Tender For Providing Installation Testing And Commissioning And Handing Over Of Water Based Fire Fighting System To The Construction Of New Govt. High School In Chandigarh Armed Police Complex At Dhanas U.T., Chandigarh.
Tender Value
20.99 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
4 days left
EMD
41991
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Installation Testing And Commissioning And Handing Over Of Water Based Fire Fighting System To The Construction Of New Govt. High School In Chandigarh Armed Police Complex At Dhanas U.T., Chandigarh.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : .2.10 |
| 2 | All kinds of soil .2.10.1 |
| 3 | Pipes, cables etc, not exceeding 80 mm dia .2.10.1.1 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: .6.1 |
| 5 | Cement mortar 1:6 (1 cement : 6 coarse sand) .6.1.2 |
| 6 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required .10.25 |
| 7 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works .10.25.2 |
| 8 | 12 mm cement plaster finished with a floating coat of neat cement of mix : .13.7 |
| 9 | 1:4 (1 cement: 4 fine sand) .13.7.2 |
| 10 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall .18.10 |
| 11 | 50 mm dia nominal bore .18.10.6 |
| 12 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work .18.12 |
| 13 | 50 mm dia nominal bore .18.12.6 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality screwed end) : .18.17 |
| 15 | 50 mm nominal bore. .18.17.4 |
| 16 | Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : .18.2 |
| 17 | 25 mm nominal bore .18.20.3 |
| 18 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : .18.46 |
| 19 | 50 mm nominal bore .18.46.6 |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. .18.48 |
| 21 | (a) Supplying, installation, testing andcommissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)(b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required.(c)Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class 'F' insulation, conforming to IS-12615: 2018.(d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.(e) Suitable cement concrete foundation dulyplastered and with anti vibration pads. .(E&M 2025)27.4 |
| 22 | 900 lpm at 35 m Head .27.4.1 |
| 23 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : .27.7 |
| 24 | 25 mm dia .27.7.1 |
| 25 | 80 mm dia .27.7.6 |
| 26 | 100 mm dia .27.7.7 |
| 27 | Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : .27.1 |
| 28 | Single headed Stainless steel .27.10.2 |
| 29 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : .27.11 |
| 30 | 80 mm dia .27.11.4 |
| 31 | 100 mm dia .27.11.5 |
| 32 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : .27.14 |
| 33 | 80 mm dia .27.14.4 |
| 34 | 100 mm dia .27.14.5 |
| 35 | Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : .27.16 |
| 36 | Stainless Steel (Grade 304) .27.16.2 |
| 37 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. (a) 20 mm nominal internal dia water hosethermoplastic (Textile reinforced) type -2 as per IS:12585(b) 20 mm nominal internal dia gun metal globe valve & nozzle.(c) Drum and brackets for fixing the equipmets on wall.(d)Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. .27.17 |
| 38 | 40 m .27.17.2 |
| 39 | Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: .27.18 |
| 40 | Stainless Steel (Grade 304) .27.18.2 |
| 41 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: .27.19 |
| 42 | 2 way-100 mm dia M.S. Pipe .27.19.1 |
| 43 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. .27.20 |
| 44 | Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. .27.22 |
| 45 | Terrace pump control panelSupply, installation, testing and commissioning of Electrical control panel for Terrace pump with 1.6mm thick sheet with powder coating, etc. complete in all respect as per direction of EIC. .NSR |
| 46 | a) incomer - 125 A TPN MCCB - 1 No with 125 A TPN cu Busbars- set - 1 no . |
| 47 | b) indication lamp- 1 set . |
| 48 | c) outgoing - 63 A TPN MCCB - 1 NOS . |
| 49 | d) star delta starter with internal wiring, power contactor , over load relay, timer, etc of suitable capacity. . |
| 50 | Supplying, installation, testing and commissioning of weather proof M.S cabinet size 610 mm x 450 mm x 250 mm deep fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate the following: - .NSR |
| 51 | SS single headed Hydrant valve - 1 No. . |
| 52 | Fire Hoses 63mm, 15 M long with accessories - 1 Nos. . |
| 53 | Short branch - 1 No. . |
| 54 | The cabinet shall be painted with one coat of primer and 2 coats of synthetic enamel paint of approved shade. . |
| 55 | Providing and fixing of Stored Pressure (ABC Dry Chemical Powder ) type Fire Extinguisher of Capacity 6 kg Confirms to IS 15683, bearing ISI mark complete with brass forged squeeze grip type valve fitted with pressure gauge , pressurize with dry Nitrogen gas filled, with discharge nozzle with wall mounting bracket, having fire rating of 2A & 21B. Make:- Padmini/SAFEX/MINIMAX. .NSR |
| 56 | Providing and fixing of CO2 type Fire Extinguisher of capacity 6kg confirming to IS 15683 duly bearing ISI mark, consisting of High Pressure (IS 7285) and duly approved by Chief controller of Explosive Nagpur, fitted with wheel type valve, fully charged with CO2 gas (IS 15222), with non-conductor of electricity discharge PVC horn along with Bend Pipe, internally siphon tube, & mounting brackets having fire rating as required to the entire satisfaction of EIC . Make:- safex/minimex .NSR |
| 57 | Providing and fixing of Photo Illuminscent Fire duct board of suitable (12 inch X 6 inch) size as required to the entire satisfaction of EIC .NSR |
| 58 | Supplying, installing, teesting and commissioning of Armoured Copper cable of Make: Havells/ Finolex/ ICL/ Gloster/Grandley. .NSR |
| 59 | 2C x 4 Sqmm from panel to pressure switch . |
| 60 | 3C x 4 Sqmm from panel to motor . |
| 61 | 4C x 6 Sqmm from main to panel . |
| 62 | Cutting hole core cutting by mechnical complete in all respect. 5\\" Dia .NSR Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender