Tender For Renovationof Canteen And Lion Safari Ticket Room Building Range Biopark Sajjangarh
Tender Value
12.46 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
9 days left
EMD
24920
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Udaipur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovationof Canteen And Lion Safari Ticket Room Building Range Biopark Sajjangarh
BOQ
| Sl. No. | Item Description |
| 1 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains not exceeding 1.5 m in width or 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed with a lead in a 50 meter including stacking of useful material if available : Ordinary Rock PWD BRS 2026 CH-B 1/ Item 1.9.1 Drain at Wolf Tank for room |
| 2 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding the cost of Centering and shuttering - All work up to plinth Level: M-10 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BRS 2026 CH-B3/ Item 3.1.4 Drain at Wolf Tank for room |
| 3 | Random rubble Stone masonary for foundation and plinth in cement sand mortar above 30 cm thick wall in : cement mortar 1:6 (1 cement : 6 coarse sand) PWD BRS 2026 CH-B6/ Item 6.1.6 |
| 4 | Add extra over item no. 5.1 for Brick work in super structure upto third storey using brick of class designation 75 in . cement mortar 1:6 (1 cement : 6 coarse sand) PWD BRS 2026 CH-B5/ Item 5.15.2 Lion Safari Room |
| 5 | Brick work in partition in super structure upto third storey 7 cm thick ( bick on edge ) using brick of class designation 75 in . cement mortar 1:4 (1 cement : 4 coarse sand) PWD BRS 2026 CH-B5/ Item 5.8.2 Drain at Wolf Room parapet |
| 6 | Random rubble dry stone Kharanja under floor. PWD BSR 2026 CH-B -11 / Item 11.26 Drain at Wolf |
| 7 | Providing and laying in position cement concrete includingcuring, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth Level: M-15 grade Nominal Mix ( with graded stone aggregate 20mm nomial size ) PWD BRS 2026 CH-B3/ Item 3.1.2 floor Tank Parking cateen |
| 8 | Suspended floors, roofs, landings, staircase, balconies, girders, cantilevers, bands, copingbed plates, anchor blockes,sills, chhajjas, lintel, beams etc. PWD BRS 2026 CH-B 4/ Item 4.10.2 For tank Room slab lintel chajja |
| 9 | providing and laying in position specified grade of cement concrete for RCC structure elements upto floor three level including curing compaction etc. complete in retaining walls,returnwall, Wall ( any thickness ) including attached pilasters , column,piers, abutments,,pillers, posts,buttresses string Course ,parapet coping bed plates, anchor blockes,sills, fillets up to floor three level excluding the cost of centreing and shuttering . M 20 grade mix PWD BRS 2026 CH-B 4 / Item 4.3 For tank slab lintel chajja |
| 10 | Providing and fabricating reinforcement for RCC work including straightening , cutting, bending, placing in position in binding (including cost of binding wire) all complete up to floor three level Thermo mechanically treated bars (IS:1786) PWD BRS 2026 CH-B 4/ Item 4.13.3 |
| 11 | Providing & laying broken glazed titles on roof ( broken glazed tiles not less than 9 Kg/Sqm) on top of hot bitumen @ 1.7 Kg/Sqm. (1.40 Kg of VG-40 (30/40 )grade and 0.30 Kg/Sqm. Of VG-10 (80/10) grade) and joints filled with cement mortar 1 :2 (1 cement:2 marble dust mixed with water proofing compund all complete as per direction of Engineerin-charge. PWD BRS 2026 CH-B 10 ,p.g. 157 / Item 10.24 |
| 12 | Providing and fixing 1st quality MAT & GLOSSY finished ceramic tile confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, lightblue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). Size 300mm x 450mm PWD BRS 2026 CH-B 7 / Item 7.21.2 |
| 13 | Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green,light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed PWD BRS 2026 CH-B 7/ Item 7.13 |
| 14 | Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cementmortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. South Zed Black (Above 3601 Cm2 Slabs) PWD BRS 2026 CH-B 7/ Item 7.5.3 (iii) |
| 15 | Polished Blue Kota stone flooring skirthing laid over 20mm thick base of CM 1:4 and jointed with grey cement slurry to match the shade of the slab including rubbing and polishing complete. For area of each slab from 2001sqm to 5000 sqm 25 mm thick slab PWD BRS 2026 CH-B 11/ Item 11.18.2 |
| 16 | P/ F M.S. sheet Single leaf door shutter in angle iron frame 35X35X5 mm suitabilly daigonally bracked with 25X3 mm flat iron above and below lock rail of size 50X5 mm beading extra including all fitting as per direction of engineer-in- charge but excluding cpst of chowkhats inculding twocoats of anti-corrosive red oxide primer paints. M.S. Sheet 20 S.W.G. PWD BRS 2026 CH-B -09/ Item 9.17 |
| 17 | Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts asrequired including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required. |
| 18 | Window side Hung ( openable ) PWD BRS 2026 CH-B -09/ Item 9.19.3 |
| 19 | Ventilators top Hung ( openable ) PWD BRS 2026 CH-B -09/ Item 9.19.3 |
| 20 | Supplying & fixing fixed wige gauge of 14 mesh X 24 gauge to the metal frame of rolled section by metal beading 20X3 mm with suitable screw at not exceeding 150mm distance . PWD BRS 2026 CH-B -9 / Item 9.26 |
| 21 | Providing and fixing Square bars or other flat welded to window, ventilatiors etc. PWD BRS 2026 CH-B -9 / Item 9.27 |
| 22 | Plaster on new surface on wall in cement sand mortar 1:4 including raking of joints etc complete fine finish : 20 mm thick PWD BRS 2026 CH-B 12/ Item 12.2.2 |
| 23 | Finishing with neat cement ( punning ) PWD BRS 2026 CH-B 12/ Item 12.7 |
| 24 | Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). New work ( three or more coats ) PWD BRS 2026 CH-B 12/ Item 12.42 |
| 25 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including allscaffolding: Two or more coats on new work including prepration of base with primer Putty lippy complete in all respect. PWD BRS 2026 CH-B -12 / Item 12.40.1 |
| 26 | Painting with emamel paint of approved brand and manufacture and to give an even shade . Two or more coats on New work PWD BRS 2026 CH-B 12/ Item 12.46.1 |
| 27 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: PWD BRS 2026 CH-S2,236/ Item 2.26.5 1000 litres capacity. |
| 28 | Providing and fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture as per direction of Engineer-in-charge of size 595 X 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.33 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X32mm made out of 0.33mm (Minimum) sheet, 1200mm long spaced between main ‘T’ at 600mm centre to centre to form a grid of 1200X600mm and secondary cross ’T’ of length 600mm and size 24X32mm made out of 0.33 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick (minimum) sheet with the help of rawl plugs at Sqm 1815.00 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick densified edged calcium silicate ceiling tiles of approved texture in the grid including cutting /making opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using 50 mm long M 6 dash fasteners, 6mm G.I. fully threaded rods with galvnised steel L cleat level adjusters of size 80x25x2mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with24mm of all T-sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawing and as directed by engineer-incharge. Two or more coats on New work PWD BRS 2026 CH-B 10/ Item 10.34 |
| 29 | P & F European type white glazed vitreous china 1st quality Double syphonic W.C (IS :2556 Mark) with P or S trap including cutting and making good the wall and floor PWD BRS 2026 CH-S-1 / Pg. 217 / Item 1.4 |
| 30 | Add extra over item No. 1.1 to 1.7, 1.14, 1.15, 1.19, 1.22 ,1.23,1.38 & 1.42 for using approved light coloured vitreous china ware i.e.ivory champagne , perl , soft green , soft blue,pink, ,light grey etc. instead of white vitreous chinawares. PWD BRS 2026 CH-S-1 Note (A) After 1.6 |
| 31 | P & F water closet Seat Covers with brass hinges complete Solid PVC (IS 2548 marked) grade-I coloured for EWC. PWD BRS 2026 CH-S-1 / Item 1.7.3 |
| 32 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (large) or half stall size 610x400x80mm PWD BRS 2026 CH-S-1 / Item 1.14.2 |
| 33 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge Pillar Cock 15 mm nominal size PWD BRS 2026 CH-S-2 / Pg. 238 / Item 2.33.1 |
| 34 | Concealed stop cock 15 mm nominal size PWD BRS 2026 CH-S-2 / Pg. 238 / Item 2.33.9 |
| 35 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. pillar cock (IS:8934 Mark) & 32 mm C.P. brass wastecoupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall Size 550 mm x 400 mm dia for counter top PWD BRS 2026 CH-S-1 / Item 1.36.8 |
| 36 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. |
| 37 | 75 mm dia PWD BRS 2026 CH-S-3 / Pg. 325 / Item 3.16.2 |
| 38 | 110 mm dia PWD BRS 2026 CH-S-3 / Pg. 325 / Item 3.16.3 |
| 39 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal size PWD BRS 2026 CH-S-2 / Pg. 240 / Item 2.38.1 |
| 40 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brassthreaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases andmaking good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 25 mm nominal size PWD BRS 2026 CH-S-2 / Pg. 240 / Item 2.38.3 |
| 41 | Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked ( IS:9537 P - II ) rigid steel conduit & it's ISI marked (IS:14768 P-II 2003) accessories, round tiles,Hot Dipped Galvanized Modular Box of 1.2 mm thick with earth terminal, 10A Modular switch,3 pin ceiling rose / holder / 3 way connector ,Modular face plate with grid plate, pvc bushes, check nuts, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with this BSR |
| 42 | Short point (up to 3 mtr.) PWD BRS ( ELE.)2025 CH-E-2 / Pg. 1 /tem 2..1.1 |
| 43 | Medium point (up to 6 mtr.) PWD BRS ( ELE.)2025 CH-E-2 / Pg. 1 /tem 2..1.2 |
| 44 | Providing & Fixing of of BLDC Technology ventilating fans , single phase with PVC impeller, ABS body, Double Ball bearing, automatic back lower shutter including making connection, testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR . 200 mm sweep with Min. Air delivery 800 cmh, 1600 RPM PWD BRS 2025 CH-E 15 / Item 15.5.2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender