Tender For Construction Of Proposed Auditorium (500 Nos Capacity) At Kats Ayurvedic College At Ankushpur, Berhampur, Ganjam (Phase-I) As Per Letter No. 818 Dtd. 02.02.2024 Of Directorate Of Ayush, Odisha Buildings.
Tender Value
6.43 Crore
Estimated cost
Bid Submission
19 Nov 2026
14 days left
EMD
6.43 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ganjam → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Proposed Auditorium (500 Nos Capacity) At Kats Ayurvedic College At Ankushpur, Berhampur, Ganjam (Phase-I) As Per Letter No. 818 Dtd. 02.02.2024 Of Directorate Of Ayush, Odisha Buildings.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in hard soil within 50 m linital lead and 1.50m initial lift including rough dressing breaking clods to maxikum 5cm to 7cm and laying in layers not exceeding 0.3M depth and as per OPWD Specification and direction of the Engineer-In-Charge. |
| 2 | Filling in foundation and plinth with excavated earth including watering and ramming as per OPWD Specification and direction of the Engineer-In-Charge. |
| 3 | Filling in foundation and plinth with sand including watering and ramming with cost, conveyance, royalty, taxes of all materials with all labour, T&P etc., complete as per the OPWD Specification and direction of the Engineer-in-charge. |
| 4 | Providing and laying plain cement concrete of proportion (1:3:6) in foundation and floors using 4 cm. size black hard crusher broken granite stone metal and screened and washed sharp sand for mortar of approved quality and from approved quarry including hoisting, lowering, laying concrete, ramming, watering and curing etc. complete to required levels laid in layers not exceeding 15 cm. thick in each layer including cost, conveyance, royalties of all materials and cost of all labours,labour cess, T&P etc complete as per the OPWD Specification and direction of the Engineer-in-charge. |
| 5 | Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 %) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge.. But excluding cost and conveyance of HYSD bar and binding wires and labour charges for straightening, cutting, bending etc. of HYSD Bar tying the grills and placing in proper position. - Column Base |
| 6 | Plinth Beam |
| 7 | Column Shaft anf roof beam - Ground floor |
| 8 | First Floor |
| 9 | Second Floor |
| 10 | Third Floor |
| 11 | Lintel - Ground Floor |
| 12 | First Floor |
| 13 | Second Floor |
| 14 | Chajja - Ground Floor |
| 15 | First Floor |
| 16 | Second Floor |
| 17 | Roof Slab - Ground Floor |
| 18 | First Floor |
| 19 | Second Floor |
| 20 | Staircase - Ground Floor |
| 21 | First Floor |
| 22 | Second Floor |
| 23 | Supplying cutting, bending, binding & straightening coiled or bent up HYSD Bar of primary steel producers such as SAIL / Tiscon / RINL / JINDAL STEEL (grade Fe-500D) etc. including bending, binding, welding and jointing if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances of HYSD Bar and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors with labour cess etc. (payment will be made on standard weight of B.I.S. for HYSD Bar only) etc. complete as per OPWD specification & direction of Engineer-in-charge.. Ground Floor |
| 24 | First Floor |
| 25 | Second Floor |
| 26 | Fly Ash Brick masonry in C.M. (1:6) using of 23cmx11cmx8cm size brick having a crushing strength of not less than 75 kg per Sq.cm including splays, cuttings, circular moldings, watering & curing for 7 days, cost, conveyance, royalties of all materials, labour with T&P etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Foundation & Plinth |
| 27 | Super Structure - Ground Floor |
| 28 | First Floor |
| 29 | Second Floor |
| 30 | Third Floor |
| 31 | Providing 12 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor |
| 32 | First floor |
| 33 | Second Floor |
| 34 | Providing 12 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor |
| 35 | First floor |
| 36 | Providing 16 mm thick C.P. with C.M. (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor |
| 37 | First floor |
| 38 | Second Floor |
| 39 | Providing 6 mm thick C.P. with C.M. (1:4) with screened and washed sharp sand for mortar and finished smooth over RCC surface in all heights including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. - Ground Floor |
| 40 | First floor |
| 41 | Second Floor |
| 42 | Supplying, fitting and fixing of M.S. grills, grill gates, M.S. gates, garage door, Steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar of 10mm as per approved drawing and design with cost of all labour, materials & T&P, sundries etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge. |
| 43 | Providing 2.5 cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab including watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as per OPWD specification & direction of Engineer-in-charge - Second Floor |
| 44 | Providing and fixing of 0.40 mm thick G.C.I. (Galvanized Corrugated Iron) sheets in roofing, including necessary nuts, bolts and other required accessories, complete in all respects as per the direction of the Engineer-in-Charge |
| 45 | Supplying, diluting and preparing chemical emulsion like Imidacloprid 30.5 % SC or other chemicals approved by Central Insecticides Board or as directed by the manufacturer and spraying the mixture uniformly by sprayer as Pre-Constructional Anti-termite Treatment confirming to IS 6313 (Part-II) and creating a chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of walls and floors along with external perimeter of the building, expansion joints, surrounding the pipes and conduits etc. at the rate of 7.5 liters per sqm on vertical surface and 5.0 liters per sqm on horizontal surfaces, 50% of the emulsion to be filled in the holes made in trenches at 150mm center to center (or as directed by the manufacturer) including the cost of all materials, cost of all labour, conveyance, loading, unloading, T&P, etc. all complete as per the direction of Engineer-in-Charge. |
| 46 | EI works : Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard with 20 mm dia HMS FRLS PVC conduit ISI marked Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal 6A modular type ( flame retradant type) switch ISI marked Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) ( flame retradant type) Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. . All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.NB:All the electrical,Fire fighting,HVAC,ELV drawings, Technical Data Sheets & make will be approved by SE R& B Electrical circle & CE Building ,Odisha ,Bhubaneswar prior to execution of the work. - Group A |
| 47 | Group B |
| 48 | Group C |
| 49 | Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( ( flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 50 | Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)(( flame retradant type)) with suitable size modular box & cover( flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge.. Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 51 | Supplying,fixing of 6A Plug on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( ( flame retradant type)) with suitable size modular box & cover(anti bactorial & falme retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius) /Panasonic (vision) .(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 52 | Supplying,fixing of 2x6A+1X16A Plug on the separate board with complete fitting by 01 no of 16A+2 no 6A switch & socket(modular type) ( flame retradant type) with suitable size modular box & metallic cover plate (both side)( flame retradant type)including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge..Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) (For equipement power)(Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 53 | Supplying and installation of AC Point having 16-20A DP MCB, C series with enclosure, Schneider/Siemens/Legrand/ABB of suitable size as required as per direction of Engg.-in-Charge .All the Components should be warrantied for a replacement period of 1 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials. |
| 54 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge. 2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5) |
| 55 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5) |
| 56 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit .(PDB to PSB/ POWER POINT/AC POINT) (2X4+1X1.5) |
| 57 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuty conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/Medical equipement) (4X6+2X4) |
| 58 | Recessed wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable Make- Finolex/Anchor/Polycab/HAVELLS/RR KABLE/KEI/V-Guard in recessed HMS FRLS PVC conduit of mentioned size Make-AKG/BEC/Precision/Norpak/Anchor/Kinjal as required as per direction of Engg.-in-Charge.4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuty conductorin 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6) |
| 59 | 4 Way(8+(4x3)+(3x4)) Way TPN MCB DD 7 Segment DB Horizontal Type as per IEC 61439-3 with configuration of incomming I-8 modules,sub incommer-12 module & out going-12 modules,suitable for Flush mounting and Surface mounting with Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door Warranty on DB is 3 years |
| 60 | Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 230 volts, RCCB 30mA . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year |
| 61 | Supplying and fixing 63Amps 4P 415 volts MCB, C series, 10kA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 1 year. |
| 62 | Supplying and fixing 63 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB FB 200 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. . The RCCB should be Replacement Warranty will be 1 year |
| 63 | Supplying and fixing 40Amps 4P 415 volts MCB , C series, 10kA Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ABB SB 200 in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge..Warranty on MCB is 1 year. |
| 64 | Supplying and fixing of Type (I +II) 3P+N SPD with Lightening impulse discharge current I imp(10/350) µs 7kA/POLE and 25kA total and maximum discharge current Imax(8/20) msec-50kA,with response time<25 nanosec in the incommer of Distribution board, Make-LEGRAND / Siemens/ Schneider/OBO/Dehn/ABB/ABB in the existing MCB DB with connections as per direction of Engg.-in-Charge.The SPD should have Replacement Warranty will be 1 year. |
| 65 | Supplying and fixing 40Amps 2P 240 volts AFDD+MCB(arc fault detection device) Make-ABB S ARC1 M/Equivalent model of Schneider/Legrand/Siemens ,10KA,C series,1PH+N,IEC-62606 for arc fault in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge.Warranty on MCB is 1 year |
| 66 | Supplying and fixing 6 amps to 32 amps rating, 240 volts, C series,10KA breaking capacity, single poles MCB of Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 the existing MCB DB complete with connections as per direction of Engg.-in-Charge. .Warranty on MCB is 1 year. |
| 67 | Fittings & FixturesSupplying an fixing of recess/surface mounted 2'x2' 40 W(595mmx595mmx70mm) square shaped dali dimmable LED with lumen efficacy not less than 120lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj) . The luminaire must be Replacement Warranty will be 5years. |
| 68 | Supply and fixing of DALI Controller wireless IoT System having BLE 5.2 AES 128 Bit encyption based 32 channel DALI controller and analog 2 channel (0-10V) output, operates on 100-277 VAC, 10- 30mA, 50Hz, DALI 2.0 protocol. Sensor input of 0-3V DC & 1mA. For analog dimming, It provides output voltage of 0- 10V DC +/- 0.2V and 15mA per channel. For DALI output, it provides 12-20V DC and 160mA max for 32 DALI devices. An auxillary power output of 3.3VDC and 30mA. 0 - 100% dimming, device to device range 45m. Controller must control individually control standard DALI or Tunable DALI Drivers independantly or combination of both. Operating temperature -20 to 50 deg celsius, surge protection 3kV. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. Mobile Application shall have features of individual & group control for on/off/dimming/ colour tuneing / Scene Control / Animation etc. Device must have security key for commissioning and replacement for future. MAKE: PANASONIC/PHILIPS/BAJAJ/Crompton/WIPRO/HAVELLS/LT |
| 69 | i-Sense BLE 5.2 AES 128 Bit encyption based wireless battery powered 5-button wall switch that controls ON/OFF, intensity and CCT of an individual or group of luminaires.Operates on 3V DC input voltage in an ambient temperature of 0 to 50 deg celsius and device to device range 45m. System shall support easy commissioning and configuration via Mobile Application along with user and site management features. Optional Cloud Application must be available for control and monitoring of the devices along with analytics reports. MAKE: PANASONIC/ PHILIPS/ BAJAJ/ Crompton/ WIPRO/HAVELLS/LT |
| 70 | SITC of 2W/mtr profile RGB LED light with extruded Aluminium housing material, 12/24V in complete as per direction Eng-in-charge.Make-Leksa/Canara/PANASONIC/ PHILIPS/ BAJAJ/ CROMPTON/ WIPRO/ HAVELLS/ LT |
| 71 | SITC of extruded black powder coated Aluminium housing 2W/ mtr step light with provision for LED strip with diffuser, provision for illuminated seat numbering on both sides, rubber grip, vertical screwing ,12/24V in complete as per direction Eng-in-charge.Make-Belight/Illumax/Equivalent |
| 72 | SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2200 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj). The luminaire should be Replacement Warranty will be 2 years . |
| 73 | Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/LT/Havells /Philips/Wipro /Crompton/Bajaj).The luminaire should be Replacement Warranty will be 2 years |
| 74 | Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm 1700 cmh air delivery with louvers of exhaust fan in the existing wall, including fixing & conntection complete etc.as required and as per the direction of E.I.C..(Make-USHA / /Havells/ ALmonard/ Crompton/Orient/Bajaj |
| 75 | Supply, Installation, Testing and Commissioning of Duct mounted Single skinned Circular Inline Centrifugal Fan for Toilet Ventilation with direct driven Backward-curved impellers.The Fan has external rotor motor suitable for 1~, 230V, 50 Hz power supply. MAKE - SYSTEMAIR/ GREENHECK/ ELTA/Airflow1000 CFM @ 15mm MMWG static pressure |
| 76 | Supply & Fixing of Air Distribution Duting fabricated with Class VI GI Sheet(180 GSM) Complete With Supports, dampers, guiding vanes, access doors, MS Angle, Fire inhibiting gaskets, Nuts, bolts and all oyher accessories in accordance with approved drawing and the Specification. (Make:- Jindal/ Sail/ Tata)22 gauge (0.80 mm thickness) |
| 77 | 24 gauge (0.63 mm thickness) |
| 78 | Supply, erection, testing & commissioning of Aluminium powder coated grills/diffuser without VCD having flange all around.Make-Glenstorm/Airflow/Systemaire |
| 79 | Supply, delivery, installation and testing of following Sweeps of High Speed Energy Efficient wall FAN 600 MM Air Delivery Wall Fan Motor Speed: 1440 RPM Power Consumption: 180 W Blade Sweep Size: 600 mm Number of Speed Settings: 1 Material: Metal..Dominarie wall Fan complete with Canopies & Capacitor etc. including supply of Sundry Materials, making connection from the suitable point outlet complete as required and as per the Direction of Engineer-In-ChargeMake-USHA /Havells/ ALmonard/ Crompton/Orient/Bajaj |
| 80 | S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge ( Make-Schneider(Zencelo)/legrand( Myrius)/Panasonic (vision) |
| 81 | Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC copper winding ceiling fan with aluminium blades having wattage not more than 28W and air delivery 215m3/min Make-Crompton Energion Groove /Havells Efficiencia Neo/Usha Technix/Bajaj Turbo Pro 12DC5 ) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years.(With fan Regulator compatible) |
| 82 | Supplying,fixing of perforated cable trays Size 60mm(H) x 200mm(W) with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge. |
| 83 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 300mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge. |
| 84 | Supplying,fixing of perforated cable trays with horizental & vertical bends,reducers ,tees,crossover,brakets & other accessories ar requited confirming to IS-IEC -61537 ,the cable tray shall be galvanised for corrosion protection confirming to DIN EN 10346/ISO 1461. Size 60mm(H) x 400mm(W) of MAKE- Profab/OBO/Neidax.The Load bearing capacity of the Cable Trays should be minimum of 104.8Kg/meter at the span of 1.5Meter as per UL specifications as required as per direction of Engg.-in-Charge. |
| 85 | MAIN PANEL S/I/T&Commissioning of CPRI tested LT indoor floor mounted cubical type electrical main panel (for both light and power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by siemens gray powder cote paint fallowed by 9 tank acid treatment is designed as G.A drawing as per direction of Engg.-in-Charge.Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.80X10MM Separate Aluminium Earth bus bar should be installed.Detailed GA drawing of the Panel, control wiring and power wiring drawing are to be submitted to SE Electrical Circle(R&B) before execution of the work. All the feeders shall have ON/OFF/TRIP indication. Mandatory provision of cable alley is to be given.In commer-1-01 number of 800A 4P MCCB with ROM 36kA with adjustable Micro processor Release with Ics=100% Icu. (make- -LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB formula)with shunt trip.with axulary for BMS ( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula (FROM Transformer) Changeover-01 number of 630A 4P changeover switch ( Make-LEGRAND/ Siemens/ Schneider/ABB)Busbar- 04 numbers of 900Amps Aluminum busbar with 1A/SQ.MM current carring capacity. busbar duly sleeved by color coated PVC sleeve & supported by suitable size DMC insulator. |
| 86 | FLOOR LIGHT PANEL(2 Nos.) : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.In commer- 01 no 100A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula)Busbar- 04 numbers of 200Amps Aluminum bus bar Aluminum busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 40A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-100Amps Ammeter with CTs 100/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB |
| 87 | UPS Outgoing panel(1 no.) : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for both light circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.In commer- 01 no 125A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB Formula)Busbar- 04 numbers of 200Amps Aluminum bus bar Aluminum busbar duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 06 nos 63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-150Amps Ammeter with CTs 150/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB |
| 88 | FLOOR POWER PANEL : S/I/T&Commissioning of LT indoor floor mounted cubical type electrical main panel (for power circuit) made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.In commer- 01 no 125A 4P MCCB 25kA with TMR based release with adjustable overload ,Icu=100%Ics( Make-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA)Busbar- 04 numbers of 200Amps Aluminum bus bar Electrolytic duly sleeved by color coded PVC sleeve & supported by suitable size DMC insulator. Out going- 04 nos 63A 4P MCB 10kA,C series Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200 Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-200Amps Ammeter with CTs 200/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB |
| 89 | STAGE PANEL:S/I/T&Commissioning of LT indoor floor mounted cubical type electrica panelmade out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder cote paint is designed as G.A drawing.as per direction of Engg.-in-Charge. Warrentee period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.. 20X10MM Separate Aluminium Earth bus bar should be installed. All the feeders shall have ON/OFF/TRIP indication.Incomer:125 A 4P MCCB (25 KA) with adjustable thermal setting Ics = 100% of Icu Bus bar: 4 nos. 200 A Aluminum Busbar duly sleeved Outgoing: 8 Nos 40A DP MCB. (10 KA) ,C series and 4 nos. 32A FP MCB , C series Instruments: 1 set.LED type phase indicating lamps with control fuses Complete duly factory wired as per SLD and panel should have proper earth by suitable rated Aluminium flat earthing studs as per specification mentioned below duly factory wired conforming to the relevant ISS as per the direction of Engineer-in-charge..MAKE OF MCCB- LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULAMake of MCBs- LEGRAND-DPX3/Siemens-Betaguard-Schneider-Acti-9/ABB SB200Instrument- (i) 03 numbers phase indicating lamp with toggle switch & HRC fuse. (ii) 01 set of 0-200Amps Ammeter with CTs 200/5A 3 nos class 1 type(Make-Siemens/Schneider/ABB/Legrand).(DIGITAL)(Siemens/Schneider/ABB/Legrand)(iii) 01 set of 0-500 voltmeter .(DIGITAL)Siemens/Schneider/ABB/Legrand1 no. 3P+N 40kA type 2 SPD with 63A rating,10KA breaking capacity ,4P MCBMake-LEGRAND / Siemens/ Schneider/ABB/OBO/Dehn/ABB |
| 90 | SITC of LT indoor floor mounted cubical type lift panel made out by 2mm CRCA steel sheet duly derusted & painted by simens grey powder coated paint is designed as G.A drawing. (FOR LIFT)as per direction of Engg.-in-Charge. Warranty period of replacement of panel & accessories must be 1 year & compelete test certificate must be submitted along with panel board including component list.Type 2 SPD(3P+N) 40ka with 63A 4P,C series, 10kA shall be installed in the incomer. 20X10MM Separate Aluminium Earth bus bar should be installed. 63amp panel board having 63A Amp 16KA 4P MCCB TMR based release with adjustable overload ,Icu=100%Ics as incommer, 100 amp aL bus ba-1 Set, 63A Amp 4P RCCB 30mA- 1 No,25A Amp DP RCCB 30mA- 2 No,6-32A DP MCB 10ka, c series -2 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator,Drum insulator,transparent isolation glass,danger Board and Rubber Mat as per the direction of site engineer in charge (make of mccb :-LEGRAND-DPX3 / Siemens-3VA Model/ Schneider- CVS/ABB FORMULA) Make of MCB-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ABB SB200(Lift Panel) |
| 91 | Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/Gloster/KEI/RR Kabel of following size cables as per direction of Engg.-in-Charge. 3.5 core x 300 sq mm Aluminium armoured Cable.(FOR Main PANEL) |
| 92 | 3.5 core x 50 sq mm Aluminium armoured Cable.(FOR Floor PANEL) |
| 93 | 3.5 core 25 sqmm Aluminium armoured Cable (LIFT ) |
| 94 | Supplying and laying of one number PVC insulated armoured and PVC sheathed XLPE property copper conductor power cable of 1.1 KV grade Make- Finolex/Polycab/HAVELLS/Gloster/KEI/RR Kabel of following size cables as per direction of Engg.-in-Charge. 5 core x 10 sq mm COOPER armoured Cable |
| 95 | Supplying and making end termination with brass double compression gland and aluminium lugs for following mentioned size cable.3.5 core x 300 sq mm brass double compression gland and aluminium lugs |
| 96 | 3.5 core x 50 sq mm brass double compression gland and aluminium lugs |
| 97 | 3.5 core x 25 sq mm brass double compression gland and aluminium lugs |
| 98 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size exceeding 120 SQ. MM but not exceeding 400 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge. |
| 99 | Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 120 SQ. MM From 25 SQ. MM in surface with shaddle and screw etc as required as per direction of Engg.-in -charge. |
| 100 | EARTHINGSupplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge. |
| 101 | Providing and fixing 25 mm X 5 mm GI strip on surface or in recess for connections etc. as required. |
| 102 | Providing and fixing 50mm x 6 mm GI strip on surface or in recess for connections etc. With insulated GI Flat holder as required as per direction of Engg.-in-Charge. 2 runs. |
| 103 | Supply and fixing of shock treatement charts duly laminated along with separate colour single line diagram laminated, to be fixed in Electrical control panel room. |
| 104 | Supply and fixing of first aid box with medicines complete with medicine with three years expiry date to be fixed in Electrical control panel room.. |
| 105 | Supplying of following Materials.Supply installation of high-voltage insulating mat has a thickness of 3.0 mm, rated for maximum use voltage of 33 kV. It withstands an AC proof voltage of 36 kV and an AC dielectric strength of 65 kV, with maximum leakage current limited to 10 mA. Minimum insulation resistance (5000V megger) is 1,00,000 M. Tensile strength is minimum 15 N/mm², with 250% minimum elongation. After 168 hrs aging at 70±1°C, retention is minimum 75% (tensile & elongation); after 48 hrs immersion in acid/alkali/diesel/oil, retention is minimum 80%. The mat offers low-temperature resistance and flame retardance, made of synthetic elastomer, conforming to IS 15652. complete as per direction of Eng-in-charge.(Size-10mx1m) make : mandelia insulation and transmission co./Duratuf/Raychem/Vardhman |
| 106 | Danger Board. |
| 107 | SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance 9.38 /100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax, Legrand, Panduit. |
| 108 | SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make:Valrack, Rittal, Legrand |
| 109 | Supplying and fixing of following sizes of heavy class PVC FRLS conduit ISI marked along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required as per direction of Engg.-in-Charge .Make-AKG/BEC/Precision/Norpak - 20 MM |
| 110 | 25 MM |
| 111 | Audio systemSurround for Stall and Balcony: SITC of Cinema Surround Speaker with high power 12\\" or more full range driver. Frequency Response 70Hz to 18KHz or better. AES Power Rating of 220W or more. Sensitivity of 98dB @1W/1m or more. Contineous Maximum SPL of 121dB or more. Nominal Inpedance 8 ohm or better. Dispersion 85 degree or more. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 112 | Amplifier: SITC of Four-Channel Class AB 2000W Amplifier. Frequency Response of 20Hz to 20KHz or better. SNR of 108dB or more. Slew rate > 10 V/us or better. Cooling Air flow from front to rear. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 113 | Amplifier: SITC of Three-Channel Class AB 3500W Amplifier. Frequency Response of 20Hz to 20KHz or better. SNR of 108dB or more. Slew rate > 10 V/us or better. Cooling Air flow from front to rear. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 114 | SITC OF 6 CHANNEL POWER AMPLIFIERS: each amplifier should deliver minimum power 200 watts per channel @ 8 ohms, 300 watts per channel @ 4 ohms. Frequency Response should be 30Hz to 20KHz +- 0.2 dB. Damping Factor greater than and equal to 100 and minimum signal to noise ratio of 95dB. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 115 | LEFT & RIGHT LINE ARRAY CLUSTER: SITC of the cluster should provide a minimum horizontal disperssion angel 0f 100 degrees and a vertical angel of 70 degrees and be capabale of delivering a SPL of 105dB contineous Pink Noise at a distance of 65-ft with a minimum frequency response of 65Hz to 19KHz which is identical on both sides of the cluster. The cluster should be composed of minimum 8 nos of 8\\" Line Array Elements each having power handling of 250 watts AES, Sensitivity of 97dB @ 1 Watt 1 Meter or higher. The speakers should be course texture. The enclouser should be made up of European Brich Plywood. All metal parts should be powder coated or stainless steel. The complete unit should be black in colour. The rate is inclusive of chain, pulley ,flying stack system for Line Array spekaers, array frames/ Hanging/ Mounting arrangement for Suspension of upto 8 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings and other accessories for the speakers.Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 116 | SITC OF SUB-WOOFER: front of the stage subwoofer with minimum of 18 subwoofer drivers. With power handling capacity of 2000W (4000W peak). Frequency response of 35Hz to 200Hz or better. Sensitivity of 98dB @ 1W/1m. Continuous maximum SPL of 130dB. The rate is inclusive of brackets and other accessories as per the direction of Eng-in-charge. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 117 | SITC OF STAGE MONITOR SPEAKERS: The speaker should be coaxial and provide a disperssion angel of 60 degress conical and be capable of delivering a SPL of 105dB contineous Pink Noise at a distance of 15ft with frequency response of 55 Hz to 20KHz. The speaker should be composed of minimum 12\\" driver each having power handling of 250 watts AES, Sensitivity of 98dB @ 1 Watt 1 Meter or higher. The speakers should be course texture. The enclouser should be made up of European Brich Plywood. All metal parts should be powder coated or stainless steel. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 118 | FOH: SITC of 2-Way passive loudspeaker consists of 1\\" or more HF Driver and 12\\" or more LH Driver. Frequency Response of 70Hz to 20KHz or better. AES Power Rating of 400W or more. Sensitivity of 95db @1W/1m or more. Contineous Maximum SPL of 120dB or more. Nominal Impedance 8 ohm or better. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 119 | SITC of MS upport Wall Mounting Accessory for above FOH speaker. |
| 120 | Operator Speaker: SITC of 2-Way passive loudspeaker consists of 1\\" or more HF Driver and 10\\" or more LH Driver. Frequency Response of 65Hz to 20KHz or better. AES Power Rating of 150W or more. Sensitivity of 95db @1W/1m or more. Contineous Maximum SPL of 115dB or more. Nominal Impedance 8 ohm or better. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 121 | SITC OF Green Room SPEAKERS: The speaker should be coaxial and provide a disperssion angel of 90 degress conical and be capable of delivering a SPL of 112dB with frequency response of 70 Hz to 20KHz. The speaker should be composed of minimum 8\\" driver each having power handling of 120 watts AES, Sensitivity of 93dB @ 1 Watt 1 Meter or higher. Make: Pulz/ L-Acoustic/ Martin Audio/Bose |
| 122 | DSP: SITC of Digital Speaker Processor with 16 input and 16 output. Phantom Power 48V per channel. S/N Ratio >103dB or more for Line, >93 dB for Mic. Processor 48kHz sampling frequency, 32-bit floating-point DSP or better. Each input channel has minimum 30 EQs selectable to PEQ or Shelving or All pass filter.Make: Pulz/Xilica/Bose/Clearone |
| 123 | SITC of Digital wireless handheld Microphone with UHF transmission greatly enhances range, reliability and scalability of 56 MHz Bandwidth will allow for up to 90 channels Up to 2,200 or more selectable frequencies with Mobile App integration setup 134 dB or more transmitter dynamic range Lithium Ion battery pack delivers up to 10 hours of operation (up to 6 hours of operation with AA batteries) Transducer principle dynamic with Pick-up pattern cardioid, Sound pressure level 154 dB SPL, Transmit power : 10 mW. Make: Sennheiser/Clock Audio/Rode |
| 124 | SITC of active antenna splitter 2 x 1:4 or 1 x 1:8, Digital transmission operating in the UHF spectrum , Auto scan features, 134 dB or better audio input dynamic range , 56 MHz of tuning bandwidth and provision up to 90 channels, 2,200 or more selectable frequencies. Make: Sennheiser/Clock Audio/Rode |
| 125 | SITC of digital directional antenna with Impedance:50 Ohm; Connector: BNC; Pick-up pattern: directional;Frequency range: 470 - 1075 MHz or better;Antenna gain: 5 dBi or better; Bidder Shall Submitted OEM Authorizationalong with technical bid Make: Sennheiser/Clock Audio/Rode |
| 126 | SITC ANTENNA BOOSTER with 56 MHz of tuning bandwidth and provision up to 90 channels, 2,200 or more selectable frequencies. Make: Sennheiser/Clock Audio/Rode |
| 127 | SITC of super-cardioid pre-polarized condenser instrument microphone with frequency response of 40 Hz- 20,000 Hz or better and sensitivity of 3 mV/P at 1 kHz or better , Maximum SPL of 139 dB at 1 kHz. Nominal impedance of 50 Ohm or better, with a min. terminating impedance of 1 kOhm or better. Make: Sennheiser/Clock Audio/Rode |
| 128 | SITC of pre-polarized condenser gooseneck microphone with overall length of 450mm or better, with XLR3M-type connector, shall offer radio frequency interference (RFI) shielding against intermodulation from wireless equipment or devices, cardioid microphone capsule with uniform 120° angle of acceptance (-3dB) or better, frequency response of 50 Hz to 20,000 Hz or better and sound input levels handling capability of minimum 130 dBspl or better, nominal equivalent noise level of 26 Dba or better and output shall be low impedance balanced (<100 ohms) with current consumption shall be 3 mA or better. Table stand with Microphone modes Toggle on / off, Push to mute, Push to talk, permanent on for connecting and operating XLR gooseneck microphones with XLR-3F microphone input and an XLR-3M microphone output operating on 48 V phantom power and current consumption of 3.7 mA or better. Make: Sennheiser/Clock Audio/Rode |
| 129 | SITC of dynamic cardioid vocal microphone with frequency response of 40 Hz 16,000 Hz or better and the sensitivity of 2.7 mV/Pa at 1 kHz or better, nominal impedance of 350 Ohm or better, with a min. terminating impedance of 1 k Ohm.Make: Sennheiser/Clock Audio/Rode |
| 130 | SITC of cardiod pre-polarised condenser microphone with Frequency response of 20 - 20,000 Hz, Sensitivity of 7 mV/Pa;2.3 mV/Pa / 0.7 mV/Pa(with pre-attenuation) or better, Sound pressure level at 1 kHz of 137/147/157 dB SPL(depending on pre-attenuation)Nominal impedance 100 ohm Min. terminating impedance 1 k ohm or better Make: Sennheiser/Clock Audio/Rode |
| 131 | SITC of 48 Input Channels Digital Mixer with 32 Local Mic Inputs (XLR), 2 ¼ Stereo Inputs (TRS), 1 3.5mm Stereo Input, 36 Total Busses, 12 Stereo Mix (Aux or Group) + Main, AES Digital Output, I/O Port for Option Card (including 3rd party protocols Dante/Waves), 7\\" colour touchscreen, 32+1 Faders with 6 Layers for 192 assignable Channel Strips, 32 Backlit LCD Channel Strip displays, SQ-Drive for stereo and multitrack recording/playback direct to USB drive, USB transfer of Scenes, Libraries, Shows, 32x32 channel USB streaming to/from Mac/PC. Make: Yamaha/ Allen & Health/ Behringer |
| 132 | SITC of Snake Cable: Supply and Laying of 8 pair Analog Audio Snake Cable, 24. AWG stranded (7x32) TC conductor, Polyolefin insulation, individually shielded, number or color-coded PVC jackets and shields bonded to stripsimultaneously over all shield and 24 AWG TC drain wire. Make: Krystals/ Kramer/ Belden |
| 133 | SITC of Speaker Cable: Supplying and Laying of 2.5 Sq.mm 2 core speaker cable.Make: Krystals/ Kramer/ Belden |
| 134 | SITC of Speaker Cable: Supplying and Laying of 4.0 Sq.mm 2 core speaker cable Make: Krystals/ Kramer/ Belden |
| 135 | SITC of Speaker Cable: Supplying and Laying of 6.0 Sq.mm 2 core speaker cable Make: Krystals/ Kramer/ Belden |
| 136 | SITC of Microphone Cable: Supplying and Laying of of 20 AWG 2 core microphone cable Make: Krystals/ Kramer/ Belden |
| 137 | SITC of Connectors: SITC of required adequate AV connectors: XLR male, XLR female, RJ45, 3.5mm Stereo Connector, 6.35 mm mono connector, BNC.Make: Neutrik/ MX/ Krystals/ Belden/ Legrand |
| 138 | SITC of Stage Box: SITC of 8 XLR stage box. Make: Custom Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender