Housing Urban and Rular Development Government Departments Closing in 5 days TDR #58362259

Tender For Provision Of Construction Of Office Building Of Assistant Labour Officer At Digapahandi, Dist Ganjam Buildings.

Issued by Government Departments · Ganjam, Odisha
Tender Value
1.52 Crore
Estimated cost
Bid Submission
24 Nov 2026
5 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of Construction Of Office Building Of Assistant Labour Officer At Digapahandi, Dist Ganjam Buildings.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Nov-2026 Change of Date Date 24-Nov-2026

BOQ

Name of Work:- Provision of construction of office building of Assistant Labour officer at Digapahandi, Dist Ganjam Buildings.
Sl. No. Item Description
1Earth work in excavation in hard soil within 50 m linital lead and 1.50m initial lift including rough dressing breaking clods to maxikum 5cm to 7cm and laying in layers not exceeding 0.3M depth and as per OPWD Specification and direction of the Engineer-In-Charge.
2Filling in foundation and plinth with excavated earth including watering and ramming as per OPWD Specification and direction of the Engineer-In-Charge.
3Filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalty, taxes of all materials with all labour, T&P etc., complete as per the OPWD Specification and direction of the Engineer-in-charge.
4Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the OPWD Specification and direction of the Engineer-in-charge.
5Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge.. But excluding cost and conveyance of HYSD bar and binding wires and labour charges for straightening, cutting, bending etc. of HYSD Bar tying the grills and placing in proper position. - Column Base
6Plinth Beam
7Column S/s and Roof Beam - Ground Floor
8First Floor
9Head Room
10Lintel - Ground Floor
11First Floor
12Head Room
13Chajja - Ground Floor
14First Floor
15Shelves - Ground Floor
16Roof Slab - Ground Floor
17First Floor
18Head Room
19Stair Case - Ground Floor
20First Floor
21Supplying cutting, bending, binding & straightening coiled or bent up HYSD Bar of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of HYSD Bar and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for HYSD Bar only) etc. complete as per OPWD specification & direction of Engineer-in-charge.. Ground Floor
22First Floor
23Second Floor
24Cement concrete of proportion (1:2:4) in F&P using 12mm size cb/hb chips of approved quality including cost, conveyance, taxes & royalty of all materials and labour with T&P etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
25Fly Ash Brick masonry in C.M. (1:6) using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Foundation & Plinth
26Super Structure - Ground Floor
27First Floor
28Head Room
29Fly Ash Brick masonry in C.M. (1:4) Superstructure using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
30First Floor
31Providing 12 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
32First Floor
33Providing 12 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
34First floor
35Head room
36Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
37First floor
38Head Room
39Providing 6 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth over RCC surface in all heights including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
40First floor
41Head Room
42Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, Steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all labour, materials & T&P, sundries etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge.
43Synthetic Enamel painting two coats over a coat of primer to Iron work including cost of all materials and labour with T&P etc complete in all respect as per OPWD specification & direction of Engineer-in-charge- Ground Floor
44First floor
45Head Room
46Supplying, fitting, fixing of polished Vitrified floor tiles in Floor of premium grade having thickness (8mm to 10 mm) confirming to IS 15622:2006 (Group-B la) of 600mmx600mm plain (ivory) laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per OPWD specicication & the direction of the Engineer-in-charge.(Note- Sample of tiles shall be approved before procurement and use.) Make:Somany/ Jhonson/ Kajaria) - Ground Floor
47First floor
48Supplying, fitting, fixing of Industrial Vitrified floor tiles in Floor of premium grade having thickness 8mm to 10 mm confirming to IS 4457 of 300mmx300mm laid on 20mm thick bed of cement mortar (1:4) and filling jointed with white cement of approved quality including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per OPWD specification & direction of the Engineer-in-charge (Note- Sample of tiles shall be approved before procurement and use.)- Ground Floor
49Supplying, fitting, fixing of polished Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of 600mmx600mm plain (ivory) in Dados on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shades of tiles including cost, conveyance of all materials, cost of all labour, T&P etc. complete as OPWD specificaion per the direction of the Engineer-in-charge.(Note- Sample of tiles shall be approved before procurement and use.) Make:Somany/ Jhonson/ Kajaria)Ground Floor
50First floor
51Supplying, fitting, fixing of Granite tile of size above 0.10 Sqm and upto 0.4 sqm (10mm thick) laid on 20 mm thick Cement mortar (1:4) in Staircase steps and landing with jointed with neat cement slury mixed with pigment to match the shades of tiles including rubbing and polishing etc complete including cost, conveyance of all materials, cost of all labour, T&P etc. complete as per OPWD specification and direction of the Engineer-in-charge. (Note : Sample of granite tiles shall be approved before procurement and use)Ground Floor
52First floor
53Supplying,fitting and fixing of Stainless Steel of 304 grade in Hand Railing using 50mm dia of 2mm thick circular pipe with balustrade of size 32mmx32mmx2mm @ 0.90 mtr. C/C and sainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification,buffing, polishing etc. with cost,conveyance,taxes of all materials,Labour,T&P etc. required for the complete in all respect as per OPWD specification & direction of Engineer-in-charge. - All Floor
54Supply and fitting, fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality compete with frame, shutters and all fitting and fixtures,cost,conveyance,taxes of all materials,Labour,T&P etc. complete as per OPWD specification & direction of Engineer-in-charge.All floor
55Supply and fitting, fixing of un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA Ltd) Ventilator /TopHung - 60 Series duly manufactured using UPVC reinforced profiles of 60mmx55mmx2.5 mm for outer frames, 75mmx60mmx2.25mm for cashment window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanished upto 50 microns of minimum thickness of 1.5mm prefebricated and welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT - GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminum 1 No per set or sashed and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc, including cost and consveyance of all materials accessories labour charges, materialsn and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards as per OPWD specification & direction of Engineer-in-charge.
56Finishing to exterior wall surface with 2 (two) coats of weather coat of approved shade and approved make to give an even shade including cost of all material of all materials and labour with T&P etc. completeas per OPWD specification & direction of Engineer-in-charge. - Ground Floor
57First floor
58Head Room
59Finishing to interior wall surface with 2 (two) coats of Plastic Emulsion (P.E) Paint including cost of all material and labour with T&P etc. complete as per OPWD specification & direction of Engineer-in-charge - Ground Floor
60First Floor
61Head Room
62Priming one coat to the wall surface including cost of all materials and labour with T&P etc. complete as per OPWD specification & direction of Engineer-in-charge - Ground Floor
63First floor
64Head Room
65Providing & Fixinng factory made 100% Solid WPC (Wood Polymer Composite) - Door Frame 125 mm x 65 mm Single Rebated, made from Wood Polymer Composite (Single Extruded Process) material comparising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood Powder/Rice Husk/ Wheat Husk) and Non toxic additives fabricated with meter Joints after applying PVC solvent Cement & screwed with full bdy treaded star headed screws having minimum frame density of 780 kg/cbm & an ISO 9001-2015 Certified Company, having good screw holding capacity (Screw Withdrawal strength of (Min. 990 N), Minimum Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/Moisture Proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of reuired dia and lenght, all as per specifications drawings as directed by the Engineer-in-Charge. - Ground Floor & First Floor
66Finishing surface of walls with Cement base wall putty (water based) of approved make and finishing the surface smooth and even by sand papering to receive paint in walls, at all heights with staging for all floors wherever necessary with cost, conveyance, of all materials, cost of all labour, all T&P etc. required for the work complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor
67First floor
68Head Room
69Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures, labour etc. complete in all respect as per OPWD specification and direction of Engineer-in-Charge.
70Supplying and fixing of Double skin wall panneling made of aluminium anodised section framing to standard Aluminium sections as horinzotal and vertical members with atlest 600 mm c/c and fixing of 9mm thick BWR ply with 4mm thick veneer pasting , finished with melamine polishing, labour etc. complete in all respect as per OPWD specification and direction of Engineer-in-Charge.
71Supplying and fixing of grid mineral fiber ceilling board having size 600mm x 600mm x12mm of approved design and quality complete with frame and all fitting and fixture etc complete as per OPWD specification and direction of Engineer-in-Charge. - Ground Floor & First Floor
72Providing fixing and fitting of 110mm dia P.V.C. rain water pipe of approved quality and approved make confirming to I S with necessary bends and clamps etc.complete fixed to wall with nail etc as per the direction of Engineer in charge including cost of all material with taxes labour T&P etc complete.
73Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge.
7420mm thick grading plaster in cm (1:4) finished smooth to roof top including cost, conveyance, taxes, royalties, labour with T&P etc. complete in all respect as per the direction of Engineer-in-Charge Ground Floor
75First Floor
76Head Room
77Construction of Granular Sub-Base by providing Grading-VI material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge.
78Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M-40 grade made by block making machine with storng vibratory compaction of approved size, design & shape, laid in required colour and pattern as per drawing including all labour, transporting, T&P etc complete as per OPWD specification & direction of Engineer-in-charge.
79EI works : Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20mm dia non-metallic PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal with 6Amp ,250V Modular switch ISI marked and ceiling rose ISI marked mounted on Metal box having front Modular cover of suitable size, Metal box with 1.5sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire-Polycab/Finolex/L&T/Anchor/Havells/V-Guard) (Panasonic Akina/Roma Plus), legrand( Myrius-NEXT GEN),Havells-Group-A -L.P- 32 F.P- 12 C.B.P-
80Group-B L.P- 30 F.P- 8 C.B.P-
81Group-C L.P- 22 F.P- 10 C.B.P- 4
82Supply and fixing of 6Amp socket with 6Amp switch on existing board (Modular type )
83Supply and fixing of 16Amp plug with 16Amp switch on existing board (Modular type )
84Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch(3x5A+1x15A S-S) on Modular G.I. Box with Modular Base and cover(make-Havells/ Anchor/ Legrand /Roma/panasonic)
85Supply and fixing of 2 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch (2 nosX5A+1nosX15A S-S) on Modular G.I. Box with Modular Base and cover.(computer board) (make-Anchor/ Legrand /Roma/Havells/Panasonic)
86Recessed submain wiring alongwith earth wire with the following sizes of PVC insulated single core multistrand copper conductor ISI marked conforming to IS-694/1990 in 20mm dia non metallic heavy duty flexible conduit 1.6 mm in surface /recessed PVC conduit as required (make of wire -Polycab/Finolex/L&T/Anchor/Havells/V-Guard/)2 X 1.5sq.mm +1 X 1.5sqmm
872 X 2.5sq.mm +1 X 1.5sqmm
882 X 4sq.mm +1 X 1.5sqmm.
892 X 6sq.mm +1 X 2.5sqmm.
904X 10sq.mm + 2 X 4sqmm.
91Supply and drawing of following size PVC insulated single core multistrand copper conductor in existing surface/recessed/ steel /pvc conduit as required. - 2 x 1.5 sqmm (inverter)
92Supply and fixing of superior type call bell of ISI marked, on 6\\" X 4\\"conforming to IS-2268/1994 and bell push of ISI marked , conforming to IS-1293/ 1988 (make-Cona/ Anchor)Musical call bell with battery
93Supply and fixing of copper plate earthing( 600 X 600 X 3.15mm )with running copper flat 25 X 5mm from copper plate to funnel of 40mm dia G.I pipe including all accessories
94Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.
95Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
96S/L of 6 SWG G.I wire
97Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-Hager/Havells/Legrand/Anchor/schnider - 8 Way, Double door
9812way, Double door
99Supply and fixing of 5Amp to 32A rating 240V \\"B\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required. (make-Hager/Havells/Legrand/Anchor/schnider single poles MCB LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200Single pole (SP)
100Single pole and Neutral (SP&N)
101Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 240 volts, RCCB 30mA . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 3 years.
1024 Way(8+(4x3)+(3x4)) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-12 module & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years
103Supply and fixing of 9Watt LED lamp , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Philips/ Havells/ AnchorBajaj)
104Supply and fixing of 10 Watt LED BH Fitting ( Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj)The luminaire should be Replacement Warranty will be 2 years
105Supply and fixing of 10 watt Mirrior light with all connections. , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k(Make-Havels/Panasonic/ Philips/Bajaj/Crompton)
106S/F of 20W 4' LED fitting Surface LED Light fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Make-Havels/Panasonic/ Philips/Bajaj/Crompton
107Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: PANASONIC/Havells/WIPRO ,PHILIPS Eq.,)The luminaire should be Replacement Warranty will be 2 years
108S/F of 90W LED street light fitting , Lumens Efficacy minimum rating should meet :105 lumen per watt 6500k (Make-Havels/Panasonic/ Philips/Bajaj/Crompton)
109Supply and fixing of Geyser(6 ltr INSTANT GEYSER) 5-star BEE energy efficiency ratings, high-pressure resistance (often 8 bar), and advanced safety features including auto-cutoff and thermal cut-out make- Havells,RACOLD,Orient, Ao smith,Vgurd/Crompton
110Supply and fixing of fan (make-Usha/Orient/V-Guard/Khaitan/Havells/Crompton/Almonard/V-Guard)S/F of 1200mm Brush Less Direct Current BLDC Ceiling fan with Low wattage(28-30)consumption fan , Heavy Duty,durable, copper winding,Aluminium blade(ISI mark)Crompton Grave/Khaitan/Havells/Orient/Polycab/V-Guard
111Exhaust fan 300mm
112Supply of PVC/XLPE Aluminium armored cables ISI marked.(Make- GLOSTER/Havells/Anchor.50sqmm 3 1/2 core
113Cable laying on wall surface with steel shaddle 25sqmm to 120sqmm
114LT Indoor Panel S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing. (FOR ALL MAIN CONNECTED LOAD) BUILDING POWER)as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 5 years & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD shall be installed in the incomer. Separate Aluminium Earth bus bar should be installed.01 number of 200 Amps 4P MCCB 16KA ( Make-LEGRAND/ Siemens/ Schneider).Busbar- 04 numbers of 200Amps 50kA Electrolytic copper busbar duly sleeved by color coaded PVC sleeve & supported by suitable size DMC insulator. Out going- (i) 63A 4P MCB 04 NOS FOR AC BDB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) onload type Changeover-01 number of 200 Amps 4P ( Make-LEGRAND/ Siemens/ Schneider) Out going- (ii) 05 nos 40A 4P MCB FOR LIGHT BDB ( Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9) Instrument- (i) 3 numbers phase indicating lamp with 2A SP MCB,C,10KA.(ii) 01 set of MFM with RS-485 & CTS.(DIGITAL)(Sicure/L&T,CT-KAPPA or equievalant make & model) providing with Floor Rubber mat 3'X2'X6 mm
115Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU) i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. Additional Feature like indoor outdoor Blue Fin coated. 3 Star Non-Inverter Type - Cooling only (Category I Make :- Mitsubishi/ O General/ Daikin)2 TR with 3 Star BEE Rating (Mitsubishi-MS-AGZ24/ O General-ASGA24BMAA-B)
116Installation charges of AC machine ( indoor &Outdoor Unit )
117Supply and fixing of Stand for AC Machine
118S/F of Copper Pipe 5/8\\" to 1/4\\"
119S/F of 3 core wire for AC machine
120Recessed wiring for Gyser point with 16 AMP SOCKET and modular plate cover enclosure ,20A/32A SP MCB including all accesories and connection as per direction of Engineer-in-charge.
121S/F of Metal Clad Industrial Type Plug, Socket, Interlocked Switch Socket Unit & Distribution Board. Industrial Socket with 20Amp SP MCB for AC point. make- Havells/ polycab/legrand/schneide
122Supply of Invertor,UPS 2300VA Pure Shine wave (Make Microtech/Su-kam/Luminous/V guard)
123Supply of Invertor Battery 12V 160AH(Make Exide/Amrom/Su-kam/Luminous,V guard with 48 Month warranty)
124Supply of Invertor Stand(Make Microtech/Su-kam/Luminous/) Please Enable Macros to View BoQ information
125Supply of Invertor Stand(Make Microtech/Su-kam/Luminous/) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58362259
AUTHORITY Government Departments
TENDER VALUE 1.52 Crore
LAST DATE 24-11-2026
Authority
Authority Name Road And Building Department
Work Description Tender for Provision Of Construction Of Office Building Of Assistant Labour Officer At Digapahandi, Dist Ganjam Buildings.
Basic Detail
Tender No CCE, SC- R and B BAM 06/2026-27
Bidding Type Tender
Location
City Ganjam
State Odisha
Key Dates
Publish Date 19 Nov 2026
Submission Date 24 Nov 2026
Open Date 25 Nov 2026
Finance
Tender Value 1.52 Crore
Tender Fee 10000
EMD 1.52 Lakhs
Exemption Available
Document List
BOQ_617999.xls
d3a64675-e1e6-45cb-ac49-df5f50dd0c37.html
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Today
Nov 24, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 24, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 25, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
xls

BOQ_617999.xls

html

d3a64675-e1e6-45cb-ac49-df5f50dd0c37.html

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender