Defence Statutory Bodies & Commissions/Committees Closing in 10 days TDR #58361805

Tender For Addition / Alteration And Special Repair To Certain Offrs, Jcos, Or Md Accn At Shahjahanpur Cantt

Issued by Statutory Bodies & Commissions/Committees · Bareilly, Uttar Pradesh
Tender Value
8.38 Crore
Estimated cost
Bid Submission
02 Dec 2026
10 days left
EMD
7.44 Lakhs
Bank guarantee accepted
Document Fee
3000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Addition / Alteration And Special Repair To Certain Offrs, Jcos, Or Md Accn At Shahjahanpur Cantt

BOQ

Name of Work:- ADDITION / ALTERATION AND SPECIAL REPAIR TO CERTAIN OFFRS, JCOS, OR MD ACCN AT SHAHJAHANPUR CANTT
Sl. No. Item Description
1Demolition of brick work or stone/boulder masonary built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
2M&L Brick work using old size bricks with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
3M&L for brick work with old size burnt clay bricks, built in CM (1:4) in half brick thick walls complete all as specified and directed.
4Taking down cement plaster any description on brick or stone walls or wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.
5M&L for rendering 10mm thick internal surfaces on fair faces of brick work with ready mix platering material as directed by Engr-in-charge.
6M&L for rendering 15mm thick external surfaces on brick/concrete with ready mix platering material finished even and fair without using extra cement with WPC 3% by wt of cement. Note:-WPC measured and paid separatly
7M&L for rendering 5 mm thick with ready mix platering material on fair faces of brick or concrete surface of ceiling finished even and smooth without using extra cement complete all as specified and directed.
8M& L for two coat of oil bound distemper incl preparation of old treated surface of wall including 1 mm thick wall care putty with airless electric sprayers prepared and sanded with electrically operated machine complete all as specified and as directed.
9M & L for two coat of oil bound distemper incl preparation of new surface of wall incl 1 mm thick wall care putty with airless electric sprayers prepared and sanded complete all as specified and as directed.
10M&L for for complete removal of existing treatment and applying of two coat OBD on ceiling including complete removal of old finishes and preparation of surface with airless electric sprayers prepared and sanded complete all as specified and directed .
11M&L for preparing newly plastered surfaces and applying two coat OBD on ceiling incl preparation of surface with airless electric sprayers prepared and sanded complete all as specified and directed .
12M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls and applying two coat of white putty and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
13M&L for preparation of new plastered or unplastered surfaces of walls and applying two coat of white putty and applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives over one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower complete all as specified and directed. Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.
14M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for rough finished surfaces of concrete flat, complete all as specified and directed.
15M&L for reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified and directed.(Note - Reinforcement to be measured and paid under respective items)
16Supply and fixing TMT bars, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia, complete all as specified and directed. Please Enable Macros to View BoQ information
17Supply and fixing TMT bars, 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia, complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58361805
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 8.38 Crore
LAST DATE 02-12-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Addition / Alteration And Special Repair To Certain Offrs, Jcos, Or Md Accn At Shahjahanpur Cantt
Basic Detail
Tender No CEBZ/BLY/T-42 OF 2026-27
Bidding Type Tender
Location
City Bareilly
State Uttar Pradesh
Key Dates
Publish Date 03 Nov 2026
Submission Date 02 Dec 2026
Open Date 09 Dec 2026
Finance
Tender Value 8.38 Crore
Tender Fee 3000
EMD 7.44 Lakhs
Exemption Available
Document List
2b98236d-23a6-47a9-a26a-a291b527f235.html
BOQ_894131.xls
doc.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 03, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Dec 02, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 10 days
Dec 09, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 17 days

Tender Documents

Download All (ZIP) ↓
html

2b98236d-23a6-47a9-a26a-a291b527f235.html

xls

BOQ_894131.xls

pdf

doc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender