia |
| 521 | Brass stop-cock 20 mm dia |
| 522 | Mosquito proof coupling of approved design |
| 523 | C.I. Cover and frame 300X300 mm inside |
| 524 | C.I. Cover without frame 300x300 mm inside |
| 525 | Rectangular cover 455x610 mm with frame (low duty) |
| 526 | Rectangular cover 455X610 mm without frame (low duty) |
| 527 | 500 mm dia cover with frame (medium duty) |
| 528 | 500 mm dia cover without frame(medium duty) |
| 529 | C.I.mouth,brass ferrule 15 mm dia |
| 530 | C.I.mouth, brass ferrule 20 mm dia |
| 531 | C.I.mouth, brass ferrule 25 mm dia |
| 532 | Vitreous china foot rests 250x130x30 mm |
| 533 | C.I. Grating 100x100 mm |
| 534 | C.I. grating 150x150 mm |
| 535 | C.I. grating 180x180 mm |
| 536 | S.C.I. gully or nahani grating 100 mm dia |
| 537 | Rubber insertions for 80 mm dia pipe joints |
| 538 | Rubber insertions for 100 mm dia pipe joints |
| 539 | Rubber insertions for 125 mm dia pip joints |
| 540 | Rubber insertions for 150 mm dia pipe joints |
| 541 | Rubber insertions for 200 mm dia pipe joints |
| 542 | Rubber insertions for 250 mm dia pipe joints |
| 543 | Rubber insertions for 300 mm dia pipe joints |
| 544 | Rubber insertions for 350 mm dia pipe joints |
| 545 | Rubber insertions for 400 mm dia pipe joints |
| 546 | Rubber insertions for 450 mm dia pipe joints |
| 547 | Rubber insertions for 500 mm dia pipe joints |
| 548 | Rubber insertions for 600 mm dia pipe joints |
| 549 | Mirror of superior make glass 60x45 cm |
| 550 | vitreous china pedestal for wash basin |
| 551 | pig lead |
| 552 | Supply and stacking of plant Tecoma gaudichaudi of height 45-60 cm. in earthen pots of size 20 cm |
| 553 | S &S.C.I. standard specials up to 300 mm dia (heavy class) |
| 554 | S&S.C.I.standard specials over 300 mm dia (heavy class) |
| 555 | Flanged C.I. standard specials up to 300 mm dia (heavy class) |
| 556 | Flanged C.I. standard specials over 300 mm dia (heavy class) |
| 557 | Casing pipe 100 mm dia |
| 558 | Flush pipe with union spreaders and clamps all in C.P. Brass for single stall |
| 559 | Flush pipe with union spreaders and clamps all in C.P. brass for double stall |
| 560 | Flush pipe with union spreaders and clamps all in C.P. brass for range of three stall |
| 561 | Flush pipe with union spreaders and clamps all in C.P. brass for range of four stall |
| 562 | Flush pipe and spreaders G.I. for single set of one squatting plate urinal |
| 563 | Flush pipe and spreaders G.I. for range of two squatting plates urinal |
| 564 | Flush pipe and spreaders G.I. for range of three squatting plates urinal |
| 565 | Flush pipe and spreaders G.I. for range of four squatting plates urinal |
| 566 | G.I. pipes 15 mm dia |
| 567 | G.I. pipes 20 mm dia |
| 568 | G.I. pipes 25 mm dia |
| 569 | G.I. pipes 32 mm dia |
| 570 | G.I. pipes 40 mm dia |
| 571 | G.I pipes 50 mm dia |
| 572 | G.I. pipes 65 mm dia |
| 573 | G.I. pipes 80 mm dia |
| 574 | G.I. back (jam) nuts 25 mm dia |
| 575 | G.I.back (jam) nuts 65 mm dia |
| 576 | G.I.tees (equal) 25 mm |
| 577 | G.I. tees (equal) 65 mm |
| 578 | G.I. inlet connection |
| 579 | S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 75mm dia |
| 580 | S.C.I. soil, waste and vent single socketed pipe 1.80 metres long:100mm dia |
| 581 | S.C.I. soil, waste and vent single socketed pipe 1.80 metres long: 150mm dia |
| 582 | S.C.I. plain bend 75 mm dia |
| 583 | S.C.I. plain bend 100 mm dia |
| 584 | S.C.I. plain bend 150 mm dia |
| 585 | S.C.I. bend with access door 75 mm dia |
| 586 | S.C.I. bend with access door 100 mm dia |
| 587 | S.C.I. Plain single equal junctions 75x75x75 mm dia |
| 588 | S.C.I. plainsingle equal junctions 100x100x100 mm dia |
| 589 | S.C.I. single equal junctions75x75x75mm dia with access door |
| 590 | S.C.I. single equal junctions 100x100x100 mm dia with access door |
| 591 | S.C.I. plain double equal junctions 75x75x75x75mm dia |
| 592 | S.C.I. plain double equal junctions 100x100x100x100 mm dia |
| 593 | S.C.I.double equal junctions 75x75x75x75 mm dia with access door |
| 594 | S.C.I.double equal junctions 100x100x100x100 mm dia with access door |
| 595 | Slotted cowl (terminal guard) 75 mm dia |
| 596 | Slotted cowl (terminal guard) 100 mm dia |
| 597 | G.I. Union 15 mm nominal bore |
| 598 | G.I. Union 20 mm nominal bore |
| 599 | G.I. Union 25 mm nominal bore |
| 600 | G.I. Union 32 mm nominal bore |
| 601 | G.I. Union 40 mm nominal bore |
| 602 | G.I. Union 50 mm nominal bore |
| 603 | G.I. Union 65 mm nominal bore |
| 604 | G.I. Union 80 mm nominal bore |
| 605 | Polyethylene water storage tank with cover and suitable locking arrangemnet |
| 606 | Sand cast iron S & S single unequal junctions: 100x100x75x75 mm dia |
| 607 | Sand cast iron S&S single unequal Junction: 100x100x75 mm dia with access dor |
| 608 | Sand cast iron S&S plain double unequal junction: 100x100x75x75 mm dia |
| 609 | Sand cast iron S&S double unequal junction: 100x100x75x75xmm dia with access door |
| 610 | Sand cast iron heel rest bend 75 mm dia |
| 611 | Sand cast iron heel rest bend 100 mm dia |
| 612 | S.C.I. Single equal invert branch of required degree75x75x75x75 mm dia |
| 613 | S.C.I. Single equal invert branch of required degree 100x100x100 mm dia |
| 614 | S.C.I. double equal invert branch of required degree 75x75x75x75 mm dia |
| 615 | S.C.I. double equal invert branch of required degree 100x100x100x100 mm dia |
| 616 | S.C.I. Single unequal invert branch of required degree 100x100x75 mm dia |
| 617 | S.C.I. double unequal invert branch of required degree 100x100x75x75 mm dia |
| 618 | S.C.I. door pieces 75 mm dia |
| 619 | S.C.I.door pieces 100 mm dia |
| 620 | S.C.I. collar 75 mm dia |
| 621 | S.C.I. collar 100 mm dia |
| 622 | Unplasticised P.V.C. connection pipe with brass union 30 cm long 15 mm bore |
| 623 | Unplasticised P.V.C. connection pipe with brass union 30 cm long 20 mm bore |
| 624 | Unplasticised P.V.C. connection pipe with brass union 45 cm long 15 mm bore |
| 625 | Unplasticiesd P.V.C. connection pipe with brass union 45 cm long 20 mm bore |
| 626 | S.C.I hand pump |
| 627 | R.C.C. pipes NP2 class 100 mm dia |
| 628 | R.C.C.pipes NP2 class 150 mm dia |
| 629 | R.C.C. pipes NP2 class 250 mm dia |
| 630 | R.C.C. pipes NP2 class 300 mm dia |
| 631 | R.C.C. pipes NP2 class 450 mm dia |
| 632 | R.C.C. pipes NP2 class 500 mm dia |
| 633 | R.C.C. pipes NP2 class 600 mm dia |
| 634 | R.C.C. pipes NP2 class 700 mm dia |
| 635 | R.C.C. pipes NP2 class 800 mm dia |
| 636 | R.C.C. pipes NP2 class 900 mm dia |
| 637 | R.C.C. pipes NP2 class 1000 mm dia |
| 638 | R.C.C. pipes NP2 class 1100 mm dia |
| 639 | R.C.C. pipes NP2 class 1200 mm dia |
| 640 | R.C.C. collars NP2 class 100 mm dia |
| 641 | R.C.C. collars NP2 class 150 mm dia |
| 642 | R.C.C. collars NP2 class 250 mm dia |
| 643 | R.C.C. collars NP2 class 300 mm dia |
| 644 | R.C.C. collars NP2 class 450 mm dia |
| 645 | R.C.C. collars NP2 class 500 mm dia |
| 646 | R.C.C. collars NP2 class 600 mm dia |
| 647 | R.C.C. collars NP2 class 700 mm dia |
| 648 | R.C.C. Colllars NP2 class 800 mm dia |
| 649 | R.C.C. collars NP2 class 900 mm dia |
| 650 | R.C.C. collars NP2 class 1000 mm dia |
| 651 | R.C.C. collars NP2 class 1100mm dia |
| 652 | R.C.C. collars NP2 class 1200 mm dia |
| 653 | RCC pipe 450 mm dia NP -3 spigot |
| 654 | RCC pipe 600 mm dia NP- 3 spigot |
| 655 | RCC pipe 900 mm dia NP - 3 spigot |
| 656 | RCC pipe 1000 mm dia NP -3 spigot |
| 657 | RCC pipe 1200 mm dia NP - 3 spigot |
| 658 | RCC pipe 1800 mm dia NP- 3 spigot |
| 659 | RCC pipe 450 mm dia NP- 4 spigot |
| 660 | RCC pipe 600 mm dia NP- 4 spigot |
| 661 | RCC pipe 900 mm dia NP- 4 spigot |
| 662 | RCC pipe 1000 mm dia NP- 4 spigot |
| 663 | RCC pipe 1200 mm dia NP- 4 spigot |
| 664 | RCC pipe 1800 mm dia NP- 4 spigot |
| 665 | stoneware pipes grade A (60 cm long) 100 mm dia |
| 666 | Stoneware pipes grade A (60 cm long ) 150 mm dia |
| 667 | Stoneware pipes grade A (60 cm long ) 200 mm dia |
| 668 | Stoneware pipes grade A (60 cm long)230 mm dia |
| 669 | Stoneware pipes grade A (60 cm long) 250 mm dia |
| 670 | Stoneware pipes grade A (60 cm long ) 300 mm dia |
| 671 | Fire clay kitchen sink: 600x450x250 mm |
| 672 | White vitreous china laboratory sink 450x300x150x mm |
| 673 | White vitreous china laboratory sink 600x450x200 mm |
| 674 | White plastic seat (solid) with lid C.P. brass hinges and rubber buffers |
| 675 | Black plastic seat (soild) with lid C.P.brass hinges and rubber buffers |
| 676 | Shower rose C.P brass for 15 to 20 mm intel 100 mm dia |
| 677 | Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia |
| 678 | Dismenteled P or S trap scrap (approx wt 2kg) |
| 679 | Spun yarn |
| 680 | Strainer brass 40 mm dia 1.5 metre long |
| 681 | 15 mm C.P.brass tap |
| 682 | C.P.brass toilet paper holder of standard size |
| 683 | Centrifugally SCI(spun) S & S P or S trap |
| 684 | C.I. trap for standard urinal with vent arm with operating and other couplings in C.P. brass: 50 mm dia |
| 685 | C.I. trap for standard urinal with vent arm with operating and other coupling in C.P. brass: 80 mm dia |
| 686 | C.P. brass trap 40 mm dia |
| 687 | 100 mm S.C.I. trap with vent heel |
| 688 | 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet |
| 689 | 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet |
| 690 | S.W. gully trap type 100x100 mm |
| 691 | S.W. gully trap type 150x100 mm |
| 692 | S.W. gully trap P type 180x150 mm |
| 693 | Vitreous china lipped front urinal |
| 694 | Vitreous china squatting plate urinal |
| 695 | H.P. or L.P. ball valve with polythene floats: 15 mm dia |
| 696 | H.P. or L.P. ball valve with polythene floats: 20 mm dia |
| 697 | H.P. or L.P. ball valve with polythene floats: 25 mm dia |
| 698 | 20 mm dia Gunmetal gate valve with wheel |
| 699 | Brass full way valve with C.I. wheel (screwed end) 25 mm dia |
| 700 | Brass full way valve with C.I. wheel (screwed end) 32 mm dia |
| 701 | Brass full way valve with C.I. wheel (screwed end) 40 mm dia |
| 702 | Brass full way valve with C.I. wheel (screwed end) 50 mm dia |
| 703 | Brass full way valve with C.I. wheel (screwed end) 65 mm dia |
| 704 | Brass full way valve with C.I. wheel (screwed end) 80 mm dia |
| 705 | Gunmetal non-return valve-horizontal (screwed end ) 25 mm dia |
| 706 | Gunmetal non-return valve-horizontal (screwed end ) 32 mm dia |
| 707 | Gunmetal non-return valve-horizontal (screwed end ) 40 mm dia |
| 708 | Gunmetal non-return valve-horizontal (screwed end ) 50 mm dia |
| 709 | Gunmetal non-return valve-horizontal (screwed end ) 65 mm dia |
| 710 | Gunmetal non-return valve-horizontal (screwed end ) 80 mm dia |
| 711 | C.I.Sluice valve (with caps) class I : 100 mm dia |
| 712 | C.I.Sluice valve (with caps) class I : 125 mm dia |
| 713 | C.I.Sluice valve (with caps) class I : 150 mm dia |
| 714 | C.I.Sluice valve (with caps) class I : 200 mm dia |
| 715 | C.I.Sluice valve (with caps) class I : 250 mm dia |
| 716 | C.I.Sluice valve (with caps) class : 300 mm dia |
| 717 | Vitreous China flat back wash basin 630x450 mm |
| 718 | Vitreous China angle back wash basin 600x480 mm |
| 719 | Vitreous china angle back wash basin 400x400 mm |
| 720 | C.P. brass waste 32 mm |
| 721 | C.P. brass waste 40 mm |
| 722 | Vitreous china India type w.c. pan size 580 mm |
| 723 | Vitreous China orrisa type w.c. pan size 580 mm |
| 724 | Vitreous china pedestal type wate closet |
| 725 | Bolts and nuts 16 mm dia 60 mm long |
| 726 | Bolts and nuts 16 mm dia 65 mm long |
| 727 | Bolts and nuts 20 mm dia 65 mm long |
| 728 | Bolts and nuts 20 mm dia 70 mm long |
| 729 | Bolts and nuts 20 mm dia 75 mm long |
| 730 | Bolts and nuts 20 mm dia 80 mm long |
| 731 | Bolts and nuts 24 mm dia 85 mm long |
| 732 | Bolts and nuts 24 mm dia 90 mm long |
| 733 | Bolts and nuts 27 mm dia 100 mm long |
| 734 | White vitreous china dual purpose closet (Anglo Indian W.C.) suitable for use as squatting pan or European type water closet as per manufacture's specifications |
| 735 | Floor mounted white vitrous china double trap syphonic WC with 10 litre cistern and all fittings, seat cover etc |
| 736 | Vitreous china foot rests 250x125x25 mm |
| 737 | Fly ash |
| 738 | Common burnt clay F.P.S. (non modular) bricks tile class designation 10 |
| 739 | Common burnt clay modular bricks class designation 12.5 |
| 740 | Strips-Aluminium fluted 3.15 mm thick and 150 mm wide |
| 741 | Strips-Aluminium fluted 3.15 mm thick and 200 mm wide |
| 742 | 1 mm thick Sstainless Steel Cover plate grade 304 |
| 743 | Coupler 16 mm dia |
| 744 | Coupler 20 mm dia |
| 745 | Coupler 25 mm dia |
| 746 | Coupler 28 mm dia |
| 747 | Coupler 32 mm dia |
| 748 | Complete Roof Joint of 100 mm |
| 749 | Complete Roof Joint of 150 mm |
| 750 | Complete Roof Joint of 200 mm |
| 751 | Epoxy adhesive |
| 752 | Floor Joint of 100 mm |
| 753 | Floor Joint of 150 mm |
| 754 | Floor Joint of 200 mm |
| 755 | Float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) |
| 756 | Float glass sheet of nominla thickness 5.5 mm (weight not less than 13.50 Kg/ sqm) |
| 757 | Float glass sheet of nominal thickness 8 mm (weight not less than 20.00 kg/sqm) |
| 758 | Wall Joint of 100 mm |
| 759 | Wall Joint of 150 mm |
| 760 | Wall Joint of 200 mm |
| 761 | Play wood 5 play with commericila ply on both faces 6 mm thick |
| 762 | 12 mm commercial ply |
| 763 | 18 mm thick block board with commercial ply veneering on both side |
| 764 | 21 mm thick clear toughened Laminated glass for fins with holes |
| 765 | Hollock ballies 125 mm diameter |
| 766 | Oxidised mild steel pull bolt lock (locking bolt) of size 85 mm x 42 mm with screws, bolts, nuts and washers complete |
| 767 | Brass cupboard lock 6 levers of approved quality, 40 mm size |
| 768 | Brass upboard lock 6 levers of approved quality, 50 mm size |
| 769 | Brass cupboard lock 6 levers of approved quality, 65 mm size |
| 770 | Brass cupboard lock 6 levers of approved quality, 75 mm size |
| 771 | Brass hanging type door stopper 150 mm |
| 772 | Hydraulic door closer bottle type M.S. body with necessary accessories and screw complete |
| 773 | Anodised Aluminium hanging type door stopper |
| 774 | Anodised Aluminium pull bolt lock (locking bolt) of size 85 mmx42 mm wutg screws, bolts, nuts and washers complete |
| 775 | Anodised Aluminium Casement stay 250 mm |
| 776 | Hollock wood in scantling |
| 777 | Chromium plated Brass pull bolt lock (locking bolt) of size 85 mmx42 mm with screws, bolts, nuts and washers complete |
| 778 | Nickeled Chromium Brass cupboard lock 40 mm size |
| 779 | Nickeled Chromium Brass cupboard lock 50 mm size |
| 780 | Nickeled Chromium Brass cupboard lock 65 mm size |
| 781 | Nickeled Chromium Brass cupboard lock 75 mm size |
| 782 | Ply wood 5 ply with teak ply on both faces 9 mm thick |
| 783 | Ply wood 5 ply with teak ply on one faces and commercial ply on another face 9 mm thick |
| 784 | Ply wood 75 ply with teak ply on one face and commercial ply on another face 9 mm thick |
| 785 | Pre- laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 |
| 786 | Pre - laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confiriming to IS:14587 |
| 787 | Pre- laminated with decorative lamination side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick confirming to IS: 14587 |
| 788 | Pre- laminated with decorative lamination side and other side balancing lamination exterior Grade - I MDF Board 12 mm thick Confirming to IS:14587 |
| 789 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade- I MDF Board 18 mm thick confirming to IS:14587 |
| 790 | PVC edge bending tape 2.00 mm thick |
| 791 | Pre laminated both side solid foam uPVC profile (45x20mm) |
| 792 | Solid foam uPVC sheet 20mm thick prelaminated on both side |
| 793 | PVC edge beading |
| 794 | Expandable fastner with plastic sleeve |
| 795 | Extra for selectd planks of second class deodar wood |
| 796 | Kiln seasoning of timber |
| 797 | Hollock wood in planks |
| 798 | Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 608 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 60 mm |
| 799 | Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x mm |
| 800 | Carben Steel galvanised dash fastner ( min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 120 mm |
| 801 | Carben steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade sleave, Size 10 mm x 140 mm |
| 802 | Carben Steel galvanised dash fastner ( min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 160 mm |
| 803 | Common burnt clay F.P.S. (non modular) bricks class designation 7.5 |
| 804 | Common burnt clay F.P.S. (non modular) bricks class designation 5.00 |
| 805 | Weather/structural non sage elastomeric PU sealant (600ml Sausage) for joints in RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum/ Alluminium work complying to ASTM C920, DIN 18540- F & ISO 11600 incl all taxes |
| 806 | Structural sealant- 6mm x12 mm |
| 807 | Spacer tape 6.4 mm thick x 6 mm wide |
| 808 | Weather Sealant - Non Staining (600 ml) |
| 809 | Weather Sealant - Normal (300 ml) |
| 810 | MS Brackets / Aluminium Alloy Brackets |
| 811 | Silicon Gasket in kg (Above 50 g/m) |
| 812 | EPDM Gasket in kg(Above 60 g / m) |
| 813 | Anchor Fastner - M10 |
| 814 | SS Bolt with washer of sizes for structural glazing / ACP Cladding |
| 815 | SS Screws of sizes for structural glazing /ACP Cladding |
| 816 | Protective Tape |
| 817 | GI flashing - 1.2 mm thick |
| 818 | 6 mm thick High performance glass |
| 819 | 6 mm thick clear heat strengthened glass |
| 820 | 6 mm thick clear heat strengthened glass |
| 821 | ARMS GS HD - TOP HUNG -20 |
| 822 | Connective Block |
| 823 | Curtain wall striker |
| 824 | Adjustable Fastening Pawl |
| 825 | Corner drive |
| 826 | Top wedge block |
| 827 | Glass wool Density 48 kg/m3 with Block Glass Tissue (BGT) |
| 828 | SS Screws - #8x19 |
| 829 | Weather Sealant - DC 789 |
| 830 | Cement Board |
| 831 | Baker rod |
| 832 | 4 mm thick ACP |
| 833 | Fire Stop |
| 834 | GI/Aluminium Sheet (0.8 mm thick) |
| 835 | GI Screws of guage 10, length 25 mm for fixing cement fibre board to C Section |
| 836 | GI Screws of guage 10, length 45 mm for fixing cement fibre board to C Section |
| 837 | Vapour barrier |
| 838 | Clear toughned interlayed, non-wired fire resistant glass panes of minimum 11 mm thickness (120 minutes fire rating) |
| 839 | G.I. U beading of 1.6 mm thick G.I. sheet with ceramic tape |
| 840 | Ceramic tape 5x20 mm size |
| 841 | Aluminium Strip 40 mm wide and 2 mm thick |
| 842 | Truf Paver (500 x 500x 40 mm) |
| 843 | Ceremic Tiles Pieces for Crazy Flooring |
| 844 | White marble makrana second quality plain veined stone pieces for crazy flooting |
| 845 | FS800H Grade Flooring Panel (Size 600 mmx600 mmx32 mm) |
| 846 | ZInc Electroplated Pedestals - 300 mm |
| 847 | Zinc Electroplated Pedestals - 450 mm |
| 848 | Zinc Electroplated Tube stringer |
| 849 | Machine Screw for Fixing |
| 850 | 8 mm thick granite stone tiles (mirror polished of all shades) |
| 851 | 8 mm thick marble tiles (polished) Raj Nagar |
| 852 | Stone Aggregate (Single size): 100 mm nominal size |
| 853 | Stone Aggregate (single size) : 80 mm nominal size |
| 854 | Stone chippings/ screenings 4.75 mm nominla size |
| 855 | Stone chippings/ screenings 150 micron nominal size |
| 856 | Over burnt (Jhama) Brick Aggregate: 120 mm to 40 mm size |
| 857 | Over burnt (jhama) Brick Aggregate: 90 mm to 40 mm siize |
| 858 | Stone chippings/screenings 12.5/13.2 mm nominal size |
| 859 | Stone Chippings/ screenings 10/ 11.2 mm nominal size |
| 860 | Solvent |
| 861 | Paving Asphalt VG-10 of approved quality |
| 862 | Polyvinyl chloride sheet 400 micron thick |
| 863 | Stone ware spouts 100 mm dia 60 cm long |
| 864 | Galvanised steel corrugated sheets |
| 865 | Gunmetal non-return valve-vertical (screwed end)25 mm dia |
| 866 | Gunmetal non-return valve-vertical (screwed end)32 mm dia |
| 867 | Gunmetal non-return valve-vertical (screwed end) 40 mm dia |
| 868 | Gunmetal non-return valve-vertical (screwed end) 50 mm dia |
| 869 | Gunmetal non-return valve-vertical (screwed end) 65 mm dia |
| 870 | Vitreous china Surgeon type wash basin of size 660x460 mm |
| 871 | 600x120 mm glass shelf with anodised aluminium angle frame, C.P. brass brackets and guard rail of standard size |
| 872 | Vitreous china flat back wash basin 550x400 mm |
| 873 | Gunmetal non-return valve-verticlal (screwed end) 80 mm dia |
| 874 | C.I. sluice valve (with caps) class II : 100 mm dia |
| 875 | C.I. sluice valve (with caps) class II : 125 mm dia |
| 876 | C.I. sluice valve (with caps) class II : 150 mm dia |
| 877 | C.I. sluice valve (with caps) class II : 200 mm dia |
| 878 | C.I. sluice valve (with caps) class II : 250 mm dia |
| 879 | C.I. sluice valve (with caps) class II : 300 mm dia |
| 880 | 15 mm Battery Based Sensor Pillar Cock |
| 881 | CP Brass Union 40 mm dia |
| 882 | C.C.I. (spun) socketed soil, waste and vent pipe 1.80 metres long : 100 mm dia |
| 883 | C.C.I (spun) socketed soil, waste and vent pipe 1.80 meters long : 75 mm dia |
| 884 | S.C.I. S&S bends with access door 100 mm dia |
| 885 | S.C.I. S&S bends with access door 75 mm dia |
| 886 | S.C.I. S&S bend 100 mm dia |
| 887 | S.C.I. S&S bend 75 mm dia |
| 888 | S.C.I. S&S heel rest sanitary bend 100 mm dia |
| 889 | S.C.I S&S heel rest sanitary bend 75 mm dia |
| 890 | S.C.I. S&S single equal junctions 100x100x100 mm |
| 891 | S.C.I. S&S single equal junctions 75x75x75 mm |
| 892 | S.C.I. S&S single equal junctions wtih access door 100x100x100 mm |
| 893 | S.C.I. S&S single equal junctions with access door 75x75x75 mm |
| 894 | S.C.I. S&S double equal junctions 100x100x100x100 mm |
| 895 | S.C.I. S&S double equal junctions 75x75x75x75 mm |
| 896 | S.C.I. S&S double equal junctions with access door 100x100x100x100 mm |
| 897 | S.C.I. S&S double equal junctions with access door 75x75x75x75 mm |
| 898 | S.C.I. S&S single unequal junctions 100x100x75 mm |
| 899 | S.C.I. S&S single unequal junctions with access door 100x100x75 mm |
| 900 | S.C.I. S&S double unequal junctions 100x100x75x75 mm |
| 901 | S.C.I. S&S double unequal junctions with access door 100x100x75x75 |
| 902 | S.C.I. S&S single equal invert branch of required degree 100x100x100 mm dia |
| 903 | S.C.I. S&S single equal invert branch of required degree 75x75x75 mm dia |
| 904 | S.C.I. S&S double equal invert branch of required degree 100x100x100x100 mm dia |
| 905 | S.C.I. S&S double equal invert branch of required degree 75x75x75x75 mm dia |
| 906 | S.C.I. S&S single unequal invert branch of required degree 100x100x75 mm dia |
| 907 | S.C.I. S&S double unequal invert branch of required degree 100x100x75x75xmm dia |
| 908 | S.C.I. S&S, 75 mm offsets for 75 mm dia pipe |
| 909 | S.C.I. S&S, 150 mm offset for 75 mm dia pipe |
| 910 | S.C.I. S&S, 150 mm offset for 100 mm dia pipe |
| 911 | S.C.I. S&S, 114 mm offset for 75 mm dia pipe |
| 912 | S.C.I. S&S, 114 mm offset for 100 mm dia pipe |
| 913 | S.C.I S&S, 152 mm offset for 75 mm dia pipe |
| 914 | S.C.I. S&S, 152 mm offset for 100 mm dia pipe |
| 915 | S.C.I. S&S, door peeces 100 mm dia |
| 916 | S.C.I. S&S, door pieces 75 mm dia |
| 917 | S.C.I. S&S, Slotted Cowl (Terminal Guard) 100 mm |
| 918 | S.C.I. S&S, Slotted Cowl (Terminal Guard) 75 mm |
| 919 | S.C.I. S&S, collars 100 mm |
| 920 | S.C.I. S&S, collars 75 mm |
| 921 | S.C.I. S&S, 75 mm offset for 75 mm dia pipe |
| 922 | S.C.I. S&S, 75 mm offset for mm dia pipe |
| 923 | Vitreous china toilet paper holder of standard size |
| 924 | 560 mm dia cover with frame (Heavy duty) |
| 925 | 560 mm dia cover without frame (Heavy duty) |
| 926 | Galvanized iron (1.6 +/- 0.2 mm) thick reinforcement for small series casement window/ door frame, sash, mulion & small series sliding window frame |
| 927 | Galvanized iron (1.6 +/- 0.2mm) thick reinforcement for big series casement window/ door frame, sash mullion & small series sliding window frame |
| 928 | Galvanized iron (1.6 +/- 0.2mm) thick reinforcement for big series casement door sash |
| 929 | Galvanized iron (1.6 +/- 0.2mm) thick reinforcement for big series sliding window/ door sash |
| 930 | G. I fasteners 100 x 8 mm |
| 931 | Stainless steel (Grade - 304) hollow section round/square tubes |
| 932 | Stainless steel bolts /square bar and plates |
| 933 | Pressed steel door fames (mild steel sheet 1.60 mm ) Profile \\"B\\" |
| 934 | Pressed steel door fames (mild steel sheet 1.60 mm ) Profile \\"C\\" |
| 935 | Pressed steel door fames (mild steel sheet 1.60 mm ) Profile \\"E\\" |
| 936 | Mild steel tubes hot finished welded type |
| 937 | Mild steel tubes hot finished seamless type |
| 938 | Mild steel tubes electric resistant or induction butt welded |
| 939 | Circular C.I. Bok for ceiling fan |
| 940 | Pulley 40 mm dia |
| 941 | Aluminium primer |
| 942 | Red oxide Zinc chromate primer |
| 943 | Copper acetate |
| 944 | Hydrochloric acid |
| 945 | Copper chloride |
| 946 | Copper nitrate |
| 947 | Ammonium chloride |
| 948 | Mobil oil |
| 949 | ss pipe 304 grades with press fit technology as per JIS 3448 Standard 48.60 mm outer dia |
| 950 | Coloured inter locking C.C. paver block |
| 951 | White marble slab Makrana second quality plain veined 18 mm thick |
| 952 | Pink marble slab plain 18 mm thick |
| 953 | Udaypur green marble slab plain 18 mm thick |
| 954 | Black Zebra Marble slab plain 18 mm thick |
| 955 | Sand zone V (Jamuna) |
| 956 | Brass 100 mm mortice latch and lock with 6 levers without pair of handles |
| 957 | Pair Anodised Aluminium lever handles for 100 mm mortice latch and lock |
| 958 | Vitreous china flat back wash basin 450x300 mm |
| 959 | Vitreous china 10 litres low level cistern without fittings |
| 960 | Vitreous china 10 litres low level cistern with fittings |
| 961 | F.P.S. (non modular) clay fly ash bricks class designation 7.5 |
| 962 | 12.5 mm thick tapered edge gypsum plain board |
| 963 | Galvanised Steel celling section (size 80x26x0.50 mm) |
| 964 | Galvanised Steel perimetre Channel (Size 20x27x30x0.50 mm) |
| 965 | Galvanised Steel intermediate Channel (Size 15x45x15x0.90 mm) |
| 966 | Galvanised Steel angle hanger (Celling angle) (Size 25x10x0.50 mm) |
| 967 | Galvanised Steel connecting clips (2.64 dia and 230 mm long GI wire) |
| 968 | Galvanised Steel soffit cleat (Size 27x37x25x0.60 mm) |
| 969 | Joint filler |
| 970 | Joint finisher |
| 971 | Joint tape roll |
| 972 | Dash fastener/chemical Fastener |
| 973 | All drive screws (for gypsum board) |
| 974 | Primer (for gypsum board) |
| 975 | Chlorpyriphos 20% E.C. / Lindane 20% E.C. |
| 976 | Chromium plated brackets (curtain rods) |
| 977 | Acid Proof cement |
| 978 | Self tapping pan head nickel coated mild steel screws of size 13 x 3.2 mm |
| 979 | Fibre joint tape 50 mm wide (90 metre) roll |
| 980 | M.S. Butt hinges 125x90x4 mm |
| 981 | 12.5 mm thick Fully Perforated gypsum board |
| 982 | Galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm |
| 983 | 12.5 mm thick tapered edge gypsum fire resistant board |
| 984 | 12.5 mm thick tapered edge gypsum moisture resistant board |
| 985 | Frosted glass sheet or nominal thickness 4 mm (weighing not less than 10 kg/sqm) |
| 986 | Nickel plated M.S. pipe 25 mm dia. |
| 987 | Nickel plated M.S. pipe 20 mm dia |
| 988 | Nickel palted M.S. Brackets for curtain rod 20 mm |
| 989 | Nickel plated M.S. Bracekts for curtain rod 25 mm |
| 990 | Oxidised mild steel screws 35 mm |
| 991 | Mild steel conduit pipe (heavy type) ISI Marked-20 mm dia. |
| 992 | Mild steel conduit pipe (heavy type) ISI Marked-25 mm dia |
| 993 | Rolling shutters of 80x0.90 mm laths |
| 994 | Rolling shutters of 80x1.2 mm laths |
| 995 | Top cover of Rolling shutters 0.90 mm thick |
| 996 | Top cover of Rolling shutters 1.20 mm thick |
| 997 | Rawl plug 50 mm (designation 10 nos) |
| 998 | Teak wood lipping of size 25x3 mm in pelmets |
| 999 | PU Primer |
| 1000 | 40 mm (average) PU spray having 40-45 kg/m3 density |
| 1001 | GI wire netting 3/4 |
| 1002 | 400 G polythene sheet |
| 1003 | Flat pressed 3 layer and graded particle board (medium density) Grade 1 Conforming to IS : 3087-18 mm thick |
| 1004 | Almonium tee channel (heavy duty) with rollers and stop end |
| 1005 | Aluminium hanging floor door stopper with twin rubber & stopper |
| 1006 | Hydraulic door closer tubular type Aluminium section body |
| 1007 | Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg |
| 1008 | Oxidised M.S. casement stay (straight peg type) 250 mm not less than 0.28 kg |
| 1009 | Oxidised M.S. casement stay (straight peg type)200 mm not less than 0.24 kg |
| 1010 | Extra for providing grilled rolling shutters with 8 mm dia M.S. rod |
| 1011 | Chequered precast cement concrete tiles 22 mm thck using marble chips of size 6 mm - light shade using white cement |
| 1012 | White marble Raj Nagar plain 18 mm thick upto 0.50 sqm area |
| 1013 | Wall mounted water closet |
| 1014 | Adjustable Vetrious China Cistern with fittings |
| 1015 | White Vetrious China Waterless Urinal |
| 1016 | Cistern with fittings for Waterless Urinal |
| 1017 | White Vetrious Urinal |
| 1018 | Acid and alkali resistant tiles 300x300 mm size, 10 mm thick |
| 1019 | S.C.I. Tee 150 mm |
| 1020 | Expanded polystyrene type N- Normal |
| 1021 | Expanded polystyrene type - SE |
| 1022 | Stainless steel kitchen sink - with drain board bowl depth 250 mm |
| 1023 | Stainless steel kitchen sink - with drain board 510x 1040 mm bowl depth 225 mm. |
| 1024 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl |
| 1025 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 178 mm |
| 1026 | Stainless steel kitchen sink - without drain board 610x510 mm bowl depth 200 mm |
| 1027 | Stainless steel kitchen sink - without drain board 610x460 mm bowl depth 200 mm |
| 1028 | Stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm |
| 1029 | Coloured Orissa pattern W.C. pan 580x440 mm |
| 1030 | Coloured Pedestal type W.C. pan 580x440 mm (European type) |
| 1031 | Coloured Vitreous china 10 lit. low level cistern |
| 1032 | Coloured (other than black)solid P.V.C. seat in European W.C. pan |
| 1033 | Circular shape 450 mm dia Mirror with Plastic moulded frame |
| 1034 | Rectangular shape 453x357 mm Mirror with Plastic moulded frame |
| 1035 | Oval shape 450x350 mm (outer dimension) Mirror with Plastic moulded fame |
| 1036 | Rectangular shape 1500x450 mm Mirror with Plastic moulded frame |
| 1037 | Hard board 6 mm thick |
| 1038 | Semi Rigid PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 1039 | Semi Rigid PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 1040 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 32 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 1041 | Flexible (coil shaped) PVC waste pipe for sink and wash basin 40 mm dia with length not less than 700 mm i/c PVC waste fittings |
| 1042 | Bottle Traop |
| 1043 | CP Brass Single lever telephonic wall mixer of approved make |
| 1044 | Coloured High density polyethylene/poly propylene 10 lit. (full flush) capacity controlled low level flushing cistern with fittings |
| 1045 | White Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings |
| 1046 | Coloured Vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings |
| 1047 | S.W. intercepting trap 100 mm dia |
| 1048 | S.W. intercepting trap 150 mm dia |
| 1049 | Rectangular shape 600x 450 mm precast R.C.C. manhole cover with frame - L.D. - 25 |
| 1050 | Square shape 450x450 mm precast R.C.C. manhole cover with frame - L.D. -25 |
| 1051 | Circular shape 450 mm dia precast R.C.C. manhole cover with frame L.D. -25 |
| 1052 | Rectangular shape 500x500 mm precast R.C.C. manhole cover with frame - M.D.-10 |
| 1053 | Circular shape 500 mm dia precast R.C.C. manhole cover with frame - M.D. 1 10 |
| 1054 | Circular shape 560 mm dia precast R.C.C.manhole cover with frame - H.D. - 20 |
| 1055 | Circular shape 560 mm thick shutters with frame E.H.D. -35 |
| 1056 | Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick plain type-I, medium density flat pressed three layer, graded particle board (FPT -I) as per IS:3087 bonded with BWP type |
| 1057 | Factory made 35 mm thick shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick both sides prelaminated type - I, medium density flat pressed three layer, graded particle board (FPT - I) as per IS:3087 bonded with BWP type synthetic resin adhesive, as per IS:848 |
| 1058 | Factory made 35 mm thick shutters with laqminated veneer lumber styles & rails as per TADS 15:1995 and panels of 12 mm thick on e side prelaminated type-I, and other side balancing lamination, medium density flat pressed three layer, graded particle board (FPT-I) as per IS: 3087 bonded with BWP type synthetic resin adhesive, as per IS: 848 |
| 1059 | Factory made 30 mm thick shutters with laminated veneer lumbers styles & rails as per TADS 15:1995 and panels of sheet glass using 10 kg/sqm glass panes |
| 1060 | Factory made 35 mm thck shutters with laminated veneer lumber styles & rails as per TADS 15:1995 and panels of galvanised wire of dia average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm |
| 1061 | Factory made 30 mm thick shutters with laminated veneer lumber styles & rauks as oer TADS 15:1995 and panels of galvanised wire gauge with average width of aperture 1.4 mm in both direction with wire of dia 0.63 mm |
| 1062 | Laminated veneer lumber confirming to TADS 15:1995 manufactured in factory in frames of doors, windows |
| 1063 | Chemical ASTMC- type I |
| 1064 | C.I. pile shoe |
| 1065 | M.S. clamps for pile shoe |
| 1066 | Bentonite |
| 1067 | Oxidised M.S. safety chain (weighing not less than 450 gms) for door |
| 1068 | C.I. grating 150 mm dia, weighing not less than 440 gm |
| 1069 | uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia |
| 1070 | uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia |
| 1071 | uPVC pipes (working pressure 4 kg/cm 2) Rubber (seal) Ring 75 mm dia |
| 1072 | uPVC pipes (working pressure 4 kg/cm2) Rubber (seal) Ring 110 mm dia |
| 1073 | uPVC coupler for uPVC drainage pipes 75 ,mm |
| 1074 | uPVC coupler for uPVC drainage pipes 110 mm |
| 1075 | uPVC pushfit coupler (single) 75 mm thick |
| 1076 | uPVC Pushfit coupler (single) 110 mm thick |
| 1077 | uPVC single equal Tee (without door) 75x75x75 mm |
| 1078 | uPVC single equal Tee (without door) 110x110x110 mm |
| 1079 | uPVC single equal Tee (with door) 75x75x75 mm |
| 1080 | uPVC single equal Tee (with door) 110x110x110 mmmm |
| 1081 | uPVC bend 87.50, 75 mm bend |
| 1082 | UPVCbend 87.50, 110 mm bend |
| 1083 | UPVC plain shoe 75 mm bend |
| 1084 | UPVC plain shoe 110 mm bend |
| 1085 | UPVC pipe clip 75 mm bend |
| 1086 | UPVC pipe clip 110 mm bend |
| 1087 | Resin bonded Glass wool 16 kg/m3 50 mm thick |
| 1088 | Resin Bonded Glass wool 24 kg/m3 50 mm thick |
| 1089 | Fibre glass tissue reinforcemet type II Grade I |
| 1090 | Precast chequered cement tiles 22 mm thick Dark shade using ordinary cement |
| 1091 | Precast chequered cement tiles 22 mm thick medium shade using 50% white cement 50% ordinary cement |
| 1092 | High Allbedo paint |
| 1093 | Epoxy paint |
| 1094 | Fire retardant paint |
| 1095 | Melamine polish |
| 1096 | Table rubbed polished stone 18 mm thick (75x50 cm) Agaria Marble stone - 18 mm thick |
| 1097 | Table rubbed polished stone 18 mm thick (75x50cm) Granite stone - 18mm thick |
| 1098 | Vertical load testing (INITIAL) of pipes in accordance with IS : 2911 (Part - IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification and up to 50 MT capacity pile |
| 1099 | Vertical load testing (INITIAL) of piles in accordance with IS : 2911(Part -IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. compete as per specification & above 50MT and up to 100 MT |
| 1100 | Vertical load testing (INIGIAL) pf piles in accordance with IS : 2911 (PART-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per specification & group of two ro more up to 50 MT |
| 1101 | Cyclic vertical load testing of piles in accordance with IS : 2911 (Part-IV) including prepartion of pile head etv. for Single pile above 50 tonne capacity pile and up to 100 tonnecapacity pile |
| 1102 | Cyclic vertical load testing of piles in accordance with IS : 2911(Part-IV) including preparation of pile head etc. for Single pile above 50 tonne capacity pile and up to 100 tonnecapacity pile |
| 1103 | Cyclic vertical load testing of piles in accoraance with IS : 2911 ( Part - IV) including preparation of pile head etc. for Group of two piles up to 50 tonne capacity each |
| 1104 | Lateral load testing of single pile in accordance with IS : 2911 part -IV for detemining safe allowable lateral load load on pile. up to 50 tonne capacity |
| 1105 | Lateral load testing of single pile in accordance with IS : 2911 part - IV for detemining safe allowable lateral load on pile. Above 50 tonne capacity |
| 1106 | Hardening compound |
| 1107 | Road Marking paint (spirit based) |
| 1108 | Superior quality road marking paint (water based) |
| 1109 | C.P.Brass bibcock 15 mm |
| 1110 | C.P. Brass long nose bibcock 15 mm |
| 1111 | C.P. Brass long body bibcock 15 mm |
| 1112 | C.P. Brass stop cock (concealed) 15 mm |
| 1113 | C.P. Brass angle valve 15 mm |
| 1114 | Pressed clay tiles 20 mm thick 250 x 250 mm size |
| 1115 | Plain ceiling tiles (BWP type phenol formaldehyde synthetic resin bonded) 600x600x12 mm) |
| 1116 | Semi perforated ceiling tiles (600x600x12 mm) |
| 1117 | 25 mm thick particle board |
| 1118 | 30 mm thick prelaminated flush door shutter |
| 1119 | IInd class teak wood lipping 25 mm wide x 12 mm thick |
| 1120 | 25 mm thick melamine faced prelaminated three layer particle board |
| 1121 | Resin Bonded Rockwool 48kg/m3 |
| 1122 | Glass wool 50 mm thick |
| 1123 | Waste plastic additive |
| 1124 | Chemical ASTMC -type II |
| 1125 | Granite of any colour, 18 mm thick (slab area upto 0.50 sqm) |
| 1126 | Granite of any colour,30 mm thick (slab area up to 0.50 sqm) |
| 1127 | Granite of any colour, 18 mm thick (slab area above 0.50 sqm) |
| 1128 | Aluminium T or L Sections |
| 1129 | For flush door shutters Extra for providing teak veneering on one side instead of commercial veneering |
| 1130 | Paving Asphalt of grade VG-30 of approved quality |
| 1131 | Expandable fastener with plastic sleeve and M.S.screws, 25 mm long |
| 1132 | Expandable fastener with plastic sleeve and M.S.screws, 32 mm long |
| 1133 | Expandable fastener with plastic sleeve and M.S. screws, 40 mm long |
| 1134 | Expandable fastener with plastic sleeve and M.S. screws, 50 mm long |
| 1135 | Plasticizer / super plasticizer |
| 1136 | wall form panel 1250x500 mm |
| 1137 | Tie bolt 12 mm dia 100 mm length |
| 1138 | Tie bolt 12 mm dia 150 mm length |
| 1139 | Tie bolt 20 mm dia 150 mm length |
| 1140 | Tile bolt 20 mm dia 225 mm length |
| 1141 | Spring coil 12 mm |
| 1142 | Plastic cone 12 mm dia |
| 1143 | Corner angle 45x45x5 mm 1.50 m long |
| 1144 | 100 mm channel shoulder 2.5 m long |
| 1145 | Double clip (bridge clip) |
| 1146 | Single clip |
| 1147 | M.S. Tube 40 mm dia |
| 1148 | Wall form panel 1250x450xmm |
| 1149 | Corner angle 45x45x5 mm 2.50 long |
| 1150 | Column clamp 450x1070 mm |
| 1151 | Prop 2 m (2-3.5m) |
| 1152 | Binding wire |
| 1153 | Gun metal cramp |
| 1154 | Stainless steel cramp |
| 1155 | Stainless steel pin |
| 1156 | Adjustable span ESO+SI (2.35-3.40) |
| 1157 | Adjustable telescopic prop 3 m (2.02-3.75m) |
| 1158 | Beam clamp 300-380 mm (450-1070 mm) |
| 1159 | Prop 4 m |
| 1160 | Double coupler |
| 1161 | Cadmium plated full threaded steel screws (30x4 mm dia.) |
| 1162 | Aluminium washer 2 mm thick 15 mm dia |
| 1163 | 12 mm M.S. 'U' beading |
| 1164 | Plastic encapsulated M.S. foor rest 30x20x15 cm |
| 1165 | Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) |
| 1166 | P.V.C. automatic flushing cistern 5 lts capacity |
| 1167 | P.V.C. Automatic flushing cistern 10 lts capacity |
| 1168 | 15 mm C.P. brass tap with elbow operation lever |
| 1169 | White glazed fire clay draining board 600x450x25 mm |
| 1170 | Glass reinforced Gypsum (GRG) board 12.5 mm thick |
| 1171 | Galvanised M.S. sheet 0.5 mm thick pressed channel section of size 50x32 mm |
| 1172 | Galvanised M.S. sheet 0.50 mm thick pressed stud. 48x34x36 mm |
| 1173 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Single lipped urinal |
| 1174 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of two lipped urinals |
| 1175 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of three lipped urinals |
| 1176 | G.I. flush pipe and C.P. brass spreader including C.P. connecting pipe Range of four lipped urinals |
| 1177 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556 |
| 1178 | Precast R.C.C. grating with frame 500x450 mm horizontal grating |
| 1179 | Precast R.C.C. grating with frame 450x100 mm vertical grating |
| 1180 | Bitumen emulsion rapid setting (R.S.) confirming to IS: 8887 |
| 1181 | 12 mm dia 50 mm long wedge type expanded zinc alloy dash fastener |
| 1182 | 3 mm thick translucent white acrylic plastic sheet |
| 1183 | 12 mm thick particle board ceiling tile |
| 1184 | Spigot for standard jointing |
| 1185 | Dash hold fastener 12.5 mm dia, 50 mm long with 6 mm dia bolt |
| 1186 | Anodising 15 microns on aluminium sections |
| 1187 | Neoprene / EPDM rubber gasket |
| 1188 | Anodising 25 microns on aluminium sections |
| 1189 | Powder coating 50 microns on aluminium sections |
| 1190 | Polyester powder coating 50 microns on aluminium sections |
| 1191 | Double action hydraulic floor spring with stainless steel cover plate |
| 1192 | 6 mm dia. G.I adjustable hangers including clips (up to 1.2 m length) |
| 1193 | Double action hydraulic floor spring with brass cover plate |
| 1194 | Base Jack |
| 1195 | Challies |
| 1196 | Cup locks |
| 1197 | 15 mm PTMT bib cock |
| 1198 | 15 mm PTMT bib cock with flange (fancy) |
| 1199 | 15 mm PTMT bib cock long body with flange |
| 1200 | 15 mm PTMT bib stop cock (male thread) |
| 1201 | 20 mm dia. PTMT bib stop cock |
| 1202 | PTMT pillar cock |
| 1203 | PTMT push cock 15 mm dia |
| 1204 | PTMT push cock 12 mm dia 20 mm BSP |
| 1205 | PTMT grating 100 mm dia |
| 1206 | PTMT Pillar cock (fancy) 15 mm foam flow |
| 1207 | 125 mm grating with waste hole |
| 1208 | Rectangular type with openable circular lid 150 mm size 18 mm high with 100 mm dia (110 gm) |
| 1209 | Double acting air valve 50 mm |
| 1210 | Double acting air valve 80 mm |
| 1211 | Double acting air valve 100 mm |
| 1212 | Water meter (including testing charges) 80 mm |
| 1213 | Water meter (including testing charges) 150 mm |
| 1214 | Water meter (including testing charges) 150 mm |
| 1215 | Water meter (including testing charges) 200 mm |
| 1216 | Dirt box strainer 80 mm |
| 1217 | Dirt box strainer 100 mm |
| 1218 | Dirt box strainer 150 mm |
| 1219 | Dirt box strainer 200 mm |
| 1220 | Cat's eye |
| 1221 | Water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) |
| 1222 | Water stops Dumb bell with central bulb |
| 1223 | Kickers |
| 1224 | Wedge expansion hold fastener 1/4 or 6 mm |
| 1225 | Wedge expansion hold fastener 3/8 or 10 mm |
| 1226 | Wedge expansion hold fastener 1/2 |
| 1227 | 8 mm thick (mirror polished tiles machine cut edge) Raj Nagar white |
| 1228 | Wheel 75 mm dia. 40 mm wide |
| 1229 | Aluminium single cleat of size 30x32x3 mm |
| 1230 | Aluminium grip strip of 50x12x2 mm |
| 1231 | 25 mm thick prelaminated flush door shutter both side decorative |
| 1232 | Aluminium U beading |
| 1233 | Glass sheet (pin headed ) 4 mm thick |
| 1234 | Raj nagar plain white marble (table rubbed add polished ) 18 mm thick (slab area upto 0.50 sqm) |
| 1235 | Raj nagar plain white marble (table rubbed and polished ) 18 mm thick (slab area more than 0.50 sqm) |
| 1236 | Second class deodar teak wood lipping 30 mm wide x 12 mm thick |
| 1237 | Veneered particle board with commercial veneering on both sides 12 mm thick |
| 1238 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 12 mm thick |
| 1239 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 18 mm thick |
| 1240 | Prelaminated particle board with one side decorative and other side balancing lamination, flat pressed 3 layer & graded (medium density) Grade I, Type II conforming to IS:12823 (exterior grade) 25 mm thick |
| 1241 | Prelaminated particle board with both side decorative lamination, flat pressed 3 layer & grade ( medium density ) Grade I, Type II conforming to IS: 12823 (exterior grade) 12 mm thick |
| 1242 | Oxidised M.S. hinges finished with nickel plating 50 mm (Pver all width) |
| 1243 | Oxidised M.S. hinges finished with nickel plating 65 mm (Over all width) |
| 1244 | PTMT - Waste Coupling 31/32 mm |
| 1245 | PTMT - Waste Coupling 38/40 mm |
| 1246 | PTMT - Bottle Trap 31/32 mm |
| 1247 | PTMT - Bottle Trap 38/40 mm |
| 1248 | PTMT - Ball Cock 15 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 1249 | PTMT - Ball Cock 120 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 1250 | PTMT - Ball Cock 25 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 1251 | PTMT - Ball Cock 40 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 1252 | PTMT - Ball Cock 50 mm Complete with Epoxy Coated Aluminium Rod & H.D. Ball |
| 1253 | PTMT - Angle Stope cock with Flange 15 mm |
| 1254 | PTMT - Swiveling shower 15 mm |
| 1255 | PTMT - Liquid Soap Container of 400 ml capacity |
| 1256 | PTMT - Towel Ring 215x200x37 mm |
| 1257 | PTMT - Towel Rail (450 mm) |
| 1258 | PTMT - Towel Rail (600 mm) |
| 1259 | PTMT - Shelf 450x124x36 mm |
| 1260 | PTMT - Urinal Spreader 15 mm |
| 1261 | PTMT - Soap Dish/Holder 138x102x75 mm |
| 1262 | PTMT - handle 125x34x24 mm |
| 1263 | PTMT - handle150x34x24 mm |
| 1264 | PTMT - butt hinges 75x60x10 mm |
| 1265 | PTMT - butt hinges 100x75x10 mm |
| 1266 | PTMT - Tower bolt 152x42x18 mm |
| 1267 | PTMT - Tower bolt 202x42x18 mm |
| 1268 | PTMT - door catcher 72x42 mm |
| 1269 | Coir veneered board 4 mm thick |
| 1270 | Coir veneered board 6 mm thick |
| 1271 | Coir veneered board 12 mm thick |
| 1272 | Coir veneered board 18 mm thick |
| 1273 | Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 100 mm dia (3000 mm length pipe) |
| 1274 | Hubless centrifugally cast (spun) iron pipes as per IS 15905 - 75 mm dia (3000 mm length pipe) |
| 1275 | Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 100 mm dia |
| 1276 | Hubless centrifugally cast (spun) iron plain bend as per IS 15905 - 75 mm dia |
| 1277 | Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 100x100x100x100 mm dia |
| 1278 | Hubless centrifugally cast (spun) iron double equal plain junction as per IS 15905 - 75x75x75x75 mm dia |
| 1279 | Hubless centrifugally cast (Spun) iron single equal plain junction as per IS 15905 - 100x100x100 mm dia |
| 1280 | Hubless centrifugally cast (Spun) iron single equal plain junction as per IS 15905 - 75x75x75 mm dia |
| 1281 | Hubless centrifugally cast (spun) iron double unequal plain junction as per IS 15905 - 100x100x75x75 mm dia |
| 1282 | Hubless centrifugally cast (Spun) iron single unequal plain junction as per IS 15905 - 100x100x75 mm dia |
| 1283 | Hubless centrifugally cast (spun) irong double equal plain invert branch as per IS 15905 - 100x100x100x100 mm dia |
| 1284 | Hubless centrifugally cast (spun) iron single equal plain invert branch as per 15905 - 100x100x100 mm dia |
| 1285 | Hubless centrifugally cast (spun) iron single equal plain invert branch as per IS 15905 - 75x75x75 mm dia |
| 1286 | Hubless centrifugally cast (Spun) iron single unequal plain invert branch 45 degree as per IS 15905 - 100x100x75 mm dia |
| 1287 | Hubless centrifugally cast (spun) iron 65 mm offset with 100 mm dia pipe as per IS 15905 |
| 1288 | Hubless centrifugally cast (Spun) iron 65 mm offset with 75 mm dia pipe as per IS 15905 |
| 1289 | Hubless centrifugally cast (Spun) iron 130 mm offset with 100 mm dia pipe per IS 15905 |
| 1290 | Hubless centrifugally cast (Spun) iron 130 mm offset with 75 mm dia pipe per IS 15905 |
| 1291 | Hubless centrifugally cast (Spun) iron bend with acess door - 100 mm dia as per 15905 |
| 1292 | Hubless centrifugally cast (spun) iron bend with access door - 75mm dia as per IS 15905 |
| 1293 | Hubless centrifugally cast (spun) iron terminal guard (slotted cowl) - 100 mm dia as per IS 15905 |
| 1294 | Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 100 mm outlet as per IS 15905 |
| 1295 | Hubless centrifugally cast (spun) iron trap with 100 mm inlet and 75 mm outlet as per IS 15905 |
| 1296 | SS 304 grade shielded coupling with EPDM rubber gasket for 100 mm dia Hubless centrifugally cast (spun) iron |
| 1297 | SS 304 grade shielded coupling with EPDM rubber gasket for 75 mm dia Hubless centrifugally cast (spun) iron |
| 1298 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 100 mm dia |
| 1299 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 150 mm dia |
| 1300 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 mm dia |
| 1301 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 250 mm dia |
| 1302 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 300 mm dia |
| 1303 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 350 mm dia |
| 1304 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 400 mm dia |
| 1305 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329- 450 mm dia |
| 1306 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 500 mm dia |
| 1307 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 600 mm dia |
| 1308 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 700 mm dia |
| 1309 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 750 mm dia |
| 1310 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 800 mm dia |
| 1311 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 - 900 mm dia |
| 1312 | Ductile Iron class K - 9 pipe Conforming to I.S. 8329 -1000 mm dia |
| 1313 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 100 mm dia |
| 1314 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 150 mm dia |
| 1315 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 200 mm dia |
| 1316 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 250 mm dia |
| 1317 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 300 mm dia |
| 1318 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 350 mm dia |
| 1319 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 400 mm dia |
| 1320 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 450 mm dia |
| 1321 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 500 mm dia |
| 1322 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 600 mm dia |
| 1323 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 700 mm dia |
| 1324 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 750 mm dia |
| 1325 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 800 mm dia |
| 1326 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 900 mm dia |
| 1327 | Rubber Gaskets conforming to I.S. 5382 of S.B.R quality 1000 mm dia |
| 1328 | Ductile Iron K-12 specials suitable for push on jointing upto 600 mm dia |
| 1329 | Ductile Iron K-12 specials suitable for push on jointing over 600 mm dia |
| 1330 | Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 utp 600 mm dia |
| 1331 | Ductile Iron specials suitable for mechanical jointing as per I.S. 9523 upto 600 mm dia |
| 1332 | Ductile Iron Pipe Class K-9 flanges and welding 100 mm dia |
| 1333 | Ductile Iron Pipe Class K-9 flanges and welding 150 mm dia |
| 1334 | Ductile Iron Pipe Class K-9 flanges and welding 200 mm dia |
| 1335 | Ductile Iron Pipe Class K-9 flanges and welding 250 mm dia |
| 1336 | Ductile Iron Pipe Class K-9 flanges and welding 300 mm dia |
| 1337 | Ductile Iron Pipe Class K-9 flanges and welding 350 mm dia |
| 1338 | Ductile Iron Pipe Class K-9 flanges and welding 400 mm dia |
| 1339 | Ductile Iron Pipe Class K-9 flanges and welding 450 mm dia |
| 1340 | Ductile Iron Pipe Class K-9 flanges and welding 500 mm dia |
| 1341 | Ductile Iron Pipe Class K-9 flanges and welding 600 mm dia |
| 1342 | Ductile Iron Pipe Class K-9 flanges and welding 700 mm dia |
| 1343 | S&S Centrifugally (Spun) C.I. Pipe class LA 100 mm dia |
| 1344 | S&S Centrifugally (Spun) C.I. Pipe class LA 125 mm dia |
| 1345 | S&S Centrifugally (Spun) C.I. Pipe class LA 150 mm dia |
| 1346 | S&S Centrifugally (Spun) C.I. Pipe class LA 200 mm dia |
| 1347 | S&S Centrifugally (Spun) C.I. Pipe class LA 250 mm dia |
| 1348 | S&S Centrifugally (Spun) C.I. Pipe class LA 300 mm dia |
| 1349 | S&S Centrifugally (Spun) C.I. Pipe class LA 350 mm dia |
| 1350 | S&S Centrifugally (Spun) C.I. Pipe class LA 400 mm dia |
| 1351 | S&S Centrifugally (Spun) C.I. Pipe class LA 450 mm dia |
| 1352 | S&S Centrifugally (Spun) C.I. Pipe class LA 500 mm dia |
| 1353 | S&S Centrifugally (Spun) C.I. Pipe class LA 600 mm dia |
| 1354 | S&S Centrifugally (Spun) C.I. Pipe specials as per IS 1538 suitable for lead jointing up to 300 mm dia |
| 1355 | S&S Centrifugally (Spun) C.I. Pipe specials as per IS 1538 suitable for lead jointing over 300 mm dia |
| 1356 | S&S Centrifugally (Spun) C.I. Pipe specials suitable for mechanical joint as per I.S. 13382 up to 300 mm dia |
| 1357 | S & S Centrifugally (SPUN) C.I. Pipe Specials suitable for mechanical joint as per IS 13382 over 300 mm dia |
| 1358 | Screwed double flanged centrifugally cast (spun) C.I Pipe pf Class B confroming to I.S. 1536.- 100 mm dia |
| 1359 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 150 mm dia |
| 1360 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536 - 200 mm dia |
| 1361 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 250 mm dia |
| 1362 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 300 mm dia |
| 1363 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 350 mm dia |
| 1364 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 400 mm dia |
| 1365 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 450 mm dia |
| 1366 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 500 mm dia |
| 1367 | Screwed double flanged centrifugally cast (spun) C.I. Pipe of Class B conforming to I.S. 1536, - 600 mm dia |
| 1368 | Ductile Iron Class K- 7 pipe conforming to I.S.8329 - 100 mm dia |
| 1369 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 150 mm dia |
| 1370 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 200 mm dia |
| 1371 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 250 mm dia |
| 1372 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 300 mm dia |
| 1373 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 350 mm dia |
| 1374 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 400 mm dia |
| 1375 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 450 mm dia |
| 1376 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 500 mm dia |
| 1377 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 600 mm dia |
| 1378 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 700 mm dia |
| 1379 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 800 mm dia |
| 1380 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 900 mm dia |
| 1381 | Ductile Iron Class K - 7 pipe conforming to I.S. 8329 - 1000 mm dia |
| 1382 | Extruded burnt flyash clay sewer bricks conforming to I.S. 4885 |
| 1383 | Fly ash lime bricks (FALG Bricks) conforming to I.S. 12894 |
| 1384 | Calcium Silicate Bricks machine moulded confirming to I.S. 4139 |
| 1385 | Modified Bitumen Refinery produced CRMB - 55 |
| 1386 | Modified Bitumen Refinery produced CRMB - 60 |
| 1387 | Bitumen emulision medium setting (M.S.) conforming to IS: 8887 |
| 1388 | M.S. Pipe 150 mm dia casing pipe |
| 1389 | M.S. pipe 200 mm dia casing pipe |
| 1390 | PVC blind pipe 150 mm dia as per IS: 12818 |
| 1391 | PVC blind pipe 200 mm dia as pe IS: 12818 |
| 1392 | M.S. cap 150 mm dia |
| 1393 | M.S. cap 200 mm dia |
| 1394 | M.S. bail plug 150 mm dia |
| 1395 | M.S. bail plug 200 mm dia |
| 1396 | PVC slotted pipe 150 mm dia as per IS: 12818 |
| 1397 | PVC slotted pipe 200 mm dia as per IS: 12818 |
| 1398 | Boulder 50 mm to 200 mm |
| 1399 | Gravel 5 mm to 10 mm |
| 1400 | Gravel 1.5 mm to 2 mm |
| 1401 | Gravel 3 mm to 6 mm |
| 1402 | M.S. pipe 100 mm dia casing pipe |
| 1403 | uPVC blind pipe 100 mm dia as per IS: 12818 |
| 1404 | uPVC slotted pipe 100 mm dia as per IS: 12818 |
| 1405 | M.S. cap 100 mm dia |
| 1406 | M.S. bail plug 100 mm dia |
| 1407 | Precast R.C.C. perforated slab |
| 1408 | Water supply tanker of 5000 litre capacity |
| 1409 | M.S. socket 100 mm dia |
| 1410 | M.S. socket 150 mm dia |
| 1411 | M.S. socket 200 mm dia |
| 1412 | Stone cleaning chemical approved by ASI |
| 1413 | Water epellent chemical approved by ASI |
| 1414 | Stone surface strengthening chemical approved by ASI |
| 1415 | Turpentine oil |
| 1416 | Liquid Amonia 5% |
| 1417 | Pea Gravel |
| 1418 | Coloured inter locking C.C. paver Block |
| 1419 | Stone size 10x10x7.50cm |
| 1420 | Sodium pentachlorophenate |
| 1421 | Ceramic Glazed Tiles Ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black |
| 1422 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades and designs of White, Ivory, grey, Fume Red brown etc. |
| 1423 | Ceramic Glazed Tiles Ist quality 300 x 300 mm in all shades designs except White, Ivory, Fume Red Brown etc. |
| 1424 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs White, Ivory, Grey, Fume Red Brown etc |
| 1425 | Rectified - Ceramic Glazed Tiles Ist quality 300 x 300 mm or more in all shades designs except White, Ivory, Grey, Fume Red Brown etc |
| 1426 | Salem Stainless steel AISI - 304 (18/8) Orrisa pattern W.C. pan 724 mm x 578 mm |
| 1427 | Salem Stainless steel AISI - 304 (18/8) Round basin 405 mm X 355 mm |
| 1428 | Salem Stainless steel AISI - 304 (18/8) Wash basin 530 mm X 345 mm |
| 1429 | Centrifugally cast (spun) iron S&S 100 mm inlet and 100 mm outlet |
| 1430 | Centrifugally cast (spun) iron S & S 100 mm inlet and 75 mm outlet |
| 1431 | Agaria White marble slab plain 18 mm thick |
| 1432 | P.T.M.T. Grating square Slit 150 mm |
| 1433 | P.T.M.T. Urinal cock 15 mm dia |
| 1434 | P.T.M.T. Bib cock with nozzle 15 mm |
| 1435 | P.T.M.T. Stop cock (concealed ) 15 mm |
| 1436 | 15 mm nominal bore and 30 cm length PVC connection pipe with P.T.M.T. Nuts |
| 1437 | 15 mm nominal bore and 45 cm length PVC connection pipe with P.T.M.T. Nuts |
| 1438 | P.T.M.T. extension nipple 15 mm |
| 1439 | P.T.M.T. extension nipple 20 mm |
| 1440 | P.T.M.T. extension nipple 25 mm |
| 1441 | Tactile tile |
| 1442 | Matt finished vitrified tile 100x100 x16 mm |
| 1443 | Vitrified tile |
| 1444 | Modular common burnt clay bricks of class designation 7.5 |
| 1445 | Machine moulded perforated common burnt clay FPS (non modular) bricks of class designation 12.5 |
| 1446 | Machine moulded common burnt clay modular perforated bricks of class designation 12.5 |
| 1447 | Machine moulded common burnt clay FPS (non modular) bricks of class designation 12.5 |
| 1448 | Machine moulded common burnt clay tile bricks of class designation 12.5 |
| 1449 | Chemical Rust Remover |
| 1450 | Hire charges of Drill machine upto 30 mm dia |
| 1451 | Epoxy |
| 1452 | SBR Polymer |
| 1453 | Woven PVC Cloth |
| 1454 | Hire charges of sand blasting equipment |
| 1455 | Hire charges of compressure |
| 1456 | 25 mm thick cement concrete shotcrete(guniting) with compressor |
| 1457 | 50 mm thick cement concrete shotcrete (guniting) with compressor |
| 1458 | 75 mm thick cement concrete shotcrete (guniting) with compressor |
| 1459 | Adhesive chemical |
| 1460 | Bit of drilling machine for Hole upto 30 mm dia |
| 1461 | GI injection nipple 12mm dia, 75mm long |
| 1462 | Blowing compressed air for cleaning holes upto 30mm dia |
| 1463 | L shaped 100mm long, 10mm dia mild steel shear key |
| 1464 | Welding charges of shear key to existing reinforcement |
| 1465 | Acrylic Polymer chemical for cracks |
| 1466 | Hire charges of Plant and machinery, it can inject - 350 Kg/day |
| 1467 | 24 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 1468 | 30 mm thick Factory made shutters with styles, rails and panels of PVC extruded sections in white, grey or wooden finish |
| 1469 | Factory made PVC rigid foam panelled shutter i/c carriage |
| 1470 | Factory made PVC rigid foam panelled shutter as per IS: 4020 i/c carriage |
| 1471 | Factory made PVC rigid foam sheet 1 mm thick |
| 1472 | Factory made PVC rigid foam sheet 5 mm thick |
| 1473 | Factory made prelaminated PVC rigid foam sheet 5 mm thick |
| 1474 | 48 mm X40 mmX1.5 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 1475 | Factory made door frame PVC extruded sheet i/c carriage |
| 1476 | Adhesive solvent cement |
| 1477 | Factory made EPS Core wallpanel/ roof panel sandwiched between two Engineered welded wire fabric mesh of 3 mm dia G.I. wire mesh, with 50 mm pitch in both the directions, kept at 120-135 mm gap and interconnected by the zig zag G.I. wire of 3 mm dia at alternate row by welding |
| 1478 | Factory made door frame size 50x47 mm with wall thickness 5 mm made of single piece extruded profile |
| 1479 | Expanded poly ethylene Foam sheet 4 mm thick of Density 40Kg/m3 |
| 1480 | High Density expanded poly ethylene (EPE) foam 1mm thick |
| 1481 | Fire rated door frame made with 1.6 mm thick G.I sheet (120 minutes fire rating) |
| 1482 | Fire rated door shutter made with 1.6 mm thick G.I sheet (120 minutes fire rating) including hinges (without glass panels) |
| 1483 | Bamboo wood Tile flooring 14mm thick of minimum size 1800mm X 130 mm |
| 1484 | Bamboo wood Quarter round 18 mm thick of size 1900mm x 18 mm |
| 1485 | Bamboo wood door reducer 14 mm thick of size 1900 mm x 44mm |
| 1486 | Bamboo wood skirting 14mm thick of size 1900mm x 85 mm |
| 1487 | Bamboo wood tile wall cladding 10mm thick of size 1900mm x 135mm |
| 1488 | Bamboo wood T-mold 14mm thick of size 1900mm x 44mm |
| 1489 | Bamboo wood Threshold 14mm thick of size 1900mm x 44mm |
| 1490 | Bamboo wood shutter of doors |
| 1491 | Bamboo wood panelling (10mm thick) |
| 1492 | Superior class Bamboo wood door frame 65 mm thick |
| 1493 | Aluminium sheets Grade 5052, 4 mm thick for wall panel/deck panel/ WRB panel/ Kicker panels/ door closing panels (for form work) |
| 1494 | Aluminium sheed Grad 5052, 4 mm thick for Internal corner/ Columns corners / (for Form work) |
| 1495 | Aluminium sheets Grade 5052, 4 mm thick for Mid Soldier/ End soldier (For form work) |
| 1496 | External corner 2050 mm |
| 1497 | External corner 825 mm |
| 1498 | Soldier tie 370 mm |
| 1499 | Adjustable prop-2.0x2.0 m |
| 1500 | Pin -50 |
| 1501 | Pin - 127 |
| 1502 | Wedge |
| 1503 | Wall tie -150 (355 mm |
| 1504 | Polythene Sleeve 90x150 mm |
| 1505 | Polythene Rool - 150 mm long |
| 1506 | Vertical soldier - 1100 mm |
| 1507 | Wall attchyed bracket 600x100 mm |
| 1508 | Allignment Pipe - 3.00 Mtr. |
| 1509 | Allignment Bracket |
| 1510 | Tie rod fr bracket - 500 mm |
| 1511 | Anchor wing nut 100 mm |
| 1512 | Debit Pin - 250 mm |
| 1513 | PVC pipe - 20 mm -150 mm long |
| 1514 | PVC cone |
| 1515 | Bold+Nut - 16 x 80 mm |
| 1516 | Flat washer 16, 3 mm thick |
| 1517 | Bolt +Nut - 16 x30 mm |
| 1518 | Door spacer 45x45x5 -1135mm long |
| 1519 | Door spacer 45x45x5x-985 mm long |
| 1520 | Powder coated M.S. butt hinges 100 mm X58 mm X 1.9 mm |
| 1521 | SS ball bearing of sizw 100x89x3 mm |
| 1522 | Zinc alloy (white powder coated ) 3D hinges for uPVC door |
| 1523 | Zinc alloy (white powder coated ) handles with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key for uPVC casement door |
| 1524 | Zinc alloy (white powder coated) handles along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC sliding window |
| 1525 | Zinc alloy (white powder coated) handles with key along with zinc plated mild steel multi point locking having transmission gear with keeps for uPVC sliding door |
| 1526 | uPVC extruded (Small series) casement window frame size 47x50mm |
| 1527 | uPVC extruded (small series) casement window sash/window mullion size 47x68mm |
| 1528 | uPVC extruded glazing bead of appropriate dimension for small series casement window sash |
| 1529 | u PVC extruded (Big series) casement window frame size 67x60mm |
| 1530 | u PVC extruded (Big series) casement door frame size 67x60mm |
| 1531 | uPVC extruded (big series) casement window sash/window mullion/ door mullion size 67x80 mm |
| 1532 | uPVC extruded (big series) casement door sash size 67x11 mm |
| 1533 | uPVC extruded glazing bead of appropriate dimension for big series casemtne window/door sash |
| 1534 | uPVC extruded glazing bead of appropriate dimension for small series sliding window sash |
| 1535 | uPVC extruded glazing bead of appropriate dimension for big series of sliding window/ door sash |
| 1536 | uPVC extruded (small series) 2 track sliding window frame size 52x44mm |
| 1537 | uPVC extruded (big series) 2 track sliding window /door frame size 67x50 mm |
| 1538 | uPVC extruded (Small series) 3 track sliding window frame size 92x44 mm |
| 1539 | uPVC extruded (big series) 3 track sliding window/door frame size 116x45 mm |
| 1540 | uPVc extruded (small series) 2 track sliding window sash/ 3 track sliding window sash size 32x60 mm |
| 1541 | uPVC extruded (Big series) 2 track sliding window sash size 46x62 mm |
| 1542 | uPVC extruded (big series) 3 track sliding window sash size 46x62 mm |
| 1543 | uPVC extruded interlock of appropriate dimension for small series sliding window sash |
| 1544 | uPVC extruded interlock of appropriate dimension for small series sliding window/ door sash |
| 1545 | uPVC extruded inline adaptor or appropriate dimension for big series sliding window/door sash |
| 1546 | uPVC extruded 2 track sliding door sash/ 3 track sliding door sash (Big series) size 46x82 mm |
| 1547 | A.P.P. modified polymeric felt (two layers) 1.5 mm thick |
| 1548 | A.P.P. modified polymeric felt (two layers) 2 mm thick |
| 1549 | A.P.P. modified 2 mm thick membrane reinforced with glass fibre matt |
| 1550 | A.P.P. modified 3 mm thick membrane reinforced with glass fibre matt |
| 1551 | A.P. Modified 3 mm thick membrane reinforced with polyester matt |
| 1552 | Bitumen primer for bitumen membrane |
| 1553 | Geotextile 120 gram per sqm membrane |
| 1554 | Stainless steel screws 50 mm |
| 1555 | Stainless steel screws 40 mm |
| 1556 | Stainless steel screws 30 mm |
| 1557 | Stainless steel screws 20 mm |
| 1558 | Stainless steel butt hinges 125x64x1.9 mm IS: 12817 marked |
| 1559 | Stainless steel butt hinges 100x58x1.9 mm IS : 12817 marked |
| 1560 | Stainless steel butt hinges 75x47x1.8 mm IS : 12817 marked |
| 1561 | Stainless steel butt hinges 50x37x1.5 mm IS : 12817 marked |
| 1562 | Stainless steel butt hinges (heavy weight) 125x64x2.5 mm IS: 12817 marked |
| 1563 | Stainless steel butt hinges (heavy weight) 100x60x2.5 mm IS : 12817 marked |
| 1564 | Stainless steel butt hinges (heavy weight) 75x50x2.5 mm IS : 12817 marked |
| 1565 | M.S. heavy weight butt hinges 125x90x4.0 mm IS : 1341 marked |
| 1566 | M.S. heavy weight butt hinges 100x75x3.5 mm IS: 1341 marked |
| 1567 | M.S. heavy weight butt hinges 75x60x3.1 mm IS : 1341 marked |
| 1568 | M.S. heavy weight butt hinges 50x40xx2.5 mm IS : 1341 marked |
| 1569 | Concealed zinc coated hinges 19-20 mm thick with mounting plate |
| 1570 | 1216 mm PE-AL-PE Composite pressure pipe |
| 1571 | 1620 mm PE-AL-PE Composite pressure pipe |
| 1572 | 2025 mm PE-AL-PE Composite pressure pipe |
| 1573 | 2532 mm PE-AL-PE Composite pressure pipe |
| 1574 | 3240 mm PE-AL-PE Composite pressure pipe |
| 1575 | 4050 mm PE-AL-PE Composite pressure pipe |
| 1576 | Water for jetting/ blowback |
| 1577 | Polymer modified cementation coating |
| 1578 | Fibre glass cloth |
| 1579 | Multi surface paint |
| 1580 | Acrylic exterior paint |
| 1581 | Premium Arcylic exterior paint l |
| 1582 | Textured exterior paint |
| 1583 | Primer for cement paint |
| 1584 | Special primer (C.W) |
| 1585 | Metal Primer (U.G.) |
| 1586 | Fibre reinforced elastomeric liquid water proofing membrane |
| 1587 | Cementitious water proofing coating with elastic polymers |
| 1588 | Acrylic modified resin based texture |
| 1589 | 40 mm long S S screws with plastic rawl plugs |
| 1590 | Galavanised MS 8 mm outer diameter M-6 dash fastener 50 mm long |
| 1591 | Mineral fibre beveled tegular edged ceiling tiles 595x595 mm, 16 mm thick |
| 1592 | Mineral fibre beveled tegular edged ceiliing tiles 595x595mm, 16 mm thick with bio-block conforming to ISO 5 (class 100) specifications |
| 1593 | Mineral fiber beveled tegular edged ceiling tiles 595x595mm, 20 mm thick |
| 1594 | G.I main runner 15x32 mm of 3000 mm length, 0.33 thick |
| 1595 | G.I cross-T 15x32 mm of 1200 mm length, 0.33 mm thick |
| 1596 | G.I. cross Tee 15X32mm of 600mm length, 0.33 mm thick |
| 1597 | G.I hanger rod 6mm dia fully threaded upto 1000 mm length |
| 1598 | Stainless steel U Channel of size (50x25x2 mm) |
| 1599 | Non staining water resistant clear silicon |
| 1600 | Extruded polystrene rigid insulation board 50mm thick |
| 1601 | 15 mm thick, light weight, integral densified micro look edged, false ceiling tiles of size 595x595 mm |
| 1602 | 15 mm thick, light weight, fully perforated square/butt edge integral densified, false ceiling tile of size 595x595 mm |
| 1603 | Galavanised MS hanger rod 6 mm dia MS fullly threaded up to 1000 mm length |
| 1604 | Powder coated steel section main-T ceiling sections 15x42x0.40 mm (3000 mm long) |
| 1605 | Galavanised mild steel perimeter wall angle 22x19x0.40 mm (3000 mm long) |
| 1606 | Powder coated Galvanised Iron intermediate cross-T section 15x42x0.40 mm (1200 mm long |
| 1607 | Powder coated galvanised iron intermediate cross-T section 15x42x0.40 mm (600 mm long) |
| 1608 | Crates made of MEsh type 10x12 (D=100mm) Zinc coated (Mash wire diameter 3.00 mm) |
| 1609 | Crates made of Mesh type 10x12 (D=100mm)Zn+PVC coated Mesh wire diameter 2.70/2.70 mm (ID/OD) |
| 1610 | Crates made of Mesh type 10x12(D=100mm) Zn+10% Al alloy + PVC coated. Mesh wire diameter 2.70/3.70 mm (ID/OD) |
| 1611 | Cold form light gauge Steel C-section of thickness 0.75 mm i/c zink coating/sliting etc |
| 1612 | Wastage of cold form light guage steel |
| 1613 | 12 mm thick micro tegular edge semi perforated GRG (Glass Fibre Reinforcemtn Gypsum) false ceiling tiles of size 595x595 mm |
| 1614 | 12 mm thick micro tegular edge fully perforated GRG (Glass Fibre Reinforcemtn Gypsum) false ceiling tiles of size 595x595 mm |
| 1615 | 10 mm thick square edge fully perforated GRG (Glass Fibre Reinforcemtn Gypsum) false ceiling tiles of size 595x595 mm |
| 1616 | Galvanized iron intermediate cross-T section 15x32x0.33 mm (600 mm long) |
| 1617 | Galvanised MS hanger road 6 mm dia MS fully threaded upto 1000 mm length |
| 1618 | Calcium Silicate tegular edged celling tiles 595x595 mm and 15 mm thick |
| 1619 | Galvanised Steel main Tee ceiling section Size 24 x 38 x 0.33 mm ( 3 metre long) |
| 1620 | Galvanised Steel perimeter wall Angle Size 24 x 24 0.40 mm (3.00 metre long) |
| 1621 | Galvanised Steel intermediate cross T section Size 24 x 25 x 0.33 mm (1.2 metre long) |
| 1622 | Galvanised Steel intermediate cross T Section 24 x 25 x 0.33 (0.6 metre long) |
| 1623 | Galvanised Steel soffit cleat size 25x35x1.60 mm |
| 1624 | Wooden screws with plastic rawl plugs 35x8 mm |
| 1625 | Galvanised MS 8mm outer diameter M-6 dash fastener 25 mm long |
| 1626 | GI Metal Tile Clip in Plain Beveled edge global white colour tiles of size 600x600 mm and 0.5 mm thick |
| 1627 | GI Metal Tile Clip in Perforated Beveled edge global white colour tiles of size 600x600 mm and 0.5 mm thick |
| 1628 | GI Metal Tile Lay- in Plain Tegular edge global white color tiles of Size 595x595 mm and 0.5 mm thick |
| 1629 | GI Metal Tile Lay-in Perforated Tegular edge global white color tiles of Size 595x595 mm and 0.5 mm thick |
| 1630 | PVC Laminated Gypsum Tiles (square edge) of Size 595x595 mm and 12.5 mm thick |
| 1631 | Gypsum Tiles Fully Perforated Square edge of Size 595x595 mm and 12.5 mm thick |
| 1632 | Spring T-section 24x34x0.45 mm (3.00 meter long) |
| 1633 | C Wall angle section 20x30x20x0.50 mm (3.00 meter long) |
| 1634 | Main C Carrier Size 10x38x10x0.70 mm (3.00 meter long) |
| 1635 | Spring T-connector |
| 1636 | C Carrier Connector |
| 1637 | C Suspension Clip |
| 1638 | Wire Coupling Clip |
| 1639 | Main T ceiling sections 24x38x0.3 mm (3 metre long) |
| 1640 | Perimeter wall angle 24x24x0.3 mm ( 3 metre long) |
| 1641 | Intermediate cross T-Section 24x25x0.3 mm (1.2 mtr long) |
| 1642 | Intermediate cross - T Section 24x25x0.3 mm (0.6 mtr. long) |
| 1643 | Hanger rod 4 mm thick |
| 1644 | Adjustment clip 85x30x0.8 mm |
| 1645 | Soffit cleat (Size 27x37x25x1.60 mm) |
| 1646 | Dash fastener 6 mm dia 50 mm long |
| 1647 | Galvanised MS L-shaped level adjuster of size 85x25x2 mm |
| 1648 | Vitrified floor tile 50x50 cm |
| 1649 | Vitrified floor tile 60x60 cm |
| 1650 | Vitrifies floor tile 80x80 cm |
| 1651 | Vitrified floor tile 100x100 cm |
| 1652 | Border tiles 200x75 mm size |
| 1653 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia |
| 1654 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia |
| 1655 | Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia |
| 1656 | Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia |
| 1657 | Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia |
| 1658 | Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia |
| 1659 | Chlorinated Polyvinyl - chloride (CPVC) pipe 62.5 inner dia |
| 1660 | Chlorinated Polyvinyl - chloride (CPVC) pipe 75 mm inner dia |
| 1661 | Chlorinated Polyvinyl - chloride (CPVC) pipe 100 inner dia |
| 1662 | Chlorinated Polyvinyl - chloride (CPVC) pipe 150 mm inner dia |
| 1663 | Silicon sealant |
| 1664 | Stainless steal screws 30 x 4 mm |
| 1665 | Hermetically sealed double glazed unit made with 6 mm thick clear float glass both side having 12 mm air gap |
| 1666 | Stainless steel (SS 304 grade) adjustable friction window stay 205 x 19 mm |
| 1667 | Stainless steel (S S 304 grade) adjustable friction window stay 255 x 19 mm |
| 1668 | Stainless steel (S S 304 grade) adjustable friction window stay 355 x 19 mm |
| 1669 | Stainless steel (S S 304 grade) adjustable friction window stay 510x 19 mm |
| 1670 | Stainless steel (S S 304 grade) adjustable friction window stay 710x 19 mm |
| 1671 | Masking Tape |
| 1672 | Autoclaved aerated cement (AAC) blocks |
| 1673 | Gypsum pannel 666 X 500 X 100 mm siz |
| 1674 | Bonding plaster for Gypsum panel |
| 1675 | Water proof ply 12 mm thick |
| 1676 | Aluminium casement window fastener (Anodised AC 15 ) |
| 1677 | Aluminium casement window fastener (powder coated ) |
| 1678 | Aluminium casement window fastener ( polyester powder coated) |
| 1679 | Aluminium round shape handle (anodised AC 15) |
| 1680 | Aluminium round shape handle (powder coated) |
| 1681 | Aluminium round shape handle (polyester powder coated) |
| 1682 | Stainless steel screws 25 mm x 4 mm |
| 1683 | UV stabilised 2 mm thick plain FRP sheet |
| 1684 | UV stabilised 2 mm thick corrugated FRP sheet |
| 1685 | Mangalore ridge tiles 20 mm thick |
| 1686 | Mangalore tiles 20 mm thcik |
| 1687 | Precoated glavanished iron profile sheet 0.50 mm TCT |
| 1688 | Precoated galvanised steel plain ridges |
| 1689 | Precoated galvanised steel flashings / aprons |
| 1690 | Precoated galvanised steel gutter |
| 1691 | Precoted galvanised steel north light curves |
| 1692 | Precoated galvanised steel barge board |
| 1693 | Precoated galvanish steel crimp curve |
| 1694 | I mm thick 35 mm wide bright finished stainless steel piano hinges |
| 1695 | Eposy Grout |
| 1696 | Red sand stone gang saw cut 30 mm thick |
| 1697 | White sand stone gang saw cut 30 mm thick |
| 1698 | Delineator |
| 1699 | Precast C.C. Kerb stone M-25 |
| 1700 | Thermoplastic paint |
| 1701 | Glass beads |
| 1702 | Interlocking C.C. paver block (60 mm thick, M-30) |
| 1703 | High intensity retro- reflective sheet |
| 1704 | Punched tape concertina coil 600 m dia . 10 m openable length( Total length 90 m) |
| 1705 | RBT reinforced barbed wire |
| 1706 | Turn buckle and strengthening bolt |
| 1707 | Precast pavement slab 450 x 450 x 50 mm (M- 30) |
| 1708 | Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia 4 mm |
| 1709 | Chain link fabric fencing mesh of size 50x50 mm made of G.I. wire of dia dia 4 mm. PVC coated to outer dia 5 mm |
| 1710 | Chain link fabric fencing mesh of size 25x25 mm made of G.I. wire of dia 3 mm |
| 1711 | Stainless steel cramps (weight 260 grams) with nuts, bolts and washer for dry stone cladding |
| 1712 | 8 mm thick tapered edge ccalcium silicate board |
| 1713 | 10 mm thick calcium silicate board |
| 1714 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 48.60 mm outer dia |
| 1715 | Coupling/Socket fittings for 15.88 mm outer dia SS pipe |
| 1716 | Telescopic drawer channels 300 mm long |
| 1717 | Stainless steel roller for sliding arrangement in racks/cupboards/cabinets shutter |
| 1718 | 50 mmx42 mmx2 mm thick Factory made door frame of PVC extruded sections in white, grey or wooden finish |
| 1719 | 25 mm thick factory made PVC flush door shutter i/c carriage |
| 1720 | Factory made glass reinforced plastic door frame 90x45 mm i/c carriage |
| 1721 | 30 mm thick factory made glass fiber reinforced plastic panel door shutter i/c carriage |
| 1722 | 30 mm thick factory made solid PVC profile panelled door single pipece extruded profile decorative finish (wood grain printed on both side) |
| 1723 | Factory made solid PVC door frame 60 x 32 mm i/c carriage |
| 1724 | 28 mm factory made solid PVC panel door shutter i/c carriage |
| 1725 | 30 mm thick factory made solid PVC profile panelled door single pipece extruded profile non decorative finish |
| 1726 | Fiber glass reinforced plastic chajja |
| 1727 | Magnetic catcher triple strip vertical type |
| 1728 | Magnetic catcher double strip horizontal type |
| 1729 | 100 mm mortice lock with 6 levers for aluminium door |
| 1730 | 12.5 mm thick Glass fibre reinforced Gypsum board |
| 1731 | 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5 mm |
| 1732 | Ceiling sections 0.55 mm thick having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm |
| 1733 | Perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm |
| 1734 | Nylon sleeve & wooden screws ( 40 mm) |
| 1735 | Counter sunk ribbed head screw 25 |
| 1736 | 12 mm thick marine plywood conforning IS: 710 |
| 1737 | 12 mm thick fire retardant plywood conforming to IS: 5509 |
| 1738 | 1.5 mm thick decorative laminated sheet |
| 1739 | 1.0 mm thick decorative laminated sheet |
| 1740 | 30 mm thick factory made glass fiber reinforced pllastic flush door shutte i/c carriage |
| 1741 | High polymer modified quickset tile adhesive |
| 1742 | Synthetic polyster traingular fibre of length 12 mm, effective diameter 10.40 microns and specific gravity of 1.34 to 1.40 |
| 1743 | Synthetic ployster triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 |
| 1744 | P.V.C. Single piece extruded door frame of profile size 50 mm x 47 mm with wall thickness of 5 mm |
| 1745 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile non decorative finished (Matt finished) |
| 1746 | 35 mm thick factory made solid panel PVC door shutter of single piece extruded profile decorative finished (Wood grain finished) |
| 1747 | Stainless Steel wire guage (Grade-304) aperture 1.4 mm and 0.50 mm dia wire |
| 1748 | Facrory made door frame fire rated (60 minutes) made with 16 SWG G.I. Sheet of section 143 mm x 57 mm duly filled with vermuculite based concrete mix |
| 1749 | Fire rated door shuttere made with 16 SWG G.I. sheet (60 minutes) without panel |
| 1750 | Fire seal Putty |
| 1751 | Clear fire resistant glass panes 6 mm thick (60 minutes) |
| 1752 | G.I.U beading 16 SWG G.I. sheet (zinc coating >120gm/m2) with ceramic tape of suitable thickness and fire resistant primer coating |
| 1753 | Matrix Mineral Board |
| 1754 | Panic Bar / latch (Double point) |
| 1755 | 65 mm x 55 mm x 2 mm thick Factory made door frame of PVC extruded section in white grey or wooden finish |
| 1756 | 37 mm thick Factory made shutter with style, rails and panels of PVC extruded section in white or grey finish i/c carriage |
| 1757 | 75 mm x 53 mm x 2.0 mm thick Factory made door frame of PVC extruded section in white, grey or wooden finish |
| 1758 | 37 mm thick Factory made fusion welded shutter with style, rails and panels of PVC extruded section in wooden finish |
| 1759 | Zinc alloy (white powder coated) touch lockwith hook for wire mesh shutter |
| 1760 | Zinc alloy (white powder coated) casement handle for uPVC windows |
| 1761 | Zinc alloy (white powder coated) Touch Lock for uPVC windows for uPVC windows |
| 1762 | Zinc alloy rollers for uPVC windows |
| 1763 | Zinc alloy rollers for uPVC door |
| 1764 | Zinc alloy (white powder coated ) casement lock for uPVC windows |
| 1765 | Stainless steel friction hinge of size 200 mm x 19 x 1.9 mm for uPVC windows |
| 1766 | Stainless steel friction hinge of size 250 mm x 19 x 1.9 mm for uPVC windows |
| 1767 | Stainless steel friction hinge of size 300 mm x 19 x 1.9 mm for uPVC windows |
| 1768 | Stainless steel friction hinge of size 350 mm x 19 x 1.9 mm for uPVC windows |
| 1769 | Stainless steel friction hinge of size 400 mm x 19 x 1.9 mm for uPVC windows |
| 1770 | Aluminium Track on bottom rail for uPVC window |
| 1771 | Wool Pine for uPVC window |
| 1772 | Aluminium Grill |
| 1773 | Steel Galvanised tubular reinforcement for uPVC door/ window |
| 1774 | Stainless Steel dash fastener of 8 mm dia and 75 mm long bolt |
| 1775 | GI Fastener 100x8 mm |
| 1776 | Toughened glass 12 mm thickness |
| 1777 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 15.88 mm outer dia |
| 1778 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 22.22 mm outer dia |
| 1779 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 28.58 mm outer dia |
| 1780 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 34.00 mm outer dia |
| 1781 | SS pipe 304 grades with press fit technology as per JIS 3448 standard 42.70 mm outer dia |
| 1782 | 8 mm thick Calcium silicate perforated tiles of size 595 x595 mm |
| 1783 | Interlocking C.C. paver block (80 mm thick, M-30) |
| 1784 | Coupling/Socket fittings for 22.22 mm outer dia SS pipe |
| 1785 | Coupling/Socket fittings for 28.58 mm outer dia SS pipe |
| 1786 | Coupling/Socket fittings for 34.00 mm outer dia SS pipe |
| 1787 | Coupling/Socket fittings for 42.70 mm outer dia SS pipe |
| 1788 | Coupling/Socket fittings for 48.60 mm outer dia SS pipe |
| 1789 | Reducer for 22.22 mm X 15.88 mm outer Dia SS pipe |
| 1790 | Reducer for 28.58 mm X 15.88 mm outer Dia SS pipe |
| 1791 | Reducer for 28.58 mm X 22.22 mm outer Dia SS pipe |
| 1792 | Reducer for 34.00 mm X 15.88 mm outer Dia SS pipe |
| 1793 | Reducer for 34.00 mm X 22.22 mm outer Dia SS pipe |
| 1794 | Reducer for 34.00 mm X 28.58 mm outer Dia SS pipe |
| 1795 | Reducer for 42.70 mm X 15.88 mm outer Dia SS pipe |
| 1796 | Reducer for 42.70 mm X 22.22 mm outer Dia SS pipe |
| 1797 | Reducer for 42.70 mm X 28.58 mm outer Dia SS pipe |
| 1798 | Reducer for 48.60 mm X 15.88 mm outer Dia SS pipe |
| 1799 | Reducer for 42.70 mm X 34.00 mm outer Dia SS pipe |
| 1800 | Reducer for 48.60 mm X 22.22 mm outer Dia SS pipe |
| 1801 | Reducer for 48.60 mm X 28.58 mm outer Dia SS pipe |
| 1802 | Reducer for 48.60 mm X 34.00 mm outer Dia SS pipe |
| 1803 | Reducer for48.60 mm X 42.70 mm outer Dia SS pipe |
| 1804 | Slip Coupling / Socket 15.88 mm outer dia SS pipe |
| 1805 | Slip Coupling / Socket 22.22 mm outer dia SS pipe |
| 1806 | Slip Coupling / Socket 28.58 mm outer dia SS pipe |
| 1807 | Slip Coupling / Socket 34.00 mm outer dia SS pipe |
| 1808 | Slip Coupling / Socket 42.70 mm outer dia SS pipe |
| 1809 | Slip Coupling / Socket 48.60 mm outer dia SS pipe |
| 1810 | Elbow 90o for 15.88 mm outer dia SS pipe |
| 1811 | Elbow 90o for 22.22 mm outer dia SS pipe |
| 1812 | Elbow 90o for 28.58 mm outer dia SS pipe |
| 1813 | Elbow 90o for 34.00 mm outer dia SS pipe |
| 1814 | Elbow 90o for 42.70 mm outer dia SS pipe |
| 1815 | Elbow 90o for 48.60 mm outer dia SS pipe |
| 1816 | Reducing Elbow 90o for 22.22 mm X 15.88 mm outer dia SS pipe |
| 1817 | Reducing Elbow 90o for 28.58 mm X 15.88 mm outer dia SS pipe |
| 1818 | Reducing Elbow 90o for 28.58 mm X 22.22 mm outer dia SS pipe |
| 1819 | Reducing Elbow 90o for 34.00 mm X 22.22 mm outer dia SS pipe |
| 1820 | Reducing Elbow 90o for 34.00 mm X 28.58 mm outer dia SS pipe |
| 1821 | Reducing Elbow 90o for 42.70 mm X 34.00 mm outer dia SS pipe |
| 1822 | Equal Tee for 15.88 mm outer dia SS pipe |
| 1823 | Equal Tee for 22.22 mm outer dia SS pipe |
| 1824 | Equal Tee for 28.58 mm outer dia SS pipe |
| 1825 | Equal Tee for 34.00 mm outer dia SS pipe |
| 1826 | Equal Tee for 42.70 mm outer dia SS pipe |
| 1827 | Equal Tee for 48.60 mm outer dia SS pipe |
| 1828 | Reducing Tee for 22.22 mm X 15.88 mm outer dia SS pipe |
| 1829 | Reducing Tee for 28.58 mm X 15.88 mm outer dia SS pipe |
| 1830 | Reducing Tee for 28.58 mm X 22.22 mm outer dia SS pipe |
| 1831 | Reducing Tee for 34.00 mm X 15.88 mm outer dia SS pipe |
| 1832 | Reducing Tee for 34.00 mm X 22.22 mm outer dia SS pipe |
| 1833 | Reducing Tee for 34.00 mm X 28.58 mm outer dia SS pipe |
| 1834 | Reducing Tee for 42.70 mm X 15.88 mm outer dia SS pipe |
| 1835 | Reducing Tee for 42.70 mm X 22.22 mm outer dia SS pipe |
| 1836 | Reducing Tee for 42.70 mm X 28.58 mm outer dia SS pipe |
| 1837 | Reducing Tee for 42.70 mm X 34.00 mm outer dia SS pipe |
| 1838 | Reducing Tee for 48.60 mm X 15.88 mm outer dia SS pipe |
| 1839 | Reducing Tee for 48.60 mm X 22.22 mm outer dia SS pipe |
| 1840 | Reducing Tee for 48.60 mm X 28.58 mm outer dia SS pipe |
| 1841 | Reducing Tee for 48.60mm X 34.00 mm outer dia SS pipe |
| 1842 | Reducing Tee for 48.60mm X 42.70mm outer dia SS pipe |
| 1843 | Male thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 1844 | Male thread Tee for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 1845 | Male thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 1846 | Male thread Tee for 28.58 mm outer dia X 15 mm nominal dia threaded |
| 1847 | Stainless steel Male thread Tee for 28.58 mm outer dia X 20 mmnominal dia threaded |
| 1848 | Stainless steel Male thread Tee for 28.58 mm outer dia X 25 mmnominal dia threaded |
| 1849 | Male thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded |
| 1850 | Male thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded |
| 1851 | Male thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded |
| 1852 | Male thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 1853 | Male thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded |
| 1854 | Male thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded |
| 1855 | Male thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded |
| 1856 | Male thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded |
| 1857 | Male thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded |
| 1858 | Male thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded |
| 1859 | Male thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded |
| 1860 | Male thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded |
| 1861 | Male thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded |
| 1862 | Male thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded |
| 1863 | Male thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 1864 | Female thread Tee for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 1865 | Female thread Tee for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 1866 | Female thread Tee for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 1867 | Female thread Tee for 28.58 mm outer dia X 15 mm nominal dia threaded |
| 1868 | Female thread Tee for 28.58 mm outer dia X 20 mm nominal dia threaded |
| 1869 | Female thread Tee for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 1870 | Female thread Tee for 34.00 mm outer dia X 15 mm nominal dia threaded |
| 1871 | Female thread Tee for 34.00 mm outer dia X 20 mm nominal dia threaded |
| 1872 | Female thread Tee for 34.00 mm outer dia X 25 mm nominal dia threaded |
| 1873 | Female thread Tee for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 1874 | Female thread Tee for 42.70 mm outer dia X 15 mm nominal dia threaded |
| 1875 | Female thread Tee for 42.70 mm outer dia X 20 mm nominal dia threaded |
| 1876 | Female thread Tee for 42.70 mm outer dia X 25 mm nominal dia threaded |
| 1877 | Female thread Tee for 42.70 mm outer dia X 32 mm nominal dia threaded |
| 1878 | Female thread Tee for 42.70 mm outer dia X 40 mm nominal dia threaded |
| 1879 | Female thread Tee for 48.60 mm outer dia X 15 mm nominal dia threaded |
| 1880 | Female thread Tee for 48.60 mm outer dia X 20 mm nominal dia threaded |
| 1881 | Female thread Tee for 48.60 mm outer dia X 25 mm nominal dia threaded |
| 1882 | Female thread Tee for 48.60 mm outer dia X 32 mm nominal dia threaded |
| 1883 | Female thread Tee for 48.60 mm outer dia X 40 mm nominal dia threaded |
| 1884 | Female thread Tee for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 1885 | Female threaded Connector/Adapter for 15.88 mm outer dia X 15 mm nominal threaded |
| 1886 | Female threaded Connector/Adapter for 22.22 mm outer dia X 15 mm nominal threaded |
| 1887 | Female threaded Connector/Adapter for 22.22 mm outer dia X 20 mm nominal threaded |
| 1888 | Female threaded Connector/Adapter for 28.58 mm outer dia X 15 mm nominal threaded |
| 1889 | Female threaded Connector/Adapter for 28.58 mm outer dia X 20 mm nominal threaded |
| 1890 | Female threaded Connector/Adapter for 28.58 mm outer dia X 25 mm nominal threaded |
| 1891 | Female threaded Connector/Adapter for 34.00 mm outer dia X 25 mm nominal threaded |
| 1892 | Female threaded Connector/Adapter for 34.00 mm outer dia X 32 mm nominal threaded |
| 1893 | Female threaded Connector/Adapter for 42.70 mm outer dia X 32 mm nominal threaded |
| 1894 | Female threaded Connector/Adapter for 42.70 mm outer dia X 40 mm nominal threaded |
| 1895 | Female threaded Connector/Adapter for 48.60 mm outer dia X 40 mm nominal threaded |
| 1896 | Female threaded Connector/Adapter for 48.60 mm outer dia X 50 mm nominal threaded |
| 1897 | Male threaded Connector/Adapter for 15.88 mm outer dia X 15 mm nominal threaded |
| 1898 | Male threaded Connector/Adapter for 22.22 mm outer dia X 15 mm nominal threaded |
| 1899 | Male threaded Connector/Adapter for 22.22 mm outer dia X 20 mm nominal threaded |
| 1900 | Male threaded Connector/Adapter for 28.58 mm outer dia X 20 mm nominal threaded |
| 1901 | Male threaded Connector/Adapter for 28.58 mm outer dia X 25 mm nominal threaded |
| 1902 | Male threaded Connector/Adapter for 34.00 mm outer dia X 25 mm nominal threaded |
| 1903 | Male threaded Connector/Adapter for 34.00 mm outer dia X 32 mm nominal threaded |
| 1904 | Male threaded Connector/Adapter for 42.70 mm outer dia X 32 mm nominal threaded |
| 1905 | Male threaded Connector/Adapter for 42.70 mm outer dia X 40 mm nominal threaded |
| 1906 | Male threaded Connector/Adapter for 48.60 mm outer dia X 40 mm nominal threaded |
| 1907 | Male threaded Connector/Adapter for 48.60 mm outer dia X 50 mm nominal threaded |
| 1908 | Valve Connector for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 1909 | Valve Connector for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 1910 | Valve Connector for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 1911 | Valve Connector for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 1912 | Valve Connector for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 1913 | Valve Connector for 42.70 mm outer dia X 40 mm nominal dia threaded |
| 1914 | Valve Connector for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 1915 | Female Threaded Elbow 90o for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 1916 | Female Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 1917 | Female Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 1918 | Female Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 1919 | Female Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 1920 | Female Threaded Elbow 90o for 42.70 mm outer dia X 32 mm nominal dia threaded |
| 1921 | Female Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded |
| 1922 | Female Threaded Elbow 90o for 48.60 mm outer dia X 40 mm nominal dia threaded |
| 1923 | Female Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 1924 | Male Threaded Elbow 90o for 15.88 mm outer dia X 15 mm nominal dia threaded |
| 1925 | Male Threaded Elbow 90o for 22.22 mm outer dia X 15 mm nominal dia threaded |
| 1926 | Male Threaded Elbow 90o for 22.22 mm outer dia X 20 mm nominal dia threaded |
| 1927 | Male Threaded Elbow 90o for 28.58 mm outer dia X 25 mm nominal dia threaded |
| 1928 | MaleThreaded Elbow 90o for 34.00 mm outer dia X 25 mm nominal dia threaded |
| 1929 | Male Threaded Elbow 90o for 34.00 mm outer dia X 32 mm nominal dia threaded |
| 1930 | Male Threaded Elbow 90o for 42.70 mm outer dia X 32 mm nominal dia threaded |
| 1931 | Male Threaded Elbow 90o for 42.70 mm outer dia X40 mm nominal dia threaded |
| 1932 | Male Threaded Elbow 90o for 48.60 mm outer dia X 40 mm nominal dia threaded |
| 1933 | Male Threaded Elbow 90o for 48.60 mm outer dia X 50 mm nominal dia threaded |
| 1934 | Cap for 15.88 mm outer dia pipe |
| 1935 | Cap for 22.22 mm outer dia pipe |
| 1936 | Cap for 28.58 mm outer dia pipe |
| 1937 | Cap for 34.00 mm outer dia pipe |
| 1938 | Cap for 42.70 mm outer dia pipe |
| 1939 | Cap for 48.60 mm outer dia pipe |
| 1940 | Pipe Bridge for 15.88 mm outer dia pipe |
| 1941 | Pipe Bridge for 15.88 mm outer dia pipe |
| 1942 | Pipe Bridge for 28.58 mm outer dia pipe |
| 1943 | 4 Point facade glass bracket |
| 1944 | 2 Point facade glass bracket |
| 1945 | 1 Point facade glass bracket |
| 1946 | Flate head bolt |
| 1947 | 400 fin plate at top |
| 1948 | Micro Silica |
| 1949 | Stop end tubes for diaphragmwall 600 mm dia. |
| 1950 | Driving end tubes for diaphragm wall 600 mm dia. |
| 1951 | Bi-Axial Extruded GeoGrid of Minimum Tensile Strength 15 kN/m in the longitudinal and transverse direction |
| 1952 | Bi-Axial Extruded GeoGrid of Minimum Tensile Strength 20 kN/m in the longitudinal and transverse direction |
| 1953 | Bi-Axial Extruded GeoGrid of Minimum Tensile Strength 30 kN/m in the longitudinal and transverse direction |
| 1954 | Bi-Axial Extruded GeoGrid of Minimum Tensile Strength 40 kN/m in the longitudinal and transverse direction |
| 1955 | Geosynthetic drainage with two filtering nonwoven geotextiles having a \\"W\\" configuration as longitudinal parallel channels. Minimum thickness to be 7.2 mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m and having plane flow capacity of 2.1 L/(m.s) at hydraulic gradient of 1.0 & 20kPa pressure tensile strength of 18kN/m with mass per unit area of 740 gsm |
| 1956 | Geosynthetic drainage composite havign thermobonding a draining core -HDPE geonet comprise to two set of parallel overlyed ribs integrally connected to have a rhomboidal shape with polyethylene film and a non woven geotextile having mass per unit are 130g/m2 and tensile strength of 8.0 kN/m having a plane flow capacity of 0.7 L/(m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile stength of 13.5 kN/m, with mass per unit are of 830 gsm |
| 1957 | Synthetic Geogrid having Ultimate tensile strength - 100kN/m |
| 1958 | Synthetic Geogrid Ultimate tensile strength - 150kN/m |
| 1959 | Synthetic Geogrid Ultimate tensile strength - 200kN/m |
| 1960 | Synthetic Geogrid Ultimate tensile strength - 250kN/m |
| 1961 | Synthetic Geogrid Ultimate tensile strength - 300kN/m |
| 1962 | Synthetic Geogrid Ultimate tensile strength - 350kN/m |
| 1963 | Synthetic Geogrid Ultimate tensile strength - 400kN/m |
| 1964 | Synthetic Geogrid Ultimate tensile strength - 500kN/m |
| 1965 | Synthetic Geogrid Ultimate tensile strength - 600kN/m |
| 1966 | Synthetic Geogrid Ultimate tensile strength - 700kN/m |
| 1967 | Synthetic Geogrid Ultimate tensile strength - 800kN/m |
| 1968 | Synthetic Geogrid Ultimate tensile strength - 900kN/m |
| 1969 | Synthetic Geogrid Ultimate tensile strength - 1000kN/m |
| 1970 | Synthetic Geogrid Ultimate tensile strength - 1100kN/m |
| 1971 | Synthetic Geogrid Ultimate tensile strength - 1200kN/m |
| 1972 | Aluminium profile industrial troughed sheet of alloy 31500/31000/40800, conforming to IS 1254, IS 737,IS 2676, 0.71 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm |
| 1973 | Aluminium profile industrial troughed sheet of Alloy 31500/31000/40800 conforming to IS 1254, IS 737, IS 2676, 0.91 mm thick, the profile detail width 1044/920 mm, cover width 1000/875 mm |
| 1974 | C.P Brass Centre Hole basin mixer with cast spout |
| 1975 | C.P. Brass Centre Hole Basin Mixer With Cast Spout ( Kigston/Marc/Prima/ Parko/ Hindware |
| 1976 | Petrol Liter 56.61 |
| 1977 | Carriage |
| 1978 | Carriage and sundries |
| 1979 | Sundries |
| 1980 | Premise 30.50% 1P |
| 1981 | G I wire |
| 1982 | 1st class picked Jhama Bricks(Traditional) |
| 1983 | Stone boulder( 225 mm above ) |
| 1984 | Stone boulder ( 225mm-150mm ) |
| 1985 | Soft rock metal |
| 1986 | Laterite Boulder |
| 1987 | Fine Sand |
| 1988 | Medium Sand |
| 1989 | Coarse Sand |
| 1990 | Bamboo (8cm-10cm dia) including fixing |
| 1991 | Eucalyptus Bullah (7.5cm -10cm dia) |
| 1992 | Eucalyptus Bullah (12.5cm -15cm dia) |
| 1993 | Eucalyptus Bullah (17.5cm -20cm dia) |
| 1994 | Sal Bullah (7.5cm -10cm dia) |
| 1995 | Sal Bullah (12.5cm -15cm dia) |
| 1996 | Sal Bullah (17.5cm -20cm dia) |
| 1997 | Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings |
| 1998 | Hire charges of Shuttering plank (25mm-30mm thick) without Prop including all fittings |
| 1999 | Hire charges of Shuttering plank (above 30mm-37mm thick) with Prop including all fittings |
| 2000 | Hire charges of 5 KVA Generator |
| 2001 | Hire charges of 3 KVA Generator |
| 2002 | Hire charges of Monkey set |
| 2003 | Loading unloading & stacking Sand/ stone aggregate (less than 40mm nominal size) |
| 2004 | Loading unloading & stacking stone aggregate (above 40mm nominal size) |
| 2005 | Loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material |
| 2006 | Stone Screening Type A (13.2 mm) |
| 2007 | Stone Screening Type B (11.2mm) |
| 2008 | 1st Class traditional Bricks (kiln burnt) |
| 2009 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 600, 700, 750 & 800 mm dia |
| 2010 | Loading, unloading & stacking by manual means (R.C.C. pipes , C.I. pipes and unreinforced Cement pipes) 900 mm dia |
| 2011 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1000, 1100 & 1200 mm dia |
| 2012 | Loading, unloading and stacking by Manual Means (R.C.C. pipes , C.I. pipes and unreinforced) Cement pipes 1400 & 1800 mm dia |
| 2013 | River bed material |
| 2014 | Sausage Wire Net |
| 2015 | Wood dust |
| 2016 | Tor Steel Rods/HYSD bars/TMT bars (SAIL/TATA/RINL) (Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 2017 | Tor Steel Rods/HYSD bars/TMT bars(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 2018 | Tor Steel Rods/HYSD bars/TMT bars (Other than Sail/TATA/RINL/JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) |
| 2019 | Loading, unloading and stacking by Manual Means of Steel |
| 2020 | Sal Silliguri |
| 2021 | Sal Malaysia |
| 2022 | Neem wood |
| 2023 | Other Local Wood |
| 2024 | Ordinary Teak wood |
| 2025 | Sisu/Gamar wood |
| 2026 | Local Sal Wood |
| 2027 | Bright finished or black enamelled mild steel screws 40 mm |
| 2028 | Bright finished or black enamelled mild steel screws 20 mm |
| 2029 | Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm |
| 2030 | Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm |
| 2031 | Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm |
| 2032 | Coal Tarring |
| 2033 | Fan Hook |
| 2034 | R.C.C ventilator of 20 mm. thick Upto 0.10 sq.m. area |
| 2035 | R.C.C ventilator of 20 mm. thick above 0.10 sq.m. area |
| 2036 | Udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 2037 | Chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 2038 | Udaypur marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 2039 | Chawk dungri marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m |
| 2040 | FRP composite door frame 66mm x 70mm |
| 2041 | FRP composite door frame 66mm x 90mm |
| 2042 | Coloured Pedestal type W.C. pan 580x440 mm (European type) S Trap |
| 2043 | 32 MM dia polythene flush pipe |
| 2044 | 18 mm thick marble partition slab for urinals including fitting fixing (with Chawk Doongri marble) |
| 2045 | GI pipe 32 mm dia medium quality for UNDERGROUND WORKS |
| 2046 | GI pipe 40 mm dia medium quality for UNDERGROUND WORKS |
| 2047 | CPVC (Chlorinated Polyvinyl Chloride) pipes (15 mm dia) [For Concealed Work] |
| 2048 | CPVC (Chlorinated Polyvinyl Chloride) pipes (20 mm dia) [For Concealed Work] |
| 2049 | CPVC (Chlorinated Polyvinyl Chloride) pipes (25 mm dia) [For Concealed Work] |
| 2050 | Thermocol 12.5 mm thick. |
| 2051 | Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 2052 | Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). |
| 2053 | Polythene Bib Cock / Stop Cock (HD) with metal/plastic inlet (EMCO / ATLAS or equivalent) |
| 2054 | Sink 630 mm X 550 mm X 180 mm with waste fittings and two coats of painting of C.I. brackets |
| 2055 | Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand. |
| 2056 | 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). |
| 2057 | Structural members of specified sections weighing less than -22.5 Kg./m (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964) |
| 2058 | Structural Works in Roof Trusses etc. using joists, channels and angles of specified section (conforming to IS: 226, IS: 808 & SP (6)- 1964) weighing less than 22.5 kg/ m |
| 2059 | M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 (trusses spanning up to 12.00 m) |
| 2060 | M.S. structural with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) Span up to 12 Mtr |
| 2061 | P.V.C. CONNECTOR 15 mm dia 600 mm long |
| 2062 | Polythene waste fittings complete 32mm |
| 2063 | Waste pipe, with PVC coupling at one end fitted with necessary clamps 900 mm long |
| 2064 | Fly Ash Bricks(Traditional) |
| 2065 | Iron hasp bolt 250mm long |
| 2066 | Iron door ring 50mm dia |
| 2067 | Iron Catch Hook 6mm dia 225mm long |
| 2068 | M.S Clamps 40mm X 6mm, 125mm Length |
| 2069 | Anodised aluminium barrel / tower / socket bolt 150mm long x 10mm dia. bolt. |
| 2070 | Anodised aluminium barrel / tower / socket bolt 300mm long x 10mm dia. bolt. |
| 2071 | Anodised aliminium D-type handle continuous plate base (Hexagonal/ Round rod) 150 mm grip x 10 mm dia rod |
| 2072 | Towel rail (CP over brass )- 600 mm |
| 2073 | Collapsible gate |
| 2074 | Steel railing |
| 2075 | MS Integrated grill for steel window and ventillator |
| 2076 | 1.5 mm thick ms sheet |
| 2077 | CI manhole cover 450 mm dia |
| 2078 | C.P. over brass Waste fittings 32 mm |
| 2079 | Malayasia sal cleat |
| 2080 | Two point nose steel handle |
| 2081 | Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. |
| 2082 | two point nose window handle |
| 2083 | top hung side hung ventillator |
| 2084 | Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm |
| 2085 | C.P. over brass Waste fittings 32 mm |
| 2086 | Empty Gunny Bag |
| 2087 | waste pipe, with PVC coupling at one end fitted with necessary clamps900 mm long |
| 2088 | waste pipe, with PVC coupling at one end fitted with necessary clamps 750 mm long |
| 2089 | False ceiling (with 4mm thick Pearl Designer Fibre Cement Board) |
| 2090 | False ceiling (with 6 mm thick Fiber Cement Designer Board) |
| 2091 | Supplying, fitting & fixing Asbestos corrugated sheet(6 mm thick) |
| 2092 | Supplying, fitting & fixing Asbestos ridging |
| 2093 | Supplying, fitting & fixing Zn-Al alloy steel sheet work In Roof |
| 2094 | Supplying, fitting & fixing Aluminium sheet ridging |
| 2095 | fitting and fixing glass reinforced polyester translucent fiber glass sheet |
| 2096 | fitting and fixing glass reinforced polyester translucent ridging |
| 2097 | fitting & fixing circular corrugated Aluminium sheet |
| 2098 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window |
| 2099 | Supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf Aluminium swing door |
| 2100 | Supplying, fitting & fixing of Aluminium fixed partition wall of all aluminium sections |
| 2101 | UPVC Plain Y 75 mm dia |
| 2102 | UPVC Plain Y 110 mm dia |
| 2103 | Supplying solid flush type doors of commercial quality |
| 2104 | Supplying fitting and fixing of bitumen drum sheet including nails for pilling or other works. |
| 2105 | Bitumen VG-30 |
| 2106 | Modular fly ash bricks |
| 2107 | Modular clay bricks |
| 2108 | Bitumen Emulsion |
| 2109 | Precast cement concrete blocks (Nominal Mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar) |
| 2110 | Grade 1 stone metal 63 mm to 45 mm |
| 2111 | Locking Spring (Zig Zag). |
| 2112 | Fencing Post 215 cm 150 mm X 150 mm section at bottom, 100 mm X 100 mm section at top with T-Base 300 mm X 150 mm X 100 mm, having 4 nos 6 mm dia vertical M.S. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth |
| 2113 | Fixing post of iron or precast concrete incl. digging hole, packing the hole with cement concrete (1:3:6) with jhama khoa and necessary plaster with 15 cm th cement plaster (1:6) complete |
| 2114 | Polythene sheet (150 gm per sqm) |
| 2115 | Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 2116 | Galvanised Barbed wire 3 ply 12 gauge / 4 points including fittings and fixing to the post complete in all respect. |
| 2117 | Fixing Barbed wire to the post including fiting fixing. |
| 2118 | Shower jet |
| 2119 | Corner Urinal |
| 2120 | CI P trap |
| 2121 | CI S Trap |
| 2122 | Porcelain P trap |
| 2123 | Porcelain S trap |
| 2124 | Check valve 32mm |
| 2125 | Check valve 40mm |
| 2126 | Check valve 50mm |
| 2127 | Hire charges for 5 HP with operator,fuel and shifting etc all charges complete |
| 2128 | Hire charges for hand cart, tri cycle, trolly, Panja, Kata,GI Bucket, Boxes, Basket etc complete set |
| 2129 | Reducing socket 20mm x 15mm |
| 2130 | Reducing socket 25mm x 20mm |
| 2131 | Reducing socket 25mm x 15mm |
| 2132 | Reducing Elbow 20 mm x 15 mm |
| 2133 | Reducing Elbow 25 mm x 20 mm |
| 2134 | Open Weave Jute Geo-textile (JGT) having overall weight of 500 gm per Sq. M thickness 5 mm, width 1220 mm, Tensile strength 10 KN/m x 7.50 KN/m including lapping, staples or nails, testing |
| 2135 | Woven Jute Geo-textile (JGT) 724 gm/sqm possessing tensile strength of 25 KN/m including lapping, staples or nails, testing |
| 2136 | Sieve |
| 2137 | Nylon Net |
| 2138 | Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts by means of galvanised \\"C\\" clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G. 5 mm. x 75 mm. x 8 g. |
| 2139 | P.V.C.water storage tank 1000 lit (Bankura) |
| 2140 | RoofTrussesetc.usingjoists,channelsand angles of specified section weighing less than 22.5 kg/ m (Bankura) |
| 2141 | Squareorhexagonalmeshnettingmadewith18B.W.G.galvanisedwire,fittedandfixedcompleteasperdesign(excludingthesupportingframeworkbutincluding local sal wood battens of size 37.5mmx25mm) 25 mm (Bankura) |
| 2142 | Silver sand |
| 2143 | Loading unloading and stacking by Manual Means Tar, Bitumen etc |
| 2144 | Medium Sand |
| 2145 | Boulder 30/45 KG, Pakur Variety |
| 2146 | ornamental grill above 16 kg |
| 2147 | teak wood |
| 2148 | Water Tanker 500 lt capacity |
| 2149 | Orissa pattern water closet 530x410 mm |
| 2150 | Jute rope |
| 2151 | Coconut rope |
| 2152 | Poly rope |
| 2153 | Shovels |
| 2154 | Mulberry Stem Cutting 6 \\" height and Dia pencil thickness |
| 2155 | Supply of Napier Grass |
| 2156 | Supply of Mat slips |
| 2157 | Limestone powder |
| 2158 | Gypsum |
| 2159 | Rice Husk/ Sugar baggase (As per availability in local market) |
| 2160 | Coco Peat (Loose) not more then 10% moisture content |
| 2161 | Coco Peat (Block @ 2 Kg.) |
| 2162 | Jeevamrit, in concentrated for Miyawaki |
| 2163 | Ghan Jeevamrit for Miyawaki |
| 2164 | Farm Yard Manure/Cowdung (@ max 20% moisture content) |
| 2165 | Vermi Compost |
| 2166 | Neem based Vermi compost |
| 2167 | Neem khol or other Oil seed cake |
| 2168 | Bone dust |
| 2169 | Sesbania grandiflora / Bok Ful |
| 2170 | Murraya koenigii (L.) Sprengel / Curry Leaf |
| 2171 | Neem oil 10000 ppm |
| 2172 | 2:1:1 NPK based Organic manure |
| 2173 | 5:1:1 NPK based Organic manure |
| 2174 | Hypopot (150 CC) |
| 2175 | Hypopot (300 CC) |
| 2176 | Hypopot (500 CC) |
| 2177 | Poly Tube (4\\" X 6\\" ) |
| 2178 | Poly Tube (6\\" X 8\\" ) |
| 2179 | Poly Tube (8\\" X 12\\" ) |
| 2180 | Poly pot of 8\\"X4\\" |
| 2181 | Poly pot of 8\\"X8\\" |
| 2182 | Poly pot of 12\\"X8\\" |
| 2183 | Bio Pesticides |
| 2184 | Bio Fungicides |
| 2185 | Copper Oxychloride 50% |
| 2186 | Imida-Chlorpide 17.8% SL |
| 2187 | Carbofuran-3G |
| 2188 | Chloropyriphos 50% EC |
| 2189 | Zinc phosphide |
| 2190 | Carbendazim 50 WP Fungicides i.e Bavistin |
| 2191 | Seed treating chemicals |
| 2192 | Spraying machine (Hire) per day |
| 2193 | Hand Held sprayer 1 lit. capacity |
| 2194 | Budding and grafting tep (3 cm & 100 m) |
| 2195 | Budding cum grafting knife |
| 2196 | Fogger 4 Way |
| 2197 | UV Wire |
| 2198 | Poly sheet for mulching |
| 2199 | Lock & key |
| 2200 | Buckets |
| 2201 | Jharii / Rose can |
| 2202 | Polly bottle 2 Lit |
| 2203 | Earthen pot of 5 Lit capacity |
| 2204 | Sieve |
| 2205 | Filter funnel |
| 2206 | Water can (5 Lit.) |
| 2207 | Higher charge of Water carriers for RSP only(per day of 1000 lt) |
| 2208 | Carrage Charge of water for RSP only (per time) |
| 2209 | Electric wire, Switch board |
| 2210 | Locking Spring (Zig Zag) |
| 2211 | Lateral Pipe 16 mm |
| 2212 | Control Valve 40 mm |
| 2213 | Flash Valve |
| 2214 | Screen Filter |
| 2215 | Modular Sprinkler |
| 2216 | Shower |
| 2217 | Transportation charges of saplings on road within the Gram Panchayat including loading and unloading |
| 2218 | Transportation charges of saplings on road within the Block (Per 1000 Nos. of Saplings & up to 40 Km.) including loading and unloading. |
| 2219 | Transportation charges of saplings on road within the District (Per 1000 Nos. of Saplings & up to 70 Km.) |
| 2220 | Transportation charges of saplings on Boat within the Gram Panchayat including loading and unloading. |
| 2221 | Transportation charges of saplings on Boat within the Block (Per 1000 Nos. of Saplings & up to 30 Km.) including loading and unloading |
| 2222 | Bamboo |
| 2223 | Rent of JCB Machine for Miywaki only |
| 2224 | Drums Big Size |
| 2225 | Nagar Patta (only for Miyawaki) |
| 2226 | Good earth carrage |
| 2227 | CIB for all type of community plantation works |
| 2228 | 3/4 D PVC pipe |
| 2229 | Amrapali Mango Grafted |
| 2230 | Mallika Mango Grafted |
| 2231 | Chatterjee Mango Grafted |
| 2232 | Himsagar Mango Grafted |
| 2233 | Langra Mango Grafted |
| 2234 | Alphonso Mango Grafted |
| 2235 | Kohitur Mango Grafted |
| 2236 | Maya Mango Grafted |
| 2237 | Austin Mango Grafted |
| 2238 | Lily Mango Grafted |
| 2239 | Ratna Mango Grafted |
| 2240 | Neelam Mango Grafted |
| 2241 | Gopal bhog Mango Grafted |
| 2242 | Khirsa Mango Grafted |
| 2243 | Gulabkhas Mango Grafted |
| 2244 | Deshari Mango Grafted |
| 2245 | Khaja / L-49 Guava Layering |
| 2246 | Allahabed Safeda Guava Layering |
| 2247 | Sathugudi Sweet Orange Budded |
| 2248 | Vikram / Ramalini Acid Lime Budded / Seedling |
| 2249 | BAU Kul-1 Apple Kul Air Layerd |
| 2250 | China, Bombai Litchi Air Layerd |
| 2251 | Calcutta round/Cricket Ball Sapota Grafted |
| 2252 | Ra Jamun, Jam Budded |
| 2253 | Golden (NMK-1)/ Arka Sahan/ Arka Nilachal Vikram, Aata Grafted |
| 2254 | J-33/ Jackfruit Grafted |
| 2255 | VNR-1 / Arka kiran/ Guava Saplings Layering |
| 2256 | G & Y Dwarf/ Coconut Saplings From Seed |
| 2257 | Costal Tall/ Coconut Saplings From Seed |
| 2258 | Honey crisp/Anna/ Tropical Beauty/Dorsett Golden/ Apple Saplings Budded |
| 2259 | Tenera/ Oil Palm Saplings From Seed |
| 2260 | Honey Dew, Coorg Green, Red Lady, Thailand 786, Papaya Saplings |
| 2261 | Darogaji/ Bael Budded Saplings |
| 2262 | Iteema/ Arabian Date ( M & F) Tissue culture Saplings |
| 2263 | Red Flesh/ Dragon Fruits Saplings Rooted Cutting |
| 2264 | Local Egg fruit Saplings Cutting |
| 2265 | Capri, Pedro/ Fig Saplings Cutting |
| 2266 | Thar kamal/ Karonda Air Layerd |
| 2267 | Bhagwa/ Pomegranate Tissue culture |
| 2268 | Arka. E25/11 / Thompson seed less/ Grape Vine Root Cutting |
| 2269 | Fair Fox, Ofra, Sweet Charly, Winter dawn/ Straw Berry Cutting |
| 2270 | KKM-1/ Moringa Saplings From Seed |
| 2271 | Terminalia chebula / Haritaki |
| 2272 | Gmelina arborea / Gamhar |
| 2273 | Mangifera Indica / Mango |
| 2274 | Bombax ceiba / Shimul |
| 2275 | Acacia Catechu /Khair |
| 2276 | Ficus racemosa /Jog dumur |
| 2277 | Terminalia arjuna / Arjun |
| 2278 | Emblica officinalis / Amla |
| 2279 | Acacia Nilotica / Babul |
| 2280 | Peltophorum pterocarpum / Radhachura |
| 2281 | Dolonix regia / Krishnachura |
| 2282 | Millettia pinnata / karanja |
| 2283 | Carrissa carandas / Karamcha |
| 2284 | Azadirachta indica / Neem |
| 2285 | Acacia auriculiformis / Akashmoni |
| 2286 | Swietenia mahogany / Mahogini |
| 2287 | Tcetona grandis Segun / Teak |
| 2288 | Chukrasia tabularis / Chikrasi |
| 2289 | Polyalthia longifolia / Debdaru |
| 2290 | Grevillea robusta / Silver Oak |
| 2291 | Syzygium cumini / Jaam, Kalo Jaam |
| 2292 | Phoenix sylvestris / Khajoor |
| 2293 | Schleichera oleosa / Kusum |
| 2294 | Hymenodictyon excelsum / Lati karma, latikarum |
| 2295 | Terminalia tomentosa / Asan |
| 2296 | Ficus benghalensisBar / Bargad, Bat |
| 2297 | Semecarpus anacardium / Bhela, Bhelai |
| 2298 | Cassia fistula / Amaltash |
| 2299 | Buchanania cochinchinensis / Piyal (Chiroli) |
| 2300 | Albizia odoratissima / Sada Siris |
| 2301 | Albizia procera / Safed siris |
| 2302 | Holoptelea integrifolia / Challa |
| 2303 | Lannea coromandelica / Doka (moi) |
| 2304 | Gmelina arborea / Gamhar |
| 2305 | Madhuca longifolia / Mohul, Mahul, Mahua |
| 2306 | Ficus racemosa Jog dumur |
| 2307 | Aegle Marmelos / Bel |
| 2308 | Ixora pavetta / Lohajangi |
| 2309 | Butea monosperma / Red Palash |
| 2310 | Butea monosperma / Palash (Yellow) |
| 2311 | Not for use |
| 2312 | Cleistanthus collinus / Parasi |
| 2313 | Not for use |
| 2314 | Olax scandens / Badru |
| 2315 | Nyctanthes arbor-tristisseoli / shiuli |
| 2316 | Murraya paniculata / Kamini |
| 2317 | Grewia asiatica / Phalsa,Shunkri |
| 2318 | Terminalia bellerica / Boheda, bahera |
| 2319 | Borassus flabellifer / Tal, Toddy |
| 2320 | Tamarindus indica / Tentul |
| 2321 | Saraca asoca / Ashok |
| 2322 | Mimusops elengi / Bokul |
| 2323 | Diospyfos tomentose / Raktamandar |
| 2324 | Neolamarckia cadamba / Kadam |
| 2325 | Annona squamosa / Aata |
| 2326 | Ficus hispida / Dumur |
| 2327 | Anacardium occidentali / Kaju |
| 2328 | Mringa pterygosperma / Sojina |
| 2329 | Accicia aurculifomis / Sonajhuri |
| 2330 | Cassia siamea / Mingiri |
| 2331 | Averrhoa caeambola / Kamranga |
| 2332 | Strychnos nux-vomica / Kuchila |
| 2333 | Dalbergia sissoo / Sissal |
| 2334 | Agave sisalana / Sisal |
| 2335 | Artocarpus heterophyllus / Jack fruit |
| 2336 | Adhatoda vasica / Vasak |
| 2337 | Solanum khasianum / Banbegun |
| 2338 | Pithecellobium dulce / Jungle jalebi |
| 2339 | Marraya exolica / Kamini |
| 2340 | Ficus rumphis / Pakur |
| 2341 | Ziziphus mauritiana / Kul |
| 2342 | Averrhoa caeambola / Kamranga |
| 2343 | Bambosa Multiplex / Bamboo Ornamental |
| 2344 | T. Olivery / Bamboo Commercial |
| 2345 | D, Calostachyus / Bamboo |
| 2346 | Shorea robusta / Sal |
| 2347 | Ochna squarrosa / Kanak chapa |
| 2348 | Haldina cordifolia / Heldu |
| 2349 | Hibiscus mutabilis / Confederate rose |
| 2350 | Brassica adhatoda / Bashak |
| 2351 | Samanea saman / Rain Tree (Chatka) |
| 2352 | Legerstroemia speciosa / Jarul |
| 2353 | Trewia nudiflora /Champituli |
| 2354 | Albizia procera / koroi |
| 2355 | Diospyros discolor / Gab |
| 2356 | Chukrasia velutina / Chikrasi |
| 2357 | Courouptia guianensis / Nagalingam |
| 2358 | Trophis aspera / Sheora |
| 2359 | Limonia acidissima / Kodbel |
| 2360 | piliostigma malabaricum / kanchan |
| 2361 | Cassia fistula / Altamas (Banderlathi) |
| 2362 | Tecoma stana / Tekoma |
| 2363 | Polyalthia coffeoides / Humjam |
| 2364 | Salvadora persica / Anskoli |
| 2365 | Dalbergia sissoo / Sissoo |
| 2366 | Commiphora wightii / Gokul |
| 2367 | Averrhoa bilindi / Bilindi |
| 2368 | Olea europea / Jolpai |
| 2369 | Annona reticulata / Nona Ata |
| 2370 | False mangosteen / Tomal |
| 2371 | Syzygium jambos / Golap Jam |
| 2372 | Dillenia indica / Chalta |
| 2373 | Spondias cytherea / Bileti Amra |
| 2374 | Toona ciliate / Toon |
| 2375 | Asparagus racemosus / Satamuli |
| 2376 | Rauwolfia serpentina / Sarpagandha |
| 2377 | Khaya anthotheca / Lambu |
| 2378 | Drumstick Saplings |
| 2379 | Jhau saplings (Local Name) |
| 2380 | Indian Olive/Jalpai Seedlings |
| 2381 | Cycle tier tube |
| 2382 | Concrete pole with Iron made circular ring of 4 '' X 3'' X 8 ft. Dimension |
| 2383 | SGS Seed (10 variety) |
| 2384 | QGS Seed (10 variety) |
| 2385 | Poly tube 8 inch x 4 inch |
| 2386 | Bamboo Konchi |
| 2387 | Bamboo Rhizome |
| 2388 | Commercial Bamboo Seedlings |
| 2389 | Arecanut Seed |
| 2390 | Cost of Grafting |
| 2391 | Cost of Graft (scion) |
| 2392 | Cost of Cutting Stems 8 inch long |
| 2393 | All type of plants gooti |
| 2394 | Khari stick |
| 2395 | Saplings for Miyawaki Forest (including 10% extra for mortality) |
| 2396 | Netting Dhanga |
| 2397 | Micro Sprinkler Irrigation system (Supply, fitting & fixing) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 12, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Nov 17, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 5 daysNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender