Tender For Annual Rate Contract For Supply And Installation Of Submersible Pump Sets, Panels Cables And Other Allied Works And Connections With Existing System With 24 Months Defect Liability Period Under Jurisdiction Of Division Lakheri, Distt. Bund
Tender Value
75 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bundi → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Rate Contract For Supply And Installation Of Submersible Pump Sets, Panels Cables And Other Allied Works And Connections With Existing System With 24 Months Defect Liability Period Under Jurisdiction Of Division Lakheri, Distt. Bundi
BOQ
| Sl. No. | Item Description |
| 1 | Supply & Installation of 3 phase ISI marked submersible motor pump set of three star or better rating of BEE and as per IS: 8034-2018 (pump) and IS 9283- 2013 (motor) or as amended up to date of approved make of following duty condition with required accessories including making connection suitable for tube well/DCB. The job includes lowering of motor pump, installation of complete fitting & accessories, jointing of electrical cables up to switch board, testing of submersible pump set and interconnection up to water mains, complete in all respect. Rate in Exclusive of GST |
| 2 | Up to 5.5 KW (7.5 HP) & head up to 120 mtr. |
| 3 | Up to 5.5 KW (7.5 HP) & head above 120 mtr. |
| 4 | 7.5 KW (10 HP) & head up to 120 mtr. |
| 5 | 7.5 KW (10 HP) & head above 120 mtr. |
| 6 | 9.3 KW (12.5 HP) & head up to 120 mtr. |
| 7 | 9.3 KW (12.5 HP) & head above 120 mtr. |
| 8 | 11 KW (15 HP) & head up to 120 mtr. |
| 9 | 11 KW (15 HP) & head above 120 mtr. |
| 10 | 13 KW (17.5 HP) & head up to 120 mtr. |
| 11 | 13 KW (17.5 HP) & head above 120 mtr. |
| 12 | 15 KW (20 HP) and above, head up to 120 mtr. |
| 13 | 15 KW (20 HP) and above, head above 120 mtr. |
| 14 | Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB , fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter ( supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand ( made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg’s length 18\\" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Rate in Exclusive of GST |
| 15 | Above 5 HP and up to 10 HP |
| 16 | Above 10 HP and up to 15 HP |
| 17 | Above 15 HP and up to 20 HP |
| 18 | Above 20 HP and up to 30 HP |
| 19 | Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. Rate in Exclusive of GST |
| 20 | 3 core 4.0 Sq.mm |
| 21 | 3 core 6.0 Sq.mm |
| 22 | 3 core 10.0 Sq.mm |
| 23 | 3 core 16.0 Sq.mm |
| 24 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. Rate in Exclusive of GST |
| 25 | 10.0 Sq.mm, 4 core |
| 26 | 16.0 Sq.mm, 4 core |
| 27 | 25.0 Sq.mm, 3.5 core |
| 28 | 35.0 Sq.mm, 3.5 core |
| 29 | Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. Rate in Exclusive of GST |
| 30 | Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. Rate in Exclusive of GST |
| 31 | Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2\\" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug Rate in Exclusive of GST |
| 32 | 125 mm dia |
| 33 | 150 mm dia |
| 34 | 200 mm dia |
| 35 | Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B\\" class), Steel tube as per IS:1239 or amended up to date and zinc coating as per IS 4736, threaded and double flanged (welded) on both ends and two number 25x3mm MS flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect Rate in Exclusive of GST |
| 36 | 32 mm dia |
| 37 | 50 mm dia |
| 38 | 65 mm dia |
| 39 | 80mm dia |
| 40 | Providing & Fixing of double flanged, CI body, ISI marked NRV of approved make of following sizes Rate in Exclusive of GST |
| 41 | 65 mm dia |
| 42 | 80 mm dia |
| 43 | Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per specification with safety cover. Rate in Exclusive of GST |
| 44 | Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rate in Exclusive of GST |
| 45 | Manually Operated CI Sluice valve of Class PN-1.0 |
| 46 | 80 mm HW |
| 47 | 100 mm HW |
| 48 | 125 mm HW |
| 49 | 150 mm HW |
| 50 | 200 mm HW |
| 51 | Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2- 1985 and subsequent revisions, Wedge of same material as body & shall vulcanised rubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367 (Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitable support structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-incharge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Rate in Exclusive of GST |
| 52 | Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 |
| 53 | 80 mm dia |
| 54 | 100 mm dia |
| 55 | 125 mm dia |
| 56 | 150 mm dia |
| 57 | 200 mm dia |
| 58 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge. Rate in Exclusive of GST |
| 59 | MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) sheet) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender