Tender For Repairs/Replacement Of Rolling Shutters, Galvalume Sheet, False Ceiling And Other Misc Repairs In Domestic Area At Af Stn Bhuj
Tender Value
34.98 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
17 days left
EMD
69960
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kachchh → Gujarat
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairs/Replacement Of Rolling Shutters, Galvalume Sheet, False Ceiling And Other Misc Repairs In Domestic Area At Af Stn Bhuj
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully un-serviceable/old rolling shutters of size exceeding 5 Sqm but n. exc 10 Sqm each, gear operative type for replacement of un-serviceable/defective parts, denting of various parts, cleaning of guide rails, laths, top cover by kerosene and proper greasing, oiling to make the system smooth/easy functional, repair to locking arrangements including supply and fix new nuts & bolts of existing size by removing old/rusted nut and bolts wherever required, necessary welding where ever required as directed, giving proper tension to the spring and refixing the shutter and gear box in the same opening after repair work carried out complete all as specified and as directed by the Engr-in-Charge. |
| 2 | All as per ser Item No.01 above but of Push and Pull or manual type |
| 3 | Taking down carefully old serviceable/damaged rolling shutter of any type complete and removing from the site. |
| 4 | S&F steel rolling shutters, factory made, with out ball bearing with thickness of laths 1.25mm push and pull or manual type inculding top cover, anchoring rod, hasp and staple with one shop coat of red oxide or zinc staple with one shop coat of red oxide or zinc chrome primer and fixed in position, in existing opening complete all as spd and directed. |
| 5 | All as per ser Item above but gear operated type with bevel gear box and crank handle. |
| 6 | Taking down existing unserviceable / defective suspension shaft and S&F new suspension shaft not exc 3.50m in length alongwith helical wire spring or flat sprial of proper counter balancing the weight of shutter all as directed. |
| 7 | Taking down unserviceable/defective bevel gear box and S&F new bevel gear box in position with all necessary connected fittings complete all as directed and spd by the E-in-Charge. |
| 8 | M&L preparation of old steel painted surfaces of any description exc 10 cm with or girth and applying one coat of synthetic enamel paint, complete all as spd and dirtected. |
| 9 | Supply only hood cover made out of 1.00mm thick MS sheet. |
| 10 | Dismantling asbestos cement (corrugated, Semi corrugated ,etc ) sheets in roof coverings. |
| 11 | Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed. |
| 12 | S & F Framed work such as grills, gratings, railing and grill of balcony etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and Grill on drain etc similar work con- forming to Fe.290.Gde-E-165 [ for balcony and staircase repair special care with safety precaution need to be taken as per GOI norms height shall be 15m for balcony railing repairs ] |
| 13 | S&F Structural steel works as in tubular roof trusses, purlins, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , MS plate, riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A complete all spd and as directed. |
| 14 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 15 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 16 | S&F Mild steel works as in wind ties for roof including securing bolts, all necessary drilling etc and similar work conforming to Fe-290 Gde E-165 |
| 17 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets |
| 18 | Providing & fixing false ceiling atall heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm with semi perforated 12mm thick micro tegular edge GRG false ceiling tiles of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 19 | Supply and fixing in repairs tank top cover (lid) white with locking arrangement complete of suitable for 500 ltr to 1000 ltr capacity all as specified and directed. |
| 20 | Taking down existing roof treatment & felt cleaning the surface by hacking to receive plaster and removing demolished material outside MD land etc. complete all as specified and directed. |
| 21 | Demolition of unreinforced Concrete of any description and any position not otherwise specifically provided &removing debris outside MOD land. |
| 22 | M&L for PCC 1:2:4 B-0 using 12.5mm graded stone aggregate as levelling course to finished even and smooth with using extra cement.all as specified |
| 23 | M/L for rendering 10mm thick on CM (1:3) on concrete roof top and chajjas surface finished even and smooth to get uniform level surface for laying of membrane treatement,with using water proofing compound. |
| 24 | M&L for APP modified roof treatment over exissting RCC roof in repairs complete all as specified and as directed by engineer -in-charge and as specified hereunder (a) Applying bitumen primer @ 0.40 lit/sqm with density of 0.87 kg/lit at 25 degree C on the prepared dry roof surface (b) Laying 4mm thick APP membrane including aluminium layer on top, weight not less than 3.50 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorised applicator of manufacturer of APP membarane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 kg/sqm prescribed by manufacturer including taking down and refixing any elecric cables, outlet of AC's without any damage & wothout any extra cost etc all as specified. |
| 25 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in plinth protection finishing even and smouth without using extra cement. |
| 26 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) including iron mongry and removing from site complete all as specified and directed. |
| 27 | Taking down chowkats or frame exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames). |
| 28 | Taking down shutters only of any description exc 1sqm and n exc 2 sqm each |
| 29 | M& L for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight,mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling,Aluminium composite panel,C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief. |
| 30 | S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work all as specified and as directed by Engr-in-Charge |
| 31 | S & F in repairs Double action floor spring Hydrauilically regulated made up of minimum 1.25 mm thick aluminium alloy sheeet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 32 | S&F in repairs brass mortice lock, vertical type, size 100 mm , 4 levers with 2 keys |
| 33 | S&F of Aluminium (extruded section) Door closer hydraulically regulated, designation No.1 universal type, suitable for door shutters up to 1000 mm in width and of weight not more than 35 kg and fixed |
| 34 | S & F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lapping/fixed in Aluminium section for windows doors etc in square not exc 0.58 Sqm each in each pane all as specified and as directed. |
| 35 | S & F 3 mm thick Figure glass/ tinted glass ordinary quality and glazing with oil putty/wooden lapping in square not exc 0.58 Sqm each in each pane, lovers etc all as specified and as directed. |
| 36 | S&F for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 37 | S&F for Pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified. |
| 38 | S&F 30 mm thick flush shutters, solid core construction, with Block board core and plywoood face panels, commercial type on both sides with one face is covered with decorative face veneer with lipping/frame to match complete all as directed. |
| 39 | S&F for 35mm thick 2nd class hard wood glazed and skelton shutters divided into squares with plain chamfered or rounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats. |
| 40 | M&L for prepartion new wooden surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamed paint over a coat of pink primer. |
| 41 | M&L for preparation of old wooden surfaces of any description, not otherwise described over 10 cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed |
| 42 | S&F door sliding bolt aldrop 250 mm long aluminium anodised all as per direction of Eng-in-charge. |
| 43 | S&Fin repair mild steel 300mm ordinary rat tail rod pettern springs including roller and roller plate complete |
| 44 | S&F aluminium andodized, 150mm length of bolt barrel tower bolts of extruded section. |
| 45 | S&F aluminium andodized, 75 mm length of bolt barrel tower bolts of extruded section. |
| 46 | M& L for Floor door stopper 150mm long , of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 47 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified. |
| 48 | S & F MS butt hinges 100 mm size cold rolled medium weight and fixed as directed and specified. |
| 49 | S & F Aluminium handles cast moulded type 150mm size fixed with screws. |
| 50 | M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, suppling & fixing will be painted to match with printed sheed. |
| 51 | M&L for factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 52 | S&F in repairs Fatory made PVC Internal door Frame manufractured BY of the size 120mmx50mm(double door Frame) with a wall thickness of 5mm PVC Celuka Sheet of density 600Kg/Cbm manufractured by an ISO-9000 certified company, made out of extruded 5mm PVC Celuka sheet, mitre cut at two corners and joined with two Nos, of 150mm long brackets of 15mmx15mm M.S Square tube. The two vertical door profiles are to be reinforced with 20mm x20mm M.S tube of 19 guage throughout the frame. The door frame shall be fixed to the wall using 65/100mm long M.S screws through the frame by using PVC Fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufractures specification and direction of Engr-in-charge |
| 53 | S&F in repairs 30mm thick Rajshri brand factory made internal PVC one side Prelem door shutter wood Free consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles as well as top bottom & lock rail. The inside panel shall consist of 20mm thick multi chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement adhesive with 5mm (+0.5) thick prelam PVC sheet of the inside panel. All the four edge of the panel to be sealed with lipping of 10mm thick & 20 mm wide PVC sheet baton(made by sticking 02 Nos. rigid foam PVC sheets of 5mm (+0.5) thickness using PVC solvent cement adhesive. 20mm thick (5mm x 4 Nos) Thick PVC sheet to be given for lock provision at lock provision at lock height. Complete as per direction of Engr-in-charge, manufractures specification and drawing |
| 54 | S&F in repairs 30mm thick brand factory made wire mesh solid PVC door shutter consisting of frame made out of M.S tubes of 19 guage thickness and size of 20mm x 20 mm for stiles and 15mm x 15mm for top, lock & bottom rails. 20mm x 20mm M.S square tubes shall be covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 90mm width out of which 75mm shall be flat and 15mm shall be PVC beading on either side forming stiles & 5mm thick 115mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on the inner side to from top and bottom rail and 130mm wide PVC sheet out of which 100mm shall be flat and 15mm shall be PVC beading on from lock rail 10mm (5mm x2) thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail. Panel will be Alumunium wire mesh fitted in by 'C' channel of size 35mm x 10mm on the eitherside in stiles. The inner side 'C' channel is fixed by 20mm x 20mm M.S. tube on both sides with screws. The wire mesh in top, bottom & lock rail is sealed with total 8 Pars of 15mm x 15mm & 20mm x 20mmtube with Aluminium wire 10mm (5mm x 2) thick PVC strip of 25mm width is to be stuck & nails on both side of Aluminium wire mesh interior at the top, bottom & lock rail. Complete as per direction of Engr-in-charge, manufractures specification and drawing |
| 55 | M&L for aluminium window with double side hung shutter for glazing and gauging and frame with one or more rebates made out of anodised aluminium section including section for fixing of aluminium grills with suitable fixtures, jointing cleats for fixing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium beading screws, type B20 100mm long suitable handle, 75mm long tower bolt and anodised aluminum fittings such as stay, 75mm long Butt hinges glazing with 5 mm thick tinted sheet glass fixed with Solar control film 25 micron reflective type and gauging with aluminium wire cloth of size 0.45mm dia of wire and 1.40mm aperture as per drg No. CEAA/TD/133 sheet No. 1/2 and 2/2 dated 13.12.02 except fixed glazing (FG) all as specified and directed.(Tint of glass shall be approved by GE) Note :- Aluminium grill fixed under above item shall be measured and paid separately |
| 56 | S&F 18mm thick prelaminated PVC celuka Ply prelaminated one side with decorative choice lamination and other side plain fixed with screw to PVC celuka ply works |
| 57 | All as per item No 56 above but 18mm thick plain PVC celuka ply |
| 58 | All as per item No 57 above but 12mm thick plain PVC celuka ply |
| 59 | All as per item No 58 above but 05mm thick plain PVC celuka ply |
| 60 | S&F PVC coated basket for kitchen drawers of required size and including sliding channels |
| 61 | S&F 100mm size extruded, brass handle fabricated type polished complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F 75mm size butt hinges,cast brass with mild steel hinge pin bright polished complete all as specified and directed by Engineer-in-Charge. |
| 63 | Demolition of cement concrete in any description and in any position, not otherwise specifically provided for complete all as specified and directed incl removal of demolished material exc 1.5 km to 5 km |
| 64 | M & L for Pre-cast cement concrete type B1,1:2:4 (20mm graded stone aggregate) block masonry with solid blocks,exc 10 cm in width and setting in mortar |
| 65 | Taking down cement plaster of any description in patch work including racking out joints, hacking for key and disposing of debris out side MD land including 10m height steel scaffolding complete. |
| 66 | M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete. |
| 67 | M&L for applying two coats of oil bound distemper over a coat of Chalk whiting on previously untreated surfaces wall care putty1.5 mm thick of wall including preparation complete. |
| 68 | M&L for 15 mm thick cement plaster on stone or concrete surfaces in CM 1:4 mixed with water proofing compound @ 3% by weight of cement including 10m height steel scaffolding and to be finished even and smooth with all using extra cement complete. [Note:- WPC shall be measured and paid separately ] |
| 69 | Supply of integral water proofing compound |
| 70 | M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 18m height steel scaffolding complete all as specified by GE/Engineer-in-Charge. |
| 71 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 72 | M&L Screed bed or bedding layer or mortar 15mm layer for laying floor finishes in CM 1:6 |
| 73 | M&L for light shade vitrified Ceramic tiles lightshade 8 to10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge. |
| 74 | M&L for light shade vetrified ceramic tiles 8 to10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match as approved by Engr-In-Charge. |
| 75 | M&L for rendering 10mm thick in CM 1:3 as backing coat on wall surface incl preparation of surfaces to receive dado finished. |
| 76 | M&L for 450x300 x 7mm thick glazed coloured ceramic wall tiles/ digital tiles as in vertical surface and jointed in neat cement slurry and pointed in white or coloured cement to match pattern approved by Engr-in-Charge |
| 77 | M& L for Non - skid Ceramic Coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry andpointed in white or coloured cement to match |
| 78 | Demolition of stone slabs / PCC tiles of any description or thickness in floors, aprons etc incl removal of demolished material exc 1.5 km to 5 km |
| 79 | M & L for Granite (of any type) 20 mm thick machine cut,bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing on floor & Kitchen platform etc complete. |
| 80 | M & L for Machine cut cudappah stone slab 20 to 25 mm thick over cement screed bed , laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and pointing complete. |
| 81 | M & L for rounding the edges of stone slabs one edge, such as in steps, cooking platform and other simillar situations |
| 82 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing etc complete |
| 83 | M & L in repairs stainless steel 'L' shape soft closing spring hinges for cabinets shutters ISI Marked complete all as specified and directed by Engr-in-Charge |
| 84 | M & L in repairs GI push and pull channel brand of size 20\\"(51 CM) length for modular cabibets complete all as specified and directed by Engr-in-Charge |
| 85 | M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of walls and applying one coat of distemper oil emulsion over primer ( as approved by GE) complete all as specified and directed.After Perodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away. |
| 86 | M&L for preparation of Old plastered or unplastered washing, rubbing down and stopping of distemper and painted surfaces of Ceiling and applying one coat of white wash complete all as specified and directed.After Perodical service of the Qtr/building the contractor will clean all the paint marks from glass panes , electric switch boards and fittings , doors windows and should clean the floor , dado and all scraped material shall thrown away. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender