Tender For Special Repairs To Sanitary Arrangements In Auditorium Toilet And Wall Paintings In Auditorium In Government Polytechnic College At Perundurai.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
2000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Erode → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Sanitary Arrangements In Auditorium Toilet And Wall Paintings In Auditorium In Government Polytechnic College At Perundurai.
BOQ
| Sl. No. | Item Description |
| 1 | Clean removal of Cement plaster from walls etc, complete as directed by the departmental officers. |
| 2 | Clean removal of Cement plaster from walls etc, complete as directed by the departmental officers. |
| 3 | Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab. staircase waist slab, landing slab etc.. with Cement Mortar 1:3 (One Cement and Three Plastering Sand) 10mm thick including mortar plasticizer at 200ml per 50Kg of cement used, hacking the surfaces and curing, etc., in all floors complying with standard specification and as directed by the departmental officers |
| 4 | Painting the wall two coats with approved weather proof Exterior Emulsion paint over one primer coat on cement plastered wall surface ect.. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Flooring with ceramic tiles of following size and variety conforming to IS 15622 laid over cement mortar bed of 20 mm thick in cement mortar 1:3 (One Cement and Three crushed stone Sand) with required Cement Slurry and Mortar Plasticizer including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with Water Resistant Tile Epoxy Grout at the rate of 0.27 Kg./sq.m. etc. complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 6 | Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with \\"P\\" or \\"S\\" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One) lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia Cl pipe for a length of 600mm) by dismantling brick masonry wall reinforced cement concrete roof floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers (The water closet should be got approved by the Executive Engineer before use on works). |
| 7 | Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap. 32mm dia \\"B\\" class Gl waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using Cl brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers.(The wash hand basin and specials should be got approved by the Executive Engineer before use on works) |
| 8 | Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 9 | Supplying, laying and joining UPVC pipes of approved quality and best veriety conforming to ISS with ISI mark, of the the following size above Ground level up to 4 M hight laid properly to alignment including cutting. threading and fixing the required UPVC specials but excluding the cost of such specials and fixing to the wall with necessary TW plugs. clamps and screws. making holes on the wall or drilling holes in the roof and making good dismantled portion to original condition with necessary brick work, concrete and plastering wherever necessary with necessary scaffolding charges etc., complete. |
| 10 | 32mm UPVC Pipe |
| 11 | Supplying UPVC Specials (with working pressure 15 kg./sq.cm.) in water supply arrangements (both in internal and external water supply arrangements. Since the labour for cutting, threading/pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed etc., complete complying with standard specification |
| 12 | 32 mm UPVC Elbow |
| 13 | 32 mm UPVC Tee |
| 14 | 20 mm x 15mm UPVC Reducer |
| 15 | Supply and fixing in position best quality PVC Soil/waste pipes 6 kg/sqcm of various size (Above Ground Level) having ISI mark and providing leak proof joints including fixing to the wall with special PVC /MS clamps, etc., and making connection to all sanitory fittings, dismantling masontry / RCC works wherever necessary and making good the dismantled portion to the original condition, complying with standard specification etc., complete. |
| 16 | 110 mm PVC Pipe |
| 17 | 75 mm PVC Pipe |
| 18 | Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc. complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works). |
| 19 | 110 mm PVC Elbow |
| 20 | 110 mm PVC Tee |
| 21 | 110 mm Air Cowl |
| 22 | 75 mm PVC Elbow |
| 23 | 75 mm PVC Air vent |
| 24 | Supplying and fixing position PVC Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2.5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement. Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. |
| 25 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand) using best quality of Clay burnt Bricks of size 9\\" x 43/8\\" x 23/4\\" with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate) 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification. |
| 26 | Chamber 600mm x 600mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender