Defence Statutory Bodies & Commissions/Committees Closing in 1 days TDR #58361758

Tender For Provision Of An Additional Gate For 49 Nos Residential Quarters At Newtown Kolkata Provision Of Gate Along With Associated Fittings For Entrance And Exit To Comcg Deck Area And Reinforced Cement Concrete Drain At Cgre Manicktala Under Ge (

Issued by Statutory Bodies & Commissions/Committees · Kolkata, West Bengal
Tender Value
28 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
1 days left
EMD
56000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Provision Of An Additional Gate For 49 Nos Residential Quarters At Newtown Kolkata Provision Of Gate Along With Associated Fittings For Entrance And Exit To Comcg Deck Area And Reinforced Cement Concrete Drain At Cgre Manicktala Under Ge (I) (Cg&N) Kolkata

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 16-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 23-Nov-2026

BOQ

Name of Work:- PROVISION OF AN ADDITIONAL GATE FOR 49 Nos RESIDENTIAL QUARTERS AT NEWTOWN KOLKATA PROVISION OF GATE ALONG WITH ASSOCIATED FITTINGS FOR ENTRANCE AND EXIT TO COMCG DECK AREA AND RCC DRAIN AT CGRE MANICKTALA UNDER GE (I) (CG&N) KOLKATA
Sl. No. Item Description
1Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, complete all as directed.
2M&L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
3M&L for Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5 m in depth and 3 m deep as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-incharge
4M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and as directed.
5M & L for plain cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived fromnatural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) for foundations complete all as specified and as directed.
6M&L for Mild steel TMT bars, 10 mm dia and over cut to length bent to shape required , including cranking , bending, spirally for hooping for columns , hooking ends and binding with mild steel wire (annealed) not less 0.9mm dia of securing with clips complete all as specified and as directed.
7M&L for Mild steel TMT bars, of 5 mm dia and over upto and including 10mm dia, cut to length bent to shape required , including cranking , bending, spirally for hooping for in stirrups, spacers and binders complete all as specified and as directed.
8Use & waste of formwork to sides of foundations,pile cap, footing,grid beam,plinth beam etc of Rough finished square, rectangular or polygonal surface complete all as specified and as directed.
9Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.
10M & L for Reinforced Cement Concrete (Design Mix) of M30 grade concrete in foundation including raft, foundation beams, plinth beam, bases for columns etc footing basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
11M & L for design Mix RCC M30 grade concrete with 20mm down graded aggregate in columns, pillars, piers, posts and struts etc. complete all as specified and directed.
12M&L for brick work sub class 'B' bricks, straight or curved on plan, exc 6m mean radius built in CM (1:4) complete all as specified and as directed.
13M & L for 20 mm thick plastering in cement mortar (1:4) on external fair faces or Brick walls or on concrete surfaces plastered surfaces finished even and smooth without using extra cement with WPC complete all as specified and directed.
14M&L for Granite (of any type) work of 20mm thick (table rubbed and polished) in steps, jambs, pillars, win- dow-cills, cooking plat- forms and like over screed bed 20 mm thick in cement mortar (1:4) including point- ing in white cement (1:2) us- ing marble dust with admix- ture of pigment to match with shade of granite complete all as specified and as directed
15S&F MS Framed work Fe-290 Gde-165 as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all specified and as directed.
16M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
17M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar(1:3), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified as directed.
18M&L for Cement concrete 100 mm thick Type C2 (1:3:6) 20 mm graded stone aggregate as in floor finish concrete surface even and rough finish to receive topping layer complete all as specified and as directed.
19M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.
20M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade complete all as specified and as directed.
21Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels ete. including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4 mm thick aluminium composite panel material consisting of 3 mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5 mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
22Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.
23M&L for Plain Cement Concrete (1:2:4) Type B1 (using 20 mm graded granite stone aggregate) as in coping including necessary form work and complete all as specified and as directed.
24Material and labour for precast cement concrete slab for manhole covers RCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate complete all as specified and as directed.
25M & L for preparing new surfaces and applying three coats of white wash on walls complete all as specified all as specified and as directed
26M & L for concealed type point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated un sheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC conduit medium duty (ISI marked) not less than 20 mm dia with accessories such as bends, cross, elbow, tees etc. of suitable size including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sq mm(nominal area) copper multi-stranded conductor, 1100 Volts grade, connecting to common earth and earth dolly for Light/Ceiling fan/Exhaust fan/call bell point complete all as specified and as directed.
27S & F 6 Amps one way single pole switch modular type complete all as specified and as directed.
28M & L Ceiling rose, surface type polycarbonate/ PVC three terminals, for tube light, conforming to IS complete all as specified and as directed.
29S & F modular metal box 6 module complete all as specified and as directed.
30S & F modular white cover plate with frame 6 way complete all as specified and as directed.
31S & F of Flood light 120W with minimum system efficiency 100 lum/W including electronic driver and all fixing arrangement complete all as specified and as directed.Note: Warranty Certificate for 5 yrs to be submitted to the department.
32Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with minimum system efficiency 100 lum/W with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including all necessary fixing equipments all as specified and as directed . Note: Warranty Certificate for 5 yrs to be submitted to the department. Please Enable Macros to View BoQ information
33Supply and fixing LED street light fitting 120 Watt 230 V AC outdoor type with minimum system efficiency 100 lum/W with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. including all necessary fixing equipments all as specified and as directed . Note: Warranty Certificate for 5 yrs to be submitted to the department. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58361758
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 28 Lakhs
LAST DATE 23-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender for Provision Of An Additional Gate For 49 Nos Residential Quarters At Newtown Kolkata Provision Of Gate Along With Associated Fittings For Entrance And Exit To Comcg Deck Area And Reinforced Cement Concrete Drain At Cgre Manicktala Under Ge (I) (Cg&N) Kolkata
Basic Detail
Tender No 8701/27/2026-2027/E8
Bidding Type Tender
Location
City Kolkata
State West Bengal
Key Dates
Publish Date 16 Nov 2026
Submission Date 23 Nov 2026
Open Date 24 Nov 2026
Finance
Tender Value 28 Lakhs
Tender Fee 500
EMD 56000
Exemption Available
Document List
61f6d1dc-1bbf-48bc-8b4e-0459ec4c6857.html
BOQ_894151.xls
tenderdoc.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 16, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 23, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 1 day
Nov 23, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 1 day
Nov 24, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 2 days

Tender Documents

Download All (ZIP) ↓
html

61f6d1dc-1bbf-48bc-8b4e-0459ec4c6857.html

xls

BOQ_894151.xls

pdf

tenderdoc.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender