Tender For Annual Rate Contract For Providing, Laying, Jointing And Commissioning Of Rising Main Pipe Line, Relaying And Interconnection Work For Existing Pipe Line Under Sub. Dn. Marwar Junction. (Revised Phed Bsr 2023 Exclusive Of Gst & O&M Bsr Jod
Tender Value
1.50 Crore
Estimated cost
Bid Submission
17 Nov 2026
5 days left
EMD
3 Lakhs
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pali → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For Providing, Laying, Jointing And Commissioning Of Rising Main Pipe Line, Relaying And Interconnection Work For Existing Pipe Line Under Sub. Dn. Marwar Junction. (Revised Phed Bsr 2023 Exclusive Of Gst & O&M Bsr Jodhpur 2020)
BOQ
| Sl. No. | Item Description |
| 1 | Providing, lowering, laying and jointing in trenches, standard lengths ISI marked Rigid PVC-O S/S Pipes (push on joints) as per IS-16647: 2017 (amended up to date) with EPDM Gasket seals on joints including transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, laying of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter.Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Rates are exclusive of GST.PVC-O pipe Class 500 PN-16110 mm dia |
| 2 | 160 mm dia |
| 3 | 200 mm dia |
| 4 | 250 mm dia |
| 5 | PVC-O pipe Class 500 PN-12.5110 mmdia |
| 6 | 160 mm dia |
| 7 | 200 mm dia |
| 8 | PTMT Bib CockProviding and fixing ISI mark (IS 9763: 2000 or amended up to date) PTMT bib cock 15 mm nominal bore, minimum weight 92 gms and length 100 mm as per technical specification, approved make and direction of Engineer in charge.Rate is exclusive of GST. |
| 9 | Double chambered restrained joint DI PipesProviding, lowering, laying and jointing of ISI marked Double chambered restrained joint DI K9 Pipes confirming to IS:8329-2000 (amended upto date); restrained joints are designed and tested as per ISO 10804: 2018 (to be used for minimum required length as per design along with double chambered restrained DI fittings to avoid concrete thrust block at bends) including rubber gaskets confirming to IS 5382 -1985/8329-2000 with latest amendments and locking bars & rubber spacers , conveying to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading, cutting of pipes wherever necessary, jointing with DI special (excluding the cost of restrained joint specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost includes all accessories and hydraulic test to the required pressure and cost of all jointing materials etc complete including satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Rates are exclusive of GST.100 mm |
| 10 | 150 mm |
| 11 | 200 mm |
| 12 | 250 mm |
| 13 | 300 mm |
| 14 | 350 mm |
| 15 | 400 mm |
| 16 | Providing, lowering, laying, aligning, fixing in position and jointing at level/ depths Ductile Iron Double Chambered Restrained Joint specials confirming to IS 9523 : 2000 of Class K-12 with internal Cement mortar lining and external Zinc rich paint coating followed by a finishing layer of bitumen coating duly ISI marked. Joints will be of Double Chamber Restrained Type as per ISO 10804:2018 including rubber gasket confirming to IS 5382 : 1985 and locking bars & rubber gaskets etc complete as per technical specifications and direction of Engineer-in-charge, (excluding earth work).Rates are exclusive of GST.1.36.1 Upto 300 mm Diameter |
| 17 | Above 300 mm and up to 600 mm diameter |
| 18 | Above 600 mm diameter |
| 19 | Providing, lowering, laying, aligning, fixing in position at all level/ depths CI Class - B specials as per IS : 1538, amended up to date in trenches complete including all material, labour, testing and commissioning along with pipe line/ appurtenance as per Technical Specifications and as per direction of Engineer. Note : E/w to be measured and paid separately.Rates are exclusive of GST.Plain ended CI specials including tail piece, spigot end and socket end.Up to 300 mm dia |
| 20 | Above 300 mm and up to 600 mm dia |
| 21 | Double flanged CI pipe fittings.Up to 300 mm dia |
| 22 | Above 300 mm and up to 600 mm dia |
| 23 | De-jointing and removing of already laid CI/DI pipes of following diameters in excavated trenches with care, without damaging pipes, CID joints, valves, specials etc. and other materials and then refilling of soil after de-laying and de-jointing of pipelines with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr. This also include stacking the pipes with care and transporting the same to div./sub div. store or as directed by EIC with in the division. (Rates are Exclusive of Earth Work)Rates are exclusive of GST.80 mm |
| 24 | 100 mm |
| 25 | 125 mm |
| 26 | 150 mm |
| 27 | 200 mm |
| 28 | 250 mm |
| 29 | 300 mm |
| 30 | 350 mm |
| 31 | 400 mm |
| 32 | De-jointing and removing of already laid MS pipes of following diameters in excavated trenches with care, without damaging pipes, CID joints, valves, specials etc. and other materials and then refilling of soil after de-laying and de-jointing of pipelines with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr. This also include stacking the pipes with care and transporting the same to div./sub div. store or as directed by EIC with in the division. (Rates are Exclusive of Earth Work)Rates are exclusive of GST.100 mm |
| 33 | 125 mm |
| 34 | 150 mm |
| 35 | 200 mm |
| 36 | 250 mm |
| 37 | 300 mm |
| 38 | 350 mm |
| 39 | 400 mm |
| 40 | Laying, Jointing, Testing and Commissioning of uPVC/ PVC Pipes (Class- 3/ 4) in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials)Rates are exclusive of GST.90 mm |
| 41 | 110 mm |
| 42 | 125 mm |
| 43 | 140 mm |
| 44 | 160 mm |
| 45 | 180 mm |
| 46 | 200 mm |
| 47 | 225 mm |
| 48 | 250 mm |
| 49 | 280mm |
| 50 | 315 mm |
| 51 | Laying, Jointing, Testing and Commissioning of Ductile Iron (DI) Pipes of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials)Rates are exclusive of GST.80 mm |
| 52 | 100 mm |
| 53 | 125 mm |
| 54 | 150 mm |
| 55 | 200 mm |
| 56 | 250 mm |
| 57 | 300 mm |
| 58 | 350 mm |
| 59 | 400 mm |
| 60 | Laying, Jointing, Testing and Commissioning of AC Pressure Pipes (Class- 10/15/20) of any class in assorted length with specials, valves etc. including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials)Rates are exclusive of GST.80 mm |
| 61 | 100 mm |
| 62 | 125 mm |
| 63 | 150 mm |
| 64 | 200 mm |
| 65 | 250 mm |
| 66 | 300 mm |
| 67 | 350 mm |
| 68 | 400 mm |
| 69 | Laying, Jointing, Testing and Commissioning of HDPE pipes of any grade in assorted length with specials, valves etc. with jointing material/ fixing of necessary jointing material like mechanical connector i.e. thread/ insert joint/quick release coupler joint compression fitting joint or flanged joint and jointing pipe in proper position and jointing of all specials by butt fusion / electro fusion welding method, including local handling and transportation from PHED store and then refilling of soil with proper compaction and disposing of all surplus soil as directed with in a lead of 30 mtr as per satisfaction of EIC. (Rates are Exclusive of Earth Work and jointing materials) Rates are exclusive of GST. 90 mm |
| 70 | 110 mm |
| 71 | 125 mm |
| 72 | 140 mm |
| 73 | 160 mm |
| 74 | 180 mm |
| 75 | 200 mm |
| 76 | 225 mm |
| 77 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.Rates are exclusive of GST.MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) |
| 78 | MS pipe specials above 600mm dia(with minimum 6.3mm thickness sheet) |
| 79 | Manufacturing, supplying ,lowering, laying and jointing in position to correct line spirally welded SAW/Fabricated MS Pipe having bevelled end plates / coils, confirming to IS 3589-2001 or its latest revision/ amendments, for following thickness and inside diameter,including transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.), field joints, satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge; (excluding earthwork, internal lining and outer coating). Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.Rates are exclusive of GST.Outer dia of pipe 219.1 mm and thickness2.6 mm |
| 80 | 3.2 mm |
| 81 | 4.5 mm |
| 82 | Outer dia of pipe 273 mm and thickness3.6 mm |
| 83 | 6.3 mm |
| 84 | Outer dia of pipe 323.9 mm and thickness4 mm |
| 85 | 4.5 mm |
| 86 | 5.6 mm |
| 87 | 7.1 mm |
| 88 | Outer dia of pipe 355.6 mm and thickness4 mm |
| 89 | 5.6 mm |
| 90 | 7.1 mm |
| 91 | Outer dia of pipe 406.4 mm and thickness4 mm |
| 92 | 6.3 mm |
| 93 | 7.1 mm |
| 94 | 8.8 mm |
| 95 | Outer dia of pipe 457 mm and thickness4 mm |
| 96 | 6.3 mm |
| 97 | 7.1 mm |
| 98 | 8.8 mm |
| 99 | Outer dia of pipe 508 mm and thickness5 mm |
| 100 | 5.6 mm |
| 101 | 6.3 mm |
| 102 | 7.1 mm |
| 103 | 8.8 mm |
| 104 | 10 mm |
| 105 | 11 mm |
| 106 | Outer dia of pipe 610 mm and thickness5.8 mm |
| 107 | 6.3 mm |
| 108 | 7.1 mm |
| 109 | 8.8 mm |
| 110 | 10 mm |
| 111 | 11 mm |
| 112 | 12.5 mm |
| 113 | Providing, lowering, laying, aligning, fixing in position and jointing at all level/ depths DI standard specials with rubber ring (EPDM)/ nut bolt and insertion sheet and jointing as per IS: 9523-2000 or as amended up to date, such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge (excluding earth work). Rates are exclusive of GST. All End SocketedUp to 300 mm Diameter |
| 114 | Above 300mm and up to 600 mm diameter |
| 115 | Above 600 mm diameter |
| 116 | All End FlangedUp to 300 mm Diameter |
| 117 | Above 300mm and up to 600 mm diameter |
| 118 | Above 600 mm diameter |
| 119 | Single Flange/ MJ CollarUp to 300 mm Diameter |
| 120 | Above 300mm and up to 600 mm diameter |
| 121 | Above 600 mm diameter |
| 122 | Double Flange Pipe (up to 1 mtr. length)Up to 300 mm Diameter |
| 123 | Above 300mm and up to 600 mm diameter |
| 124 | Above 600 mm diameter |
| 125 | Work of Inter Connection in CI/DI/MS pipe line up to 1.5 mtr depth by digging out suitable size of pit at site of work including dewatering and providing adequate safety arrangement at site, cutting of existing pipeline, jointing of Tee (complete) and other specials to make inter connection repair leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers for entire job contractor will use his own T&P & labour and will arrange transportation of material required from store. (Material such as Tee/ Tee Clamp/rubber sheet/ CID joints required for inter connection shall be provided by the department free of cost).In all type Soil80 mm to 100 mm |
| 126 | 125 mm to 150 mm |
| 127 | 200 mm to 300 mm |
| 128 | 350 mm to 450 mm |
| 129 | 500 mm to 600 mm |
| 130 | Add on above item no.1.10.1 for B.T. Road |
| 131 | Add on above item no.1.10.1 for CC Road. Pit in CC Road shall be cut in optimum size through CC cutter Machine only. |
| 132 | Add on above item no.1.10.1 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr |
| 133 | Labour charges for removal of complaint of polluted water supply to the consumers Survey of the locality of polluted water supply for preliminary assessment of source of pollution during supply hours |
| 134 | Labour charges for digging of pit of suitable size for removal of water pollution on existing distribution AC/PVC/uPVC/HDPE pipe lines up to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault in pipe line by fixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size In all type Soil50 to 75 mm |
| 135 | 80-110 mm |
| 136 | 125 to 165 mm |
| 137 | 200 to 300 mm |
| 138 | 350 to 400 mm |
| 139 | Add on above item no.1.12.1 for B.T. Road |
| 140 | Add on above item no.1.12.1 for CC Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only. |
| 141 | Add on above item no. 1.12.1 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr. |
| 142 | Labour charges for digging of pit of suitable size for removal of water pollution on existing distribution CI/DI/MS pipe lines up to 1.5 mtr depth including cutting of pipe and assessment of direction of flow of polluted water during non supply hours, identifying the source of pollution and repairing of fault pipe line by fixing of pipe piece with jointing material (pipe and jointing material shall be supplied by department) to make it leak proof and then refilling of excavated tench / pit / road shall be done properly i.e after a layer of 20 cm with proper watering and ramming in layers. The rate includes all labour charges to complete the work for pipe size In all type Soil80-100 mm |
| 143 | 125 to 150 mm |
| 144 | 200 to 300 mm |
| 145 | 350 to 450 mm |
| 146 | Add on above item 1.13.1 for B.T. Road |
| 147 | Add on above item no. 1.13.1 for CC Road.Pit in CC Road shall be cut in optimum size through CC cutter Machine only. |
| 148 | Add on above item no.1.13.1 if depth of pipe line is above 1.5 mtr and up to 3.0 mtr. |
| 149 | Restoration of bitumen road by patch work of WBM using crushed / broken aggregate as per the standard specification and consolidation with hand rammer spreading and consolidation of binding material , cleaning of surface of WBM and providing of seal & tack coat as per site condition by using ready cold mix up to the satisfaction of engineer in charge. The rate includes the making of pit in regular shape, all labour, material and T&P charge complete job. |
| 150 | Restoration of cement concrete road including making of pit in regular shape, ramming and consolidation of surface, laying, positioning and compacting cement concrete ( M-20 ) minimum thickness 200 mm upto the satisfaction of engineer incharge. The rate includes the making of pit in regular shape, all labour, material and T&P charge complete job. |
| 151 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soilRate is exclusive of GST. |
| 152 | Add extra for trenches for every additional lift over item no 4.1Rates are exclusive of GST.Above 1.5 mtr and up to 3.0 mtr. |
| 153 | Above 3.0 mtr and up to 4.5 mtr. |
| 154 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required .:Rates are exclusive of GST.Ordinary rock |
| 155 | Hard rock (requiring blasting) |
| 156 | Hard rock(blasting prohibited) |
| 157 | Add extra for trenches for every additional lift over item no 4.3Rates are exclusive of GST.Above 1.5 mtr and up to 3.0 mtr. |
| 158 | Above 3.0 mtr and up to 4.5 mtr. |
| 159 | Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.Rate is exclusive of GST. |
| 160 | Dismantling of flexible pavement for pipe line and chambers by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks per technical specification and scope of work.Rates are exclusive of GST.Bituminous courses |
| 161 | Granular courses |
| 162 | Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.Rate is exclusive of GST. |
| 163 | Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work.Rates are exclusive of GST.M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 164 | Plain cement concrete pavement of M-30 Grade |
| 165 | Removing & Re-fixing of Precast concrete interlocking blocks for laying of pipe line by manual method, stacking of serviceable & non serviceable material separately, disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block against damaged, including all lead and lift as per Technical specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm) Note: If existing precast block used more than 70%, than for every 1% use above 70%, deduction of 1% in cost shall be done for every 1% use above 70%. Rates are exclusive of GST.60 mm thick. |
| 166 | 80 mm thick. |
| 167 | 100 mm thick Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender