Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #58362176

Tender For Improvement Of Seorinarayan And Champa Gauge Site Office Of Hirakud Dam Project For The Year 2026-27.

Issued by Government Departments · Janjgir champa, Chhattisgarh
Tender Value
7.68 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
0 days left
EMD
7682
Bank guarantee accepted
Document Fee
4000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Janjgir champa → Chhattisgarh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Improvement Of Seorinarayan And Champa Gauge Site Office Of Hirakud Dam Project For The Year 2026-27.

BOQ

Name of Work:- Improvement of Seorinarayan and Champa Gauge site office of Hirakud Dam Project for the year 2026-27.
Sl. No. Item Description
1Earth work excavation of foundation in hard soil or gravelly soil with 50mtr initial lead and 1.50mtr lift including dressing and levelling the bed and depositing the excavated soil away from work site with all leads,lifts and delifts including cost of all lobours,T & P etc. comoplete as per direction of the E I C.
2Filling in foundation and plinth with sand well, watered and ramming including cost of all lobours and T & P etc complete as per direction of the EIC
3Cement concrete (1;3:6) using 40mm.size hard granite Crusher broken chips of approved quality free fromweathered skin and flakes Including cost, conveyance,royalty and taxes of all materials and cost of all Labours and T&P etc. complete as per direction of Engineer-in-charge
4Cement concrete (1:1.5:3) using 12mm.size hard granite Crusher broken chips of approved quality free fromweathered skin and flakes Including cost, conveyance,royalty and taxes of all materials and cost of all Labours and T&P etc. complete as per direction of Engineer-in-charge
5Fly ash brick work with in C.M. (1:6) in foundation & plinth using brick for size (25cmx12cmx8cm) having crushing strength not less than 75 kg/cm2 including cost, conveyance, royalty etc. complete as per direction of Engineer-in-charge.
6Supplying, fitting and fixing Vitrified tiles in floors of size 600mm x 600mm of approved make confirming to IS : 13755 laid on 20 mm thick Cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T & P etc. required for the work all complete as per direction of the Engineer-In Charge. (For New work Only)
7Fixing Ceramic wall tiles (400mm x 400mm)in dados/ wall/ skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles, complete as per direction of the Engineer-In Charge.
8Supplying and fixing of 80mm thick cement concrete interlocking paver block of M-40 grade of approved make, design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in alll respect conforming to IRC SP- 63:2018.
9Fixing Wash down Water Closet (European type W.C Pan)with integral \\"S\\" or \\"P\\" trap conforming to IS 2556: Part 8-2004,to the floor with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complete as per specification (Seat and cover to be measured and paid separately)
10Fixing Wash Basins with hole for pillar taps confirming to IS 2556 : Part 4-2004 with cast iron or MS brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification.
11Fixing of PVC waste pipe of following nominal diameter for wash basin or sink includingbrass check nut complete as per specification.
12Fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin complete as per specification.
13Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to woooden plug with chromium plated brass screws and washers complete as per specification.
14Providing and fixing to wall or ceiling and floor 25mm PVC Pipes class confirming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification.
1512mm thick cement plaster ( 1 : 6 ) for brick work with all cost, carriage, Royalty, T & P etc complete as per direction of Engineer in Charge. (Item No-4, Page No- 103) Data for one sqm.
16Supply at work site M.S Pannelled door double leaved shutter with M.S. framed over all size including frame 1980 mm (H) x 1070mm(w). made out of the following materials confirming to relevant Indian standard specifications frame 35 x 35 x 6mm M.S. angle shutter style top and bottom rail 25 x 25 x 3 mm. M.S. angle door panel10 mm gauge M.S.C.R. sheet panel stiffener covering width of each leaf with 19 x 5 mm. M.S. flat 2 3 Nos. on each leaf hinge size 100 mm 6 nos ( 3 nos in each side ) bought out as per ISS hold fast - 35 x 35 x 6mm. M.S. angle 175mm length bifurcated at the tip 3 nos. on each side handle 19 x 5mm. M.S. flat fabricated 4 nos. aldrop 2 nos. wrought out as per ISS Tower bolt 2 nos but out as per ISS. including cost of all materials, labours, fabrication and transportation charges etc. complete as per direction of Engineer-in-charge.
17Supply at work site M.S Paneled window double leaved shutter with M.S. framed and grill over all size including frame 1220 mm (H) x 910mm (W) made out of the following materials confirming to relevant ISS frame 35 x 35 x 6mm. M.S. angle shutter with style top and bottom rail 25 x 25 x 3mm. M.S. angle window panel 10 mm .C.R. sheet panel stiffener covering width leaf with 19 x 5mm. MS flat 2 nos. on each leaf hinges Size100 mm 4 no (2 nos on each side) brought out as per ISS hold fast 35 x 35 x 6 mm. M.S. angle 100mm. length bifurcated at the tip 2 nos. on each side handle 19 x 5mm. M.S.flat 2 no’s fabricated in sides Tower bolt 4 no’s brought out as per ISS Horizontal grills 12 mm Round at 100 mm spacing.
18M.S window grill, made out of M.S flat conforming to IS 2062/2006 painted with red oxide primer, as per the design approved the purchaser.
19Labour for fitting and fixing of M.S. window grills etc. as per approved design including cost, conveyance of all materials etc. complete as per direction of Engineer-in-charge.
20Labour for fitting and fixing of M.S. gate etc. as per approved design including cost, conveyance of all materials etc. complete as per direction of Engineer-in-charge.
21Priming one coat with any approved water bound Primer in Plastered surface work including cost of paint, materials, Labour T & P etc. complete as per direction of Engineer inCharge.
22Painting two coats with approved exterior weather coat on exposed wall surface including cost, carriage of all materials including labour charges etc. complete and as per direction of the Engineer-In-Charge.
23Painting two coat with any approved shade of enamel paint on new wood / iron work including cost, conveyance, taxes of all materials and cost of all labours and T&P required for the work etc. complete as per direction of Engineer-in-charge.
24Providing, fitting, fixing up informatory sign board (SIZE 6 x 4 ft) = 24 Sq Ft using upper high efficiency full cube retro-reflective sheeting of white colour bonded on to 4 mm aluminium composite panel (0.25+3.5+0.25 - pdvf coated) over which alphabets and numerical and reverse cut with computerised cutting plotter. The board shall be provide with frame made out of stainless pipes. It shall be mounted on vertical posts made out of 80 mm NB stainless pipe as have been installed including necessary excavation for foundation, concreting /riveting etc. necessary for fixing of the board including cost of all materials, conveyance and cost of all labour, T & P etc. necessary for fixing of the board for required for the work complete in all respect as per the direction of Engineer-in Charge. (Single Side) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58362176
AUTHORITY Government Departments
TENDER VALUE 7.68 Lakhs
LAST DATE 16-11-2026
Authority
Authority Name Water Resources Department
Work Description Tender for Improvement Of Seorinarayan And Champa Gauge Site Office Of Hirakud Dam Project For The Year 2026-27.
Basic Detail
Tender No SEH AND ISM-07/2026-27
Bidding Type Tender
Location
City Janjgir champa
State Chhattisgarh
Key Dates
Publish Date 04 Nov 2026
Submission Date 16 Nov 2026
Open Date 17 Nov 2026
Finance
Tender Value 7.68 Lakhs
Tender Fee 4000
EMD 7682
Exemption Available
Document List
35b8f43f-9b8a-4c3e-aa81-570d6f0a5c37.html
BOQ_617888.xls
DTCN.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 04, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 16, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today
Nov 17, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 1 day

Tender Documents

Download All (ZIP) ↓
html

35b8f43f-9b8a-4c3e-aa81-570d6f0a5c37.html

xls

BOQ_617888.xls

pdf

DTCN.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender