Tender For Execution Of Revival Work Of Churahandi-V River Lift Project Under Nabarangpur Block In Nabarangpur District.
Tender Value
12.97 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
8 days left
EMD
12970
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nabarangpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Revival Work Of Churahandi-V River Lift Project Under Nabarangpur Block In Nabarangpur District.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Nov-2026 | Corrigendum -2 | Other | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Part-A |
| 2 | Earth work excavation in foundation in hard soil with 50 mtr initial lead 1.5 m initial lift including rough dressing and breaking clods to 2 cm to 7 cm and laying in layers not exceeding 0.3 m in depth as per direction of Engineer-in-charge |
| 3 | Filling foundation and plinth with sand watered and rammed as per direction of Engineer-in-charge. |
| 4 | Cement concrete ( 1:4:8) with 4 cm size h.g metal as per direction of engineer-in-charge. |
| 5 | Cement concrete ( 1:2:4) with 12 mm size h.g Chips as per direction of engineer-in-charge. |
| 6 | Rigid and smooth centering and shuttering for RCC work including false work and dismentalling them after casting including cost of materials complete in Column beams,Roof slab,Plinth Bend |
| 7 | Supplying, fitting and placing oncoated HYSD(TISCON) bar reinforcement complete as per drawing and technical specification including cutting , binding , bending and cost of binding wire. |
| 8 | Brick work with C.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 9 | 12mm thick cement plaster ( 1:6 ) over brick masonary |
| 10 | Random Rubble stone masonary in cement mortar (1:6) in foundation and plinth etc complete as per the direction of the Engineer-incharge. |
| 11 | Filling F & P with excavated materials, moorum including watering and ramming as directed by the engineer-in-charge |
| 12 | White washing three coats with shell lime |
| 13 | Earth work in excavation of foundation in hard soil of gravely soil within 50 mtr initial lead 1.5 m initial lift including rough dressing and breaking clods to 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth Including the cost of labour charges for compaction for OMC , hire charges of PRR & watering as per direction of Engineer-in-charge. |
| 14 | Earth work in slushy soil (in water upto 0.6m depth requiring the aid of pans and vessels) with in 50m initial lead and 1.5m initial lift as per approved by the Department. |
| 15 | De-watering of fouindation trench in slushy soil using 5 HP diesel pump on hire |
| 16 | Rough Stone dry packing in approns and revetments with hard granite stone (15 cm to 30cm) |
| 17 | Supplying of 200 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms. cc,of straight length of 6(six ) meter for portable water suppliers conforming to IS-4985/2000 of BIS- Amendment 2 read with Table =1 of IS specification bearing ISI marks for working pressure CI-I(2.5 khf/sqcm) UPVC pipe to withstand pressure of 2.50 Kgf/sqcm and the specification and manufacturer name should be prominenity marked on body of each pipe as per the latest Amendment of IS 4985.it includes the cost of sockets in case of plain ended pipe Pre & Post delivery Inspection are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPT ,Bhubaneswar /EPM ,Orissa , Bhubaneswar necessary approval of authority including transporotation and laying at site all complete with cost of solvent cement. |
| 18 | Supplying of 160 mm dia unplasticised rigid UPVC pipe ivory gray in colour having specific gravity of 1.40 to 1.46 gms. cc,of straight length of 6(six ) meter for portable water suppliers conforming to IS-4985/2000 of BIS- Amendment 2 read with Table =1 of IS specification bearing ISI marks for working pressure CI-I(2.5 khf/sqcm) UPVC pipe to withstand pressure of 2.5 Kgf/sqcm and the specification and manufacturer name should be prominenity marked on body of each pipe as per the latest Amendment of IS 4985.it includes the cost of sockets in case of plain ended pipe Pre & Post delivery Inspection are to be conducted and should be marked on body of each pipe and report is to be obtained from CIPT ,Bhubaneswar /EPM ,Orissa , Bhubaneswar necessary approval of authority including transporotation and laying at site all complete with cost of solvent cement. |
| 19 | Labour charges for laying & fitting of 200 mm dia PVC pipe |
| 20 | Labour charges for laying & fitting of 160 mm dia PVC pipe |
| 21 | Cost of supplying transportation and fixing in proper place and position including required size full threaded TVS nut bolt with CC(1:2:4) as per site condition |
| 22 | Monoblock centrifugal Star rated pumpset having discharge 1700 LPM at 18 Mtr. Head squirrel cage induction motor companion flanges and class-F insulation suitable for operation at 415 volt + 6% - 15%, 3 phase 50Hz AC power supply confirming to IS 9079/2002 with ISI mark & guarnatee period & inclusive of cost of transportation to site & the pump set should be star rated. The manufacturer should be areputed company having wide dealership network and the spare parts should be easily available. The materials of construction as given below : a) Casing: FC 200 as per IS 210/1978b) Impeller: Bronze grade LTB - 2 of IS 318/1981c) Shaft: High carbon steel grade 40 c 8 of IS 1570(part 2)d) Gasket: As per IS 5120/1977.NB: Pump set to be tested at PTL, OLIC, Bhubaneswar at random at contractor's cost. |
| 23 | 10 HP control panel with automatic Star Delta starter, MCB, 5 KVAR Capacitor fitted inside Irrigation panel of 18 gauge C.R. sheet with locking arrangement and double coat painting over one coat primer fitted with Danger Board |
| 24 | Motor hood cover of 18 gauge C.R. sheet(18\\"x18\\"x24\\") with double coat painting over one coat primer so as to cover the motor |
| 25 | MS Base plate for fitting of pannel1 No and pump 1 No |
| 26 | 3 x 10 sqm Tarpodar Cable XLPE (Cross like polythylin) confirming to IS - 7098 (Part - II) including laying below 1 mtr of the ground & fitting the excavated materials including watering & ramming. |
| 27 | Supply ,fittintg and placing of 100mmdia Nominal Bore GI pipes having wall thickness 4.5mm electrical resistance welded of medimum class confirming to IS-1239(part-I /2004) with latest amendments ,screwed at both ends as per IS-554 socketed at 1 end and other end protected with plastic threaded protector .The socket confirming IS -1239 (Part-II/1992) with latest amendments in rendom length of 4 to 7 mtrs.Each pipe should bear ISI certification and manufacturers name /trade mark. |
| 28 | Letter writings over display Board including painting with enamelled paint .Including cost of materials as per the direction of the Engineer-in-charge. |
| 29 | Labour charges for fitting ,fixing of suction ,delivery fitting including M.S Tee set ,NR valve, Switch valve and Air release valve etc minor welding transportation of materials to site etc. including nut, bolt rubber insallation etc complete. |
| 30 | 100mm dia C.I.screw base foot valve (Kirloskar make preferbely ) with ISI mark. |
| 31 | 100mm dia G.I. Bend (Medium Duty) Conforming to IS No-1239 (part-II/1992) with ISI mark of reputed brand including all Cost,Conveyance,Cess etc complete but excluding cost of GST |
| 32 | 100mm dia G.I. Flange(Medium Duty) Conforming to IS No-6392/1971 with ISI mark of reputed brand including all Cost,Conveyance,Cess etc complete but excluding cost of GST |
| 33 | 100 mm dia C.I. Double Flanged Non Return valve swing type PN-1.0 ( IS No 5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all Cost,Conveyance,Cess etc complete but excluding cost of GST (As per S/R 2022) |
| 34 | 100mm dia C.I.sluice valve Flanged type PN-1.0 as per (IS-14846-2000 Standard) with ISI mark of reputed brand including all Cost,Conveyance,Cess etc complete but excluding cost of GST (As per S/R 2022) |
| 35 | Cost,Supplying of 50mm dia Kirloskar make C.I double Air Release Valve PN 1.6 with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark including all Cost,Conveyance,Cess etc complete but excluding cost of GST |
| 36 | 200 mm dia PVC L-Bow confirming to PL-R PVC-IS 2000 F |
| 37 | 200x200x160 mm PVC Tee (6 Kgf/sqm) confirming to PL-R PVC-IS 2000F |
| 38 | 200x200x200 mm PVC Equal Tee (6 Kgf/sqm) confirming to PL-R PVC-IS 2000F |
| 39 | 200mm dia PVC end cap confirming to PL-R PVC-IS 2000 F |
| 40 | 200mm dia PVC Coupler (4 kgf/sqcm) |
| 41 | 100x100x25mm dia GI Tee for Priming with ISI mark including all Cost,Conveyance,Cess etc complete but excluding cost of GST |
| 42 | 200x100mm PVC reducing socket |
| 43 | 200x160 mm PVC reducing socket |
| 44 | 160mm dia PVC end cap confirming to PL-R PVC-IS 2000 F |
| 45 | 160mm dia PVC Coupler (4 kgf/sqcm) |
| 46 | 160 mm dia PVC L-Bow confirming to PL-R PVC-IS 2000 F |
| 47 | 160x160x160 mm PVC Equal Tee (6 Kgf/sqm) confirming to PL-R PVC-IS 2000F |
| 48 | Cost,Supplying of 160mm x160mm x110mm dia Weldless G.I Tee (3.6mm thickness) with bend,closing and opening arrangement of reputed brand including all Cost,Conveyance,Cess etc complete but excluding cost of GST |
| 49 | Cost of welding, for fitting of G.I.pipe ,G.I.bend, G.I. flange etc. |
| 50 | Renovation of existing 11 kV double-pole (DP) distribution substation with new transformer, including replacement/installation of GI channels, angles, clamps, 11 kV AB switch, HG fuses, lightning arresters, insulators, LT distribution box with MCCB, AAAC jumpers, LT cables, GI pipe and GI strip earthing, fish plates, nuts, bolts, washers, painting, sundries and construction of brick boundary wall as per TPSODL estimate and standard specifications |
| 51 | Electrical Earthing with 40 mm dia medium duty GI earthing pipe each 3 m long with installation including cost of all materials like GI flange chorcoat, salt etc. as required as per I.E Rule |
| 52 | Labour charges for electrical installation with supply of electrical petty materials like 4 sq mm flexible wire, Black tape, Fuse wire,Condute pipe etc. |
| 53 | Documentation for Water sharing agreement, Electrical agreement of Pani panchayat, list of Photographs (Pre Installation & Post Installation) power supply work such i.e sub station, H.T Line , L.T Line and water triled from distribution box etc. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
Today
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 8 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender