Drinking Water Supply and Sanitation Local Bodies Closing in 2 days TDR #58362271

Tender For Improvement Works To The Voc Nagar And Jj Nagar Icds Buildings In Ward No.35, West Zone. Roc No.1542/2026/Md2

Issued by Local Bodies · Coimbatore, Tamil Nadu
Tender Value
15 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
2 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Improvement Works To The Voc Nagar And Jj Nagar Icds Buildings In Ward No.35, West Zone. Roc No.1542/2026/Md2

BOQ

Name of Work:- Improvement Works to the VOC Nagar and JJ Nagar ICDS Buildings in Ward No.35, West Zone. ROC No.1542/2026/MD2
Sl. No. Item Description
1Providing cast in situ cement concrete 1: 11/2 : 3 (one cement, one and half M.Sand and three coarse aggregate) using 20mm size HBBG metal for 30cm dia pile including cost of materials labour, hire charges for machinery for earth work for forming 30cm dia bore hole to the required depth before concreting excluding cost of steel reinforcement
2Dismantling plain cement concrete including all labour Charges as per the Direction of the Departmental officers Etc., Complete.
3Earth work excavation and depositing on bank within initial lead of 10M and initial lift of 2 metre in hard stiff clay stiff black hard red earth shales murums, gravel stoney earth and earth mixed with small size boulders and hard gravelly soil, etc., complete complying with standard specification.
4Filling Pallam sand for basement 15 cm thick including cost and conveyance of all materials and labour charges etc. complete.
5CEMENT CONCRETE 1:4:8 (One cement, four sand and eight aggregate) using 40mm gauge hand broken hard granite stone jelly for FOUNDATION including dewatering if found necessary and laid in layers of not more than 15cm thick, well rammed etc., complete complying with standard specification.
6Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm * 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard specfication and as directed.
7R.C.C. 1:1.5:3 Mix (One cement one point sand Three hard broken granite stones) for all the reinforced cement concrete works using 20mm gauge hard blue granite stone jelly including cost and conveyance of all materials to site including all labour charges for concrete mixing, laying, watering curing properly excluding cost of steel and centering etc., complete complying with standard specification.
8Supply fabrication and placing imposition of mild steel for steel rod of various sizes as directed including all labour charges for cutting and binding and tying with cost of binding wire, etc., complete as per standard specification.
9Fly ash Brick work in CM 1:5 (one cement & five sand) using size 9\\"X4 3/8\\"X 2 3/4\\" including finishing, curing, etc., complete complying with standard specification -
10Fillling with well gravel layers of not more than 30cm thick,well rammed, watered and compacted, complying with standard specification etc., complete.
11Ceiling Plastering with C.M. 1:3 Mix (one cement and three sand) 10mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.
12Plastering with C.M. 1:5 Mix (one cement and five sand) 12mm thick finishing including cost and conveyance of all materials to site and all labour charges, watering curing and all other incidental charges etc., complete complying with standard specification.
13Flooring Ceramic (No sand to be used) using with 6mm chips C.M.1:2 mix using 20mm thick including cost of materials to work site and all other labour charges
14Solid PVC door shutter using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for paneling shall rigidly fix in position including necessary furniture and fittings. The cover all size of top rail, Lock rail and bottom rail shall be 70mm x 45mm, with suitable rebate for housing the shutter
15Daddoing the walls with first quality approved colour Glazed tiles of size 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete
16Supplying and fixing in position of Indian make colour water closet of size in 580mm * 440mm weight glassed earthan ware of approved with P Trap (or) S Trap and foot rest and filling all round the closet using 20mm broken brick jally in 10cm thick and plaster in c.m. 1:3 12 mm thick including fixing in position leveling complete with necessary connection as per standard specification
17WEATHERING COURSE CONCRETE using best quality broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be added) over the RCC roof slabs in the proportion of brick jelly to lime being 32:12.5 by volume and laid in a single layer and consolidated to the required designed and finished thickness by beating the concrete with wooden beaters of approved pattern keeping the surface constantly wet by sprinkling lime jiggery water as per standard specification etc., complete as directed by the departmental officers.
18Supply and fixing of mild steel door using all round \\"L\\" angle 25 X 25 X 6mm thick, cross bracing 20 X 6mm M.S.Flat with necessary locking arrangements including cost and conveyance etc., Size : 0.60 X 1.85
19Painting with plastic emulsion paint two coats over base coat for new plastered surface for using best quality and aproved colour of oil bound distemper conforming to ISI specification etc., complete complying as directed by the departmental officers as per standard specification.
20Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V)32A neutral link and earth link (1\\" x 1/8\\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit.
21Wiring with 2 x 1.5 sqmm (22 / 0.3) PVC insulated SC sheathed Cu. Conductor of 1100V grade in suitable PVC rigid pipe cealed in wall and ceiling with PVC accessories in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For electronic regulator).
22wiring with 2x1.5sq mm (22/.3) PVC insulated SC unsheathed copper conductore cable of 1100V Grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories in flush with wall with 150mmx100mmx75mm MS switch box with 3mm thick hylem sheet cover for 5A 3pin interlocking CS Plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed Plug point. (SD 12)
23Supply and run of 2 of 4 sq.m (56/0.3)PVC insulated SC unsheathed CU.Conductor of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.(SD 44)
24Supply and fixing of 22 watts LED Tube Light Fittings complete with copper choke and condensor with TW round blocks on wall or ceiling with LED tube with PVC unsheathed copper leads from terminals to the fitting including all cost etc complete.
25Supply and fixing of single box type 4\\"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube (SD 87)
26Supplying and fixing of 1200mm(48\\")sweep AC ceiling fan complete with stepped electronic 300W Regulator with 1 metre down rod with fan clamp with side plates and crpss arm of size 450mm(16\\") (SD 106)
27Supplying and fixing of 15 A aerial fuse unit (500A)on suitable 100x100 mm TW concealed box with iron sheet on the tapping pole with necessary clamps.(SD 128)
28Providing flooring with rubber mould interlocking concrete block flooring over sand cushion including ramming before and after laying of concrete block in200kg/cm2 of compressive strenth as per the direction of the dept off etc., complete.
29supplying and fixing of HDPE Water Tanks with suitable specials including cost of materials to site and all other labour charges.etc
30S/F OF CUDAPPA SLAB of approved quality and colour of size all floors over 40mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.
31Providing side scutting with GRANITE tiles 100mm Height of approved quality and colour of size all floors over 20mm thick cement mortar 1:3 (One cement and three sand) base above the existing bed concrete and pointed with same color cement added.
32Supply and Fixing in position of Indian make White glazed earthware WASH BASIN 550mmx400mm with all accessories such as costIron brackets , 32mm dia C.P waste coupling 15mm dia G.M wheel valve ,15mm dia Nylon connection , 15mm dia Brass Nipples, 15mm C.P Pillar tap etc., complete.
33Supply and Fixing of 48W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete.
34Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride)Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the hutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, securityprotective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work
35Fillling with M- sand layer by layer not more than 30cm thick,well rammed, watered and compacted, complying with standard specification etc., complete.
36Supply and Fixing of 1HP Motor with pumpset as per Standard Quality as per the Direction of the Departmental officers etc., complete.
37S/fixing of slide ladder park model using 16g MS sheet for sliding 8'-0\\" support pipe 40mm dia MS pipe 10 swg 3.25 mm wall thick ladder using 25mm L angle for sliding support hand rails using 25mm sq.rod and platform frame using 40mm L angle with one coat of primer and two coat of enamel paintinf etc
38S/F of twin sea saw two seater of 6'-0\\" length and 4'-0\\" height using 50mm G.I. pipe with two coats of enamel paint over one coat of primer and platform using 1\\" paddale wood with polish as per direction of departmental officers.
39Supply and fixing of park benches using M.S pipe plates as per the direction of Dept. off., Etc complete
40Removal of Excavated Excess Earth away from the site to 5K.M including loading and transportation charges etc, complete as per standard specification. For 1M3 Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58362271
AUTHORITY Local Bodies
TENDER VALUE 15 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Municipal Adminitration And Water Supply Department
Work Description Tender for Improvement Works To The Voc Nagar And Jj Nagar Icds Buildings In Ward No.35, West Zone. Roc No.1542/2026/Md2
Basic Detail
Tender No e84/2026-Retender
Bidding Type Tender
Location
City Coimbatore
State Tamil Nadu
Key Dates
Publish Date 03 Nov 2026
Submission Date 19 Nov 2026
Open Date 20 Nov 2026
Finance
Tender Value 15 Lakhs
Tender Fee Ref. Documents
EMD 15000
Exemption Not Available
Document List
BOQ_865990.xls
ed5276d1-e744-46b3-852b-0ca24ab03283.html
ITB.pdf
SingleCover.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 2 days
Nov 20, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 3 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_865990.xls

html

ed5276d1-e744-46b3-852b-0ca24ab03283.html

pdf

ITB.pdf

pdf

SingleCover.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender