Tender For Rd Road To Talasingi_Road_Jungle Clearance, Pot Hole Repair,Pmc Seal Coat0.000 To 2.350
Tender Value
16.94 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
1 days left
EMD
16950
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gajapati → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Rd Road To Talasingi_Road_Jungle Clearance, Pot Hole Repair,Pmc Seal Coat0.000 To 2.350
BOQ
| Sl. No. | Item Description |
| 1 | Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used. |
| 2 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 kms spreading, grading to required slope and compacting to meet requirement. |
| 3 | Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5 kms spreading, grading to required slope and compacting to meet requirement.(DRAIN CUTTING) |
| 4 | Providing , laying, spreading and compacting stone aggregates using IRC Gr-III size granite metal to Water Bound Macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel roller 8-10 tonne in stages to proper grade and camber, applying and brooming requsite type of screening / blinding materials as crusher dust to fill up the interstices of coarse aggregate, watering and compacting to the required density as per clause 404 of MoSRT&H Specifications for Road & Bridge works (4th Revision). |
| 5 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface of granular base including clearing of road surface and spraying primer at the rate of 06 Kg/sqm using mechanical clause 502 of MOSRT & H specifications for raod and bridge works(4th. revision) |
| 6 | Providing and applying tack coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface of granular base including clearing of road surface and spraying primer at the rate of 0.2 Kg/sqm using mechanical clause 503 of MOSRT & H specifications for raod and bridge works(4th. revision) (over GSB)(3kg/10sq.m) |
| 7 | Providing and applying tack coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface of granular base including clearing of road surface and spraying primer at the rate of 0.2 Kg/sqm using mechanical clause 503 of MOSRT & H specifications for raod and bridge works(4th. revision) (over BT Surface)(2kg/10s.m) |
| 8 | Providing Surface dressing with 12 Kg penetration grdae of bitumen and 0.15 cum of 19mm nominal size chips per sqm and rolling with PRR including hire and running charges of PRR but excluding cost and conveyance of chips. (To be used for minor repair works Unit= Sqm) |
| 9 | Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects |
| 10 | Maintenance of 200 metre, km stones & 5th Km stones by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912 of MORD as per direction of the Engineer in charge. |
| 11 | Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as perdrawings and technical specification Clause 1910 of MORD as per direction of the Engineer in charge. |
| 12 | White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per MORD technical specifications Clause 1915 as per direction of the Engineer in charge. |
| 13 | Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause Annexure 300,800,1700 of MORD as per direction of the Engineer in charge |
| 14 | Providing and erecting direction and place identifications of semi reflective sign boards of size upto 0.90 Sqm. as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and MORD technical Specification Clause 300,800,1700 as per direction of the Engineer in charge (Inter mediate Board) |
| 15 | Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. Km stone |
| 16 | Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and MORD technical Specification Clause 1703 as per direction of the Engineer in charge. 200m stone |
| 17 | Supplying and fixing 15cm dia and 1m long guard post of RCC M20 of 3.5kg steel for each guard post with 20mm down graded granite chips including cost of all materials,reinforcement, centring, shuttering, watering etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender