Tender For special Repair To External Water Supply Pipe Line With Allied Infra At Rampur Under Ge 969 Ews.
Tender Value
24.27 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
48540
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair To External Water Supply Pipe Line With Allied Infra At Rampur Under Ge 969 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Taking up or down old unserviceable GI/MS tubing and connetions including all fittings from the trenches , wall , floor etc complete as directed. |
| 2 | (a) 20 mm bore size |
| 3 | (b) 25 mm bore size |
| 4 | (c) 40 mm bore size |
| 5 | (c) 50 mm bore size |
| 6 | (d) 80 mm bore size |
| 7 | (e) 100 mm bore size |
| 8 | (e) 150 mm bore size |
| 9 | S&F 150 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 10 | S&F 100 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 11 | S&F 80 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 12 | S&F 50 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 13 | S&F 40 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 14 | S&F 25 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 15 | S&F 20 mm bore GI water tubing, medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc., laid in floors or fixed to walls, complete all as specified and as directed. |
| 16 | Supply and Fix Gun metal globe or gate valve non rising spindle heavy duty with iron wheel head, screwed both end for connection GI pipes complete all as specified for the following sizes of pipe (ISI Marked) including dismantling of unserviceable, complete all as specified and as directed. |
| 17 | (a) GI tubing 20 mm dia bore |
| 18 | (b) GI tubing 25 mm dia bore |
| 19 | (c) GI tubing 50 mm dia bore |
| 20 | Cast iron sluice valve class PN 1.6 CONFORMING TO is-14846, ISI marked with brass spindle complete with flanged ends incl necessary nuts, bolts, washers and rubbers gaskets, 3mm thick heavy and iron wheel complete with jointing materila incl taking out old unserviceable sluice valve of 150 mm dia size, complete all as specified and as directed. |
| 21 | S&F Non return valve of size 150 mm ISI marked including complete fitting item with jointing materials such as nuts, bolts, washers and rubber gasket etc of suitable size, complete all as specified and as directed. |
| 22 | Bends (any type, radius and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces single branch. \\"Y\\" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs upto 150 mm dia, complete all as specified and as directed. |
| 23 | M&L for construction of brick valve pit of size (0.9Mx0.9Mx1.5M) internal dimensions including all excavation and earth work in any type of soil and disposal of soil to a distance of not existing 50 mtr and depositing all as directed including 10 mm plastering internally in cement mortar 1:4, 100mm thick at with angle iron frame (25x25x3mm), Mild steel black sheet plates plain channels of 4mm thickness including handle, locking arrangement will be provided including two coats of synthetic enamel paint over a coat of red oxide primer on sheet surface, complete all as specified and as directed. |
| 24 | M&L for construction of brick valve pit of size (0.6Mx0.6Mx0.6M) internal dimensions including all excavation and earth work in any type of soil and disposal of soil to a distance of not existing 50 mtr and depositing all as directed including 10 mm plastering internally in cement mortar 1:4, 100mm thick at with angle iron frame (25x25x3mm), Mild steel black sheet plates plain channels of 4mm thickness including handle, locking arrangement will be provided including two coats of synthetic enamel paint over a coat of red oxide primer on sheet surface, complete all as specified and as directed. |
| 25 | M&L for cutting of existing road 3.75m and laying of 1:4:8 type D-2 PCC under 100 mm bore with 1:3:6 PCC including packing under hauching against the sides of pipe 1:2:4 not exceeding 25 cm etc, complete all as specified and as directed. |
| 26 | Lagging to pipes used in external RM in external water supply or plumbing all around 25 mm thick bended mineral weel preformed \\" SNAPON\\" pipe section of density 144 Kg/sqmm on confirming to IS-9042 of 25 mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01mm aluminium foil, complete all as specified and as directed. |
| 27 | Lagging to pipes used in external RM in external water supply or plumbing all around 25 mm thick bended mineral weel preformed \\" SNAPON\\" pipe section of density 144 Kg/sqmm on confirming to IS-9042 of 20 mm dia provided with chicken mesh wire netting 25 gauge, 20mm mesh and with 0.01mm aluminium foil, complete all as specified and as directed. |
| 28 | Disconnecting the defective/burnt electric induction motor & dismantling from the foundation, shifting to workshop for rewinding the electric induction motors suitable to run on 415V, AC, 50Hz supply with copper enameled copper wire of suitable gauge/size including proper insulation, warnishing, drying, greasing bearing, etc and making connection to the terminal plate complete for the motor 10HP to 30 HP of electric motor, complete all as specified and as directed. |
| 29 | Supply and fixing MS flange suitable for 150 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick, complete all as specified and as directed. |
| 30 | Supply and fixing MS flange suitable for 80 mm bore GI pipe line inlcuding welding with pipe , nuts , bolts gasket 6 mm thick, complete all as specified and as directed. |
| 31 | M&L for replacing old pea gravel with new one of size 12.5mm in layers not exceeding 15cm thick including cleaning and washing of filter media, complete all as specified and as directed. |
| 32 | M&L for replacing old pea gravel with new one of size 20mm in layers not exceeding 15cm thick including cleaning and washing of filter media, complete all as specified and as directed. |
| 33 | M&L for replacing old pea gravel with new one of size exceeding 1.5mm and not exceeding 4.75mm in layers not exceeding 15cm thick including cleaning and washing of filter media, complete all as specified and as directed. |
| 34 | M&L for proving gravel of coarse sand of size not exceeding 1.18mm in layers not exceeding 15cm thick including cleaning and washing of filter media, complete all as specified and as directed. |
| 35 | Cutting of existing GI pipe line of size upto 150 mm dia and inseting new pipe line including all fittings, complete all as specified and as directed. |
| 36 | Excavation in trenches in soft/loose soil n.exc. 1.5M wide & n exc 1.5M deep for laying of GI/CI pipe line & getting out including forming bottom surface, complete all as specified and as directed. |
| 37 | Returning, filling in, trenches including spreading, levelling, watering and well ramming in layer n.exc. 250 mm in any type of soil after the pipe laid & tested, complete all as specified and as directed. |
| 38 | Removing excavated surplus soil to a distance n.exc. 50mtr and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and as directed. |
| 39 | Note:- Schedule of credit Rs 52,025.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 03, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender