Tender For Construction And Maintenance Of Staff Quarters Range Biopark Sajjangarh
Tender Value
15 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
30000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction And Maintenance Of Staff Quarters Range Biopark Sajjangarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : PWD BSR 2026 CH-B 1/ Item 1.9.1 |
| 2 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2026 CH-B3/ Item 3.1.4 |
| 3 | Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand) PWD BSR 2026 CH-B6/ Item 6.1.6 |
| 4 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : cement mortar 1:6 (1 cement : 6 coarse sand) PWD BSR 2026 CH-B5/ Item 5.2.2 |
| 5 | Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in . cement mortar 1:4 (1 cement : 4 coarse sand) PWD BSR 2026 CH-B5/ Item 5.8.2 |
| 6 | Random rubble dry stone Kharanja under floor. PWD BSR 2026 CH-B -11 / Item 11.26 |
| 7 | Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BSR 2026 CH-B3/ Item 3.1.2 |
| 8 | Centering and shuttering with steel plates including strutting propping, barcing both ways with woodens members and removal of form work upto floor three level for: Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates, anchor blocks, sills, chhajjas, lintel, beam, plinth beam etc. PWD BSR 2026 CH-B 4/ Item 4.10.2 |
| 9 | providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix PWD BSR 2026 CH-B 4 / Item 4.3 |
| 10 | Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BSR 2026 CH-B 4/ Item 4.13.3 |
| 11 | Supplying and fixing machine cut fine dressed Red/Pink sand stone dasa or coping, with full moulding if required laid on cement mortar 1:4 including pointing with admixture of pigment matching with the stone shade. 50 mm thick PWD BSR 2026 CH-B 6 / Item 6.19.2 |
| 12 | Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Sand or other approved stone 25mm thick. PWD BSR 2026 CH-B 6 / Item 6.17.1 |
| 13 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 300mm x 450mm PWD BSR 2026 CH-B 7 / Item 7.21.2 |
| 14 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc.laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed PWD BSR 2026 CH-B 7/ Item 7.13 |
| 15 | Providing and fixing Marble stone flooring table rubbed, 15-18 mm thick over 20mm (Av.) thick base of CM 1:4 (1 cement : 4 coarse sand) jointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Rajnagar 1st quality/Ageria with light spots 1501 Cm2 to 3600 Cm2 Tiles PWD BSR 2026 CH-B 07/ Item 7.2.2/pg 83 |
| 16 | P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints. M.S. Sheet 20 S.W.G. PWD BSR 2026 CH-B -09/ Item 9.17 |
| 17 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required. |
| 18 | Window side Hung ( openable ) PWD BSR 2026 CH-B -09/ Item 9.19.3 |
| 19 | Ventilators top Hung ( openable ) PWD BSR 2026 CH-B -09/ Item 9.19.3 |
| 20 | Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance . PWD BSR 2026 CH-B -9 / Item 9.26 |
| 21 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. PWD BSR 2026 CH-B -9 / Item 9.27 Square bar size 10 mm |
| 22 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat ofapproved steel primer PWD BSR 2026 CH-B -9 / Item 9.5 Frame size 40X40X6 mm |
| 23 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 20 mm thick PWD BSR 2026 CH-B 12/ Item 12.2.2 |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). New work ( three or more coats ) PWD BSR 2026 CH-B 12/ Item 12.42 |
| 25 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including allscaffolding: Two or more coats on new work including prepration of base with primer Putty lippy complete in all respect. PWD BSR 2026 CH-B -12 / Item 12.40.1 |
| 26 | Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work PWD BSR 2026 CH-B 12/ Item 12.46.1 |
| 27 | Filling available excavated earth ( excluding rock) in trenches plinth side of foundation etc. in layer not exceeding 20 cm in depth consolidation each deposited layer by ramming and watering including lead upto 50 mts and with all lift. PWD BSR 2026 CH-B -1 / Item 1.25 |
| 28 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor PWD BSR 2026 CH-S-1 / Pg. 217 / Item 1.4 |
| 29 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Pillar Cock 15 mm nominal size PWD BSR 2026 CH-S-2 / Pg. 238 / Item 2.33.1 kitchen |
| 30 | Concealed stop cock 15 mm nominal size PWD BSR 2026 CH-S-2 / Pg. 238 / Item 2.33.9 kitchen |
| 31 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall Size 550 mm x 400 mm dia for counter top PWD BSR 2026 CH-S-1 / Item 1.36.8 kitchen |
| 32 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc.,complete of approved design: PWD BSR 2026 CH-S2,236/ Item 2.26.3 1000 litres capacity. Kitchen |
| 33 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 34 | 75 mm dia PWD BSR 2026 CH-S-3 / Pg. 247 / Item 3.16.2 kitchen |
| 35 | 110 mm dia PWD BSR 2026 CH-S-3 / Pg. 247 / Item 3.16.3 kitchen |
| 36 | P & F Square-mouth gully trap `A` grade (IS 651-1992 :marked) of approved make complete with C.I. grating, frame & Cover masonary chamber in C.M. 1:6, 100mm thick C.C. 1:5:10 base concrete, 40mm thick C.C.M-15 grade coping, 12mm thick cement plaster in CM 1:3 complete as per approved design & type Trap size 150 X 100mm, ferrow cement cover with frame, Internal Chamber size 300 X 300mm. PWD BSR 2026 CH-S-3 / Pg. 247 / Item 3.5.1 Rain water |
| 37 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : Gun-metal 15mm nominal bore PWD BSR 2026 CH-S-2 / Pg. 309 / Item 2.15.3 |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 20 mm nominal size PWD BSR 2026 CH-S-2 / Pg. 240 / Item 2.38.2 kitchen |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size PWD BSR 2026 CH-S-2 / Pg. 240 / Item 2.38.3 kitchen |
| 40 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr. Size 240 Cm. dia outside & 240 Cm. depth. PWD BSR 2026 CH-S-3 / Pg. 329 / Item 3.22.3 |
| 41 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 42 | Short point (up to 3 mtr.) PWD BSR ( ELE.)2025 CH-E-2 / Pg. 1 /tem 2.1.1 All |
| 43 | Medium point (up to 6 mtr.) PWD BSR ( ELE.)2025 CH-E-2 / Pg. 1 /tem 2.1.1 All |
| 44 | Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Aluminium cable confirming to IS :7098 P - I of 1.1 KV with H4- Grade electrolytic aluminium conductor confirming to IS 8130 of purity >99.6 %, round / flat strip armouring of cables, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing commissioning etc. as required of following size. 25.0 Sq. mm 3.5 core PWD BSR ( ELE.)2025 CH-E-11 / Pg. 1 / Item 11.2.5.3 All |
| 45 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanism , energy limiting of class 3 as per IEC, minimum phase termination capacity of 25 sq.mm., conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating, 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. Double pole MCB (With B / C curve tripping characteristics) |
| 46 | 6 A to 32 A rating PWD BSR ( ELE.)2025 CH-E-6 / Pg. 1 / Item 6.1.2.2 |
| 47 | 80 A rating PWD BSR ( ELE.)2025 CH-E-6 / Pg. 1 / Item 6.1.2.5 |
| 48 | Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/10) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-charge. PWD BSR 2026 CH-B 10 ,p.g. 109 / Item 10.24 Total slab area Room slab |
| 49 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces)excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required. 0.63 mm thick with zinc coating not less than 275 gm/m2 PWD BSR 2026 CH-B -10 / Item 10.1.3 Tin shed slab |
| 50 | Steel work in built up tubular trusses including cutting, hoisting ( height upto 10 m)fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished welded type tubes PWD BSR 2026 CH-B 9/ Item 9.3.1 Vertical Hollow pipe Vertical pipe Wt per metre Hollow pipe 65X65X 5 mm Horizantal Hollow pipe top Wt per metre Hollow pipe 49.50X49.50X4.5 mm |
| 51 | Providing and laying of paver block as per IS 15658 : 2006 (Indian standard for precast concrete block for pavingspecification) and IRC : SP:63-2004 (guidelines for the use of interlocking concrete block pavement) M-30, 60 mm thick to be used in non traffic areas like building premises, monument premises, land scapes, public gardens/ park, domestic drives, paths and patios, Embankment slopes, sand stabilization Area etc.( As per table 1 of IS 15658:2006 Category A Denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004 PWD BSR 2026 CH-B -11 / Item 11.38.1 Room varandha Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender